A combined numerical and experimental technique for estimation of the forces and moments in the lumbar intervertebral disc

Evaluation of the loads on lumbar intervertebral discs (IVD) is critically important since it is closely related to spine biomechanics, pathology and prosthesis design. Non-invasive estimation of the loads in the discs remains a challenge. In this study, we proposed a new technique to estimate in vivo loads in the IVD using a subject-specific finite element (FE) model of the disc and the kinematics of the disc endplates as input boundary conditions. The technique was validated by comparing the forces and moments in the discs calculated from the FE analyses to the in vitro experiment measurements of three corresponding lumbar discs. The results showed that the forces and moments could be estimated within an average error of 20%. Therefore, this technique can be a promising tool for non-invasive estimation of the loads in the discs and may be extended to be used on living subjects.     

Diurnal fluid expression and activity of intervertebral disc cells

The intervertebral discs are large cartilaginous structures situated between the vertebral bodies, occupying around one third of the length of the spinal column. They act as the joints of the spine and carry mechanical load arising from body weight and muscle activity. Loads change with every alteration of posture and activity and the discs thus undergo a diurnal loading pattern with high loads on the discs during the day's activity and low loads on it at night during rest. As the disc is an osmotic system, around 25% of the disc's fluid is expressed and re-imbibed during each diurnal cycle with consequent changes in the osmotic environment of the disc cells. Here, present information on the effect of osmotic changes in disc cell metabolism is reviewed; results indicate that prevailing osmolarity is a powerful regulator of disc cell activity.     

Effect of microgravity on the biomechanical properties of lumbar and caudal intervertebral discs in mice

Prolonged exposure to microgravity has shown to have deleterious effects on the human spine, indicated by low back pain during spaceflight and increased incidence of post-spaceflight herniated nucleus pulposus. We examined the effect of microgravity on biomechanical properties of lumbar and caudal discs from mice having been on 15-day shuttle mission STS-131. Sixteen C57BL/C mice (spaceflight group, n=8; ground-based control group, n=8) were sacrificed immediately after spaceflight. Physiological disc height (PDH) was measured in situ, and compressive creep tests were performed to parameterize biomechanical properties into endplate permeability (k), nuclear swelling pressure strain dependence (D), and annular viscoelasticity (G). For caudal discs, the spaceflight group exhibited 32% lower PDH, 70% lower D and crept more compared to the control mice (p=0.03). For lumbar discs, neither PDH nor D was significantly different between murine groups. Initial modulus, osmotic pressure, k and G for lumbar and caudal discs did not appear influenced by microgravity (p>0.05). Decreases in both PDH and D suggest prolonged microgravity effectively diminished biomechanical properties of caudal discs. By contrast, differences were not noted for lumbar discs. This potentially deleterious interaction between prolonged weightlessness and differential ranges of motion along the spine may underlie the increased cervical versus lumbar disc herniation rates observed among astronauts.     

Biomechanical comparison between fusion of two vertebrae and implantation of an artificial intervertebral disc

Surgical treatments for lower back pain can be distributed into two main groups: fusion (arthrodesis) and disc replacement (arthroplasty). The objective of this study was to compare, under severe loading conditions, the biomechanics of the lumbar spine treated either by fusion or total disc replacement (TDR). A three-dimensional model of a two-level ligamentous lumbar segment was created and simulated through static analyses with the finite-element method (FEM) software ABAQUS. The model was validated by comparing mobility, pressure on the facets, force in the ligaments, maximum stresses, disc bulge, and endplate deflection with measured data given in the literature. The FEM analysis predicted that the mobility of the model after arthrodesis on the upper level was reduced in all rotational degrees of freedom by an average of approximately 44%, relative to healthy normal discs. Conversely, the mobility of the model after TDR on the upper level was increased in all rotational degrees of freedom by an average of approximately 52%. The level implanted with the artificial disc showed excessive ligament tensions (greater than 500 N), high facet pressures (greater than 3 MPa), and a high risk of instability. The mobility and the stresses in the level adjacent to the arthroplasty were also increased. In conclusion, the model for an implanted movable artificial disc illustrated complications common to spinal arthroplasty and showed greater risk of instability and further degeneration than predicted for the fused model. This modeling technique provides an accurate means for assessing potential biomechanical risks and can be used to improve the design of future artificial intervertebral discs.     

应用反向滤过及迭代重建方法评估标准放射剂量与低剂量颈椎 CT图像质量的对比研究

目的：利用反向滤过重建（filtered back-projection,FBP）及迭代重建（iterative reconstruction,IR）方法评估标准剂量及低剂量 对颈椎CT 图像质量的影响。方法：40 例受检对象行颈椎CT 检查,将其随机分为两组：标准剂量组（SD,120 kVp, 275 mAs）及低 剂量组（LD,120 kVp,150 mAs）,随机选择管电流值,所有数据均行FBP 及IR 重建。测量C3 C4 及C6 C7 椎间盘水平椎间盘、脊 神经、脊髓、韧带以及周围软组织的图像噪声值（Image noise,IN）,信噪比（signal-to-noise,SNR）及对比信噪比（contrast-to-noise, CNR）。结果：在测量的各椎间盘水平,迭代重建的信噪比及对比噪声比要明显高于反向滤过重建方法,并有效的降低了图像噪 声。低剂量迭代重建图像与标准剂量反向滤过图像相比无明显统计学意义。排除剂量及扫描层面的影响,椎间盘、脊神经及韧带 的图像质量,迭代重建评分要明显高于反向滤过重建,结果具有统计学差异;而低剂量迭代重建图像质量评分与标准剂量反向滤 过重建相比无明显差异。软组织及椎体的图像质量,迭代重建图像质量评分要低于反向滤过重建方法,结果具有统计学差异;而 低剂量迭代重建图像质量评分与标准剂量反向滤过重建相比无明显差异。整体病例图像质量评分,迭代重建方法要高于反向滤 过重建方法,低剂量迭代重建方法要高于标准剂量反向滤过重建方法。结论：应用低剂量扫描方式以及迭代重建方法进行颈椎 CT 检查可以为临床提供较好的图像质量,对于椎间盘、脊神经、脊髓显示较好,对于周围软组织以及椎体来说,图像质量相对较 差,同时可以降低大约40%的放射剂量。     

应用反向滤过及迭代重建方法评估标准放射剂量与低剂量颈椎CT图像质量的对比研究

目的：利用反向滤过重建（filtered back-projecfion,FBP）及迭代重建（iterative reconstruction,IR）方法评估标准剂量及低剂量对颈椎CT图像质量的影响。方法：40例受检对象行颈椎CT检查,将其随机分为两组：标准剂量组（SD,120kVp,275mAs）及低剂量组（LD,120kVp,150mAs）,随机选择管电流值,所有数据均行FBP及IR重建。测量C3C4及C6C7椎间盘水平椎间盘、脊神经、脊髓、韧带以及周围软组织的图像噪声值（Imagenoise,IN）,信噪比（signal—to—noise,SNR）及对比信噪比（contrast—to—noise,CNR）。结果：在测量的各椎间盘水平,迭代重建的信噪比及对比噪声比要明显高于反向滤过重建方法,并有效的降低了图像噪声。低剂量迭代重建图像与标准剂量反向滤过图像相比无明显统计学意义。排除剂量及扫描层面的影响,椎间盘、脊神经及韧带的图像质量,迭代重建评分要明显高于反向滤过重建,结果具有统计学差异;而低剂量迭代重建图像质量评分与标准剂量反向滤过重建相比无明显差异。软组织及椎体的图像质量,迭代重建图像质量评分要低于反向滤过重建方法,结果具有统计学差异;而低剂量迭代重建图像质量评分与标准剂量反向滤过重建相比无明显差异。整体病例图像质量评分,迭代重建方法要高于反向滤过重建方法,低剂量迭代重建方法要高于标准剂量反向滤过重建方法。结论：应用低剂量扫描方式以及迭代重建方法进行颈椎CT检查可以为I临床提供较好的图像质量,对于椎间盘、脊神经、脊髓显示较好,对于周围软组织以及椎体来说,图像质量相对较差,同时可以降低大约40％的放射剂量。     

An accurate finite element model of the cervical spine under quasi-static loading

Cervical disc injury due to impact has been observed in clinical and biomechanical investigations; however, there is a lack of data that helps to elucidate the mechanisms of disc injury during these collisions. Therefore, it is necessary to understand the behavior of the cervical spine under different types of loading situations. A three dimensional finite element (FE) model for the multi-level cervical spine segment (C0-C7) was developed using computed tomography (CT) data and applied to study the internal stresses and strains of the intervertebral discs under quasi-static loading conditions. The intervertebral discs were treated as nonlinear, anisotropic and incompressible subjected to large deformations. The model accuracy was validated by comparing it with previously published experimental and numerical results for different movements. It was shown that the use of a fiber reinforced model to describe the behavior of the annulus of the discs would predict higher maximum shear strains than an isotropic one, being therefore important the use of complex constitutive models in order to be able to detect the appearance of injured zones, since those strains and stresses are supposed to be related with damage to soft tissues. Several movements were analyzed: flexion, extension and axial rotation, obtaining that the maximum shear stresses in the disc were higher for a flexo-extension movement.     

The effects of different articulate curvature of artificial disc on loading distribution

Purpose: Deeper insights into the mechanical behavior of lumbar disc prostheses are required. Prior studies on the biomechanical performance of artificial discs were mostly performed with finite element analyses, but this has never been analyzed with altering articulate curvature. This study aimed to ascertain the influence of the geometry of a ball-and-socket disc prosthesis for the lumbar spine. Materials and Methods: Three-dimensional finite element model of human L4-L5 was reconstructed. Convex, concave, and elliptic artificial disc models were also established with Computer-Aided-Design software. Simulations included: (1) three articulate types of polyethylene (PE) insert were implanted inferiorly and (2) concave and convex PE inserts were implanted on the superior or inferior sides in flexion/extension, lateral bending, and axial rotation in the lumbar spine. Shear stresses and von Mises stresses on PE insert were assessed for their loading distributions. Results: High shear stresses of all articulate types occurred in flexion, and convex PE insert performed the maximum stress of 23.81 MPa. Under all conditions, stresses on concave PE inserts were distributed more evenly and lower than those on the convex type. Elliptic geometry enabled confining the rotation of the motion unit. The shear force on the convex PE insert on the inferior side could induce transverse crack because the shear stress exceeded yielding shear stress. Conclusions: The concave PE insert on the inferior side not only decreased loading concentration but had relatively low stress. Such a design may be applicable for artificial discs.     

Vertebral end-plate fractures as a result of high rate pressure loading in the nucleus of the young adult porcine spine

In a healthy spine, end-plate fractures occur from excessive pressurization of the intervening nucleus. Younger spines are most susceptible to such type of injury due to the highly hydraulic nature of their intervertebral discs. The purpose of this paper was to confirm this fracture mechanism of the healthy spine through the pressurization of the nucleus in the absence of external compressive loading. Sixteen functional porcine spine units were dissected and both injection and pressure transducer needles were inserted into the nucleus of the intervertebral disc. Hydraulic fluid was rapidly injected into the nucleus until failure occurred. Peak pressure and rate of pressure development were monitored. Spine units were dissected to determine the type and location of fracture. Fifteen of the 16 spine units fractured (the remaining unit had a degenerated disc). Of the 15 fractures, 13 occurred at the posterior margin of the end-plate along the lines of the growth plates. A slightly exponential relationship was found between peak pressure and its rate of development (R(2) = 0.544). Also, in each of the growth-plate fractured specimens, nuclear material was forcefully emitted, during fracture, from the intervertebral disc into the vertebral foramen. The posterior end-plate fractures produced here are similar to those often seen in young adult humans. This provides insight into a mechanism of fracture development through pressurization of the nucleus that might be seen in older adolescents and younger adults during athletic events or mild trauma.     

Biomechanical implications of lumbar spinal ligament transection

Many lumbar spine surgeries either intentionally or inadvertently damage or transect spinal ligaments. The purpose of this work was to quantify the previously unknown biomechanical consequences of isolated spinal ligament transection on the remaining spinal ligaments (stress transfer), vertebrae (bone remodelling stimulus) and intervertebral discs (disc pressure) of the lumbar spine. A finite element model of the full lumbar spine was developed and validated against experimental data and tested in the primary modes of spinal motion in the intact condition. Once a ligament was removed, stress increased in the remaining spinal ligaments and changes occurred in vertebral strain energy, but disc pressure remained similar. All major biomechanical changes occurred at the same spinal level as the transected ligament, with minor changes at adjacent levels. This work demonstrates that iatrogenic damage to spinal ligaments disturbs the load sharing within the spinal ligament network and may induce significant clinically relevant changes in the spinal motion segment.     

Increase of nerve growth factor levels in the human herniated intervertebral disc: can annular rupture trigger discogenic back pain?

Introduction

Nerve growth factor (NGF) has an important role in the generation of discogenic pain. We hypothesized that annular rupture is a trigger for discogenic pain through the action of NGF. In this study, the protein levels of NGF in discs from patients with disc herniation were examined and compared with those from discs of patients with other lumbar degenerative disc diseases.

Methods

Patients (n = 55) with lumbar degenerative disc disease treated by surgery were included. Nucleus pulposus tissue (or herniated disc tissue) was surgically removed and homogenized; protein levels were quantified using an enzyme-linked immunosorbent assay (ELISA) for NGF. Levels of NGF in the discs were compared between 1) patients with herniated discs (herniated group) and those with other lumbar degenerative disc diseases (non-herniated group), and 2) low-grade and high-grade degenerated discs. Patient’s symptoms were assessed using a visual analog scale (VAS) and the Oswestry disability index (ODI); the influence of NGF levels on pre- and post-operative symptoms was examined.

Results

Mean levels of NGF in discs of patients were significantly higher in herniated discs (83.4 pg/mg total protein) than those in non-herniated discs (68.4 pg/mg).No significant differences in levels of NGF were found between low-grade and high-grade degenerated discs. Multivariate analysis, adjusted for age and sex, also showed significant correlation between the presence of disc herniation and NGF levels, though no significant correlation was found between disc degeneration and NGF levels. In both herniated and non-herniated groups, pre-operative symptoms were not related to NGF levels. In the herniated group, post-operative lower extremity pain and low back pain (LBP) in motion were greater in patients with low levels of NGF; no significant differences were found in the non-herniated group.

Conclusions

This study reports that NGF increased in herniated discs, and may play an important role in the generation of discogenic pain. Analysis of patient symptoms revealed that pre-operative NGF levels were related to post-operative residual lower extremity pain and LBP in motion. The results suggest that NGF in the disc is related to pain generation, however, the impact of NGF on generation of LBP varies in individual patients.

Electronic supplementary material

The online version of this article (doi:10.1186/ar4674) contains supplementary material, which is available to authorized users.     

Mechanical profiling of intervertebral discs

Despite recent advances in imaging diagnostic technology and additional treatment options our ability to prevent or inhibit discogenic back pain has not drastically improved. The challenge of linking early degenerative patterns to dysfunction and pain remains. Using a novel material testing device designated the tissue diagnostic instrument (TDI) we measured the local stiffness and strain energy absorption in the radial direction of 13 intact intervertebral discs; effectively generating a mechanical profile of each disc. Prior to measuring mechanical properties, an MR image was taken of each spine segment and the discs were radiologically scored according to the Pfirrmann scale. After testing, a sagittal portion of each L1–L2 disc was excised from each of four spines for histology. No significant correlations were found between Pfirrmann grade and mechanical data. However, polarized light microscopy images of disc sections indicated correlations between local tissue modulus measured with the TDI and the clarity and density of lamellar striations.     

Carpal tunnel syndrome,humeral epicondylitis,and the cervical spine: a study of clinical and dimensional relations.

Forty-three patients with idiopathic carpal tunnel syndrome, confirmed by nerve conduction studies and treated by surgery, were compared clinically and radiologically with 43 age- and sex-matched control patients. Patients with carpal tunnel syndrome had a significantly greater prevalence of lateral humeral epicondylitis (tennis elbow) (33%) than controls (7%). Randomised reading of the cervical spine radiographs in ignorance of the groups to which they belonged showed no significant difference in the prevalence of either intervertebral disc degeneration or intraforaminal osteophyte protruion using conventional grading methods. Measurement of the minimum anteroposterior diameter of the cervical spinal canal, the anteroposterior diameters of the cervical vertebral bodies, and the ratio of intervertebral disc height to adjacent vertebral body height in the cervical spine, however, showed a consistent trend to smaller measurements in the carpal tunnel group. Differences were significant at several vertebral levels in each of these dimensions. The narrowing of the intervertebral discs relative to the vertebral bodies in patients with carpal tunnel syndrome may indicate connective tissue changes, which might also occur in the common extensor origin at the elbow or in the contents of the carpal tunnel.     

High pressures and asymmetrical stresses in the scoliotic disc in the absence of muscle loading

Background

Loads acting on scoliotic spines are thought to be asymmetric and involved in progression of the scoliotic deformity; abnormal loading patterns lead to changes in bone and disc cell activity and hence to vertebral body and disc wedging. At present however there are no direct measurements of intradiscal stresses or pressures in scoliotic spines. The aim of this study was to obtain quantitative measurements of the intradiscal stress environment in scoliotic intervertebral discs and to determine if loads acting across the scoliotic spine are asymmetric. We performed in vivo measurements of stresses across the intervertebral disc in patients with scoliosis, both parallel (termed horizontal) and perpendicular (termed vertical) to the end plate, using a side mounted pressure transducer (stress profilometry)

Methods

Stress profilometry was used to measure horizontal and vertical stresses at 5 mm intervals across 25 intervertebral discs of 7 scoliotic patients during anterior reconstructive surgery. A state of hydrostatic pressure was defined by identical horizontal and vertical stresses for at least two consecutive readings. Results were compared with similar stress profiles measured during surgery across 10 discs of 4 spines with no lateral curvature and with data from the literature.

Results

Profiles across scoliotic discs were very different from those of normal, young, healthy discs of equivalent age previously presented in the literature. Hydrostatic pressure regions were only seen in 14/25 discs, extended only over a short distance. Non-scoliotic discs of equivalent age would be expected to show large centrally placed hydrostatic nuclear regions in all discs. Mean pressures were significantly greater (0.25 MPa) than those measured in other anaesthetised patients (<0.07 MPa). A stress peak was seen in the concave annulus in 13/25 discs. Stresses in the concave annulus were greater than in the convex annulus indicating asymmetric loading in these anaesthetised, recumbent patients.

Conclusion

Intradiscal pressures and stresses in scoliotic discs are abnormal, asymmetrical and high in magnitude even in the absence of significant applied muscle loading. The origin of these abnormal stresses is unclear.     

Immunolocalization of type X collagen in human lumbar intervertebral discs during ageing and degeneration

 Type X collagen has so far not been reported to occur in human intervertebral discs. The objective of this study was therefore to investigate the occurrence of type X collagen in human lumbar intervertebral discs during ageing and degeneration. Ninety intervertebral discs with adjacent endplates were excised in toto from individuals (0–86 years) without known spinal disease and were processed for routine decalcified histology. Appropriate slices of each disc were processed for immunohistochemistry using a type-spec ific, monoclonal antibody raised against human type X collagen. Each intervertebral disc was examined for macroscopic and histomorphological features of disc degeneration. Immunohistochemically, a positive specific type X staining was observed in the hypertrophic zone of the growth plate and only in the interstitial matrix of juvenile (<2 years) nucleus pulposus. In adult discs, type X collagen could be localized in conjunction with advanced disc degeneration and first occurred in the disc matrix (i.e., pericellular region) of a 47-year-old specimen. Positive type X staining of the disc matrix was more frequently found in senile (>70 years) discs with end stages of disc degeneration. This study provides the first evidence for the occurrence of type X collagen in human lumbar intervertebral discs and it appears that type X collagen is re-expressed in late stages of disc degeneration. Accepted: 24 April 1997     

Chondroadherin Fragmentation Mediated by the Protease HTRA1 Distinguishes Human Intervertebral Disc Degeneration from Normal Aging

Chondroadherin, a member of the leucine-rich repeat family, has previously been demonstrated to be fragmented in some juveniles with idiopathic scoliosis. This observation led us to investigate adults with disc degeneration. Immunoblotting analysis demonstrated that non-degenerate discs from three different age groups show no chondroadherin fragmentation. Furthermore, the chondroadherin fragments in adult degenerate disc and the juvenile scoliotic disc were compared via immunoblot analysis and appeared to have a similar size. We then investigated whether or not chondroadherin fragmentation increases with the severity of disc degeneration. Three different samples with different severities were chosen from the same disc, and chondroadherin fragmentation was found to be more abundant with increasing severity of degeneration. This observation led us to the creation of a neoepitope antibody to the cleavage site observed. We then observed that the cleavage site in adult degenerate discs and juvenile scoliotic discs was identical as confirmed by the neoepitope antibody. Consequently, investigation of the protease capable of cleaving chondroadherin at this site was necessary. In vitro digests of disc tissue demonstrated that ADAMTS-4 and -5; cathepsins K, B, and L; and MMP-3, -7, -12, and -13 were incapable of cleavage of chondroadherin at this site and that HTRA1 was indeed the only protease capable. Furthermore, increased protein levels of the processed form of HTRA1 were demonstrated in degenerate disc tissues via immunoblotting. The results suggest that chondroadherin fragmentation can be used as a biomarker to distinguish the processes of disc degeneration from normal aging.     

Physiological Loading Can Restore the Proteoglycan Content in a Model of Early IVD Degeneration

A hallmark of early IVD degeneration is a decrease in proteoglycan content. Progression will eventually lead to matrix degradation, a decrease in weight bearing capacity and loss of disc height. In the final stages of IVD degradation, fissures appear in the annular ring allowing extrusion of the NP. It is crucial to understand the interplay between mechanobiology, disc composition and metabolism to be able to provide exercise recommendations to patients with early signs of disc degeneration. This study evaluates the effect of physiological loading compared to no loading on matrix homeostasis in bovine discs with induced degeneration. Bovine discs with trypsin-induced degeneration were cultured for 14 days in a bioreactor under dynamic loading with maintained metabolic activity. Chondroadherin abundance and structure was used to confirm that a functional matrix was preserved in the chosen loading environment. No change was observed in chondroadherin integrity and a non-significant increase in abundance was detected in trypsin-treated loaded discs compared to unloaded discs. The proteoglycan concentration in loaded trypsin-treated discs was significantly higher than in unloaded disc and the newly synthesised proteoglycans were of the same size range as those found in control samples. The proteoglycan showed an even distribution throughout the NP region, similar to that of control discs. Significantly more newly synthesised type II collagen was detected in trypsin-treated loaded discs compared to unloaded discs, demonstrating that physiological load not only stimulates aggrecan production, but also that of type II collagen. Taken together, this study shows that dynamic physiological load has the ability to repair the extracellular matrix depletion typical of early disc degeneration.     

Simulated influence of osteoporosis and disc degeneration on the load transfer in a lumbar functional spinal unit

As life expectancy increases, age-related disorders and the search for related medical care will expand. Osteoporosis is the most frequent skeletal disease in this context with the highest fracture risk existing for vertebrae. The aging process is accompanied by systemic changes, with the earliest degeneration occurring in the intervertebral discs. The influence of various degrees of disc degeneration on the load transfer was examined using the finite element method. The effect of different possible alterations of the bone quality due to osteoporosis was simulated by adjusting the corresponding material properties and their distribution and several loadings were applied. An alteration of the load transfer, characterised by changed compression stiffness and strain distributions as well as magnitudes, due to osteoporotic bone and degenerated discs was found. When osteoporosis was simulated, the stiffness was substantially decreased, larger areas of the cancellous bone were subjected to higher strains and strain maxima were increased. Increasing ratios of transverse isotropy in the osteoporotic bone yielded smaller effects than reduced bone properties. Including a degenerated disc mainly altered the strain distribution. Combining osteoporosis and degenerated discs reduced the areas of cancellous bone subjected to substantial strain. Based on these results, it can be concluded that the definition of a healthy disc in osteoporotic spines might be considered as a worst-case scenario. One attempt to evaluate the progress of osteoporosis can be made by introducing increasing degrees of anisotropy. If several parameters in a model are changed to simulate degeneration, it should be pointed out how each individual definition influences the overall result.     

Measurement of geometric deformation of lumbar intervertebral discs under in-vivo weightbearing condition

Quantitative data of spinal intervertebral disc deformation is instrumental for investigation of spinal disc pathology. In this study, we employed a combined dual fluoroscopic imaging system and the MR imaging technique to determine the lumbar disc deformation in living human subjects. Discs at L2-3, L3-4 and L4-5 levels were investigated in 8 normal subjects. The geometric deformation of the discs under full body weight loading condition (upright standing) was determined using the supine, non-weightbearing condition as a reference. The average maximum tensile deformation was ?21% in compression and 24% in tension, and maximum shear deformation on the disc surface reached 26%. The data indicated that different portions of the disc are under different tensile and shear deformation. Further, discs of L2-3, L3-4 and L4-5 have different deformation behavior under the physiological weightbearing condition. In general, the higher level discs have higher deformation values. The technique used in this study can be used to investigate the deformation behaviors of diseased discs as well as the efficacy of different surgical modalities at restoring normal disc deformation patterns.     

Tenascin in the human intervertebral disc: alterations with aging and disc degeneration

Our objective for this study was to determine the presence and distribution of tenascin in the human intervertebral disc. The tenascins are a family of extracellular matrix proteins with repeated structural domains homologous to epidermal growth factor, fibronectin type III and the fibrinogens. Little is known about the presence of this protein in the disc. Ten normal human discs donated from subjects newborn to 15 years old, 10 control discs from adult donors aged 24-41 years, and 11 surgical disc specimens from patients aged 26-76 years were examined for immunolocalization of tenascin. In young discs, tenascin was localized throughout the annulus; in the nucleus, localization was confined to pericellular matrix. In adult control and degenerating disc specimens, tenascin in the annulus was localized primarily in pericellular matrix regions encircling either single cells or clusters of disc cells; in rare instances localization was more diffuse in the intraterritorial matrix. In young, healthy disc, tenascin was abundant throughout the annulus. In contrast, degenerating discs in adults showed a localization restricted to the pericellular, and rarely, more restricted intraterritorial matrix. These observations indicate that changes in the amount and distribution of tenascin may have a role in disc aging and degeneration, possibly by modulating fibronectin-disc-cell interactions, and causing alterations in the shape of disc cells.