Mapping of ben genes of Pseudomonas aeruginosa

Abstract Four ben genes responsible for the conversion of benzoate to catechol in Pseudomonas aeruginosa PAO have been mapped to a 4.6 kb Kpn I fragment. ben -1 and ben -4 were known to be separate genes but now ben-1508 has been found to be different from ben-2 . The two genes were distinguished by Tn 5 mutagenesis of a cosmid clone and deletion mapping. It is likely that the four genes mapped ( ben-4, ben-2, ben-1508 and ben-1 ) correspond to the previously characterized benR (regulatory gene) and benABC (benzoate dioxygenase) respectively.     

Construction and characterization of Pseudomonas aeruginosa algB mutants: role of algB in high-level production of alginate.

The algB gene, which is involved in the production of alginate in Pseudomonas aeruginosa, was localized to approximately 2.2 kilobases of DNA from strain FRD by using transposon Tn501 insertion mutagenesis, subcloning, and complementation techniques. The previously reported alg-50(Ts) mutation, which confers the phenotype of temperature-sensitive alginate production, was here designated as an algB allele. A transduction-mediated gene replacement technique was used for site-directed mutagenesis to isolate and characterize algB::Tn501 mutants of P. aeruginosa FRD. Although algB::Tn501 mutants had a nonmucoid phenotype (indicating an alginate deficiency), they still produced about 1 to 5% of wild-type levels of alginate in most growth media and up to 16% in very rich media. The algB::Tn501 mutations had no apparent effect on growth rate or growth requirements. Using another gene replacement technique called excision marker rescue, we constructed a chromosomal algB deletion (delta algB) mutant of P. aeruginosa FRD. The delta algB mutant also produced low levels of alginate as did the algB::Tn501 mutants. The alginate produced by algB::Tn501 mutants resembled wild-type alginate by all criteria studied: molecular weight, acetylation, and proportion of mannuronic and guluronic acids. Thus, the algB gene product is apparently involved in the high-level production of alginate by P. aeruginosa and is not directly involved in the pathway leading to its biosynthesis. Chromosomal mapping of an algB::Tn501 insertion showed linkage to the trp-2 marker on the FRD chromosome as does the algB50(Ts) mutation. The excision marker rescue technique was also used to place the algB::Tn501 marker on the chromosome of characterized strains of P. aeruginosa PAO. The algB::Tn501 mutation mapped near 21 min on the PAO chromosome.     

Gene cloning and expression of the Pseudomonas aeruginosa periplasmic phosphate-binding protein

Abstract The pstS gene, encoding the Pseudomonas aeruginosa phosphate-binding protein, was cloned onto a cosmid vector into Escherichia coli , and localized by subcloning, mapping the insertion site of Tn 501 in a P. aeruginosa pstS ::Tn 501 mutant, and hybridization to an oligonucleotide pool synthesized according to the aminoterminal amino acid sequence of the purified protein. The cloned pstS gene was transferred to P. aeruginosa pstS mutants. The P. aeruoginosa phosphate-binding protein was also expressed and secreted into the periplasm of E. coli pstS mutants.     

Physical and genetic mapping of the catA region of Pseudomonas aeruginosa.

A prime plasmid has been used as the basis for the construction of a physical and genetic map of a 125 kb segment of the Pseudomonas aeruginosa PAO chromosome. Using pMO1811, a prime plasmid selected for the catA region, a series of Tn5 insertions were obtained which identified two new markers gcu (glycine utilization) and oap (organic acids and alcohols permeability) in the 125 kb region and located them in relation to other known markers of this region. A cosmid bank was constructed from the prime plasmid and an ordered array of cosmid clones for this region identified by restriction endonuclease mapping with EcoRI, HindIII and KpnI, as well as complementation mapping and chromosome walking. By Southern hybridization analyses, it was confirmed that the chromosomal insert carried by pMO1811 was flanked by single, tandemly arranged copies of IS21 and the orientation of the insert on this prime was determined. This cosmid bank provides a resource for the further analysis of this region of the P. aeruginosa genome.     

Integration of R91-5::Tn501 into the Pseudomonas putida PPN chromosome and genetic circularity of the chromosomal map

Derivatives of the Pseudomonas aeruginosa plasmid R91-5, loaded with the transposon Tn501, were transferred to P. putida PPN. Over 90% of exconjugants, which arose at a frequency of ca. 10(-6) per donor cell, exhibited high-frequency (greater than 10(-2) per donor cell) polarized transfer of chromosomal markers. In one instance it was demonstrated by transduction that the plasmid had been inserted into a gene required for serine biosynthesis. The integrated nature of the plasmid in this and other P. putida (R91-5::Tn501) derivatives was supported by the failure to detect covalently closed circular DNA in these strains. The transfer origins of six different Hfr donors have been characterized genetically, and time-of-entry kinetics obtained from interrupted matings have enabled the construction of a circular genetic map 103 min in length and containing 35 markers. The genetic map of P. putida PPN shows significant differences in marker order to that of P. aeruginosa PAO.     

Alginate synthesis in Pseudomonas aeruginosa: the role of AlgL (alginate lyase) and AlgX.

Previous studies localized an alginate lyase gene (algL) within the alginate biosynthetic gene cluster at 34 min on the Pseudomonas aeruginosa chromosome. Insertion of a Tn501 polar transposon in a gene (algX) directly upstream of algL in mucoid P. aeruginosa FRD1 inactivated expression of algX, algL, and other downstream genes, including algA. This strain is phenotypically nonmucoid; however, alginate production could be restored by complementation in trans with a plasmid carrying all of the genes inactivated by the insertion, including algL and algX. Alginate production was also recovered when a merodiploid that generated a complete alginate gene cluster on the chromosome was constructed. However, alginate production by merodiploids formed in the algX::Tn501 mutant using an alginate cluster with an algL deletion was not restored to wild-type levels unless algL was provided on a plasmid in trans. In addition, complementation studies of Tn501 mutants using plasmids containing specific deletions in either algL or algX revealed that both genes were required to restore the mucoid phenotype. Escherichia coli strains which expressed algX produced a unique protein of approximately 53 kDa, consistent with the gene product predicted from the DNA sequencing data. These studies demonstrate that AlgX, whose biochemical function remains to be defined, and AlgL, which has alginate lyase activity, are both involved in alginate production by P. aeruginosa.     

Isolation and characterization of Pseudomonas aeruginosa R'' plasmids constructed by interspecific mating

Plasmid R68.45 was used to construct R' plasmids carrying a maximum of 4 to 5 map minutes of the Pseudomonas aeruginosa PAO chromosome by interspecific mating, using P. putida PPN as the recipient. These R' plasmids were used to determine the map location of the amiE locus and to identify tentatively a number of P. putida auxotrophic mutations. Some of these R' plasmids could not be maintained in recombination-deficient P. aeruginosa strains.     

Insertion element analysis and mapping of the Pseudomonas plasmid alk regulon.

We characterized and mapped new mutations of the alk (alkane utilization) genes found on Pseudomonas plasmids of the Inc P-2 group. These mutations were isolated after (i) nitrosoguanidine mutagenesis, (ii) transposition of the Tn7 trimethoprim and streptomycin resistance determinant, and (iii) reversion of polarity effects of alk::Tn7 insertion mutations. Our results indicate the existence of two alk loci not previously described--alkD, whose product is required for synthesis of membrane alkane-oxidizing activities, and alkE, whose product is required for synthesis of inducible membrane alcohol dehydrogenase activity. Polarity of alk::Tn7 insertion mutations indicates the existence of an alkBAE operon. Mapping of alk loci by transduction in P. aeruginosa shows that there are at least three alk clusters in the CAM-OCT plasmid--alkRD, containing regulatory genes; alkBAE, containing genes for specific biochemical activities; and alkC, containing one or more genes needed for normal synthesis of membrane alcohol dehydrogenase. The alkRD and alkBAE clusters are linked but separated by about 42 kilobases. The alkC cluster is not linked to either of the other two alk regions. Altogether, these results indicate a complex genetic control of the alkane utilization phenotype in P. putida and P. aeruginosa involving at least six separate genes.     

Genetic analysis of the aggA locus involved in agglutination and adherence of Pseudomonas putida, a beneficial fluorescent pseudomonad.

An isolate of Pseudomonas putida, which rapidly adheres to plant roots, is agglutinated by a glycoprotein from root surfaces. Agglutination is prevented and adherence to the root surface is diminished by Tn5 insertion in mutant 5123. Two cosmid clones from wild type P. putida and a 2.7-kbp EcoRI-HindIII subclone present in both cosmid clones restored agglutinable to wild type levels in transconjugants of the nonagglutinable (Agg-) Tn5 mutant 5123. These three clones increased agglutinability in transconjugants of the parental Agg+ isolate. The 2.7-kbp EcoRI-HindIII subclone restored adherence to bean root surfaces of 5123 to wild type levels in a short-term binding assay. Deletion analysis of the 2.7-kbp fragment indicated only 1.45 kbp was necessary for complementation of agglutinability in 5123. This sequence, termed the aggA locus, contains an open reading frame of 1,356 nucleotides encoding a predicted 50,509-Da protein. The distribution of the aggA locus in plant-associated bacteria, as detected through Southern hybridization, is limited to bacteria that express the agglutination phenotype.     

Cloning and transposon vectors derived from satellite bacteriophage P4 for genetic manipulation of Pseudomonas and other gram-negative bacteria.

We developed transposon and cloning shuttle vectors for genetic manipulation of Pseudomonas and other gram-negative bacteria, exploiting the unique properties and the broad host range of the satellite bacteriophage P4. P4::Tn5 AP-1 and P4::Tn5 AP-2 are suicide transposon vectors which have been used for efficient Tn5 mutagenesis in Pseudomonas putida. pKGB2 is a phasmid vector with a cloning capacity of about 7.5 kb; useful unique cloning sites are SacI and SacII in the streptomycin resistance determinant and PvuI and XhoI in the kanamycin resistance determinant. pKGB4 is a cosmid derived from pKGB2 and carries the additional cloning site SmaI in the kanamycin resistance determinant; its cloning capacity is about 18 kb. These vectors and their recombined derivatives were transferred from Escherichia coli to P. putida by transduction and may be used for other bacterial species susceptible to P4 infection.     

Cloning and expression of the catA and catBC gene clusters from Pseudomonas aeruginosa PAO.

A 9.9-kilobase (kb) BamHI restriction endonuclease fragment encoding the catA and catBC gene clusters was selected from a gene bank of the Pseudomonas aeruginosa PAO1c chromosome. The catA, catB, and catC genes encode enzymes that catalyze consecutive reactions in the catechol branch of the beta-ketoadipate pathway: catA, catechol-1,2-dioxygenase (EC 1.13.11.1); catB, muconate lactonizing enzyme (EC 5.5.1.1); and catC, muconolactone isomerase (EC 5.3.3.4). A recombinant plasmid, pRO1783, which contains the 9.9-kb BamHI restriction fragment complemented P. aeruginosa mutants with lesions in the catA, catB, or catC gene; however, this fragment of chromosomal DNA did not contain any other catabolic genes which had been placed near the catA or catBC cluster based on cotransducibility of the loci. Restriction mapping, deletion subcloning, and complementation analysis showed that the order of the genes on the cloned chromosomal DNA fragment is catA, catB, catC. The catBC genes are tightly linked and are transcribed from a single promoter that is on the 5' side of the catB gene. The catA gene is approximately 3 kb from the catBC genes. The cloned P. aeruginosa catA, catB, and catC genes were expressed at basal levels in blocked mutants of Pseudomonas putida and did not exhibit an inducible response. These observations suggest positive regulation of the P. aeruginosa catA and catBC cluster, the absence of a positive regulatory element from pRO1783, and the inability of the P. putida regulatory gene product to induce expression of the P. aeruginosa catA, catB, and catC genes.     

Construction and characterization of Pseudomonas aeruginosa protein F-deficient mutants after in vitro and in vivo insertion mutagenesis of the cloned gene.

Mutants with insertion mutations in the Pseudomonas aeruginosa protein F (oprF) gene were created in vivo by Tn1 mutagenesis of the cloned gene in Escherichia coli and in vitro by insertion of the streptomycin resistance-encoding omega fragment into the cloned gene, followed by transfer of the mutated protein F gene back to P. aeruginosa. Homologous recombination into the P. aeruginosa chromosome was driven by a bacteriophage F116L transduction method in the oprF::Tn1 mutants or Tn5-instability in the oprF::omega mutants. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis and Western immunoblotting demonstrated that the resultant oprF insertion mutants had lost protein F, whereas restriction digestion and Southern blotting experiments proved that the mutants contained a single chromosomal oprF gene with either Tn1 or omega inserted into it. It has been proposed that protein F has a role in antibiotic uptake in P. aeruginosa. Measurement of antibiotic resistance levels showed small to marginal increases in resistance, compared with that of the parent P. aeruginosa strain, to a variety of beta-lactam antibiotics. Protein F-deficient mutants had altered barrier properties as revealed by a three- to fivefold increase in the uptake of the hydrophobic fluorescent probe 1-N-phenylnaphthylamine.     

Cloning of xcp genes located at the 55 min region of the chromosome and involved in protein secretion in Pseudomonas aeruginosa

Pleiotropic mutations (xcp) affecting secretion of proteins in Pseudomonas aeruginosa have been previously characterized and mapped at 0 min, 55 min and 65 min. Genomic libraries of this organism have been constructed and the genes xcp-5 and xcp-54, located at the 55 min region, were cloned using the adjacent met allele as a marker, and complementation of xcp strains. From our linkage and cloning analysis, the most probable gene order in this region appears to be pyrD... xcp-5/xcp-54/met-9011/oru-314/trpF/leu-10. Restriction mapping and transposon (Tn1725) insertion mutagenesis demonstrated that: (i) the overall size of DNA necessary for xcp expression was 9kb, (ii) the two loci are not adjacent on the chromosome, and (iii) the two loci are expressed independently. The xcp-5 gene has been subcloned on a 4kb EcoRI fragment.     

Transposon mutagenesis of Pseudomonas aeruginosa exoprotease genes.

Transposon Tn5 was used to generate protease-deficient insertion mutants of Pseudomonas aeruginosa. The presence of Tn5 in the chromosome of P. aeruginosa was demonstrated by transduction and DNA-DNA hybridization. The altered protease production and kanamycin resistance were cotransduced into a wild-type P. aeruginosa strain. A radiolabeled probe of Tn5 DNA hybridized to specific BamHI fragments isolated from the insertion mutants. Two independently isolated Tn5 insertion mutants had reduced protease production, partially impaired elastase activity, and no immunologically reactive alkaline protease.     

The CAM-OCT plasmid enhances UV responses of Pseudomonas aeruginosa recA mutants.

The effect of the CAM-OCT plasmid on responses to UV irradiation of Pseudomonas aeruginosa recA mutants was characterized. Mutant alleles examined included rec-1, rec-2, and recA7::Tn501. The plasmid substantially enhanced both survival and mutagenesis of RecA- cells after treatment with UV light. Survival of the RecA-(CAM-OCT) cells after UV irradiation was intermediate between that seen in the wild-type P. aeruginosa PAO1 and the increased survival seen in PAO1(CAM-OCT) cells. Mutability was quantitated by the reversion to carbenicillin resistance of strains carrying a bla(Am) mutation on a derivative of plasmid RP1. UV-induced mutagenesis of CAM-OCT carrying recA mutants occurred at levels comparable to that seen in PAO1(CAM-OCT). The ability of CAM-OCT plasmid to suppress the recombination deficiency in recA mutants was tested by assaying for bacteriophage F116L-generalized transduction of a Tn7 insertion in the alkane utilization genes of CAM-OCT. Transduction of the Tn7 insertion was not detected in RecA-(CAM-OCT) strains but was easily seen in PAO1(CAM-OCT), indicating that the plasmid does not encode a recA analog. The results indicate that the CAM-OCT UV response genes are expressed in RecA- cells, which differs from results seen with other UV response-enhancing plasmids. The results suggest that CAM-OCT either encodes several UV responses genes itself or induces chromosomal UV response genes by an alternate mechanism.     

Transposon insertion mutagenesis of Pseudomonas aeruginosa with a Tn5 derivative: application to physical mapping of the arc gene cluster

For insertional mutagenesis of Pseudomonas aeruginosa, a derivative of the kanamycin-resistance (KmR) transposon Tn5 was constructed (Tn5-751) that carried the trimethoprim-resistance (TpR) determinant from plasmid R751 as an additional marker. Double selection for KmR and TpR avoided the isolation of spontaneous aminoglycoside-resistant mutants which occur at high frequencies in P. aeruginosa. As a delivery system for the recombinant transposon, plasmid pME305, a derivative of the broad-host-range plasma RP1, proved effective; pME305 is temperature-sensitive at 43 degrees C for maintenance in Escherichia coli and P. aeruginosa and deleted for IS21 and the KmR and primase genes. In matings with an E. coli donor carrying pME9(= pME305::Tn5-751), transposon insertion mutants of P. aeruginosa PAO were recovered at approx. 5 X 10(-7)/donor at 43 degrees C. Among Tn5-751 insertional mutants 0.9% were auxotrophs. A thr::Tn5-751 mutation near the recA-like locus rec-102 is useful for the construction of recombination-deficient strains. Several arc::Tn5-751 mutants could be isolated that were defective in anaerobic utilization of arginine as an energy source. From three of these mutants the arc gene region was cloned into an E. coli vector plasmid. Since Tn5-751 has a single EcoRI site between the TpR and KmR genes, EcoRI-generated fragments carrying either resistance determinant plus adjacent chromosomal DNA could be selected separately in E. coli. Thus, a restriction map of the arc region was constructed and verified by hybridization experiments. The arc genes were tightly clustered, confirming earlier genetic evidence.     

Cloning of the Rhodobacter capsulatus hemA gene.

Portions of the Rhodobacter capsulatus hemA gene have been cloned from a hemA::Tn5 insertion strain into the lambda bacteriophage derivative EMBL3. A cosmid containing the wild-type R. capsulatus hemA gene was isolated by complementation of the hemA::Tn5 mutant. The cosmid contains a 1.4-kilobase EcoRI fragment that spans the hemA::Tn5 insertion site. The entire hemA gene is contained in this fragment and the adjacent 0.6-kilobase EcoRI fragment.     

Method for gene replacement in Pseudomonas aeruginosa used in construction of recA mutants: recA-independent instability of alginate production.

The availability of a technique for site-directed mutagenesis by gene replacement provides a powerful tool for genetic analysis in any bacterial species. We report here a general technique for gene replacement in Pseudomonas aeruginosa. Genes on fragments of cloned P. aeruginosa DNA, altered by transposon mutagenesis, can be transduced into a recipient strain and can replace homologous genes in the P. aeruginosa genome. In this study we applied this technique to the construction of recA mutants of P. aeruginosa. A cloned segment of P. aeruginosa FRD1 DNA was isolated which encoded a protein analogous to the recA gene product of Escherichia coli. The P. aeruginosa recA gene was able to complement several defects associated with recA mutation in E. coli. Transposon Tn1 and Tn501 insertions in the cloned recA gene of P. aeruginosa were used to generate chromosomal recA mutants by gene replacement. These recA strains of P. aeruginosa were more sensitive to UV irradiation and methyl methane sulfonate and showed reduced recombination proficiency compared with the wild type. Also examined was the effect of recA mutations on the expression of alginate, a virulence trait. Alginate is a capsulelike polysaccharide associated with certain pulmonary infections, and its expression is typically unstable. The genetic mechanism responsible for the instability of alginate biosynthesis was shown to be recA independent.     

Key genes involved in heavy-metal resistance in Pseudomonas putida CD2

A cadmium-resistant bacterium Pseudomonas putida CD2 was isolated from sewage sludge samples. Strain CD2 exhibited high maximal tolerant concentrations (MTC) for a large spectrum of divalent metals. Screening a library obtained using Tn5-B21 insertion mutagenesis resulted in identification of 12 mutants with a substantial decrease in resistance to 3 mM cadmium. The DNA sequences of the contiguous region from the Tn5 insertion sites were determined by inverse PCR. Six genes involved in cadmium resistance were identified. These genes were from three gene clusters: czcCBA1, cadA2R and colRS. The homologs of the first two gene clusters were predicted to be metal efflux systems, whereas the products of colRS, ColR and ColS, were thought to be a two-component signal transduction (TCST) system. In this study, we have demonstrated that ColRS also function in regulating multi-metal resistance using genetic complementation.