Identification, cloning, and characterization of the Escherichia coli sohA gene, a suppressor of the htrA (degP) null phenotype.

Two extragenic suppressors which allow temperature-sensitive htrA mutant Escherichia coli bacteria to grow at 42 degrees C and simultaneously acquire a cold-sensitive phenotype at 30 degrees C were isolated. The cold-sensitive phenotype exhibited by one of the mutants was used to clone the corresponding wild-type copy of the suppressor gene. This was done through complementation with a mini-mu plasmid E. coli DNA library, by selection for colonies which were no longer cold sensitive, at 30 degrees C. The cloned suppressor gene was shown to complement the cold-sensitive phenotype of both suppressor mutations. It was mapped to 68 min on the E. coli chromosome through hybridization to the Kohara library of overlapping lambda transducing bacteriophages, which covers the entire E. coli chromosome. The complementing gene was further subcloned on an 830-base-pair (bp) DNA fragment. DNA sequencing revealed the presence of an open reading frame (ORF) of 333 bp which could encode a protein of 12,359 Mr. Subcloning of various DNA fragments from within this 830-bp DNA fragment suggests that this ORF is most likely responsible for suppression of the cold-sensitive phenotype of the htrA suppressor bacteria. By using a T7 polymerase system to overproduce plasmid-encoded proteins, a protein of approximately 12,000 Mr was produced by this cloned DNA fragment. This ORF defines a previously undiscovered gene in E. coli, called sohA (suppressor of htrA).     

Isolation of Lactococcus lactis nonsense suppressors and construction of a food-grade cloning vector

Nonsense suppressor strains of Lactococcus lactis were isolated using plasmids containing nonsense mutations or as revertants of a nonsense auxotrophic mutant. The nonsense suppressor gene was cloned from two suppressor strains and the DNA sequence determined. One suppressor is an ochre suppressor with an altered tRNA_gin and the other an amber suppressor with an altered tRNA_ser. The nonsense suppressors allowed isolation of nonsense mutants of a lytic bacteriophage and suppressible auxotrophic mutants of L. lactis MG1363. A food-grade cloning vector based totally on DNA from Lactococcus and a synthetic polylinker with 11 unique restriction sites was constructed using the ochre suppressor as a selectable marker. Selection, following etectroporation of a suppressible purine auxotroph, can be done on purine-free medium. The pepN gene from L. lactis Wg2 was subcloned resulting in a food-grade plasmid giving a four- to fivefold increase in lysine aminopeptidase activity.     

Cloning and expression in Escherichia coli of the TL-DNA gene 4 of Agrobacterium tumefaciens under the control of the PR promoter of bacteriophage lambda

A plasmid was constructed that directs expression of the TL-DNA gene 4 protein in E. coli. The different steps of the construction were as follows: i) a region of gene 4 encoding the amino-terminal portion of the protein was fused in frame to DNA encoding an enzymatically active carboxy-terminal fragment of beta-galactosidase. The hybrid gene was poorly expressed from the upstream lambda PL promoter carried by the vector. ii) in order to generate an efficient procaryotic ribosome binding site, a DNA fragment carrying the lambda PR promoter with the nearby Shine-Dalgarno (SD) sequence of gene cro was placed in front of the gene 4-lacZ fusion. A recombinant plasmid, termed pGV793, that expressed efficiently a fused protein 4-beta-galactosidase was identified among the Lac+ clones. DNA sequencing analysis showed that pGV793 carried a hybrid ribosome binding site composed of the cro SD sequence, a five bp sequence and the ATG codon of gene 4. Plasmid pGV793 directed the synthesis of three polypeptides of molecular weight 132 Kd, 126 Kd and 122 Kd that carried beta-galactosidase antigenic determinants. The largest polypeptide had the expected size for the hybrid protein. The fusion proteins which accounted for about 0.5% of the total cellular proteins were purified by immunoadsorption using anti-beta-galactosidase antiserum. iii) the complete gene 4 coding sequence was reconstituted, with the lambda PR promoter in place. The resulting pGV822 plasmid expressed a polypeptide whose molecular weight 27 Kd corresponded to the expected size for the gene 4 product. The pI was about 7.     

Construction of a hybrid col E1 plasmid carrying the gene for bacteriophage lambda repressor.

A biologically active hybrid DNA molecule was constructed from plasmid Col E1 and the Eco R1 fragment of lambda DNA containing the gene for lambda repressor. The presence of this gene in the hybrid molecule was demonstrated genetically. The hybrid plasmid contains two closely located targets for restriction endonuclease Hind 111 in the integrated fragment. Thus, the plasmid may be used as a vector not only for Eco R1 fragments but also for Hind 111 fragments.     

Identification in vivo of promoter activity in the left site of the att region of bacteriophage lambda DNA

The promoter-probing vector (pSK plasmid) was explored for cloning of the fragments from lambda cI857 and lambda b2 DNAs containing different regions of the att site. We have constructed all-tet fusions where the fusions are: 1) HindIII/BamHI-491 base pairs (b. p.) fragment of lambda cI857 DNA containing POP' site (plasmid pSK-PP'); 2) AluI-242 b. p. fragment of lambda cI857 DNA containing the left arm of the POP' site (plasmid pSK-P); 3) AluI-242 b. p. fragment of lambda cI857 DNA with opposite orientation (plasmid pSK-P); 4) EcoRI/BamHI-750 b. p. fragment of lambda b2 DNA containing the right arm of the POP' site (plasmid pSK-P'). These fusions permit us to analyse the effect of various pieces of the attachment site on the expression tet gene as the result of reparation of this gene promoter. We find that expression of tet (tetracycline resistant phenotype) takes place in the pSK-PP' and pSK-P but not in the pSK-P' and pSK-P. These facts permit us to conclude that the left arm of the att site contains a rightward promoter functioning in vivo. We postulate that this promoter activity might correspond to the promoter patt, which was described in previous experiments in vitro.     

Construction and expression of nonsense suppressor tRNAs which function in plant cells

An Arabidopsis thaliana L. DNA containing the tRNA(TrpUGG) gene was isolated and altered to encode the amber suppressor tRNA(TrpUAG) or the ochre suppressor tRNA(TrpUAA). These DNAs were electroporated into carrot protoplasts and tRNA expression was demonstrated by the translational suppression of amber and ochre nonsense mutations in the chloramphenicol acetyltransferase (CAT) reporter gene. DNAs encoding tRNA(TrpUAG) and tRNA(TrpUAA) nonsense suppressor tRNAs caused suppression of their cognate nonsense codons in CAT mRNAs, with the tRNA(TrpUAG) gene exhibiting the greater suppression under optimal conditions for expression of CAT. The development of these translational suppressors which function in plant cells facilitates the study of plant tRNA gene expression and will make possible the manipulation of plant protein structure and function.     

pMB9 plasmids bearing the Salmonella typhimurium his operon and gnd gene

A plasmid containing the entire Salmonella typhimurium his operon was constructed from plasmid pM89 and an EcoRI fragment of phi 80 his imm lambda DNA. The recombinant pST41 also includes the glucose 6-phosphate dehydrogenase (gnd) gene and has one EcoRI endonuclease cleavage site in the integrated fragment. This plasmid served as a source for the construction of two additional plasmids, one carrying the OGDC-region of the his operon and the other a CBHAFIE segment of the his gene along with the gnd gene. The presence of the his operon in the constructed plasmids was confirmed by hybridization to S. typhimurium his RNA. The location of the gnd gene in the CBHAFIE fragment of the his gene was confirmed genetically: after transfection with the plasmid bearing the gnd gene, a gnd recipient gained the capacity to utilize gluconate as a sole carbon source. The DNAs of the three hybrid plasmids were analyzed by gel electrophoresis. By comparing the EcoRI endonuclease cleavage pattern of these three hybrid plasmids with the DNA cleavage pattern of phi 80 his imm lambda, phi 80 imm lambda and lambda phages, the EcoRI cleavage map of phi 80 his imm lambda was obtained.     

Organization of the early region of bacteriophage phi 80. Genes and proteins

An EcoRI segment containing the early region of bacteriophage phi 80 DNA that controls immunity and lytic growth was identified as a segment whose presence on a plasmid prevented growth of infecting phi 80cI phage. The nucleotide sequence of the segment (EcoRI-F) and adjacent regions was determined. Based on the positions of amber mutations and the sizes of some gene products, the reading frames for five genes were identified. From the relative locations of these genes in the genome, the properties of some isolated gene products, and the analysis of the structures of predicted proteins, the following phi 80 to lambda analogies are deduced: genes cI and cII to their lambda namesakes; gene 30 to cro; gene 15 to O; and gene 14 to P. An amber mutation by which gene 16 was defined is a nonsense mutation in the frame for gene 15 protein, excluding the presence of gene 16. An amber mutation in gene 14 or 15 inhibits phage DNA synthesis, as is the case with their lambda analogues, gene O or P. Some characteristics of proteins from the early region predicted from their primary structures and their possible functions are discussed.     

A rabbit Ig lambda L chain C region gene encoding C21 allotopes

Southern blot analyses of germ-line DNA obtained from rabbits expressing lambda chains of C7 and/or C21 allotypes were performed with a rabbit C lambda region-specific probe; a 12-kbp EcoRI- and a 2-kbp BamHI-hybridizing fragment were detected only in the DNA from rabbits expressing the C21 allotype. The 12-kbp EcoRI fragment was cloned and shown to contain two C lambda region-encoding genes in the same orientation. Each is preceded by a J lambda gene segment. Nonamer-12-bp spacer-heptamer recombination signal sequences were found 5' of each J lambda segment, and splicing signals were identified at the 3' ends of the J lambda segments and the 5' ends of the corresponding C lambda genes. The C lambda 5 gene, which exhibits a sequence identical with that found in several cDNA clones, is carried by the 2-kbp BamHI fragment missing from the genomic DNA of rabbits which do not express the C21 allotype. The second C lambda gene, C lambda 6, lies 3' of C lambda 5, in a 1.6-kbp BamHI fragment which is present in genomic DNAs of all tested rabbits, irrespective of their phenotype. Its sequence is identical with that found in one cDNA clone and differs from that of C lambda 5 in 17 base positions resulting in four amino acid substitutions. A fragment of a cDNA, with a J-C region sequence identical with that encoded by the J lambda 5-C lambda 5 gene pair, was subcloned into a plasmid expression vector. The resulting polypeptide product could be specifically immunoprecipitated by anti-C21 but not anti-C7 alloantisera, showing that some, if not all, C21 allotopes are encoded by the C lambda 5 gene. In contrast, the C lambda 6 gene product was not precipitable, either by anti-C7 or by anti-C21 alloantisera, although it was readily immunoprecipitated by a goat anti-rabbit lambda chain antiserum.     

Isolation of dominant negative mutants and inhibitory antisense RNA sequences by expression selection of random DNA fragments.

Selective inhibition of specific genes can be accomplished using genetic suppressor elements (GSEs) that encode antisense RNA, dominant negative mutant proteins, or other regulatory products. GSEs may correspond to partial sequences of target genes, usually identified by trial and error. We have used bacteriophage lambda as a model system to test a concept that biologically active GSEs may be generated by random DNA fragmentation and identified by expression selection. Fragments from eleven different regions of lambda genome, encoding specific peptides or antisense RNA sequences, rendered E. coli resistant to the phage. Analysis of these GSEs revealed some previously unknown functions of phage lambda, including suppression of the cellular lambda receptor by an 'accessory' gene of the phage. The random fragment selection strategy provides a general approach to the generation of efficient GSEs and elucidation of novel gene functions.     

Structural studies of lambda transducing bacteriophage carrying bacterial deoxyribonucleic acid from the metBJLF region of the Escherichia coli chromosome.

The structures of several lambda dmet and related lambda darg transducing phage were studied by restriction fragment mapping and electron microscopic measurements of homoduplexes and heteroduplexes. A new transducing phage (lambda dmet141), in which metF is the only functional gene of the cluster, was isolated. In contrast, lambda dmet117, which expresses the entire metBJLF cluster, has only 3 kilobases more bacterial deoxyribonucleic acid (DNA) than lambda dmet141. An EcoRI restriction fragment of lambda dmet117, which carries the leftmost 6 kilobases of the bacterial DNA insert, was isolated and shown to contain a functional copy of metB. Small structural differences at the attachment sites of some of the phage were shown to result from different sites of lambda integration in the two parent insertion lysogens.     

Identification of the gene for DNA helicase II of Escherichia coli

Using a modification of the solid-phase radioimmune assay of Broome and Gilbert [Proc. Natl Acad. Sci. USA, 75, 2746 (1978)] to screen the plaques of lambda recombinant phages for the presence of an elevated level of helicase-II-specific antigen, we have identified the gene for helicase II in a library of Escherichia coli DNA. The DNA selected was subcloned from lambda into plasmid vectors; restriction analysis located the DNA region encoding helicase II in a PvuII fragment identical in size (2900 base pairs) and restriction pattern to that which contains the uvrD gene. Plasmids carrying this DNA fragment complemented the increased sensitivity to ultraviolet irradiation and the mutator phenotype of uvrD mutants. Furthermore, uvrD502 mutant cells were found to liberate no helicase II activity upon extraction. Following transformation with the cloned DNA, active helicase II was recovered from the mutant cells. These results support the view that helicase II is encoded by uvrD.     

Escherichia coli supH suppressor: temperature-sensitive missense suppression caused by an anticodon change in tRNASer2.

We describe the cloning and the DNA sequence of the Escherichia coli supH missense suppressor and of the supD60(Am) suppressor genes. supH is a mutant form of serU which codes for tRNASer2. The supH coding sequence differs from the wild-type sequence by a single nucleotide change which corresponds to the middle position of the anticodon. The CGA anticodon of wild-type tRNA and CUA anticodon of supD tRNA is changed to CAA in supH tRNA, which is expected to recognize the UUG leucine codon. We propose that the supH suppressor causes the insertion of serine in response to this codon. The temperature sensitivity caused by supH may be due to a conformation of the CAA anticodon in the supH tRNASer that is slightly different than that in the corresponding tRNALeu species.     

Detection of nonsense and frameshift mutations in <Emphasis Type="Italic">BRCA1</Emphasis> gene using a new plasmid vector pPhoA-frame

The technique for detecting frameshift and nonsense mutations in the human BRCA1 gene has been suggested. The technique presumes the construction of recombinant plasmids where the tested DNA fragment is placed in frame with alkaline phosphatase gene of Escherichia coli (phoA). A special plasmid pPhoA-frame was constructed for this analysis, and the plasmid contained the DNA fragment that encodes alkaline phosphatase of E. coli. The synthetic DNA fragment with BglII, StuI, ApaI and SacII sites was inserted into the DNA fragment that encodes alkaline phosphatase of E. coli between Ala218 and Gly219 codons to facilitate the cloning of BRCA1 gene fragments. The occurrence of the frameshift or nonsense mutation in the tested DNA fragment can be detected after the transformation of E. coli by the recombinant plasmid that contains the tested fragment. E. coli colonies with newly constructed recombinant plasmids are plated out on the indicator agar. In the case of the frameshift or nonsense mutation, the colonies are not colored, and DNA fragments without these mutations result in the formation of blue colonies.