The protein glass transition as measured by dielectric spectroscopy and differential scanning calorimetry

The glass transition and its related dynamics of myoglobin in water and in a water–glycerol mixture have been investigated by dielectric spectroscopy and differential scanning calorimetry (DSC). For all samples, the DSC measurements display a glass transition that extends over a large temperature range. Both the temperature of the transition and its broadness decrease rapidly with increasing amount of solvent in the system. The dielectric measurements show several dynamical processes, due to both protein and solvent relaxations, and in the case of pure water as solvent the main protein process (which most likely is due to conformational changes of the protein structure) exhibits a dynamic glass transition (i.e. reaches a relaxation time of 100 s) at about the same temperature as the calorimetric glass transition temperature T_g is found. This glass transition is most likely caused by the dynamic crossover and the associated vanishing of the α-relaxation of the main water relaxation, although it does not contribute to the calorimetric T_g. This is in contrast to myoglobin in water–glycerol, where the main solvent relaxation makes the strongest contribution to the calorimetric glass transition. For all samples it is clear that several proteins processes are involved in the calorimetric glass transition and the broadness of the transition depends on how much these different relaxations are separated in time.     

Small angle X-ray scattering (SAXS) and differential scanning calorimetry (DSC) studies of amide phospholipids

Varying chemically the structure of phospholipids in the region between hydrophobic and hydrophilic segments is expected to have a strong influence on the interaction with water and the phase behavior. This is studied in this work with the motivation to investigate these lipids as potential inhibitors of phospholipase A2. Thus the amide phospholipids L-ether-amide-PC (1-O-hexadecyl-2-N-palmitoyl-2-amino-2-deoxy-sn-glycero-3-phosphocholine), L-ester-amide-PC (1-palmitoyl-2-N-palmitoyl-2-amino-2-deoxy-sn-glycero-3-phosphocholine) and L-ether-amide-PE (1-O-hexadecyl-2-N-palmitoyl-2-deoxy-sn-glycero-3-phosphoethanolamine) have been synthesized and characterized. The phase behavior and thermal transitions in buffer dispersions are examined by a combination of high-sensitivity differential scanning calorimetry (DSC) and small angle X-ray scattering (SAXS) experiments between 10 and 80 degrees C at pH 8.9. The onset temperatures determined from DSC measurements agree well with the starting temperatures of changes in the repeat distance obtained by SAXS measurements. The phases observed are lamellar both below and above the main phase transition. The phase transition temperatures and enthalpies depend strongly on the substitutions in sn-1 position and head group structure. The lamellar repeat distance in gel and liquid-crystalline phases increases with increasing temperature for L-ester-amide-PC and L-ether-amide-PC, whereas the temperature dependence is opposite for the L-ether-amide-PE. The observed behavior is discussed and compared with that of DPPC and DPPE, indicating the strong dependence of hydration and phase behavior on head group structure.     

Scan-rate dependence in protein calorimetry: the reversible transitions of Bacillus circulans xylanase and a disulfide-bridge mutant.

The stabilities of Bacillus circulans xylanase and a disulfide-bridge-containing mutant (S100C/N148C) were investigated by differential scanning calorimetry (DSC) and thermal inactivation kinetics. The thermal denaturation of both proteins was found to be irreversible, and the apparent transition temperatures showed a considerable dependence upon scanning rate. In the presence of low (nondenaturing) concentrations of urea, calorimetric transitions were observed for both proteins in the second heating cycle, indicating reversible denaturation occurs under those conditions. However, even for these reversible processes, the DSC curves for the wild-type protein showed a scan-rate dependence that was similar to that in the absence of urea. Calorimetric thermograms for the disulfide mutant were significantly less scan-rate dependent in the presence of urea than in the urea-free buffer. The present data show that, just as for irreversible transitions, the apparent transition temperature for the reversible denaturation of proteins can be scan-rate dependent, confirming the prediction of Lepock et al. (Lepock JR, Rithcie KP, Kolios MC, Rodahl AM, Heinz KA, Kruuf J, 1992, Biochemistry 31:12706-12712). The kinetic factors responsible for scan-rate dependence may lead to significant distortions and asymmetry of endotherms, especially at higher scanning rates. This points to the need to check for scan-rate dependence, even in the case of reversible denaturation, before any attempt is made to analyze asymmetric DSC curves by standard thermodynamic procedures. Experiments with the disulfide-bridge-containing mutant indicate that the introduction of the disulfide bond provides additional stabilization of xylanase by changing the rate-limiting step on the thermal denaturation pathway.     

N-Myristoylethanolamine-cholesterol (1:1) complex: first evidence from differential scanning calorimetry,fast-atom-bombardment mass spectrometry and computational modelling

The interaction of N-myristoylethanolamine (NMEA) with cholesterol is investigated by differential scanning calorimetry (DSC), fast-atom-bombardment mass spectrometry (FAB-MS) and computational modelling. Addition of cholesterol to NMEA leads to a new phase transition at 55 degrees C besides the chain-melting transition of NMEA at 72.5 degrees C. The enthalpy of the new transition increases with cholesterol content up to 50 mol%, but decreases thereafter, vanishing at 80 mol%. The enthalpy of the chain-melting transition of NMEA decreases with an increase in cholesterol; the transition disappears at 50 mol%. FAB-MS spectra of mixtures of NMEA and cholesterol provide clear signatures of the formation of ([NMEA+cholesterol]+) ([NMEA+cholesterol+Na]+). These results are consistent with the formation of a 1:1 complex between NMEA and cholesterol. Molecular modelling studies support this experimental finding and provide a plausible structural model for the complex, which highlights multiple H-bond interactions between the hydroxy group of cholesterol and the hydroxy and carbonyl groups of NMEA besides appreciable dispersion interaction between the hydrocarbon domains of the two molecules.     

Interactions of glycerol monooleate and dimethylsulphoxide with phospholipids A differential scanning calorimetry and 31P-NMR study

1. A comparative study has been made of the effects of the fusogens glycerol monooleate and dimethylsulphoxide on the polymorphic phase behaviour of dipalmitoyl phosphatidylcholine and dipalmitoyl phosphatidylethanolamine by differential scanning calorimetry and ³¹P-NMR techniques. 2. Glycerol monooleate induces a reduction in the temperature, cooperativity and enthalpy of the gel to liquid-crystal transitions of dipalmitoyl phosphatidylcholine and dipalmitoyl phosphatidylethanolamine, whereas dimethylsulphoxide induces an increase in the temperature and enthalpy and a reduction in the cooperativity of the gel to liquid-crystal transitions for those same phospholipids. 3. Glycerol monooleate induces the formation of isotropic and hexagonal (H_II) phases when mixed with either dipalmitoyl phosphatidylcholine or dipalmitoyl phosphatidylethanolamine. By contrast, in the presence of dimethylsulphoxide, those same phospholipids retain the lamellar configuration observed in the absence of fusogen. 4. These results are discussed in terms of the mechanisms of chemically induced cell fusion.     

Binding study of riboflavin-binding protein with riboflavin and its analogues by differential scanning calorimetry

Thermal unfolding parameters of hens' egg-white riboflavin-binding-protein (RBP) were measured by differential scanning calorimetry. Thermal denaturation scans of apoRBP and RBP complexes with riboflavin and its analogues (FMN, N10 DL-glyceryl isoalloxazine, and N10 -hydroxypentyl isoalloxazine) have been measured. It was found that ligand binding causes increase of RBP thermal stability, as manifested by a change of denaturation temperature from 60.8°C for apoRBP to 72.8°C for RBP—Rf complex. For RBP—FMN complex, the denaturation temperature of 73.0°C was even higher than for the RBP—Rf complex. The other two flavin analogues showed transition temperatures in between 66.9°C and 68.8°C, respectively. Analysis of excess heat capacity data showed that the best fit was the sum of two independent thermal transitions. One of the transitions, which contributed 70% to the total heat effect, has transition temperature in the broad range of 60.5–73.2°C; the other transition temperature is in the narrower range of 65.4–71.1°C. The observed transitions can be related to RBP domains.     

Thermal porosity analysis of croscarmellose sodium and sodium starch glycolate by differential scanning calorimetry

The aim of the study was to demonstrate the applicability of differential scanning calorimetry (DSC) on porosity analysis for cellulose and starch. Croscarmellose sodium (CCS) and sodium starch glycolate (SSG) were allowed to sorb moisture in 85%, 90%, 95%, and 100% relative humidity (RH) at 40°C for 24 hours. The pretreated samples were then subjected to DSC running temperature ranging from 25°C to −50°C at a cooling rate of 10°C/min. The cooling traces of water crystallization, if present, were transformed to porosity distribution via capillary condensation using Kelvin's equation. The porosity analysis of CCS and SSG was also done using nitrogen adsorption as a reference method. It was found that sorbed water could not be frozen (in cases of 85% and 90% RH) until the moisture content exceeded a cutoff value (in cases of 95% and 100% RH). The nonfreezable moisture content was referred to tightly bound, plasticizing water, whereas the frozen one may be attributed to loosely bound water condensation in pore structure of CCS and SSG surfaces. Not only capillary condensation but also the tightly bound, nonfreezable monolayer water lying along the inner pores of the surface contributed to porosity determination. Good agreement with less than 5% deviation of mean pore size was observed when the results were compared with nitrogen adsorption. The narrower pore size distributions, however, were obtained because of the limitations of the technique. It was concluded that pore analysis by DSC could be successful. Further research needs to be done to account for limitations and to extend the applicability of the technique.     

Successive phase-transition phenomena and phase diagram of the phosphatidylcholine-water system as revealed by differential scanning calorimetry

A completely dehydrated dipalmitoylphosphatidylcholine (DPPC) was prepared with dehydration under high vacuum and at a temperature above its main transition temperature. Thermal analyses on about forty different samples of the DPPC-water system indicated that the main transition temperature decreased stepwise with an increase in the water content to the limiting temperature at 42.6°C, reflecting the thermal behaviors of a total of five endothermic peaks. The pretransition appeared at a water content above 17 g%, and the predominant role of ‘newly incorporated water’ between the bilayers of DPPC molecules at the pretransition was made evident.     

Analysis of IgG kinetic stability by differential scanning calorimetry,probe fluorescence and light scattering

Monoclonal antibodies of the immunoglobulin G (IgG) type have become mainstream therapeutics for the treatment of many life‐threatening diseases. For their successful application in the clinic and a favorable cost‐benefit ratio, the design and formulation of these therapeutic molecules must guarantee long‐term stability for an extended period of time. Accelerated stability studies, e.g., by employing thermal denaturation, have the great potential for enabling high‐throughput screening campaigns to find optimal molecular variants and formulations in a short time. Surprisingly, no validated quantitative analysis of these accelerated studies has been performed yet, which clearly limits their application for predicting IgG stability. Therefore, we have established a quantitative approach for the assessment of the kinetic stability over a broad range of temperatures. To this end, differential scanning calorimetry (DSC) experiments were performed with a model IgG, testing chaotropic formulations and an extended temperature range, and they were subsequently analyzed by our recently developed three‐step sequential model of IgG denaturation, consisting of one reversible and two irreversible steps. A critical comparison of the predictions from this model with data obtained by an orthogonal fluorescence probe method, based on 8‐anilinonaphthalene‐1‐sulfonate binding to partially unfolded states, resulted in very good agreement. In summary, our study highlights the validity of this easy‐to‐perform analysis for reliably assessing the kinetic stability of IgGs, which can support accelerated formulation development of monoclonal antibodies by ranking different formulations as well as by improving colloidal stability models.     

The circular dichroism and differential scanning calorimetry study of the properties of DNA aptamer dimers

We have applied circular dichroism (CD), temperature-gradient gel electrophoresis (TGGE) and differential scanning calorimetry (DSC) to study the properties of novel bioengineered DNA aptamer dimers sensitive to fibrinogen (F) and heparin (H) binding sites of thrombin and compared them with canonical single stranded aptamer sensitive to fibrinogen binding site of thrombin (Fibri). The homodimer (FF) and heterodimer (FH) aptamers were constructed based on hybridization of their supported parts. CD results showed that both FF and FH dimers form stable guanine quadruplexes in the presence of potassium ions like those in Fibri. The thermal stability of aptamer dimers was slightly lower compared to those of canonical aptamers, but sufficient for practical applications. Both FF and FH aptamer dimers exhibited a potassium-dependent inhibitory effect on thrombin-mediated fibrin gel formation, which was on average two-fold higher than those of canonical single stranded Fibri aptamers.     

Role of solvation barriers in protein kinetic stability

The stability of several protein systems of interest has been shown to have a kinetic basis. Besides the obvious biotechnological implications, the general interest of understanding protein kinetic stability is emphasized by the fact that some emerging molecular approaches to the inhibition of amyloidogenesis focus on the increase of the kinetic stability of protein native states. Lipases are among the most important industrial enzymes. Here, we have studied the thermal denaturation of the wild-type form, four single-mutant variants and two highly stable, multiple-mutant variants of lipase from Thermomyces lanuginosa. In all cases, thermal denaturation was irreversible, kinetically controlled and conformed to the two-state irreversible model. This result supports that the novel molecular-dynamics-focused, directed-evolution approach involved in the preparation of the highly stable variants is successful likely because it addresses kinetic stability and, in particular, because heated molecular dynamics simulations possibly identify regions of disrupted native interactions in the transition state for irreversible denaturation. Furthermore, we find very large mutation effects on activation enthalpy and entropy, which were not accompanied by similarly large changes in kinetic urea m-value. From this we are led to conclude that these mutation effects are associated to some structural feature of the transition state for the irreversible denaturation process that is not linked to large changes in solvent accessibility. Recent computational studies have suggested the existence of solvation/desolvation barriers in at least some protein folding/unfolding processes. We thus propose that a solvation barrier (arising from the asynchrony between breaking of internal contacts and water penetration) may contribute to the kinetic stability of lipase from T. lanuginosa (and, possibly, to the kinetic stability of other proteins as well).     

南极细菌胞外多糖溶液冻结特性的差示扫描量热研究

采用差示扫描量热法,测定几种南极细菌胞外多糖(简称,EPSs)溶液的结晶、熔融、焓转变以及水合性质等冻结特性,分析了EPSs的浓度和分子量与其抗冻活性的关系.结果表明,在溶液冻结过程中,仅0.25%的Pseudoalteromonas sp.S-15-13 EPSs(分子量,6.2×104Da)可抑制冰核形成,溶液冻结温度较纯水的降低(1.07±0.62)℃;溶液的冻结焓降低说明冰核生长变缓,冰晶形成细小,0.125%的Shewanella sp.5-1-11-4 EPSs(分子量,1.2×103Da)和Moritella sp.2-5-10-1 EPSs(分子量,3.0×103Da)冻结焓分别较纯水的降低17.15%和29.13%,S-15-13 EPSs在0.125%～0.5%的范围内可降低冻结焓,0.125%时冻结焓较纯水的低30%,其不冻水含量为(0.292 ±0.05) g/g.在冰晶熔化过程中,几种EPSs均可降低溶液熔融温度和熔融焓,促进冰晶熔化,使冰晶细小;4.0%的5-1-11-4 EPSs、2-5-10-1 EPSs和0.5% S-15-13 EPSs的熔融温度较纯水的分别降低(2.70±0.15)℃、(2.30±0.39)℃和(4.66±0.42)℃.研究结果阐明EPSs可以通过改变菌体周围水的冻结特性,以抵御冰晶对微生物的损伤,大分子量EPSs对冰晶的抑制作用强于低分子量的.     

Observation of complex thermal transitions for mixed micelle solutions containing alkyldimethylphosphine oxides and phospholipids and the accompanying cloud points

The thermal properties of various mixtures of two nonionic surfactants, decyldimethylphosphine oxide (APO10) and dodecyldimethylphosphine oxide (APO12) and two phospholipids, dimyristoylphosphatidyl choline (DMPC) and dipalmitoylphosphatidyl choline (DPPC), were examined by differential scanning calorimetry at various mole fractions. The addition of APO12 to DMPC multilamellar vesicles lowered the temperature of the main transition, produced considerable broadening, and eliminated the pre-transition. Phase separation, as evidenced by the existence of a cloud point, T(cp), occurred when the mole fraction of APO12, with respect to DMPC was 0.58 and above. A small abrupt increase in heat capacity was observed at, or slightly above, the cloud point of APO12 and all mixed micelle solutions. It appeared that mixed micelles coexisted with mixed bilayers when the mole fraction was between 0.58 and 0.75 and perhaps as low as a mole ratio of 0.32. All of the mixtures, except APO12/DMPC, exhibited a clear endotherm below the temperature corresponding to the cloud point, which likely reflects the growth in micellar size. Overlapping chain length dependent endothermic peaks, perhaps resulting from reorganization and/or continued association of the micelles, were observed above the cloud point for all of the mixtures except for APO10/DMPC solutions. However, solutions of mixed micelles consisting of APO10/DMPC with mole fractions of surfactant between 0.81 and 0.93 portrayed a broad unidentified exotherm of about 2+/-1 kcal/mol, which was centered nearly 10-20 degrees C above the cloud point.     

Phase separations induced by melittin in negatively-charged phospholipid bilayers as detected by fluorescence polarization and differential scanning calorimetry

Interactions between melittin and a variety of negatively-charged lipid bilayers have been investigated by intrinsic fluorescence, fluorescence polarization of 1,6-diphenylhexatriene and differential scanning calorimetry. (1) Intrinsic fluorescence of the single tryptophan residue of melittin shows that binding of this peptide to negatively-charged phospholipids is directly related to the surface charge density, but is unaffected by the physical state of lipids, fluid or gel, single-shell vesicles or unsonicated dispersions. (2) Changes in the thermotropic properties of negatively-charged lipids upon melittin binding allow to differentiate two groups of lipids: (i) A progressive disappearance of the transition, without any shift in temperature, is observed with monoacid C₁₄ lipids such as dimyristoylphosphatidylglycerol and -serine (group 1). (ii) With a second group of lipids (group 2), a transition occurs even at melittin saturation, and two transitions are detected at intermediate melittin content, one corresponding to remaining unperturbed lipids, the other shifted downward by 10–20°C. This second group of lipids is constituted by monoacid C₁₆ lipids, dipalmitoylphosphatidylglycerol and -serine. Phosphatidic acids also enter this classification, but it is the net charge of the phosphate group which allows to discriminate: singly charged phosphatidic acids belong to group 2, whereas totally ionized ones behave like group 1 lipids, whatever the chain length. (3) It is concluded that melittin induces phase separations between unperturbed lipid regions which give a transition at the same temperature as pure lipid, and peptide rich domains in which the stoichiometry is 1 toxin per 8 phospholipids. The properties of such domains depend on the bilayer stability: in the case of C₁₆ aliphatic chains and singly charged polar heads, the lipid-peptide domains have a transition at a lower temperature than the pure lipid. With shorter C₁₄ chains or with two net charges by polar group, the bilayer structure is probably totally disrupted, and the new resulting phase can no longer lead to a cooperative transition.     

Differential scanning calorimetry of milk fat globule membranes

Differential scanning calorimetry was employed as an aid in examining the structure of the bovine milk fat globule membrane. At least six major endotherms are observed between 10 and 90°C, corresponding to order-disorder transitions of discrete structural domains of the membrane. These endothermic transitions occur at 16, 28, 43, 58, 68, and 75°C. The transitions occurring between 10 and 50°C were reversible, suggesting the involvement of lipid. However, the high temperature transitions were irreversible. The calorimetric C transition, centered at 43°C, was shown to involve neutral lipid, since the endotherm was reversible, insensitive to proteolysis, and similar to the endotherm of the isolated neutral lipid fraction of the milk fat globule membrane. The glycolipid and phospholipid fractions of the milk fat globule membrane yielded endotherms outside of the temperature range of the C transition. Another endotherm, the D transition (58°C), was found to involve the denaturation of the major membrane coat protein, butyrophilin (band 12). Evidence for this assignment included the following observations: (i) the nearly selective proteolysis of butyrophilin resulted in the complete removal of the D transition, (ii) the butyrophilin-enriched, Triton X-100-insoluble pellet of milk fat globule membrane yielded a relatively normal D transition, and (iii) the irreversible, disulfide-stabilized aggregation of butyrophilin occurred in the membrane solely at the temperature of the D transition. Furthermore, no other prominent milk fat globule membrane polypeptide formed these non-native disulfide crossbridges during the D transition. The sources of the other major endotherms of the milk fat globule membrane have not yet been assigned.     

Monitoring the kinetics and thermodynamics of interfacial enzymatic catalysis by differential scanning calorimetry

Using phase transition profile as an indicator of thermodynamic property and phase transition heat as the second indicator of the percentage of substrates unhydrolyzed, differential scanning calorimetry has been used to observe in detail the kinetics and thermodynamics of phospholipase A(2)-catalyzed 1,2-dipalmitoyl-sn-glycero-3-phosphocholine large unilamellar vesicle (LUV) hydrolysis. Phase transition profiles show that the original LUV almost completely changes into a novel aggregate at the end of the latency, followed by an abrupt activation of the reaction. The phase transition profiles are asymmetric between the heating and cooling curves, indicating a thermodynamic mesostatic property of the system. The reaction in activated phase follows a single first-order kinetics and all of the substrates in vesicles can be hydrolyzed. All these evidences indicate that the products and substrates can freely exchange between the outer and the inner layers of the vesicles and the membrane of the vesicle in the activated phase is permeable. This permeability favors the exchange of the substrates and products, thus, resulting in the activation of the fast reaction.     

Quantitative measurement of indomethacin crystallinity in indomethacin-silica gel binary system using differential scanning calorimetry and X-ray powder diffractometry

Differential scanning calorimetry (DSC) and X-ray powder diffractometry (XRPD) methods were developed for the quantitative analysis of the crystallinity of indomethacin (IMC) in IMC and silica gel (SG) binary system. The DSC calibration curve exhibited better linearity than that of XRPD. No phase transformation occurred in the IMC-SG mixtures during DSC measurement. The major sources of error in DSC measurements were inhomogeneous mixing and sampling. Analyzing the amount of IMC in the mixtures using high-performance liquid chromatography (HPLC) could reduce the sampling error. DSC demonstrated greater sensitivity and had less variation in measurement than XRPD in quantifying crystalline IMC in the IMC-SG binary system. Published: February, 10, 2006     

Multidomain structure of a recombinant streptokinase. A differential scanning calorimetry study

The temperature dependence of the heat capacity function of a recombinant streptokinase (rSK) has been studied by high-sensitivity differential scanning microcalorimetry and circular dichroism as a function of pH in low- and high-ionic strength buffers. At low ionic strength it is found that this protein, between pH 7 and 10, undergoes four reversible and independent two-state transitions during its unfolding, suggesting the existence of four domains in the native structure of the protein. This result reconciles previous conflicting reports about the number of domains of this protein obtained by differential scanning calorimetry and small-angle X-ray scattering. The number of two-state transitions decreases when the pH of the medium is decreased, without noticeable changes in its circular dichroism spectrum. A plausible localization of the four domains in the streptokinase sequences is proposed and their thermodynamic parameters are given. Increase of ionic strength to 200 mM NaCl affects positively the protein stability and confirms the existence of four reversible two-state transitions. Above 200 mM NaCl the protein stability decreases, resulting in low percentage of reversibility, and even irreversible transitions.     

Melatonin strongly interacts with zwitterionic model membranes—evidence from Fourier transform infrared spectroscopy and differential scanning calorimetry

Interactions of melatonin with zwitterionic dipalmitoyl phosphatidylcholine (DPPC) multilamellar liposomes (MLVs) were investigated as a function of temperature and melatonin concentration (1-30 mol%) by using two noninvasive techniques, namely Fourier transform infrared (FTIR) spectroscopy and differential scanning calorimetry (DSC). The investigation of the C-H, CO, and PO₂⁻ antisymmetric double stretching modes in FTIR spectra and DSC studies reveal that melatonin changes the physical properties of the DPPC bilayers by decreasing the main phase transition temperature, abolishing the pretransition, ordering the system in the gel phase, and increasing the dynamics of the system both in the gel and liquid crystalline phases. It also causes significant decrease in the wavenumber for the CO stretching and PO₂⁻ antisymmetric double bond stretching bands, which indicates strong hydrogen bonding The results imply that melatonin locates in the interfacial region of the membrane. Furthermore, in the DSC curve, more than one signal is observed at high melatonin concentrations (24 and 30 mol%), which indicates melatonin-induced phase separation in DPPC membranes.