An open tubular capillary electrochromatography column with porous inner surface for protein separation

An open tubular capillary electrochromatography (OTCEC) column using sole porogen to form porous inner surface has been developed. The porous layer was coated on the capillary inner wall by in situ polymerization in the presence of porogen. The results show that the columns using 1-propanol as sole porogen are appropriate for protein separation. It has higher separation efficiency than the column with the usual coporogen due to much more micropores and mesopores on the porous surface and a higher specific surface area. In addition, the sensitivity of the prepared OTCEC column was improved greatly compared with the dynamically coated capillary with polyvinylpyrrolidone.     

Preparation and characterization of a new open‐tubular capillary column for enantioseparation by capillary electrochromatography

In order to use the enantioseparation capability of cationic cyclodextrin and to combine the advantages of capillary electrochromatography (CEC) with open‐tubular (OT) column, in this study, a new OT‐CEC, coated with cationic cyclodextrin (1‐allylimidazolium‐β‐cyclodextrin [AI‐β‐CD]) as chiral stationary phase (CSP), was prepared and applied for enantioseparation. Synthesized AI‐β‐CD was characterized by infrared (IR) spectrometry and mass spectrometry (MS). The preparation conditions for the AI‐β‐CD‐coated column were optimized with the orthogonal experiment design L₉(3⁴). The column prepared was characterized by scanning electron microscopy (SEM) and elemental analysis (EA). The results showed that the thickness of stationary phase in the inner surface of the AI‐β‐CD‐coated columns was about 0.2 to 0.5 μm. The AI‐β‐CD content in stationary phase based on the EA was approximately 2.77 mmol·m^?2. The AI‐β‐CD‐coated columns could separate all 14 chiral compounds (histidine, lysine, arginine, glutamate, aspartic acid, cysteine, serine, valine, isoleucine, phenylalanine, salbutamol, atenolol, ibuprofen, and napropamide) successfully in the study and exhibit excellent reproducibility and stability. We propose that the column, coated with AI‐β‐CD, has a great potential for enantioseparation in OT‐CEC.     

Electrochromatographic separation of hydrophobic amino acid enantiomers by molecularly imprinted capillary columns

In the present study, the enantiomeric forms of hydrophobic amino acids (l-tryptophan, l-tyrosine, and l-phenylalanine) were separated by molecularly imprinted capillary columns (MICC) via Capillary Electrochromatography (CEC) for the first time. The monomer ratio, crosslinker ratio, template molecule ratio, the porogen ratio and type, polymerization time, and also the effect of temperature were examined to increase the permeability properties of MICC. FTIR, SEM and BET analyses were realized for the characterization of MICC. The effect of the electric field, organic solvent ratio, and pressure were carried out experimentally to determine the optimum conditions. The separation performances of MICC and the non-imprinted capillary columns (NICC) were compared electrochromatographically.     

Optimization of capillary coating by hydroxyethyl methacrylate for capillary zone electrophoresis of proteins

This work describes further improvements of coating fused silica capillaries with 2-hydroxyethyl methacrylate (HEMA) by atom transfer radical polymerization (ATRP). First, endcapping with a sterically less bulky silanyl reagent reduces the electrosmotic flow (EOF) by 25% in addition to the 40% EOF reduction caused by HEMA coating compared to a bare fused silica capillary. An additional hydrolysis step was introduced into the preparation of HEMA coated capillaries and leads to better reproducible migration times. The influence of the solvent during ATRP and the resulting polymer coating was investigated by replacement of DMF with water or water-methanol mixtures. The quality of the optimized coating was characterized by protein separations at pH 3. HEMA coated capillaries reveal up to 746000 plates. The polyvinyl alcohol (PVA) coated capillary provides only half of this efficiency. A long-term test at pH 9 shows good stability of the HEMA coated capillaries in basic medium. Also the numbers of plates in this medium was about 30% higher than for separations with the PVA capillary. In addition, the phosphate buffer was replaced by a volatile ammonium acetate buffer for later use with mass spectrometry (MS).     

Electrochromatographic enantioseparation of amino acids using polybutylmethacrylate-based chiral monolithic column by capillary electrochromatography

This article describes the development of a polybutylmethacrylate‐based monolithic capillary column as a chiral stationary phase. The chiral monolithic column was prepared by polymerization of butyl methacrylate (BMA), ethylene dimethacrylate (EDMA), and N‐methacryloyl‐l ‐glutamic acid (MAGA) in the presence of porogens. The porogen mixture included N,N‐dimethyl formamide and phosphate buffer. MAGA was used as a chiral selector. The effect of MAGA content was investigated on electrochromatographic enantioseparation of d,l ‐histidine, d,l ‐tyrosine, d,l ‐phenyl alanine, and d,l ‐glutamic acid. The effect of acetonitrile (ACN) content in mobile phase on electro‐osmotic flow was also investigated. It was demonstrated that the poly(BMA‐EDMA‐MAGA) monolithic chiral column can be used for the electrochromatographic enantioseparation of amino acids by capillary electrochromatography (CEC). The mobile phase was ACN/10 mM phosphate buffer (45:55%) adjusted to pH 2.7. It was observed that l ‐enantiomers of the amino acids migrated before d ‐enantiomers. The separation mechanism of electrochromatographic enantioseparation of amino acids in CEC is discussed. Chirality 24:606–609, 2012. © 2012 Wiley Periodicals, Inc.     

Preparation and evaluation of bovine serum albumin immobilized chiral monolithic column for affinity capillary electrochromatography

A system of capillary silica monolith with bovine serum albumin (BSA) functionalized through two approaches for affinity monolithic capillary electrochromatography (AMCEC) was developed. Covalent immobilization conditions for two different Schiff base methods, which employed 3-glycidopropyl trimethoxysilane (GPTS) and 3-aminopropyl trimethoxysilane (APTS) as starting materials, respectively, were investigated to obtain good and stable chiral separation. The BSA immobilized silica monoliths were evaluated in terms of morphology, electroosmotic flow, retention time, column efficiency and resolution of model compound (±)-tryptophan. The columns exhibited satisfactory run-to-run, column-to-column repeatability and maintained their enantioselectivity for more than 3 months. Both developed methods can baseline separate tryptophan enantiomers, whereas shorter retention time, better column efficiency, and enantiomeric recognition between two pairs of drug enantiomers (pantoprazole and atenolol) were obtained by the GPTS method.     

On-line combination of capillary isoelectric focusing and capillary non-gel sieving electrophoresis using a hollow-fiber membrane interface: a novel two-dimensional separation system for proteins

A novel two-dimensional (2D) separation system for proteins was reported. In the system, a piece of dialysis hollow-fiber membrane was employed as the interface for on-line combination of capillary isoelectric focusing (CIEF) and capillary non-gel sieving electrophoresis (CNGSE). The system is similar equivalent to two-dimensional polyacrylamide gel electrophoresis (2D PAGE), by transferring the principal of 2D PAGE separation to the capillary format. Proteins were focused and separated in first dimension CIEF based on their differences in isoelectric points (pIs). Focused protein zones was transferred to the dialysis hollow-fiber interface, where proteins hydrophobically complexed with sodium dodecyl sulfate (SDS). The negatively charged proteins were electromigrated and further resolved by their differences in size in the second dimension CNGSE, in which dextran solution, a replaceable sieving matrix instead of cross-linked polyacrylamide gel was employed for size-dependent separation of proteins. The combination of the two techniques was attributed to high efficiency of the dialysis membrane interface. The feasibility and the orthogonality of the combined CIEF-CNGSE separation technique, an important factor for maximizing peak capacity or resolution elements, were demonstrated by examining each technique independently for the separation of hemoglobin and protein mixtures excreting from lung cancer cells of rat. The 2D separation strategy was found to greatly increase the resolving power and overall peak capacity over those obtained for either dimension alone.