Ibuprofen and warfarin modulate allosterically ferrous human serum heme-albumin nitrosylation

Ferrous human serum heme–albumin (HSA–heme–Fe(II)) displays globin-like properties. Here, the effect of ibuprofen and warfarin on kinetics of HSA–heme–Fe(II) nitrosylation is reported. Values of the second-order rate constant for HSA–heme–Fe(II) nitrosylation (k_on) decrease from 6.3 × 10⁶ M⁻¹ s⁻¹ in the absence of drugs, to 4.1 × 10⁵ M⁻¹ s⁻¹ and 4.8 × 10⁵ M⁻¹ s⁻¹, in the presence of saturating amounts of ibuprofen and warfarin, respectively, at pH 7.0 and 20.0 °C. From the dependence of k_on on the drug concentration, values of the dissociation equilibrium constant for ibuprofen and warfarin binding to HSA–heme–Fe(II) (i.e., K = 3.2 × 10⁻³ M and 2.6 × 10⁻⁴ M, respectively) were determined. The observed allosteric effects could indeed reflect ibuprofen and warfarin binding to the regulatory fatty acid binding site FA2, which brings about an alteration of heme coordination, slowing down HSA–heme–Fe(II) nitrosylation. Present data highlight the allosteric modulation of HSA–heme–Fe(II) reactivity by heterotropic effectors.     

Properties of noncatalytic sites of thioredoxin-activated chloroplast coupling factor 1

Nucleotide binding properties of two vacant noncatalytic sites of thioredoxin-activated chloroplast coupling factor 1 (CF₁) were studied. Kinetics of nucleotide binding to noncatalytic sites is described by the first-order equation that allows for two nucleotide binding sites that differ in kinetic features. Dependence of the nucleotide binding rate on nucleotide concentration suggests that tight nucleotide binding is preceded by rapid reversible binding of nucleotides. ADP binding is cooperative. The preincubation of CF₁ with Mg²⁺ produces only slight effect on the rate of ADP binding and decreases the ATP binding rate. The ATP and ADP dissociation from noncatalytic sites is described by the first-order equation for similar sites with dissociation rate constants k₋₂(ADP)=1.5×10⁻¹ min⁻¹ and k₋₂(ATP)≅10⁻³ min⁻¹, respectively. As follows from the study, the noncatalytic sites of CF₁ are not homogeneous. One of them retains the major part of endogenous ADP after CF₁ precipitation with ammonium sulfate. Its other two sites can bind both ADP and ATP but have different kinetic parameters and different affinity for nucleotides.     

Multiarmed star-like platinum nanowires with multienzyme assembly for direct electronic determination of carcinoembryoninc antigen in serum

A new electrochemical immunoassay strategy for direct detection of carcinoembryoninc antigen (CEA) in serum was developed by using multiarmed star-like platinum nanowires (PtNWs) with biomolecular assembly as signal tags on an anti-CEA-functionalized graphene sensing platform. Initially, the PtNWs were synthesized via a wet chemical method, and then the synthesized PtNWs were used for the co-immobilization of CEA and horseradish peroxidase (HRP). Compared with platinum nanoparticles, the prepared PtNWs could provide a large room for the conjugation of HRP and CEA. With a competitive-type immunoassay format, the assay was performed in two types of supporting electrolytes including new born cattle serum (NBCS) and acetate buffer solution (ABS, pH 5.5), respectively. Similar detection limit (LOD) of 5.0 pg mL⁻¹vs. 1.0 pg mL⁻¹ but narrower dynamic working linear range of 0.01–60 ng mL⁻¹vs. 0.002–80 ng mL⁻¹ was obtained toward CEA standards in the NBCS compared to the ABS. The intra-assay coefficients of variation (CVs) were 4.3%, 8.6%, and 6.2% at 0.05, 10, and 40 ng mL⁻¹ CEA, respectively, while the inter-assay CVs were 7.6%, 10.5%, and 8.9% at the above-mentioned levels, respectively. In addition, the selectivity and stability of the electrochemical immunosensor were acceptable. Importantly, the developed method was used to assay clinical serum specimens, receiving a good relation with those obtained from the referenced method.     

Quantitative measurement of binding kinetics in sandwich assay using a fluorescence detection fiber-optic biosensor

Fiber-optic biosensors have been studied intensively because they are very useful and important tools for monitoring biomolecular interactions. Here we describe a fluorescence detection fiber-optic biosensor (FD-FOB) using a sandwich assay to detect antibody-antigen interaction. In addition, the quantitative measurement of binding kinetics, including the association and dissociation rate constants for immunoglobulin G (IgG)/anti-mouse IgG, is achieved, indicating 0.38 × 10⁶ M⁻¹ s⁻¹ for k_a and 3.15 × 10⁻³ s⁻¹ for k_d. These constants are calculated from the fluorescence signals detected on fiber surface only where the excited evanescent wave can be generated. Thus, a confined fluorescence-detecting region is achieved to specifically determine the binding kinetics at the vicinity of the interface between sensing materials and uncladded fiber surface. With this FD-FOB, the mathematical deduction and experimental verification of the binding kinetics in a sandwich immunoassay provide a theoretical basis for measuring rate constants and equilibrium dissociation constants. A further measurement to study the interaction between human heart-type fatty acid-binding protein and its antibody gave the calculated kinetic constants k_a, k_d, and K_D as 8.48 × 10⁵ M⁻¹ s⁻¹, 1.7 × 10⁻³ s⁻¹, and 2.0 nM, respectively. Our study is the first attempt to establish a theoretical basis for the florescence-sensitive immunoassay using a sandwich format. Moreover, we demonstrate that the FD-FOB as a high-throughput biosensor can provide an alternative to the chip-based biosensors to study real-time biomolecular interaction.     

Isoliquiritigenin, a chalcone compound, is a positive allosteric modulator of GABAA receptors and shows hypnotic effects

Isoliquiritigenin (ILTG) is a chalcone compound and has valuable pharmacological properties such as antioxidant, anti-inflammatory, anticancer, and antiallergic activities. Recently, the anxiolytic effect of ILTG has been reported; however, its action mechanism and hypnotic activity have not yet been demonstrated. Therefore, we investigated the hypnotic effect and action mechanism of ILTG. ILTG significantly potentiated the pentobarbital-induced sleep in mice at doses of 25 and 50 mg/kg. The hypnotic activity of ILTG was fully inhibited by flumazenil (FLU), a specific gamma-aminobutyric acid type A (GABA_A)–benzodiazepine (BZD) receptor antagonist. The binding affinity of ILTG was 0.453 μM and was found to be higher than that of the reference compound, diazepam (DZP, 0.012 μM). ILTG (10⁻⁵ M) potentiated GABA-evoked currents to 151% of the control level on isolated dorsal raphe neurons. ILTG has 65 times higher affinity for GABA_A–BZD receptors than DZP, and the dissociation constant for ILTG was 4.0 × 10⁻¹⁰ M. The effect of ILTG on GABA currents was blocked by 10⁻⁷ M FLU and ZK-93426. These results suggest that ILTG produces hypnotic effects by positive allosteric modulation of GABA_A–BZD receptors.     

An organic–inorganic hybrid nanostructure-functionalized electrode for electrochemical immunoassay of biomarker by using magnetic bionanolabels

A new electrochemical immunoassay of alpha-fetoprotein (AFP) was developed on an organic–inorganic hybrid nanostructure-functionalized carbon electrode by coupling with magnetic bionanolabels. Multi-walled carbon nanotubes (CNTs), single-stranded DNA, thionine and AFP were utilized for the construction of the immunosensor, while the core–shell Fe₃O₄-silver nanocomposites were employed for the label of horseradish peroxidase-anti-AFP conjugates (HRP-anti-AFP-AgFe). Electrochemical measurement toward AFP was carried out by using magnetic bionanolabels as traces and H₂O₂ as enzyme substrate with a competitive-type immunoassay mode. Experimental results indicated that the immunosensors with carbon nanotubes and DNA exhibited better electrochemical responses than those of without carbon nanotubes or DNA. Under optimal conditions, the electrochemical immunosensor by using HRP-anti-AFP-AgFe as signal antibodies exhibited a linear range of 0.001–200 ng mL⁻¹ AFP with a low detection limit of 0.5 pg mL⁻¹ at 3s_B. Both intra- and inter-assay coefficients of variation were 7.3%, 9.4%, 8.7% and 10.2%, 7.8%, 9.4% toward 0.01, 30, 120 ng mL⁻¹ AFP, respectively. The specificity and stability of the electrochemical immunoassay were acceptable. In addition, the methodology was validated for 12 clinical serum specimens including 9 positive specimens and 3 normal specimens, receiving a good correlation with the results obtained from the referenced electrochemiluminescence assay.     

Biosensor analysis of anti-citrullinated protein/peptide antibody affinity

Anti-citrullinated protein/peptide antibodies (ACPAs) are detected in rheumatoid arthritis (RA) sera and because of their strict association with the disease are considered marker antibodies, probably endowed with pathogenic potential. Antibody affinity is one of the parameters affecting pathogenicity. Three diagnostic citrullinated peptides—viral citrullinated peptide 1 (VCP1) and VCP2 derived from Epstein–Barr virus (EBV)-encoded proteins and histone citrullinated peptide 1 (HCP1) derived from histone H4—were synthesized as tetrameric multiple antigen peptides and immobilized on sensor chips CM5 type in a Biacore T100 instrument. Specific binding of purified antibodies from RA patients to the three peptides was analyzed by surface plasmon resonance using two arginine-containing sequences as controls. Employing a 1:1 binding model for affinity constant calculation, ACPAs interacted with VCP1 and VCP2 with lower apparent affinity (10⁻⁶ M > K_D > 10⁻⁷ M) and interacted with HCP1 with higher apparent affinity (K_D = 10⁻⁸ M). The results indicate that the binding to citrullinated peptides is characterized by wide differences in affinity, with slower association and faster dissociation rates in the case of antibodies to viral citrullinated peptides as compared with antibodies specific for the histone peptide. This biosensor analysis shows the high cross-reactivity of purified ACPAs that bind other citrullinated peptides besides the one used for purification.     

Electrochemical immunosensor based on Pd–Au nanoparticles supported on functionalized PDDA-MWCNT nanocomposites for aflatoxin B1 detection

This paper reports a label-free electrochemical immunosensor for the determination of aflatoxin B1 (AFB1), which is based on a gold electrode modified by a biocompatible film of carbon nanotubes/poly(diallyldimethylammoniumchloride)/Pd–Au nanoparticles (CNTs/PDDA/Pd–Au). The nanocomposite was characterized by transmission electron microscopy and the electrochemical behavior of modified electrodes was investigated by cyclic voltammetry. The CNTs/PDDA/Pd–Au nanocomposites film showed good electron transfer ability, which ensured high sensitivity to detect AFB1 in a range from 0.05 to 25 ng mL⁻¹ with a detection limit of 0.03 ng mL⁻¹ obtained at 3σ (where σ is the standard deviation of the blank solution, n = 10). The proposed immunosensor provides a simple tool for AFB1 detection. This strategy can be extended to any other antigen detection by using the corresponding antibodies.     

Voltammetric behavior of complexation of salbutamol with calf thymus DNA and its analytical application

The interaction of salbutamol (Sal), an animal growth promoter, with DNA was investigated by differential pulse voltammetry (DPV), cyclic voltammetry (CV), and fluorescence spectroscopy. An irreversible reduction was observed from the cyclic voltammograms, and the reaction mechanism involved a one-electron change irreversible oxidation. In the presence of DNA, the DPV peak current decreased and the Sal peak shifted to higher potentials, indicating that Sal interacted with DNA to form an intercalation Sal–DNA complex. In addition, reaction binding parameters were extracted from the DPV data with the use of the multivariate curve resolution–alternating least squares (MCR–ALS) method; the binding constant and ratio were found to be (2.0 ± 0.5) × 10⁵ M⁻¹ and 1:1, respectively. Quantitative voltammetric analysis of Sal was performed in the concentration range of 3.02 × 10⁻⁶ to 1.23 × 10⁻⁴ mol L⁻¹, and it was found that the detection limit was 5.11 × 10⁻⁷ mol L⁻¹ in the presence of 1.00 × 10⁻⁶ mol L⁻¹ DNA. The method was applied for the determination of Sal in spiked urine and human serum samples, and the calibration was successfully verified.     

Biointeraction analysis by high-performance affinity chromatography: Kinetic studies of immobilized antibodies

A system based on high-performance affinity chromatography was developed for characterizing the binding, elution and regeneration kinetics of immobilized antibodies and immunoaffinity supports. This information was provided by using a combination of frontal analysis, split-peak analysis and peak decay analysis to determine the rate constants for antibody–antigen interactions under typical sample application and elution conditions. This technique was tested using immunoaffinity supports that contained monoclonal antibodies for 2,4-dichlorophenoxyacetic acid (2,4-D). Association equilibrium constants measured by frontal analysis for 2,4-D and related compounds with the immobilized antibodies were 1.7–12 × 10⁶ M⁻¹ at pH 7.0 and 25 °C. Split-peak analysis gave association rate constants of 1.4–12 × 10⁵ M⁻¹ s⁻¹ and calculated dissociation rate constants of 0.01–0.4 s⁻¹ under the application conditions. Elution at pH 2.5 for the analytes from the antibodies was examined by peak decay analysis and gave dissociation rate constants of 0.056–0.17 s⁻¹. A comparison of frontal analysis results after various periods of column regeneration allowed the rate of antibody regeneration to be examined, with the results giving a first-order regeneration rate constant of 2.4 × 10⁻⁴ s⁻¹. This combined approach and the information it provides should be useful in the design and optimization of immunoaffinity chromatography and other analytical methods that employ immobilized antibodies. The methods described are not limited to the particular analytes and antibodies employed in this study but should be useful in characterizing other targets, ligands and supports.     

The interaction between wheat germ agglutinin and membrane incorporated glycophorin A. An optical binding study

A novel integrated optical technique is used to monitor the kinetics of incorporation of glycophorin A (GPA) from solution into a planar dimyristoylphosphatidylcholine-cholesterol bilayer membrane, and the subsequent binding of wheat germ agglutinin (WGA) to the membrane-incorporated GPA. The technique significantly improves the attainable accuracy of kinetic measurements. The number of bound molecules can be determined to a precision of ca ± 80 mol µm^–2. Our results show that GPA incorporates spontaneously into the bilayer. Binding of WGA to GPA is optimal in the presence of human serum albumin, and can be reversed byN-acetyl-d-glucosamine. The kinetics of the binding are consistent with the presence of two classes of kinetically distinguishable binding sites with association rates of 2.0×10⁴ and 9.6×10² M^–1 s^–1, and dissociation rates of 2.7×10^–3 s^–1 and <10^–5 s^–1, respectively. A stoichiometry of 4 WGA monomers per GPA monomer was determined as characteristic of the overall binding interaction.Abbreviations DMPC dimyristoylphosphatidylcholine - GlcNAc N-acetyl-d-glucosamine - GPA glycophorin A - HSA human serum albumin - NeuNAc N-acetyl-d-neuraminic acid - TE transverse electric - TM transverse magnetic - WGA wheat germ agglutinin     

New synthesis of 6[3-(1-adamantyl)-4-methoxyphenyl]-2-naphthoic acid and evaluation of the influence of adamantyl group on the DNA binding of a naphthoic retinoid

6[3-(1-Adamantyl)-4-methoxyphenyl]-2-naphthoic acid (Adapalene®), a synthetic aromatic retinoid specific for RARβ and RARγ receptors, has been prepared utilizing a Pd/C-mediated Suzuki coupling between 6-bromo-2-naphthoic acid and 4-methoxyphenyl boronic acid, followed by introduction of an adamantyl group in the position 3 of the formed 6-(4-methoxyphenyl)-2-naphthoic acid. The interaction of 6-(4-methoxyphenyl)-2-naphthoic acid/ethyl ester and the 3-adamantyl analogs with DNA was studied in aqueous solution at physiological conditions by UV–vis spectroscopy. The calculated binding constants K_ligand–DNA ranged between 1.1 × 10⁴ M⁻¹ and 1.1 × 10⁵ M⁻¹, the higher values corresponding to those of the adamantylated compounds. Molecular modeling studies have emphasized that the intercalative binding of adapalene and its derivatives to DNA is mainly stabilized by hydrophobic interactions related to the presence of the adamantyl group.     

An electrochemical sensor based on single-stranded DNA-poly(sulfosalicylic acid) composite film for simultaneous determination of adenine, guanine, and thymine

Poly(sulfosalicylic acid) and single-stranded DNA composite (PSSA–ssDNA)-modified glassy carbon electrode (GCE) was prepared by electropolymerization and then successfully used to simultaneously determine adenine (A), guanine (G), and thymine (T). The characterization of electrochemically synthesized PSSA–ssDNA film was investigated by scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS). The modified electrode exhibited enhanced electrocatalytic behavior and good stability for the simultaneous determination of A, G, and T in 0.1 M phosphate buffer solution (PBS, pH 7.0). Well-separated voltammetric peaks were obtained among A, G, and T presented in the analyte mixture. Under the optimal conditions, the peak currents for A, G, and T increased linearly with the increase of analyte mixture concentration in the ranges of 6.5 × 10⁻⁸ to 1.1 × 10⁻⁶, 6.5 × 10⁻⁸ to 1.1 × 10⁻⁶, and 4.1 × 10⁻⁶ to 2.7 × 10⁻⁵ M, respectively. The detection limits (signal/noise = 3) for A, G, and T were 2.2 × 10^–8, 2.2 × 10^–8, and 1.4 × 10^–6 M, respectively.     

Measuring kinetic dissociation/association constants between Lactococcus lactis bacteria and mucins using living cell probes

In this work we focused on quantifying adhesion between Lactococcus lactis, the model for lactic acid bacteria (LAB) and mucins. Interactions between two strains of L. lactis (IBB477 and MG1820 as control) and pig gastric mucin–based coating were measured and compared with the use of atomic force microscopy. Analysis of retraction force-distance curves shed light on the differential contributions of nonspecific and specific forces. An increased proportion of specific adhesive events was obtained for IBB477 (20% vs. 5% for the control). Blocking assays with free pig gastric mucin and its O-glycan moiety showed that oligosaccharides play a major (but not exclusive) role in L. lactis-mucins interactions. Specific interactions were analyzed in terms of kinetic constants. An increase in the loading rate of atomic force microscope tip led to a higher force between interacting biological entities, which was directly linked to the kinetic dissociation constant (K_off). Enhancing the contact time between the tip and the sample allowed an increase in the interaction probability, which can be related to the kinetic association constant (K_on). Variations in the loading rate and contact time enabled us to determine K_on (3.3 × 10² M⁻¹·s⁻¹) and K_off (0.46 s⁻¹), and the latter was consistent with values given in the literature for sugar-protein interactions.     

Measurement of chemical exchange between RNA conformers by F NMR

Many noncoding RNA molecules adopt alternative secondary and tertiary conformations that are critical for their roles in gene expression. Although many of these rearrangements are mediated by other biomolecular components, it is important to evaluate the equilibrium relationship of the conformers. To measure the spontaneous interconversion in a bi-stable RNA stem loop sequence into which a single ¹⁹F-uridine label was incorporated, a ¹⁹F–¹⁹F EXSY experiment was employed. The kinetic exchange rate measured from EXSY experiments for this system was 37.3 ± 2.8 s⁻¹. The advantage of this approach is that exchange kinetics can be monitored in any RNA sequence into which a single ¹⁹F nucleotide is incorporated by commercial synthesis. This method is therefore suitable for application to biologically significant systems in which dynamic conformational rearrangement is important for function and may therefore facilitate studies of RNA structure–function relationships.     

Site-specific immobilization of a (His)6-tagged acetylcholinesterase on nickel nanoparticles for highly sensitive toxicity biosensors

This paper reports site-specific affinity immobilization of (His)6-tagged acetylcholinesterase (AChE) onto Ni/NiO nanoparticles for the development of an electrochemical screen-printed biosensor for the detection of organophosphate pesticides. The method is based on the specific affinity binding of the His-tagged enzyme to oxidized nickel nanoparticle surfaces in the absence of metal chelators. This approach allows stable and oriented attachment of the enzyme onto the oxidized nickel through the external His residue in one-step procedure, allowing for fast and sensitive detection of paraoxon in the concentration range from 10⁻⁸ to 10⁻¹³ M. A detection limit of 10⁻¹² M for paraoxon was obtained after 20 min incubation. This method can be used as a generic approach for the immobilization of other His-tagged enzymes for the development of biosensors.     

Multifunctional carbon nanotubes for direct electrochemistry of glucose oxidase and glucose bioassay

Polydopamine (Pdop) has recently been shown to adsorb to a wide variety of surfaces and serves as an adhesion layer to immobilize biological molecules. In this work, the multifunctional carbon nanotube (CNT) composites were prepared though the oxidation of dopamine at room temperature and subsequent electroless silver deposition by mildly stirring. The stable immobilization and direct electron transfer of glucose oxidase were achieved on the composite film modified glassy carbon electrode. The resulting electrode gave a well-defined redox peaks with a formal potential of about −482 mV (vs. SCE) in pH 7.0 buffer. The electron transfer rate constant was estimated to be 3.6 s⁻¹, due to the combined contribution of Pdop, CNTs and Ag nanoparticles with the help of Nafion. Furthermore, the method for detecting of glucose was proposed based on the decrease of oxygen caused by the enzyme-catalyzed reaction between glucose oxidase (GOD) and glucose. The linear response to glucose ranging from 50.0 μM to 1.1 mM (R² = 0.9958), with a calculated detection limit of 17.0 μM at a signal-to-noise ratio of 3. The low calculated apparent Michaelis–Menten constant was 5.46 mM, implying the high enzymatic activity and affinity of immobilized GOD for glucose. It can reasonably be expected that this observation might hold true for other noble metal nanostructure-electroactive protein systems, providing a promising platform for the development of biosensors and biofuel cells.     

Selective binding of imatinib to the genetic variants of human α1-acid glycoprotein

Imatinib is a selective tyrosine kinase inhibitor, successfully used for the treatment of chronic myelogenous leukaemia. Its strong plasma protein binding referred to α₁-acid glycoprotein (AGP) component was found to inhibit the pharmacological activity. AGP shows genetic polymorphism and the two main genetic variants have different drug binding properties. The binding characteristics of imatinib to AGP genetic variants and the possibility of its binding interactions were investigated by various methods. The results proved that binding of imatinib to the two main genetic variants is very different, the high affinity binding belongs dominantly to the F1-S variant. This interaction is accompanied with specific spectral changes (induced circular dichroism, UV change, intrinsic fluorescence quenching), suggesting that the bound ligand has chiral conformation that would largely overlap with other ligands inside the protein cavity. Binding parameters of K_a = 1.7(± 0.2) × 10⁶ M^− 1 and n = 0.94 could be determined for the binding on the F1-S variant at 37°. Imatinib binding on the A variant is weaker and less specific. The binding affinity of imatinib to human serum albumin (nK_a ≈ 3 × 10⁴ M^− 1) is low. Pharmacologically relevant binding interactions with other drugs can be expected on the F1-S variant of AGP.     

Local heating of molecular motors using single carbon nanotubes

Temperature globally affects all chemical processes and biomolecules in living cells. Elevating the temperature of an entire cell accelerates so many biomolecular reactions simultaneously that it is difficult to distinguish the various mechanisms involved. The ability to localize temperature changes to the nanometer range within a cell could provide a powerful new tool for regulating biomolecular activity at the level of individual molecules. The search for a nanoheater for biological research has prompted experiments with carbon nanotubes (CNTs), which have the highest conductivity of any known material. The adsorption of skeletal muscle myosin molecules along the length of single multi-walled CNTs (~10 μm) has allowed researchers to observe the ATP-driven sliding of fluorescently labeled actin filaments. In one study, red-laser irradiation focused on one end of a myosin-coated CNT was used to heat myosin motors locally without directly heating the surrounding water; this laser irradiation instantly accelerated the actin-filament sliding speeds from ~6 to ~12 μm/s in a reversible manner, indicating a local, real-time heating of myosin motors by approximately Δ12 K. Calculation of heat transfer using the finite element method, based on the estimated temperature along a single CNT with a diameter of 170 nm, indicated a high thermal conductivity of ~1540 Wm^?1K^?1 in solution, consistent with values measured in vacuum in earlier studies. Temperature distribution indicated by half-decrease distances was ~3660 nm along the length of the CNT and ~250 nm perpendicular to the length. These results suggest that single-CNT-based heating at the nanometer- or micrometer-range could be used to regulate various biomolecules in many areas of biological, physical, and chemical research.     

Carbon nanotubes in blends of polycaprolactone/thermoplastic starch

Despite the importance of polymer–polymer multiphase systems, very little work has been carried out on the preferred localization of solid inclusions in such multiphase systems. In this work, carbon nanotubes (CNT) are dispersed with polycaprolactone (PCL) and thermoplastic starch (TPS) at several CNT contents via a combined solution/twin-screw extrusion melt mixing method. A PCL/CNT masterbatch was first prepared and then blended with 20 wt% TPS. Transmission and scanning electron microscopy images reveal a CNT localization principally in the TPS phase and partly at the PCL/TPS interface, with no further change by annealing. This indicates a strong driving force for the CNTs toward TPS. Young's model predicts that the nanotubes should be located at the interface. X-ray photoelectron spectroscopy (XPS) of extracted CNTs quantitatively confirms an encapsulation by TPS and reveals a covalent bonding of CNTs with thermoplastic starch. It appears likely that the nanotubes migrate to the interface, react with TPS and then are subsequently drawn into the low viscosity TPS phase. In a low shear rate/low shear stress internal mixer the nanotubes are found both in the PCL phase and at the PCL/TPS interface and have not completed the transit to the TPS phase. This latter result indicates the importance of choosing appropriate processing conditions in order to minimize kinetic effects. The addition of CNTs to PCL results in an increase in the crystallization temperature and a decrease in the percent crystallinity confirming the heterogeneous nucleating effect of the nanotubes. Finally, DMA analysis reveals a dramatic decrease in the starch rich phase transition temperature (∼26 °C), for the system with nanotubes located in the TPS phase.