Aptamer biosensor for protein detection using gold nanoparticles

Combining gold nanoparticles (GNPs) as fluorescence quencher and aptamer as probe, we have developed protein biosensors by using DNA-modified GNPs. We examined how the experimental design, such as the type of interaction between DNA strands and GNPs, temperature, and microenvironment of aptamer, influences the recognition ability of the biosensor. Under our experimental conditions, the recognition of protein by the complex of dye-labeled DNA hybridized with aptamer that is immobilized on GNPs (Ap-Im-GNPs) shows the best character in protein detection.     

Label-free and sensitive faradic impedance aptasensor for the determination of lysozyme based on target-induced aptamer displacement

A label-free and sensitive faradic impedance spectroscopy (FIS) aptasensor based on target-induced aptamer displacement was developed for the determination of lysozyme as a model system. The aptasensor was fabricated by self-assembling the partial complementary single strand DNA (pcDNA)–lysozyme binding aptamer (LBA) duplex on the surface of a gold electrode. To measure lysozyme, the change in interfacial electron transfer resistance of the aptasensor using a redox couple of [Fe(CN)₆]^3−/4− as the probe was monitored. The introduction of target lysozyme induced the displacement of the LBA from the pcDNA–LBA duplex on the electrode into the solution, decreasing the electron transfer resistance of the aptasensor. The decrease in the FIS signal is linear with the concentration of lysozyme in the range from 0.2 nM to 4.0 nM, with a detection limit of 0.07 nM. The fabricated aptasensor shows a high sensitivity, good selectivity and satisfactory regeneration. This work demonstrates that a high sensitivity of the fabricated aptasensor can be obtained using a relatively short pcDNA. This work also demonstrates that the target-induced aptamer displacement strategy is promising in the design of an electrochemical aptasensor for the determination of lysozyme with good selectivity and high sensitivity.     

Colorimetric determination of urinary adenosine using aptamer-modified gold nanoparticles

This paper describes a colorimetric sensing approach for the determination of adenosine triphosphate (ATP) using aptamer-modified gold nanoparticles (Apt-Au NPs). In the absence of the analytes, the color of the Apt-Au NPs solution changed from wine-red to purple as a result of salt-induced aggregation. Binding of the analytes to the Apt-Au NPs induced folding of the aptamers on the Au NP surfaces into four-stranded tetraplex structures (G-quartet) and/or an increase in charge density. As a result, the Apt-Au NPs solution was wine-red in color in the presence of the analytes under high salt conditions. For mixtures of ATP (20.0–100.0 nM), Apt-Au NPs (3.0 nM), 10.0% poly(ethylene glycol), 0.2 μM TOTO-3, 150.0 mM NaCl, 15.0 mM KCl, and 16.0 mM Tris–HCl (pH 7.4), a linear correlation (R² = 0.99) existed between the ratio of the extinctions of the Apt-Au NPs at 650 and 520 nm (Ex_650/520) and the concentration of ATP. The limit of detection for ATP was 10.0 nM. The practicality of this simple, sensitive, specific, and cost-effective approach was demonstrated through the determination of the concentration of adenosine in urine samples.     

A universal fluorescent aptasensor based on AccuBlue dye for the detection of pathogenic bacteria

We report a universal fluorescent aptasensor based on the AccuBlue dye, which is impermeant to cell membranes, for the detection of pathogenic bacteria. The sensor consists of AccuBlue, an aptamer strand, and its complementary strand (cDNA) that partially hybridizes to the aptamer strand. We have fabricated two models by changing the sequence of the reaction between the elements in the system. One is the “signal on” model in which the aptamer is first bound to the target, followed by the addition of cDNA and AccuBlue, at which time the cDNA hybridizes with the free unreacted aptamer and forms a double-stranded DNA (dsDNA) duplex. Such hybridization causes AccuBlue to insert into the dsDNA and exhibit significantly increased fluorescence intensity because of the specific intercalation of the AccuBlue into dsDNA rather than single-stranded DNA (ssDNA). The other model, “signal off,” involves hybridization of the aptamer with cDNA first, resulting in high fluorescence intensity on the addition of AccuBlue. When the target is added, the aptamer binds the target, causing the cDNA to detach from the dsDNA duplex and resulting in low fluorescence as a result of the liberation of AccuBlue. Because this design is based purely on DNA hybridization, and AccuBlue is impermeant to cell membranes, it could potentially be adapted to a wide variety of analytes.     

A chronocoulometric aptasensor based on gold nanoparticles as a signal amplification strategy for detection of thrombin

A sensitive chronocoulometric aptasensor for the detection of thrombin has been developed based on gold nanoparticle amplification. The functional gold nanoparticles, loaded with link DNA (LDNA) and report DNA (RDNA), were immobilized on an electrode by thrombin aptamers performing as a recognition element and capture probe. LDNA was complementary to the thrombin aptamers and RDNA was noncomplementary, but could combine with [Ru(NH₃)₆]³⁺ (RuHex) cations. Electrochemical signals obtained by RuHex that bound quantitatively to the negatively charged phosphate backbone of DNA via electrostatic interactions were measured by chronocoulometry. In the presence of thrombin, the combination of thrombin and thrombin aptamers and the release of the functional gold nanoparticles could induce a significant decrease in chronocoulometric signal. The incorporation of gold nanoparticles in the chronocoulometric aptasensor significantly enhanced the sensitivity. The performance of the aptasensor was further increased by the optimization of the surface density of aptamers. Under optimum conditions, the chronocoulometric aptasensor exhibited a wide linear response range of 0.1–18.5 nM with a detection limit of 30 pM. The results demonstrated that this nanoparticle-based amplification strategy offers a simple and effective approach to detect thrombin.     

Amplified electrochemical aptasensor for thrombin based on bio-barcode method

In the present study, an electrochemical aptasensor for highly sensitive detection of thrombin was developed based on bio-barcode amplification assay. For this proposed aptasensor, capture DNA aptamerI was immobilized on the Au electrode. The functional Au nanoparticles (DNA–AuNPs) are loaded with barcode binding DNA and aptamerII. Through the specific recognition for thrombin, a sandwich format of Au/aptamerI/thrombin/DNA–AuNPs was fabricated. After hybridization with the PbSNPs-labeled barcode DNA, the assembled sensor was obtained. The concentration of thrombin was monitored based on the concentration of lead ions dissolved through differential pulse anodic stripping voltammetric (DPASV). Under optimum conditions, a detection limit of 6.2 × 10⁻¹⁵ mol L⁻¹ (M) thrombin was achieved. In addition, the sensor exhibited excellent selectivity against other proteins.     

Colorimetric enzymatic activity assay based on noncrosslinking aggregation of gold nanoparticles induced by adsorption of substrate peptides

The mechanisms of colorimetric assays based on aggregation of gold nanoparticles (GNPs) have been separated into two categories, crosslinking, and noncrosslinking aggregation. The noncrosslinking aggregation has recently been emerging as a simple and rapid mechanism and has been applied to enzymatic activity assays and DNA detection. We report here the detailed study of an enzymatic activity assay for protein kinases based on noncrosslinking aggregation. The principle of the assay is to detect kinase activity by utilizing the difference of coagulating ability of a cationic substrate peptide and its phosphorylated form toward GNPs with anionic surface charge. The critical coagulation concentrations (CCCs) of the peptides were about 10(3) times lower than those of the metal cations with the same cationic charges. The multivalent coordination bonds of the functional groups of the peptides with the GNP surface will strongly support the adsorption of the peptide on the GNP surface. The effect of the GNP size (10, 20, 40, 60 nm) on the dynamic range of OD before and after aggregation was studied. The dynamic range became a maximum for 20 nm GNP among those studied. The difference of CCC between the phosphorylated and nonphosphorylated peptides was governed by (1) the ratio between the peptide concentration and the surface area concentration of GNP and (2) the net charge of the peptides. When the assay system was applied to the activity assessment of protein kinase A, the dynamic range of OD was largest for 20 nm GNPs. However, when the peptide concentration was lowered, the largest 60 nm GNP was advantageous because of its smaller specific surface area.     

Colorimetric detection of bisphenol A based on unmodified aptamer and cationic polymer aggregated gold nanoparticles

In this study, a colorimetric method was exploited to detect bisphenol A (BPA) based on BPA-specific aptamer and cationic polymer-induced aggregation of gold nanoparticles (AuNPs). The principle of this assay is very classical. The aggregation of AuNPs was induced by the concentration of cationic polymer, which is controlled by specific recognition of aptamer with BPA and the reaction of aptamer and cationic polymer forming “duplex” structure. This method enables colorimetric detection of BPA with selectivity and a detection limit of 1.50 nM. In addition, this colorimetric method was successfully used to determine spiked BPA in tap water and river water samples.     

Aptamer biosensor for label-free square-wave voltammetry detection of angiogenin

Angiogenin (Ang), one of the most potent angiogenic factor, is related with the growth and metastasis of numerous tumors. This paper presents a very simple and label-free square-wave voltammetry (SWV) aptasensor to detect angiogenin, in which an anti-angiogenin-aptamer was used as a molecular recognition element, and the couple ferro/ferricyanide as a redox probe. At the bare gold electrode, the redox couple (K₄[Fe(CN)₆]/K₃[Fe(CN)₆]) can be very easily accessed to the electrode surface to give a very strong SWV signal. At the anti-angiogenin/Au electrode surface, when angiogenin was added to the electrochemical cell, the binding of the analyte results in less availability for a redox reaction, which led to smaller SWV current. To quantify the amount of angiogenin, current suppressions of SWV peak were monitored using the redox couple of an [Fe(CN)₆]^4−/3− probe. The plot of signal suppression against the logarithm of angiogenin concentration is linear with over the range from 0.01 nM to 30 nM with a detection limit of 1 pM. The aptasensor also showed very good selectivity for angiogenin without being affected by the presence of other proteins in serum. It is the first time to use a very simple method to detect the cancer marker. Such an aptasensor opens a rapid, selective and sensitive route for angiogenin detection and provides a promising strategy for other protein detections.     

Colorimetric detection of melamine in milk by citrate-stabilized gold nanoparticles

Here, we report a simple and sensitive colorimetric method for detection of melamine in milk using gold nanoparticles (AuNPs). AuNPs of 21-nm size were synthesized by the citrate reduction method. The method is based on the principle that the melamine causes the aggregation of AuNPs and, hence, the wine red color of AuNPs changes to blue or purple. This change in color can be visualized with the naked eye or an ultraviolet–visible (UV–Vis) spectrometer. Under optimized conditions, AuNPs are highly specific for melamine and can detect melamine down to a concentration of 0.05 mg L⁻¹.     

细菌内毒素电化学生物传感器的构建及性能表征

细菌内毒素为外源性致热源,内毒素的检测在生物制品生产过程中至关重要。构建了一种用于检测细菌内毒素的电化学核酸适体生物传感器,以氨基修饰的内毒素核酸适体EAQ2为配体,通过3-巯基丙酸(MPA)中间连接物,固定修饰在金电极表面,并通过循环伏安(CV)和电化学交流阻抗谱(EIS)两种方式共同表征了生物传感器的构建过程。结果发现MPA组装时间在6 h时能在金电极表面形成稳定的自组装单分子层。构建的生物传感器检测限达0.001 EU/ml,低于目前报道的其他内毒素检测方法的检测限,在0.001~0.1 EU/ml内毒素浓度范围内具有较好的线性关系,相关系数R~2=0.9878,在实际生物样品的检测上具有一定的应用前景。     

Upconversion luminescence resonance energy transfer-based aptasensor for the sensitive detection of oxytetracycline

In this work, a biosensor based on luminescence resonance energy transfer (LRET) from NaYF₄:Yb,Tm upconversion nanoparticles (UCNPs) to SYBR Green I has been developed. The aptamers are covalently linked to UCNPs and hybridized with their complementary strands. The subsequent addition of SYBR Green allows SYBR Green I to insert into the formed double-stranded DNA (dsDNA) duplex and brings the energy donor and acceptor into close proximity, leading to the fluorescence of UCNPs transferred to SYBR Green I. When excited at 980 nm, the UCNPs emit luminescence at 477 nm, and this energy is transferred to SYBR Green I, which emits luminescence at 530 nm. In the presence of oxytetracycline (OTC), the aptamers prefer to bind to its corresponding analyte and dehybridize with the complementary DNA. This dehybridization leads to the liberation of SYBR Green I, which distances SYBR Green I from the UCNPs and recovers the UCNPs' luminescence. Under optimal conditions, a linear calibration is obtained between the ratio of I₅₃₀ to I₄₇₇ nm (I₅₃₀/I₄₇₇) and the OTC concentration, which ranges from 0.1 to 10 ng/ml with a limit of detection (LOD) of 0.054 ng/ml.     

Selective photothermal efficiency of citrate capped gold nanoparticles for destruction of cancer cells

Gold nanoparticles are recently having much attention because of their increased applications in biomedical fields. In this paper, we demonstrated the photothermal efficacy of citrate capped gold nanoparticles (AuNPs) for the destruction of A431 cancer cells. Citrate capped AuNPs were synthesized successfully and characterized by UV–visible–NIR spectrophotometry and High Resolution Transmission Electron Microscopy (HR-TEM). Further, AuNPs were conjugated with epidermal growth factor receptor antibody (anti-EGFR) and applied for the selective photothermal therapy (PTT) of human epithelial cancer cells, A431. PTT experiments were conducted in four groups, Group I—control cells, Group II—cells treated with laser light alone, Group III—cells treated with unconjugated AuNP and further laser irradiation and Group IV—anti-EGFR conjugated AuNP treated cells irradiated by laser light. After laser irradiation, cell morphology changes that were examined using phase contrast microscopy along with the relevant biochemical parameters like lactate dehydrogenase activity, reactive oxygen species generation and caspase-3 activity were studied for all the groups to determine whether cell death occurs due to necrosis or apoptosis. From these results we concluded that, these immunotargeted nanoparticles could selectively induce cell death via ROS mediated apoptosis when cells were exposed to a low power laser light.     

Quantum dots electrochemical aptasensor based on three-dimensionally ordered macroporous gold film for the detection of ATP

A sensitive electrochemical aptasensor was successfully fabricated for the detection of adenosine triphosphate (ATP) by combining three-dimensionally ordered macroporous (3DOM) gold film and quantum dots (QDs). The 3DOM gold film was electrochemically fabricated with an inverted opal template, making the active surface area of the electrode up to 9.52 times larger than that of a classical bare flat one. 5′-thiolated ATP-binding aptamer (ABA) was first assembled onto the 3DOM gold film via sulfur–gold affinity. Then, 5′-biotinated complementary strand (BCS) was immobilized via hybridization reaction to form the DNA/DNA duplex. Since the tertiary structure of the aptamer was stabilized in the presence of target ATP, the duplex can be denatured to liberate BCS. The reaction was monitored by electrochemical stripping analysis of dissolved QDs which were bound to the residual BCS through biotin-streptavidin system. The decrease of peak current was proportional to the amount of ATP. The unique interconnected structure in 3DOM gold film along with the "built-in" preconcentration remarkably improved the sensitivity. ATP detection with high selectivity, wide linear dynamic range of 4 orders of magnitude and high sensitivity down to 0.01 nm were achieved. The results demonstrated that the novel strategy was feasible for sensitive ATP assay and provided a promising model for the detection of small molecules.     

A label-free electrochemiluminescence aptasensor for thrombin based on novel assembly strategy of oligonucleotide and luminol functionalized gold nanoparticles

In the work, a label-free electrochemiluminescence (ECL) aptasensor for the sensitive and selective detection of thrombin was constructed based on target-induced direct ECL signal change by virtue of a novel assembly strategy of oligonucleotide and luminol functionalized gold nanoparticles (luminol-AuNPs). It is the first label-free ECL biosensor based on luminol and its analogs functionalized AuNPs. Streptavidin AuNPs coated with biotinylated DNA capture probe 1 (AuNPs-probe 1) were firstly assembled onto an gold electrode through 1,3-propanedithiol. Then luminol-AuNPs co-loaded with thiolated DNA capture probe 2 and thiolated thrombin binding aptamer (TBA) (luminol-AuNPs-probe 2/TBA) were assembled onto AuNPs-probe 1 modified electrode through the hybridization between capture probes 1 and 2. The luminol-AuNPs-probe 2/TBA acted as both molecule recognition probe and sensing interface. An Au/AuNPs/ds-DNA/luminol-AuNPs/TBA multilayer architecture was obtained. In the presence of target thrombin, TBA on the luminol-AuNPs could capture the thrombin onto the electrode surface, which produced a barrier for electro-transfer and influenced the electro-oxidation reaction of luminol, leading to a decrease in ECL intensity. The change of ECL intensity indirectly reflected the concentration of thrombin. Thus, the approach showed a high sensitivity and a wider linearity for the detection of thrombin in the range of 0.005-50nM with a detection limit of 1.7pM. This work reveals that luminol-AuNPs are ideal platform for label-free ECL bioassays.     

Glucose biosensor based on glucose oxidase immobilized at gold nanoparticles decorated graphene-carbon nanotubes

Biopolymer pectin stabilized gold nanoparticles were prepared at graphene and multiwalled carbon nanotubes (GR-MWNTs/AuNPs) and employed for the determination of glucose. The formation of GR-MWNTs/AuNPs was confirmed by scanning electron microscopy, X-ray diffraction, UV–vis and FTIR spectroscopy methods. Glucose oxidase (GOx) was successfully immobilized on GR-MWNTs/AuNPs film and direct electron transfer of GOx was investigated. GOx exhibits highly enhanced redox peaks with formal potential of −0.40 V (vs. Ag/AgCl). The amount of electroactive GOx and electron transfer rate constant were found to be 10.5 × 10⁻¹⁰ mol cm⁻² and 3.36 s⁻¹, respectively, which were significantly larger than the previous reports. The fabricated amperometric glucose biosensor sensitively detects glucose and showed two linear ranges: (1) 10 μM – 2 mM with LOD of 4.1 μM, (2) 2 mM – 5.2 mM with LOD of 0.95 mM. The comparison of the biosensor performance with reported sensors reveals the significant improvement in overall sensor performance. Moreover, the biosensor exhibited appreciable stability, repeatability, reproducibility and practicality. The other advantages of the fabricated biosensor are simple and green fabrication approach, roughed and stable electrode surface, fast in sensing and highly reproducible.     

A multi-amplification aptasensor for highly sensitive detection of thrombin based on high-quality hollow CoPt nanoparticles decorated graphene

In this work, we have successfully demonstrated a facile strategy to incorporate high-quality hollow CoPt bimetal alloy nanoparticles (HCoPt) onto reduced graphene oxide sheet (HCoPt-RGs). An advanced sandwich-type electrochemical aptasensor for thrombin was proposed by using the HCoPt-RGs conjugates as secondary label. The formed conjugates provided large surface area for loading plentiful redox probe thionine (Thi), horseradish peroxidase (HRP) and secondary aptamer (Apt II) with good stability and friendly biocompatibility, indicating their superior properties in electroactive mediator enrichment and biomolecule immobilization. Furthermore, activated by glutaraldehyde (GA), the chitosan-hollow CoPt alloy nanoparticle (CS-HCoPt) film can greatly facilitate the capture of primary aptamer (Apt I) and dramatically reduce the nonspecific binding. Excellent sensitivity was obtained by detecting the conspicuously enhanced electrochemical signal of Thi, which was amplified by HCoPt alloy nanoparticles and HRP toward the catalytic reduction of H₂O₂. The aptasensor displayed excellent performance for thrombin with a wide linearity in the range from 1.0 × 10⁻¹² to 5.0 × 10⁻⁸ M and a relatively low detection limit of 3.4 × 10⁻¹³ M. Moreover, the resulted aptasensor also exhibited good specificity, acceptable reproducibility and stability, indicating that the present strategy could pave a promising way for the wide application of graphene in clinical research.     

RNA aptazyme-tethered large gold nanoparticles for on-the-spot sensing of the aptazyme ligand

A single-step sensing system was developed to visually detect ligands of a cleavase-like RNA aptazyme at room temperature using aptazyme-tethered gold nanoparticles, the electrosteric stability of which was adjusted by increasing their diameter. In this system, the ligand induces self-cleavage of the aptazyme on gold nanoparticles to decrease the electrosteric stability of the gold nanoparticles, which causes them to visibly aggregate. In comparison to a previous multi-step system using aptazymes and gold nanoparticles separately, the present system requires only single handling and no special equipment, making it more suitable for on-the-spot sensing.     

Development of acetylcholinesterase biosensor based on CdTe quantum dots/gold nanoparticles modified chitosan microspheres interface

In this paper, a novel acetylcholinesterase (AChE) biosensor was constructed by modifying glassy carbon electrode with CdTe quantum dots (QDs) and excellent conductive gold nanoparticles (GNPs) though chitosan microspheres to immobilize AChE. Since GNPs have shown widespread use particularly for constructing electrochemical biosensors through their high electron-transfer ability, the combined AChE exhibited high affinity to its substrate and thus a sensitive, fast and cheap method for determination of monocrotophos. The combination of CdTe QDs and GNPs promoted electron transfer and catalyzed the electro-oxidation of thiocholine, thus amplifying the detection sensitivity. This novel biosensing platform based on CdTe QDs-GNPs composite responded even more sensitively than that on CdTe QDs or GNPs alone because of the presence of synergistic effects in CdTe-GNPs film. The inhibition of monocrotophos was proportional to its concentration in two ranges, from 1 to 1000ngmL(-1) and from 2 to 15mugmL(-1), with a detection limit of 0.3ngmL(-1). The proposed biosensor showed good precision and reproducibility, acceptable stability and accuracy in garlic samples analysis.