Glucose biosensor based on the room-temperature phosphorescence of TiO2/SiO2 nanocomposite

The direct immobilization of glucose oxidase (GOD) on TiO₂/SiO₂ nanocomposite and its application as glucose biosensor were investigated. The room-temperature phosphorescence of TiO₂/SiO₂ nanocomposite can be quenched by hydrogen peroxide (H₂O₂). The detection of glucose may be accomplished by monitoring the formation of hydrogen peroxide which generated in the oxidation process of glucose with the catalysis of GOD. To our surprise, by using a 96-hole polyporous plate accessory of fluorescence spectrophotometer, the biosensor exhibits excellent linear response to glucose concentrations ranging from 1.0 × 10⁻⁹ to 1.0 × 10⁻² M with a detection limit of 1.2 × 10⁻¹⁰ M. The TiO₂/SiO₂ nanocomposite can be used as both supporting material and signal transducer. The phosphorescence intensity and color of the biosensor change obviously and even could be observed with naked eyes by continuous addition of glucose. Based on the room-temperature phosphorescence of TiO₂/SiO₂ nanocomposite, a new method of solid substrate-room-temperature phosphorimetry (SS-RTP) for glucose determination is proposed. A glucose biosensor was fabricated with wide determination concentration range, low detection limit, high sensitivity, and fast response time. And the biosensor has been successfully applied to the determination of glucose in human blood serum. The coacervation of GOD enzyme and its interaction with TiO₂/SiO₂ nanocomposite enlarge the surface area and enhance the chemical stability of GOD. The nice biocompatibility, large surface area, good chemical stability and nontoxicity of the TiO₂/SiO₂ nanocomposite have made this material suitable for functioning as biosensor.     

Thermochemotherapy effect of nanosized As2O3/Fe3O4 complex on experimental mouse tumors and its influence on the expression of CD44v6, VEGF-C and MMP-9

Background  

Both thermotherapy and arsenic have been shown to be active against a broad spectrum of cancers. To reduce the limitations of conventional thermotherapy, improve therapeutic anticancer activity, reduce the toxicity of arsenic on normal tissue, and increase tissue-specific delivery, we prepared a nanosized As₂O₃/Fe₃O₄ complex (Fe₃O₄ magnetic nanoparticles encapsulated in As₂O₃). We assessed the thermodynamic characteristics of this complex and validated the hyperthermia effect, when combined with magnetic fluid hyperthermia (MFH), on xenograft HeLa cells (human cervical cancer cell line) in nude mice. We also measured the effect on the expression of CD44v6, VEGF-C, and MMP-9 which were related to cancer and/or metastasis.     

Study of the magnetic properties of the mixed oxide Fe2O3-Fe2(MoO4)3 in the temperature range 2-300 K with different compositions

Powdered Fe₂O₃-Fe₂(MoO₄)₃ with different amounts of iron and molybdate precursors was prepared by a solvothermal route, followed by a supercritical drying and oxidation at 500 °C. The possibility to arrange Fe or Mo precursors in excess into a methanol solution makes one accessible to the preparation of iron(III) molybdate samples with different composition. The structural parameters and relationship between different phases in the composition are obtained from Rietveld profile refinement. Our intention was to modify the magnetic properties of Fe₂(MoO₄)₃ by adding the crystalline phase of Fe₂O₃, which carries a Fe-O magnetic component. A possible contribution to the magnetization and the magnetic susceptibility by this magnetic component is analyzed in the temperature range 2-300 K. The observed higher magnetic susceptibilities are compared to those reported.     

Synthesis, crystal structures, electrochemical and magnetic properties of polynuclear {Fe4} and {Fe8Na4} carboxylate/picolinate clusters

Reaction of sodium picolinate with Fe^III oxo-centered carboxylate triangles in MeCN in the presence of PPh₄Cl yields (PPh₄)[Fe₄O₂(O₂CR)₇(pic)₂] (R = Ph (1), Bu^t (2)). Omitting the phosphonium cation produces [Fe₈Na₄O₄(O₂CPh)₁₆(pic)₄(H₂O)₄] (3), which contains two Fe₄Na₂ units bridged by two picolinate ligands. X-ray crystal structures of 1 and 3 are reported.Voltammetric profiles in MeCN show four one-electron reduction steps for complexes 1 and 2. Variable-temperature magnetic susceptibility measurements in polycrystalline samples of 1 and 3 reveal strong antiferromagnetic couplings leading to S = 0 ground states.     

A new example of a tetranuclear iron(III) cluster containing the [Fe4O2] core: preparation, X-ray crystal structure, magnetochemistry and Mössbauer study of [Fe4O2(O2CMe)6(N3)2(phen)2]

Two synthetic procedures have been employed that allow access to the new tetranuclear cluster [Fe₄O₂(O₂CMe)₆(N₃)₂(phen)₂] (1), where phen is 1,10-phenanthroline. Complex 1 · 3MeCN displays an unusual structural asymmetry (observed for the second time) in its [Fe₄O₂]⁸⁺ core that can be considered as a hybrid of the bent (butterfly) and planar dispositions of four metal ions seen previously in such compounds with transition metals. Complex 1 has been characterized by variable-temperature magnetic susceptibility studies, and by IR and variable-temperature ⁵⁷Fe Mössbauer spectroscopies. Magnetochemical data reveal a diamagnetic ground state (S=0) with antiferromagnetic body-body and body-wingtip interactions between the iron(III) ions of the butterfly core (J_bb=−11 cm⁻¹, J_wb=−70 cm⁻¹). Magnetochemical and Mössbauer studies on 1 show that its structural asymmetry has practically no influence on these properties compared with the more symmetric types.     

Optimum conditions for lipase immobilization on chitosan-coated Fe3O4 nanoparticles

Magnetic Fe₃O₄-chitosan nanoparticles are prepared by the coagulation of an aqueous solution of chitosan with Fe₃O₄ nanoparticles. The characterization of Fe₃O₄-chitosan is analyzed by FTIR, FESEM, and SQUID magnetometry. The Fe₃O₄-chitosan nanoparticles are used for the covalent immobilization of lipase from Candida rugosa using N-(3-dimethylaminopropyl)-N′-ethylcarbodiimide (EDC) and N-hydroxysuccinimide (NHS) as coupling agents. The response surface methodology (RSM) was employed to search the optimal immobilization conditions and understand the significance of the factors affecting the immobilized lipase activity. Based on the ridge max analysis, the optimum immobilization conditions were immobilization time 2.14 h, pH 6.37, and enzyme/support ratio 0.73 (w/w); the highest activity obtained was 20 U/g Fe₃O₄-chitosan. After twenty repeated uses, the immobilized lipase retains over 83% of its original activity. The immobilized lipase shows better operational stability, including wider thermal and pH ranges, and remains stable after 13 days of storage at 25 °C.     

A highly sensitive detection of chloramphenicol based on chemiluminescence immunoassays with the cheap functionalized Fe3O4@SiO2 magnetic nanoparticles

A strategy has been applied to chloramphenicol (CAP) detection with chemiluminescence immunoassays (CLIA) based on cheap functionalized Fe₃O₄@SiO₂ magnetic nanoparticles (Fe–MNPs). The strategy that bovine serum albumin (BSA) was immobilized on cheap functionalized Fe–MNPs and that the CAP molecules were then immobilized on BSA, avoided the long process of dialysis for preparation of the BSA‐CAP conjugates. The samples were detected for both methods that utilized two different kinds of functionalized Fe–MNPs (amine‐functionalized Fe₃O₄@SiO₂ and carboxylic acid‐functionalized Fe₃O₄@SiO₂). The sensitivities and limits of detection (LODs) of the two methods were obtained and compared based on inhibition curves. The 50% inhibition concentrations (IC₅₀) values of the two methods were about 0.024 ng ml^?1 and 0.046 ng ml^?1 respectively and LODs were approximately 0.0002 ng ml^?1 and 0.001 ng ml^?1 respectively. These methods were much more sensitive than that of any traditional enzyme‐linked immunosorbent assay (ELISA) previously reported. Therefore, such chemiluminescence methods could be easily adapted for small molecule detection in a variety of foods using Fe–MNPs.     

Preparation, crystal structure and magnetic property of a binuclear oxalate-bridged iron(III) compound: Fe2(C2O4)Cl4(DMF)4 (DMF = dimethylformamide)

An oxalato-bridged binuclear iron(III) compound, Fe₂(C₂O₄)Cl₄(DMF)₄ (DMF = dimethylformamide), was obtained by electrocrystallization for three weeks at 3.4 V and it displays a strong antiferromagnetic interaction of J = −6.74(4) cm⁻¹.     

Preparation and characterization of amino and carboxyl functionalized core-shell Fe3O4/SiO2 for L-asparaginase immobilization: A comparison study

Abstract

Magnetic nanoparticles are well known as facile and effective support for enzyme immobilization since they have a high surface area, large surface-to-volume ratio, easy separation, a fast and high enzyme loading. This study aims to provide insights on whether acidic or basic modified particles are more effective for L-asparaginase (ASNase) immobilization. Therefore, amino (Fe₃O₄/SiO₂/NH₂) and carboxyl-functionalized (Fe₃O₄/SiO₂/COOH) particles were prepared. The functional groups, crystalline structure, magnetic properties, morphology, chemical composition and thermal behaviour of the prepared modified nanoparticles were examined via Fourier-transform infra-red spectroscopy (FTIR), X-ray diffraction (XRD), vibrating-sample magnetometer (VSM), scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDAX). Under the optimum conditions, the immobilized enzymes were more stable within a certain range of temperatures and pH values in comparison to free enzyme. On the other hand, the immobilized enzymes showed greater stability after incubation for 3?h at 50?°C. The free enzyme maintained only 30% of its initial activity for 4?weeks at 4?°C, while Fe₃O₄/SiO₂/NH₂/ASNase and Fe₃O₄/SiO₂/COOH/ASNase retained more than 78.9% and 56.5% of initial activities under the same conditions, respectively. Moreover, Fe₃O₄/SiO₂/NH₂/ASNase (77.2%) and Fe₃O₄/SiO₂/COOH/ASNase (57.4%) displayed excellent operational stability after 17 repeated cycles. These findings suggested that the Fe₃O₄/SiO₂/NH₂ and Fe₃O₄/SiO₂/COOH may be utilized as efficient and sustainable supports to developed immobilized ASNase in several biotechnological applications.     

DNA binding and cytotoxicity studies of magnetic nanofluid containing antiviral drug oseltamivir

In this work, the possibility of preparing a nanoparticle with improved treatment properties was investigated. In this regard, synthesis, characterization, in vitro cytotoxicity and DNA binding of Fe₃O₄@oleate/oseltamivir magnetic nanoparticles (MNPs) were investigated. Fe₃O₄ nanoparticles were synthesized via chemical co-precipitation and coated by oleate bilayers. Then, Fe₃O₄@OA MNPs were functionalized with an antiviral drug (oseltamivir), for better biological applications. The MNPs were subsequently characterized by zeta sizer and Zeta potential measurements, Fourier transform infrared (FT-IR) spectroscopy, vibrating sample magnetometer (VSM) and transmission electron microscopy (TEM) analyses. The TEM image demonstrated that average sizes of Fe₃O₄@OA/oseltamivir MNPs were about 8?nm. The in vitro cytotoxicity of Fe₃O₄@OA/oseltamivir MNPs was studied against cancer cell lines (MCF-7 and MDA-MB-231) and compared with oseltamivir drug. The results illustrated that Fe₃O₄@OA/oseltamivir magnetic nanoparticles have better antiproliferative effects on the mentioned cell lines as compared with oseltamivir. Also, in vitro DNA binding studies were done by UV–Vis, circular dichroism, and Fluorescence spectroscopy. The results indicated that Fe₃O₄@OA/oseltamivir MNPs bound to DNA via groove binding. Moreover, this magnetic nanofluid has potential for magnetic hyperthermia therapy due to magnetic core of its nanoparticles.

Communicated by Ramaswamy H. Sarma     

Hydrothermal synthesis and structure of [Ni(tpyrpyz)2]2[Mo4O12F2][Mo6O19] · 2H2O, a material exhibiting an unusual tetranuclear polyoxofluoromolybdate cluster [Mo4O12F2]

The hydrothermal reaction of a solution of Ni(CH₃CO₂)₂ · 4H₂O, MoO₃, tetra-4-pyridylpyrazine, H₂O₃PCH₃, and HF at 200 °C for 96 h yields orange crystals of [Ni(tpyrpyz)₂]₂[Mo₄O₁₂F₂][Mo₆O₁₇] · 2H₂O (1 · 2H₂O). The structure consists of discrete {Ni(tpyrpyz)₂}²⁺ cations and {Mo₆O₁₉}²⁻ and {Mo₄O₁₂F₂}²⁻ anionic clusters. The hexamolybdate is the well-documented octahedron of octahedra, that is, six {MoO₆} octahedra in a compact edge-sharing arrangement. The novel oxyfluoride cluster {Mo₄O₁₂F₂}²⁻ features two {MoO₄F₂} octahedra, sharing the edge defined by the fluoride ligands; the octahedral Mo sites corner-share to two {MoO₄} tetrahedra in the μ₂-O, O^′ bridging mode.     

Double-Layer Magnetic Nanoparticle-Embedded Silica Particles for Efficient Bio-Separation

Superparamagnetic Fe₃O₄ nanoparticles (NPs) based nanomaterials have been exploited in various biotechnology fields including biomolecule separation. However, slow accumulation of Fe₃O₄ NPs by magnets may limit broad applications of Fe₃O₄ NP-based nanomaterials. In this study, we report fabrication of Fe₃O₄ NPs double-layered silica nanoparticles (DL MNPs) with a silica core and highly packed Fe₃O₄ NPs layers. The DL MNPs had a superparamagnetic property and efficient accumulation kinetics under an external magnetic field. Moreover, the magnetic field-exposed DL MNPs show quantitative accumulation, whereas Fe₃O₄ NPs single-layered silica nanoparticles (SL MNPs) and silica-coated Fe₃O₄ NPs produced a saturated plateau under full recovery of the NPs. DL MNPs are promising nanomaterials with great potential to separate and analyze biomolecules.     

Supramolecular salts containing the anionic [Ge(C2O4)3] complex and heteroaromatic amines

The crystalline compounds (Hbipy)₂[Ge(C₂O₄)₃] (1) and (Hphen)₂[Ge(C₂O₄)₃] · 2(H₂O) (2) [Hbipy⁺ is the 2,2′-bipyridinium cation (C₁₀H₉N₂), and Hphen⁺ is the 1,10′-phenathrolinium cation (C₁₂H₉N₂)] were isolated from mild hydrothermal syntheses and their structures were elucidated from single-crystal X-ray diffraction. The two compounds were further characterised by vibrational spectroscopy (FT-IR and FT-Raman), thermogravimetric analysis (TGA) and CHN elemental composition. Compounds 1 and 2 comprise the tris(oxalato-O,O′)germanate dianion complex, [Ge(C₂O₄)₃]²⁻, which co-crystallises with Hbipy⁺ (in 1), or Hphen⁺ and water molecules (in 2). In 1, the germanium oxalate anionic complex, [Ge(C₂O₄)₃]²⁻, and the Hbipy⁺ organic residues interact mutually via N-H?O hydrogen bonding interactions, leading to supramolecular discrete hydrogen-bonded units which are further interconnected via π-π stacking. Compound 2, on the other hand, exhibits a more complex hydrogen bonding network due to the presence of the water molecules of crystallisation which, along with π-π stacking between neighbouring Hphen⁺ residues, mediate the crystal packing.     

Electrochemical detection of natural DNA damage induced by ferritin/ascobic acid/H2O2 system and amplification of DNA damage by endonuclease Fpg

Oppositely charged natural DNA and chitosan (CS) were assembled into (CS/DNA)_n layer-by-layer films on electrode surface, and Ru(bpy)₃²⁺ (bpy = bipyridyl) in solution was used as electroactive catalyst to detect damage of DNA in the films after incubation of the films in ferritin/AA/H₂O₂ solutions (AA = ascorbic acid). The mechanism of DNA damage caused by the ferritin/AA/H₂O₂ system was similar to that of Fenton reaction, where the reaction of ferritin with AA would release some Fe(II) ions from ferritin and the following reaction between Fe(II) ions and H₂O₂ would produce hydroxyl radical, which could induce DNA oxidative damage. This system provided an in vitro model to imitate the DNA damage indirectly induced by ferritin in real bio-systems. In addition, formamidopyrimidine DNA glycosylase (Fpg), a key endonuclease enzyme in repair of oxidatively damaged DNA, was used to amplify the DNA damage caused by ferritin/AA/H₂O₂ system through conversion of oxidative purine bases into single-strand breaks. The high sensitivity of electrocatalytic method with Ru(bpy)₃²⁺ as the catalyst in detection of DNA damage and the magnification function of Fpg may provide a novel idea to detect natural DNA lesion sensitively.     

Fe3O4 precipitation in magnetotactic bacteria

Using Mössbauer resonance spectroscopy of ⁵⁷Fe, we have determined the nature and distribution of major iron compounds in the magnetotactic bacterium Aquaspirillum magnetotacticum. In addition to magnetite (Fe₃O₄), cells contained a low-density hydrous ferric oxide, a high-density hydrous ferric oxide (ferrihydrite), and ferrous iron. Analysis at different temperatures of whole cells harvested early and late in growth, of mutant cells unable to synthesize magnetite, and of cell fractions enriched in ⁵⁷Fe indicated that Fe₃O₄ precipitation resulted from partial reduction of the high-density hydrous ferric oxide precursor.     

A seven-coordinate Fe compound: [Fe{O(CH2CO2)2}(H2O)2(NO3)]. Preparation, structure and magnetic properties

A seven-coordinate Fe^III complex, [Fe(oda)(H₂O)₂(NO₃)], was obtained after dissolving Fe(NO₃)₃ · 9H₂O in an aqueous solution of oxydiacetic acid (H₂oda) at room temperature. In the solid state, the Fe^III center adopts a pentagonal bipyramid geometry with an {FeO₇} core formed by a tridentate oda²⁻ and a bidentate in the equatorial plane, and two axial water molecules. Magnetic measurements and EPR spectra revealed the presence of S = 5/2 Fe^III centers with rhombic zero field splitting parameters (D = 0.81 cm⁻¹, E/D = 0.33 ). Weak antiferromagnetic interactions with J ≈ −0.06 cm⁻¹ operating between neighboring Fe ions connected through Fe-O-C-O?H-O-Fe paths are estimated using the molecular field approximation.     

Heat insulation performance,mechanics and hydrophobic modification of cellulose–SiO2 composite aerogels

Cellulose–SiO₂ composite hydrogel was prepared by combining the NaOH/thiourea/H₂O solvent system and the immersion method with controlling the hydrolysis–fasculation rate of tetraethyl orthosilicate (TEOS). The hydrophobic composite aerogels were obtained through the freeze-drying technology and the cold plasma modification technology. Composite SiO₂ could obviously reduce the thermal conductivity of cellulose aerogel. The thermal conductivity could be as low as 0.026 W/(mK). The thermal insulation mechanism of the aerogel material was discussed. Composite SiO₂ reduced hydrophilicity of cellulose aerogel, but environmental humidity had a significant influence on heat insulation performance. After hydrophobic modification using CCl₄ as plasma was conducted, the surface of composite aerogel was changed from hydrophilic to hydrophobic and water contact angle was as high as 132°. The modified composite aerogel still kept good heat insulation performance. This work provided a foundation for the possibility of applying cellulose–SiO₂ composite aerogel in the insulating material field.     

Selective separation and enrichment of peptides for MS analysis using the microspheres composed of Fe3O4@nSiO2 core and perpendicularly aligned mesoporous SiO2 shell

In this work, we report the development of a novel enrichment protocol for peptides by using the microspheres composed of Fe₃O₄@nSiO₂ Core and perpendicularly aligned mesoporous SiO₂ shell (designated Fe₃O₄@nSiO₂@mSiO₂). The Fe₃O₄@nSiO₂@mSiO₂ microspheres possess useful magnetic responsivity which makes the process of enrichment fast and convenient. The highly ordered nanoscale pores (2 nm) and high‐surface areas of the microspheres were demonstrated to have good size‐exclusion effect for the adsorption of peptides. An increase of S/N ratio over 100 times could be achieved by using the microspheres to enrich a standard peptide, and the application of the microspheres to enrich universal peptides was performed by using myoglobin tryptic digest solution. The enrichment efficiency of re‐used Fe₃O₄@nSiO₂@mSiO₂ microspheres was also studied. Large‐scale enrichment of endogenous peptides in rat brain extract was achieved by the microspheres. Automated nano‐LC‐ESI‐MS/MS was applied to analyze the sample after enrichment, and 60 unique peptides were identified in total. The facile and low‐cost synthesis as well as the convenient and efficient enrichment process of the novel Fe₃O₄@nSiO₂@mSiO₂ microspheres makes it a promising candidate for selectively isolation and enrichment of endogenous peptides from complex biological samples.     

Transesterification of sunflower oil to biodiesel on ZrO2 supported La2O3 catalyst

ZrO₂ supported La₂O₃ catalyst prepared by impregnation method was examined in the transesterification reaction of sunflower oil with methanol to produce biodiesel. It was found that the catalyst with 21 wt% loaded La₂O₃ and calcined at 600 °C showed the optimum activity. The basic property of the catalyst was studied by CO₂-TPD, and the results showed that the fatty acid methyl ester (FAME) yield was related to their basicity. The catalyst was also characterized by TG–DTA, XRD, FTIR, SEM and TEM, and the mechanism for the formation of basic sites was discussed. It was also found that the crystallite size of support ZrO₂ decreased by loading of La₂O₃, and the model of the solid-state reaction on the surface of La₂O₃/ZrO₂ catalyst was proposed. Besides, the influence of various reaction variables on the conversion was investigated.     

Cleavable ester-linked magnetic nanoparticles for labeling of solvent-exposed primary amine groups of peptides/proteins

To study the solvent-exposed lysine residues of peptides/proteins, we previously reported disulfide-linked N-hydroxysuccinimide ester-modified silica-coated iron oxide magnetic nanoparticles (NHS–SS–SiO₂@Fe₃O₄ MNPs). The presence of a disulfide bond in the linker limits the use of disulfide reducing agent during protein digestion and allows unwanted disulfide formation between the MNPs and protein. In the current work, the disulfide bond was replaced with a cleavable ester group to synthesize NHS ester-modified SiO₂@Fe₃O₄ MNPs. Use of the cleavable ester group provides an improved method for protein labeling and allows the use of disulfide reducing agents during protein digestion.