Temperature dependence of the free energy landscape of the src-SH3 protein domain

The temperature dependence of the free energy landscape of the src-SH3 protein domain is investigated through fully atomic simulations in explicit solvent. Simulations are performed above and below the folding transition temperature, enabling an analysis of both protein folding and unfolding. The transition state for folding and unfolding, identified from the free energy surfaces, is found to be very similar, with structure in the central hydrophobic sheet and little structure throughout the rest of the protein. This is a result of a polarized folding (unfolding) mechanism involving early formation (late loss) of the central hydrophobic sheet at the transition state. Unfolding simulations map qualitatively well onto low-temperature free energy surfaces but appear, however, to miss important features observed in folding simulations. In particular, details of the folding mechanism involving the opening and closing of the hydrophobic core are not captured by unfolding simulations performed under strongly denaturing conditions. In addition, free energy surfaces at high temperatures do not display a desolvation barrier found at lower temperatures, involving the expulsion of water molecules from the hydrophobic core.     

Is protein unfolding the reverse of protein folding? A lattice simulation analysis.

Simulations and experiments that monitor protein unfolding under denaturing conditions are commonly employed to study the mechanism by which a protein folds to its native state in a physiological environment. Due to the differences in conditions and the complexity of the reaction, unfolding is not necessarily the reverse of folding. To assess the relevance of temperature initiated unfolding studies to the folding problem, we compare the folding and unfolding of a 125-residue protein model by Monte Carlo dynamics at two temperatures; the lower one corresponds to the range used in T -jump experiments and the higher one to the range used in unfolding simulations of all-atom models. The trajectories that lead from the native state to the denatured state at these elevated temperatures are less diverse than those observed in the folding simulations. At the lower temperature, the system unfolds through a mandatory intermediate that corresponds to a local free energy minimum. At the higher temperature, no such intermediate is observed, but a similar pathway is followed. The structures contributing to the unfolding pathways resemble most closely those that make up the "fast track" of folding. The transition state for unfolding at the lower temperature (above Tm) is determined and is found to be more structured than the transition state for folding below the melting temperature. This shift towards the native state is consistent with the Hammond postulate. The implications for unfolding simulations of higher resolution models and for unfolding experiments of proteins are discussed.     

Unfolding of the cold shock protein studied with biased molecular dynamics

The cold shock protein from Bacillus caldolyticus is a small beta-barrel protein that folds in a two-state mechanism. For the native protein and for several mutants, a wealth of experimental data are available on stability and folding, so that it is an optimal system to study this process. We compare data from unfolding simulations (trajectories of 5 and up to 12 ns) obtained with a bias potential at room temperature and from unbiased thermal unfolding simulations with experimental data. The unfolding patterns derived from the trajectories starting from different native-like conformations and subject to different unfolding conditions agree. The transition state found in the simulations of unfolding is close to the native structure in agreement with experiment. Moreover, a lower value of the free energy barrier of unfolding was found for the mutant R3E than for the mutant E46A and the native protein, as indicated by experimental data. The first unfolding event involves the three-stranded beta-sheet whose decomposition corresponds to the transition state. In contrast to conclusions drawn from experiments, we found that the two-stranded beta-strand forms the most stable substructure, which decomposes very late in the unfolding process. However, assuming that this structure forms very early in the folding process, our findings would not contradict the experiments but require a different interpretation of them.     

Folding and unfolding of gammaTIM monomers and dimers

Kinetic simulations of the folding and unfolding of triosephosphate isomerase (TIM) from yeast were conducted using a single monomer gammaTIM polypeptide chain that folds as a monomer and two gammaTIM chains that fold to the native dimer structure. The basic protein model used was a minimalist Gō model using the native structure to determine attractive energies in the protein chain. For each simulation type--monomer unfolding, monomer refolding, dimer unfolding, and dimer refolding--thirty simulations were conducted, successfully capturing each reaction in full. Analysis of the simulations demonstrates four main conclusions. First, all four simulation types have a similar "folding order", i.e., they have similar structures in intermediate stages of folding between the unfolded and folded state. Second, despite this similarity, different intermediate stages are more or less populated in the four different simulations, with 1), no intermediates populated in monomer unfolding; 2), two intermediates populated with beta(2)-beta(4) and beta(1)-beta(5) regions folded in monomer refolding; 3), two intermediates populated with beta(2)-beta(3) and beta(2)-beta(4) regions folded in dimer unfolding; and 4), two intermediates populated with beta(1)-beta(5) and beta(1)-beta(5) + beta(6) + beta(7) + beta(8) regions folded in dimer refolding. Third, simulations demonstrate that dimer binding and unbinding can occur early in the folding process before complete monomer-chain folding. Fourth, excellent agreement is found between the simulations and MPAX (misincorporation proton alkyl exchange) experiments. In total, this agreement demonstrates that the computational Gō model is accurate for gammaTIM and that the energy landscape of gammaTIM appears funneled to the native state.     

Probing the energy landscape of the membrane protein bacteriorhodopsin

The folding and stability of transmembrane proteins is a fundamental and unsolved biological problem. Here, single bacteriorhodopsin molecules were mechanically unfolded from native purple membranes using atomic force microscopy and force spectroscopy. The energy landscape of individual transmembrane alpha helices and polypeptide loops was mapped by monitoring the pulling speed dependence of the unfolding forces and applying Monte Carlo simulations. Single helices formed independently stable units stabilized by a single potential barrier. Mechanical unfolding of the helices was triggered by 3.9-7.7 A extension, while natural unfolding rates were of the order of 10(-3) s(-1). Besides acting as individually stable units, helices associated pairwise, establishing a collective potential barrier. The unfolding pathways of individual proteins reflect distinct pulling speed-dependent unfolding routes in their energy landscapes. These observations support the two-stage model of membrane protein folding in which alpha helices insert into the membrane as stable units and then assemble into the functional protein.     

Methods for molecular dynamics simulations of protein folding/unfolding in solution

All atom molecular dynamics simulations have become a standard method for mapping equilibrium protein dynamics and non-equilibrium events like folding and unfolding. Here, we present detailed methods for performing such simulations. Generic protocols for minimization, solvation, simulation, and analysis derived from previous studies are also presented. As a measure of validation, our water model is compared with experiment. An example of current applications of these methods, simulations of the ultrafast folding protein Engrailed Homeodomain are presented including the experimental evidence used to verify their results. Ultrafast folders are an invaluable tool for studying protein behavior as folding and unfolding events measured by experiment occur on timescales accessible with the high-resolution molecular dynamics methods we describe. Finally, to demonstrate the prospect of these methods for folding proteins, a temperature quench simulation of a thermal unfolding intermediate of the Engrailed Homeodomain is described.     

Geofold: topology-based protein unfolding pathways capture the effects of engineered disulfides on kinetic stability

Protein unfolding is modeled as an ensemble of pathways, where each step in each pathway is the addition of one topologically possible conformational degree of freedom. Starting with a known protein structure, GeoFold hierarchically partitions (cuts) the native structure into substructures using revolute joints and translations. The energy of each cut and its activation barrier are calculated using buried solvent accessible surface area, side chain entropy, hydrogen bonding, buried cavities, and backbone degrees of freedom. A directed acyclic graph is constructed from the cuts, representing a network of simultaneous equilibria. Finite difference simulations on this graph simulate native unfolding pathways. Experimentally observed changes in the unfolding rates for disulfide mutants of barnase, T4 lysozyme, dihydrofolate reductase, and factor for inversion stimulation were qualitatively reproduced in these simulations. Detailed unfolding pathways for each case explain the effects of changes in the chain topology on the folding energy landscape. GeoFold is a useful tool for the inference of the effects of disulfide engineering on the energy landscape of protein unfolding.     

Experiment and theory highlight role of native state topology in SH3 folding.

We use a combination of experiments, computer simulations and simple model calculations to characterize, first, the folding transition state ensemble of the src SH3 domain, and second, the features of the protein that determine its folding mechanism. Kinetic analysis of mutations at 52 of the 57 residues in the src SH3 domain revealed that the transition state ensemble is even more polarized than suspected earlier: no single alanine substitution in the N-terminal 15 residues or the C-terminal 9 residues has more than a two-fold effect on the folding rate, while such substitutions at 15 sites in the central three-stranded beta-sheet cause significant decreases in the folding rate. Molecular dynamics (MD) unfolding simulations and ab initio folding simulations on the src SH3 domain exhibit a hierarchy of folding similar to that observed in the experiments. The similarity in folding mechanism of different SH3 domains and the similar hierarchy of structure formation observed in the experiments and the simulations can be largely accounted for by a simple native state topology-based model of protein folding energy landscapes.     

Computer simulations of protein folding by targeted molecular dynamics

We have performed 128 folding and 45 unfolding molecular dynamics runs of chymotrypsin inhibitor 2 (CI2) with an implicit solvation model for a total simulation time of 0.4 microseconds. Folding requires that the three-dimensional structure of the native state is known. It was simulated at 300 K by supplementing the force field with a harmonic restraint which acts on the root-mean-square deviation and allows to decrease the distance to the target conformation. High temperature and/or the harmonic restraint were used to induce unfolding. Of the 62 folding simulations started from random conformations, 31 reached the native structure, while the success rate was 83% for the 66 trajectories which began from conformations unfolded by high-temperature dynamics. A funnel-like energy landscape is observed for unfolding at 475 K, while the unfolding runs at 300 K and 375 K as well as most of the folding trajectories have an almost flat energy landscape for conformations with less than about 50% of native contacts formed. The sequence of events, i.e., secondary and tertiary structure formation, is similar in all folding and unfolding simulations, despite the diversity of the pathways. Previous unfolding simulations of CI2 performed with different force fields showed a similar sequence of events. These results suggest that the topology of the native state plays an important role in the folding process.     

Diffusing and colliding: the atomic level folding/unfolding pathway of a small helical protein

Proteins with ultra-fast folding/unfolding kinetics are excellent candidates for study by molecular dynamics. Here, we describe such simulations of a three helix bundle protein, the engrailed homeodomain (En-HD), which folds via the diffusion-collision model. The unfolding pathway of En-HD was characterized by seven simulations of the protein and 12 simulations of its helical fragments yielding over 1.1 micros of simulation time in water. Various conformational states along the unfolding pathway were identified. There is the compact native-like transition state, a U-shaped helical intermediate and an unfolded state with dynamic helical segments. Each of these states is in good agreement with experimental data. Examining these states as well as the transitions between them, we find the role of long-range tertiary contacts, specifically salt-bridges, important in the folding/unfolding pathway. In the folding direction, charged residues form long-range tertiary contacts before the hydrophobic core is formed. The formation of HII is assisted by a specific salt-bridge and by non-specific (fluctuating) tertiary contacts, which we call contact-assisted helix formation. Salt-bridges persist as the protein approaches the transition state, stabilizing HII until the hydrophobic core is formed. To complement this information, simulations of fragments of En-HD illustrate the helical propensities of the individual segments. By thermal denaturation, HII proved to be the least stable helix, unfolding in less than 450 ps at high temperature. We observed the low helical propensity of C-terminal residues from HIII in fragment simulations which, when compared to En-HD unfolding simulations, link the unraveling of HIII to the initial event that drives the unfolding of En-HD.     

Understanding the folding and stability of a designed WW domain protein with replica exchange molecular dynamics simulations

WW domain proteins are usually regarded as simple models for understanding the folding mechanism of β-sheet. CC45 is an artificial protein that is capable of folding into the same structure as WW domain. In this article, the replica exchange molecular dynamics simulations are performed to investigate the folding mechanism of CC45. The analysis of thermal stability shows that β-hairpin 1 is more stable than β-hairpin 2 during the unfolding process. Free energy analysis shows that the unfolding of this protein substantially proceeds through solvating the smaller β-hairpin 2, followed by the unfolding of β-hairpin 1. We further propose the unfolding process of CC45 and the folding mechanism of two β-hairpins. These results are similar to the previous folding studies of formin binding protein 28 (FBP28). Compared with FBP28, it is found that CC45 has more aromatic residues in N-terminal loop, and these residues contact with C-terminal loop to form the outer hydrophobic core, which increases the stability of CC45. Knowledge about the stability and folding behaviour of CC45 may help in understanding the folding mechanisms of the β-sheet and in designing new WW domains.     

Thermal unfolding simulations of a multimeric protein--transition state and unfolding pathways

The folding of an oligomeric protein poses an extra challenge to the folding problem because the protein not only has to fold correctly; it has to avoid nonproductive aggregation. We have carried out over 100 molecular dynamics simulations using an implicit solvation model at different temperatures to study the unfolding of one of the smallest known tetramers, p53 tetramerization domain (p53tet). We found that unfolding started with disruption of the native tetrameric hydrophobic core. The transition state for the tetramer to dimer transition was characterized as a diverse ensemble of different structures using Phi value analysis in quantitative agreement with experimental data. Despite the diversity, the ensemble was still native-like with common features such as partially exposed tetramer hydrophobic core and shifts in the dimer-dimer arrangements. After passing the transition state, the secondary and tertiary structures continued to unfold until the primary dimers broke free. The free dimer had little secondary structure left and the final free monomers were random-coil like. Both the transition states and the unfolding pathways from these trajectories were very diverse, in agreement with the new view of protein folding. The multiple simulations showed that the folding of p53tet is a mixture of the framework and nucleation-condensation mechanisms and the folding is coupled to the complex formation. We have also calculated the entropy and effective energy for the different states along the unfolding pathway and found that the tetramerization is stabilized by hydrophobic interactions.     

Single-molecule unfolding force distributions reveal a funnel-shaped energy landscape

The protein folding process is described as diffusion on a high-dimensional energy landscape. Experimental data showing details of the underlying energy surface are essential to understanding folding. So far in single-molecule mechanical unfolding experiments a simplified model assuming a force-independent transition state has been used to extract such information. Here we show that this so-called Bell model, although fitting well to force velocity data, fails to reproduce full unfolding force distributions. We show that by applying Kramers' diffusion model, we were able to reconstruct a detailed funnel-like curvature of the underlying energy landscape and establish full agreement with the data. We demonstrate that obtaining spatially resolved details of the unfolding energy landscape from mechanical single-molecule protein unfolding experiments requires models that go beyond the Bell model.     

Microsecond simulations of the folding/unfolding thermodynamics of the Trp‐cage miniprotein

We study the unbiased folding/unfolding thermodynamics of the Trp‐cage miniprotein using detailed molecular dynamics simulations of an all‐atom model of the protein in explicit solvent using the Amberff99SB force field. Replica‐exchange molecular dynamics simulations are used to sample the protein ensembles over a broad range of temperatures covering the folded and unfolded states at two densities. The obtained ensembles are shown to reach equilibrium in the 1 μs/replica timescale. The total simulation time used in the calculations exceeds 100 μs. Ensemble averages of the fraction folded, pressure, and energy differences between the folded and unfolded states as a function of temperature are used to model the free energy of the folding transition, ΔG(P, T), over the whole region of temperatures and pressures sampled in the simulations. The ΔG(P, T) diagram describes an ellipse over the range of temperatures and pressures sampled, predicting that the system can undergo pressure‐induced unfolding and cold denaturation at low temperatures and high pressures, and unfolding at low pressures and high temperatures. The calculated free energy function exhibits remarkably good agreement with the experimental folding transition temperature (T_f = 321 K), free energy, and specific heat changes. However, changes in enthalpy and entropy are significantly different than the experimental values. We speculate that these differences may be due to the simplicity of the semiempirical force field used in the simulations and that more elaborate force fields may be required to describe appropriately the thermodynamics of proteins. Proteins 2010. © 2010 Wiley‐Liss, Inc.     

Computer simulation of the folding-unfolding transition of island-model proteins--folding pathway, transition process, and fluctuations

Monte Carlo computer simulations were performed to elucidate the dynamic aspects of the folding and unfolding transitions of island-model protein. Five different types of model proteins were designed, according to characteristics of backbone structure. The computer simulations clearly show that the unfolding and folding transitions are all-or-none processes between the N-and U-states. They are typical Poisson processes. From the Arrhenius plots of rate constants, the activation enthalpies of folding and unfolding were determined. In addition, the folding pathways were determined along the reaction coordinate. Formations of several local structures along a polypeptide chain are almost simultaneous, but the most probable time sequence of events exists at the moment of transition. That is the most probable folding pathway. The unfolding pathway was found to be just the reverse process of the most probable folding pathway. The relationship between the fluctuations in each equilibrium state and the transition process was considered. In contrast to the theory of absolute reaction rate, the transient states are widely distributed along the reaction coordinate. From analysis of the “transient process,” we tried to determine the critical states from which the transient process starts. As a result, we found that the unfolding transition occurs at the stage near the N-state. During the U-state, large joined blocks rarely appear, but they appear in the transient process towards the N-state. However, the “branch point” between the N- and U-states lies near the N-state, and joined blocks tend to unfold prior to passing over the branch point. We concluded that the stability of later folding intermediates is important for selection of the folding pathway, while preferential selection of an early folding intermediate is important in acceleration of the folding rate. The effects of intrachain cross-linking and peptide fragment binding on the rate constants were examined by using computer simulations of model proteins. In general, a small-sized loop formed by cross-linking accelerates the folding rate and a large-sized loop contributes much to the stabilization of the native conformation. We also found that peptide fragment binding contributes little to the acceleration of the folding rate of the residual protein.     

Dimeric procaspase-3 unfolds via a four-state equilibrium process.

We have examined the folding and assembly of a catalytically inactive mutant of procaspase-3, a homodimeric protein that belongs to the caspase family of proteases. The caspase family, and especially caspase-3, is integral to apoptosis. The equilibrium unfolding data demonstrate a plateau between 3 and 5 M urea, consistent with an apparent three-state unfolding process. However, the midpoint of the second transition as well as the amplitude of the plateau are dependent on the protein concentration. Overall, the data are well described by a four-state equilibrium model in which the native dimer undergoes an isomeration to a dimeric intermediate, and the dimeric intermediate dissociates to a monomeric intermediate, which then unfolds. By fitting the four-state model to the experimental data, we have determined the free energy change for the first step of unfolding to be 8.3 +/- 1.3 kcal/mol. The free energy change for the dissociation of the dimeric folding intermediate to two monomeric intermediates is 10.5 +/- 1 kcal/mol. The third step in the unfolding mechanism represents the complete unfolding of the monomeric intermediate, with a free energy change of 7.0 +/- 0.5 kcal/mol. These results show two important points. First, dimerization of procaspase-3 occurs as a result of the association of two monomeric folding intermediates, demonstrating that procaspase-3 dimerization is a folding event. Second, the stability of the dimer contributes significantly to the conformational free energy of the protein (18.8 of 25.8 kcal/mol).     

Phi-analysis at the experimental limits: mechanism of beta-hairpin formation

The 37-residue Formin-binding protein, FBP28, is a canonical three-stranded beta-sheet WW domain. Because of its small size, it is so insensitive to chemical denaturation that it is barely possible to determine accurately a denaturation curve, as the transition spans 0-7 M guanidinium hydrochloride (GdmCl). It is also only marginally stable, with a free energy of denaturation of just 2.3 kcal/mol at 10 degrees Celsius so only small changes in energy upon mutation can be tolerated. But these properties and relaxation times for folding of 25 micros-400 micros conspire to allow the rapid acquisition of accurate and reproducible kinetic data for Phi-analysis using classical temperature-jump methods. The transition state for folding is highly polarized with some regions having Phi-values of 0 and others 1, as readily seen in chevron plots, with Phi-values of 0 having the refolding arms overlaying and those of 1 the unfolding arms superimposable. Good agreement is seen with transition state structures identified from independent molecular dynamics (MD) simulations at 60, 75, and 100 degrees Celsius, which allows us to explore further the details of the folding and unfolding pathway of FBP28. The first beta-turn is near native-like in the transition state for folding (experimental) and unfolding (MD and experiment). The simulations show that there are transient contacts between the aromatic side-chains of the beta-strands in the denatured state and that these interactions provide the driving force for folding of the first beta-hairpin of this three-stranded sheet. Only after the backbone hydrogen bonds are formed between beta1 and beta2 does a hydrogen bond form to stabilize the intervening turn, or the first beta-turn.     

Molecular simulations of mutually exclusive folding in a two-domain protein switch

A major challenge with testing designs of protein conformational switches is the need for experimental probes that can independently monitor their individual protein domains. One way to circumvent this issue is to use a molecular simulation approach in which each domain can be directly observed. Here we report what we believe to be the first molecular simulations of mutually exclusive folding in an engineered two-domain protein switch, providing a direct view of how folding of one protein drives unfolding of the other in a barnase-ubiquitin fusion protein. These simulations successfully capture the experimental effects of interdomain linker length and ligand binding on the extent of unfolding in the less stable domain. In addition, the effect of linker length on the potential for oligomerization, which eliminates switch activity, is in qualitative agreement with analytical ultracentrifugation experiments. We also perform what we believe to be the first study of protein unfolding via progressive localized compression. Finally, we are able to explore the kinetics of mutually exclusive folding by determining the effect of linker length on rates of unfolding and refolding of each protein domain. Our results demonstrate that molecular simulations can provide seemingly novel biological insights on the behavior of individual protein domains, thereby aiding in the rational design of bifunctional switches.     

Ruggedness in the Free Energy Landscape Dictates Misfolding of the Prion Protein

Experimental determination of the key features of the free energy landscapes of proteins, which dictate their adeptness to fold correctly, or propensity to misfold and aggregate and which are modulated upon a change from physiological to aggregation-prone conditions, is a difficult challenge. In this study, sub-millisecond kinetic measurements of the folding and unfolding of the mouse prion protein reveal how the free energy landscape becomes more complex upon a shift from physiological (pH 7) to aggregation-prone (pH 4) conditions. Folding and unfolding utilize the same single pathway at pH 7, but at pH 4, folding occurs on a pathway distinct from the unfolding pathway. Moreover, the kinetics of both folding and unfolding at pH 4 depend not only on the final conditions but also on the conditions under which the processes are initiated. Unfolding can be made to switch to occur on the folding pathway by varying the initial conditions. Folding and unfolding pathways appear to occupy different regions of the free energy landscape, which are separated by large free energy barriers that change with a change in the initial conditions. These barriers direct unfolding of the native protein to proceed via an aggregation-prone intermediate previously identified to initiate the misfolding of the mouse prion protein at low pH, thus identifying a plausible mechanism by which the ruggedness of the free energy landscape of a protein may modulate its aggregation propensity.