Surface structures of oligoglycines: A molecular dynamics simulation

An atomistic molecular dynamics (MD) simulation of the adsorption of biantennary oligoglycine [H-Gly₄-NH(CH₂)₅]₂ onto a graphite and mica surface is described. The structure of the resultant adsorption layers is analyzed. The secondary structure motifs of peptide blocks are studied by the STRIDE (structural identification) and DSSP (dictionary of the secondary structure of proteins) methods. The results of the study confirm the possibility of forming a polyglycine-II (PGII) structure in the monolayers of biantennary oligoglycines (BAOG) on a graphite surface previously supposed from the data of atomic force microscopy.     

Prediction of protein conformation in water and on surfaces by Monte Carlo simulations using united-atom method

The united-atom method has been used to model an avian pancreatic polypeptide (APP) in water and the adsorption process of an albumin subdomain (AS) onto graphite surface to observe the capability of this lumped modelling approach to generate structures observed in protein data bank (PDB) and from atomistic modelling. The subdomain structure of a protein is simplified by the united-atom approximation where the side chains and peptide groups are represented by lumped spheres. The total potential energy of the adsorption process involves the interaction between these lumped spheres by means of virtual bond chain interaction and the interaction of the spheres with the graphite surface by means of Lennard-Jones potential. The protein/polypeptide structure has been perturbed by Monte Carlo with energy minimisation to obtain the global minimum. Results on the APP in water showed a near-to-experimental PDB conformation revealing the two α-helix structures of this small protein molecule with the root mean square deviation among carbon backbone atoms of 5.9 Å. Protein adsorption on biosurfaces has been made by modelling AS, which has 60 amino acids. The surface is graphite, which is characterised by its hydrophobicity. Graphite was chosen because of its widely used applications in certain implants that interact with blood. Our simulation results showed final conformation close to that obtained by atomistic modelling. It also proved that the whole pattern of intramolecular hydrogen bonds was distorted. The model also demonstrated the random conformation of the original α-helix secondary structures of AS consistent with experimental and atomistic results. While atomistic simulation works well for simulating individual small proteins, the united-atom model is more efficient when simulating macromolecular and multiple protein adsorption where time and limiting computer capacity are key factors.     

Adsorption of synthetic homo- and hetero-oligodeoxynucleotides onto highly oriented pyrolytic graphite: atomic force microscopy characterization

DNA adsorption on electrode surfaces is of fundamental interest for the development of DNA-based biosensors. The free adsorption of 10-mer synthetic oligodeoxynucleotides (ODNs) onto highly oriented pyrolytic graphite (HOPG) surfaces was studied using Magnetic AC mode atomic force microscopy (MAC Mode AFM). The mechanism of interaction of nucleic acids with carbon electrode surfaces was elucidated, using 10-mer synthetic homo- and hetero-ODNs sequences of known base sequences, because they allow clear interpretation of the experimental data. AFM images in air revealed different adsorption patterns and degree of HOPG surface coverage for the ODNs, and correlation with the individual structure and base sequence of each ODN molecule will be presented. The results demonstrated that the hydrophobic interactions with the HOPG hydrophobic surface explain the main adsorption mechanism, although other effects such as electrostatic and Van der Waals interactions may contribute to the free adsorption process. The ODNs interacted differently with the HOPG surface, according to the ODN sequence hydrophobic characteristics, being directly depending on the molecular mass, the hydrophobic character of the individual bases and on the secondary structure of the molecule. The importance of the type of base existent at the ODN chain extremities on the adsorption process was investigated and different adsorption patterns were obtained with ODN sequences composed by the same group of bases aligned in a different order.     

Direct real‐time imaging of protein adsorption onto hydrophilic and hydrophobic surfaces

Atomic force microscopy has been used to follow in real time the adsorption from solution of two of the gliadin group of wheat seed storage proteins onto hydrophilic (mica) and hydrophobic (graphite) surfaces. The liquid cell of the microscope was used initially to acquire images of the substrate under a small quantity of pure solvent (1% acetic acid). Continuous imaging as an injection of gliadin solution entered the liquid cell enabled the adsorption process to be followed in situ from zero time. For ω‐gliadin, a monolayer was formed on the mica substrate during a period of ～2000 s, with the protein molecules oriented in parallel to the mica surface. In contrast, the ω‐gliadin had a relatively low affinity for the graphite substrate, as demonstrated by slow and weak adsorption to the surface. With γ‐gliadin, random deposition onto the mica surface was observed forming monodispersed structures, whereas on the graphite surface, monolayer islands of protein were formed with the protein molecules in a perpendicular orientation. Sequential adsorption experiments indicated strong interactions between the two proteins that, under certain circumstances, caused alterations to the surface morphologies of preadsorbed species. The results are relevant to our understanding of the interactions of proteins within the hydrated protein bodies of wheat grain and how these determine the processing properties of wheat gluten and dough. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 74–84, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Structure determination of the glycans of human-serum alpha 1-antichymotrypsin using 1H-NMR spectroscopy and deglycosylation by N-glycanase

alpha 1-Antichymotrypsin purified from normal human serum was separated by affinity chromatography into th ree microheterogeneous forms on a concanavalin-A-Sepharose column: a pass-through (peak 1), a retarded (peak 2) and a bound form (peaks 3 + 4). For each form the asparagine-linked carbohydrate chains were liberated as oligosaccharides by hydrazinolysis, submitted to reduction with NaBH4 after re-N-acetylation and further separated by affinity chromatography on a concanavalin-A-Sepharose column. The complete primary structure of the glycans was determined by high-resolution 1H-NMR spectroscopy. The results indicated the presence of disialyl diantennary and of trisialyl triantennary type glycanic structures, the latter being accompanied by traces of disialylated triantennary oligosaccharide. The N-glycanase was used for the deglycosylation of the unfractionated alpha 1-antichymotrypsin; the successive removal of the N-linked complex-type oligosaccharide side chains of alpha 1-antichymotrypsin was studied in the presence of detergents. From these experiments it is concluded that alpha 1-antichymotrypsin carries four oligosaccharide side chains. Moreover our results show that the peak 1 contains four triantennary glycans, the peak 2 three triantennary and one diantennary glycans while the bound peaks 3 + 4 possess, on average, about one triantennary and three diantennary glycans per molecule. Since we showed that the peak 4 contains mostly diantennary glycans, it can be deduced that in peak 3 there are molecules carrying two triantennary and two diantennary glycans and others carrying one triantennary and three diantennary glycans.     

Effect of Air Plasma Processing on the Adsorption Behaviour of Bovine Serum Albumin on Spin-Coated PMMA Surfaces

This paper reports the adsorption of Bovine Serum Albumin （BSA） onto Dielectric Barrier Discharge （DBD） processed Poly（methyl methacrylate） （PMMA） surfaces by a Quartz Crystal Microbalance with Dissipation monitoring （QCM-D） technique. The purpose is to study the influence of DBD processing on the nature and scale of BSA adsorption on PMMA surface in vitro. It was observed that DBD processing improves the surface wettability of PMMA film, a fact attributable to the changes in surface chemistry and topography. Exposure of the PMMA to Phosphate Buffed Saline （PBS） solution in the QCM-D system resulted in surface adsorption which reaches an equilibrium after about 30 minutes for pristine PMMA, and 90 minutes for processed PMMA surface. Subsequent injection of BSA in PBS indicated that the protein is immediately adsorbed onto the PMMA surface. It was revealed that adsorption behaviour of BSA on pristine PMMA differs from that on processed PMMA surface. A slower adsorption kinetics was observed for pristine PMMA surface, whilst a quick adsorption kinetics for processed PMMA. Moreover, the dissipation shift of protein adsorption suggested that BSA forms a more rigid structure on pristine PMMA surface that on processed surface. These data suggest that changes in wettability and attendant chemical properties and surface texture of the PMMA surface may play a significant role in BSA adsorption process.     

Dephosphorylation-induced structural changes in beta-casein and its amphiphilic fragment in relation to emulsion properties

To promote the understanding of the relationship between emulsifying and molecular properties of proteins/peptides, intact beta-casein (betaCN) and its amphipathic fragment, i.e., betaCN (1-105/107) were dephosphorylated. Dephosphorylation was found not to change significantly their emulsifying properties. Since it is known that the structure of proteins can change upon adsorption onto an interface, the secondary structure of intact beta-casein, its amphipathic fragment, and their dephosphorylated forms, both in solution and after adsorption onto a hydrophobic teflon/water interface, were studied by far-UV circular dichroism spectroscopy. An increased content of secondary structure, especially alpha-helix, was found for all samples after adsorption onto teflon. Dephosphorylation increased the helix-forming propensity, especially for amphipathic fragment of beta-casein. No influence of the secondary structure properties on the emulsion-forming and -stabilizing properties was observed, but a relationship between the maximum surface load and the emulsion-stabilizing properties was found.     

PM-IRRAS investigation of the interaction of serum albumin and fibrinogen with a biomedical-grade stainless steel 316LVM surface

Polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) was applied to investigate the interaction of bovine serum albumin (BSA) and fibrinogen with a biomedical-grade 316LVM stainless steel surface, in terms of the adsorption thermodynamics and adsorption-induced secondary structure changes of the proteins. Highly negative apparent Gibbs energy of adsorption values revealed a spontaneous adsorption of both proteins onto the surface, accompanied by significant changes in their secondary structure. It was determined that, at saturated surface coverages, lateral interactions between the adsorbed BSA molecules induced rather extensive secondary structure changes. Fibrinogen's two coiled coils appeared to undergo negligible secondary structure changes upon adsorption of the protein, while large structural rearrangements of the protein's globular domains occurred upon adsorption. The secondary structure of adsorbed fibrinogen was not influenced by lateral interactions between the adsorbed fibrinogen molecules. PM-IRRAS was deemed to be viable for investigating protein adsorption and for obtaining information on adsorption-induced changes in their secondary structures.     

Enhancing Protein Adsorption Simulations by Using Accelerated Molecular Dynamics

The atomistic modeling of protein adsorption on surfaces is hampered by the different time scales of the simulation ( s) and experiment (up to hours), and the accordingly different ‘final’ adsorption conformations. We provide evidence that the method of accelerated molecular dynamics is an efficient tool to obtain equilibrated adsorption states. As a model system we study the adsorption of the protein BMP-2 on graphite in an explicit salt water environment. We demonstrate that due to the considerably improved sampling of conformational space, accelerated molecular dynamics allows to observe the complete unfolding and spreading of the protein on the hydrophobic graphite surface. This result is in agreement with the general finding of protein denaturation upon contact with hydrophobic surfaces.     

Novel thymine-functionalized polystyrenes for applications in biotechnology. 2. Adsorption of model proteins

This paper investigates the adsorption of bovine serum albumin (BSA) and bovine hemoglobin (BHb) model proteins onto novel thymine-functionalized polystyrene (PS-VBT) microspheres, in comparison with polystyrene (PS) microspheres. Maximum adsorption was obtained for both proteins near their corresponding isoelectric points (pI at pH = 4.7 for BSA and 7.1 for BHb). FTIR and adsorption isotherm analysis demonstrated that, although both proteins were physisorbed onto PS through nonspecific hydrophobic interactions, adsorption onto the functionalized copolymers occurred by both physisorption and chemisorption via hydrogen bonding. FTIR analysis also indicated conformational changes in the secondary structure of BSA and BHb adsorbed onto PS, whereas little or no conformation change was seen in the case of adsorption onto PS-VBT. Atomic force microscopy (AFM), consistent with the isotherm results, also demonstrated monolayer adsorption for both proteins. AFM images of BSA adsorbed onto copolymers with 20 mol % surface VBT loading showed exclusively end-on orientation. Adsorption onto copolymers with lower functionality showed mixed end-on and side-on orientation modes of BSA, and only the side-on orientation was observed on PS. The AFM results agreed well with theoretically calculated and experimentally obtained adsorption capacities. AFM together with calculated and observed adsorption capacity data for BHb indicated that this protein might be highly compressed on the copolymer surface. Adsorption from a binary mixture of BSA and BHb onto PS-VBT showed good separation at pH=7.0; approximately 90% of the adsorbed protein was BHb. The novel copolymers have potential applications in biotechnology.     

Protein interactions with nanosized hydrotalcites of different composition

Nanosized hydrotalcite-like compounds (HTlc) with different chemical composition were prepared and used to study protein adsorption. Two soft proteins, myoglobin (Mb) and bovine serum albumin (BSA), were chosen to investigate the nature of the forces controlling the adsorption and how these depend on the chemical composition of the support. Both proteins strongly interact with HTlc exhibiting in most cases a Langmuir-type adsorption. Mb showed a higher affinity for Nickel Chromium (NiCr-HTlc) than for Nickel Aluminum (NiAl-HTlc), while for BSA no significant differences between supports were found. Adsorption experiments in the presence of additives showed that proteins exhibited different types of interactions onto the same HTlc surface and that the adsorption was strongly suppressed by the addition of disodium hydrogen phosphate (Na₂HPO₄). Atomic force microscopy images showed that the adsorption of both proteins onto nanoparticles was followed by the aggregation of biocomposites, with a more disordered structure for BSA. Fluorescence measurements for adsorbed Mb showed that the inorganic nanoparticles induced conformational changes in the biomolecules; in particular, the interactions with HTlc surface quenched the tryptophan fluorescence and this process was particularly efficient for NiCr-HTlc. The adsorption of BSA onto the HTlc nanoparticles induced a selective quenching of the exposed fluorescent residues, as indicated by the blue-shift of the emission spectra of tryptophan residues and by the shortening of the fluorescence decay times.     

Biofuel anode based on d-glucose dehydrogenase,nicotinamide adenine dinucleotide and a modified electrode

A biofuel cell anode has been made from a modified graphite electrode and immobilized d-glucose dehydrogenase [β-d-glucose:NAD(P)⁺ 1-oxidoreductase, EC 1.1.1.4 7] so that energy could be drawn from the conversion of d-glucose to d-gluconic acid. An equivalent amount of dihydronicotinamide adenine dinucleotide (NADH) was formed from NAD⁺ and reduced the surface groups of the modified electrode. Reoxidationn of the latter produced the electrons necessary for a power output from the cell. Electrode modification was made by adsorption of N,N-dimethyl-7-amino 1,2-benzophenoxazinium onto the graphite. A current density of 0.2 mA cm^?2 at a cell voltage of ～0.8 V was obtained for more than 8 h with a simulated oxygen cathode. The internal resistance in the cell, in particular in the separator, appeared to be the main current-limiting factor.     

High-throughput analysis of mumps virus and the virus-specific monoclonal antibody on the arrays of a cationic polyelectrolyte with a spectral SPR biosensor

We investigated the potential use of a spectral surface plasmon resonance (SPR) biosensor in a high-throughput analysis of mumps virus and a mumps virus-specific mAb on the arrays of a cationic polyelectrolyte, poly(diallyldimethylammonium chloride) (PDDA). The PDDA surface was constructed by electrostatic adsorption of the polyelectrolyte onto a monolayer of 11-mercaptoundecanoic acid (MUA). Poly-L-lysine was also adsorbed onto the MUA monolayer and compared with the PDDA surface in the capacity of mumps virus immobilization. The PDDA surface showed a higher adsorption of mumps virus than the poly-L-lysine surface. The SPR signal caused by the virus binding onto the PDDA surface was proportional to the concentration of mumps virus from 0.5 x 10(5) to 14 x 10(5) pfu/mL. The surface structure of the virus arrays was visualized by atomic force microscopy. Then, a dose-dependent increase in the SPR signal was observed when various concentrations of the antimumps virus antibody in buffer or human serum were applied to the virus arrays, and their interaction was specific. Thus, it is likely that the spectral SPR biosensor based on the cationic polyelectrolyte surface may provide an efficient system for a high-throughput analysis of intact virus and serodiagnosis of infectious diseases.     

Disposable DNA electrochemical sensor for hybridization detection

A disposable electrochemical sensor for the detection of short DNA sequences is described. Synthetic single-stranded oligonucleotides have been immobilized onto graphite screen printed electrodes with two procedures, the first involving the binding of avidinbiotinylated oligonucleotide and the second adsorption at a controlled potential. The probes were hybridized with different concentrations of complementary sequences. The formed hybrids on the electrode surface were evaluated by differential pulse voltammetry and chronopotentiometric stripping analysis using daunomycin hydrochloride as indicator of hybridization reaction. The probe immobilization step, the hybridization event and the indicator detection, have been optimized. The DNA sensor obtained by adsorption at a controlled potential was able to detect 1 microgram/ml of target sequence in the buffer solution using chronopotentiometric stripping analysis.     

Adsorption from saliva to silica and hydroxyapatite surfaces and elution of salivary films by SDS and delmopinol

The adsorption of proteins from human whole saliva (HWS) onto silica and hydroxyapatite surfaces (HA) was followed by quartz crystal microbalance with dissipation (QCM-D) and ellipsometry. The influence of different surface properties and adsorption media (water and PBS) on the adsorption from saliva was studied. The viscoelastic properties of the salivary films formed on the solid surfaces were estimated by the use of the Voigt-based viscoelastic film model. Furthermore, the efficiency of SDS and delmopinol to elute the adsorbed salivary film from the surfaces was investigated at different surfactant concentrations. A biphasic kinetic regime for the adsorption from saliva on the silica and HA surfaces was observed, indicating the formation of a rigidly coupled first layer corresponding to an initial adsorption of small proteins and a more loosely bound second layer. The results further showed a higher adsorption from HWS onto the HA surfaces compared to the silica surfaces in both adsorption media (PBS and water). The adsorption in PBS led to higher adsorbed amounts on both surfaces as compared to water. SDS was found to be more efficient in removing the salivary film from both surfaces than delmopinol. The salivary film was found to be less tightly bound onto the silica surfaces since more of the salivary film could be removed with both SDS and delmopinol compared to that from the HA surface. When adsorption took place from PBS the salivary layer formed at both surfaces seemed to have a similar structure, with a high energy dissipation implying that a softer salivary layer is built up in PBS as opposed to that in water. Furthermore, the salivary layers adsorbed from water solutions onto the HA were found to be softer than those on silica.     

Conformation,orientation, and adsorption kinetics of dermaseptin B2 onto synthetic supports at aqueous/solid interface

The antimicrobial activity of cationic amphipathic peptides is due mainly to the adsorption of peptides onto target membranes, which can be modulated by such physicochemical parameters as charge and hydrophobicity. We investigated the structure of dermaseptin B2 (Drs B2) at the aqueous/synthetic solid support interface and its adsorption kinetics using attenuated total reflection Fourier transform infrared spectroscopy and surface plasmon resonance. We determined the conformation and affinity of Drs B2 adsorbed onto negatively charged (silica or dextran) and hydrophobic supports. Synthetic supports of differing hydrophobicity were obtained by modifying silica or gold with omega-functionalized alkylsilanes (bromo, vinyl, phenyl, methyl) or alkylthiols. The peptide molecules adsorbed onto negatively charged supports mostly had a beta-type conformation. In contrast, a monolayer of Drs B2, mainly in the alpha-helical conformation, was adsorbed irreversibly onto the hydrophobic synthetic supports. The conformational changes during formation of the adsorbed monolayer were monitored by two-dimensional Fourier transform infrared spectroscopy correlation; they showed the influence of peptide-peptide interactions on alpha-helix folding on the most hydrophobic support. The orientation of the alpha-helical Drs B2 with respect to the hydrophobic support was determined by polarized attenuated total reflection; it was around 15 +/- 5 degrees. This orientation was confirmed and illustrated by a molecular dynamics study. These combined data demonstrate that specific chemical environments influence the structure of Drs B2, which could explain the many functions of antimicrobial peptides.     

Structure of immunoglobulin G by scanning tunnelling microscopy

Scanning tunnelling microscopy (STM) has been used to examine the shape of individual immunoglobulin G (IgG) molecules deposited onto a graphite surface. IgG was chosen for this study as it has a well-characterized and distinctive three-dimensional structure. The micrographs clearly reveal the IgG molecule as trilobed, corresponding with the known structural organization of IgG. Comparison of these images with the structure of IgG determined by X-ray crystallography shows that the STM images are consistent with the crystal structure. This illustrates that STM is a valuable technique for examining protein structure, allowing rapid determination of the overall molecular shape that is consistent with more established techniques.     

Carbohydrate microheterogeneity of rat serotransferrin. Determination of glycan primary structures and characterization of a new type of trisialylated diantennary glycan

A previously established procedure [Regoeczi, E., Chindemi, P.A., Rudolph, J. R., Spik, G. & Montreuil, J. (1987) Biochem. Cell Biol. 65, 948-954] was used to isolate from three DEAE-cellulose chromatographic fractions of diferric rat serotransferrin (rTf) subpopulations having discernible affinities for concanavalin A (ConA). These entities are designated rTf-1 (not retarded by ConA column), rTf-2 (retarded) and rTf-3 (bound). Each rTf type was found to be endowed with carbohydrate sufficient to account for a single diantennary glycan/protein molecule. Glycan structures were determined on the glycopeptides by employing GLC/MS and 400-MHz 1H-NMR spectroscopy. All glycans possessed a common, trimannosyl-N,N'-diacetylchitobiose core with or without one L-fucose alpha-1,6-linked to the Asn-linked GlcNAc. However, there were differences in the antennae. Thus, in rTf-3, both antennae were of the disialylated diantennary N-acetyllactosamine type which is frequently encountered in other plasma glycoproteins. However, the alpha-1,3-Man-linked antenna in rTf-1 as well as rTf-2 had the sequence: Neu5Ac(alpha 2-3)Gal(beta 1-3)[Neu5Ac(alpha 2-6)]GlcNAc(beta 1-2)Man. In addition, the alpha-1,6-Man-linked antenna deviated in rTf-2 from the standard structure by having the sequence: Neu5Ac(alpha 2-3)Gal(beta 1-3)GlcNAc(beta 1-2)Man. The possible relevance of the above structures to the ConA binding of rTf is discussed. A further preparation, obtained from the most anionic DEAE-cellulose fraction (peak V) or rTf contained several tetrasialylated diantennary glycans whose precise structures remain to be established in future studies.     

Activity,conformation and dynamics of cutinase adsorbed on poly(methyl methacrylate) latex particles

The adsorption of a recombinant cutinase from Fusarium solani pisi onto the surface of 100 nm diameter poly(methyl methacrylate) (PMMA) latex particles was evaluated. Adsorption of cutinase is a fast process since more than 70% of protein molecules are adsorbed onto PMMA at time zero of experiment, irrespective of the tested conditions. A Langmuir-type model fitted both protein and enzyme activity isotherms at 25 degrees C. Gamma(max) increased from 1.1 to 1.7 mg m(-2) and U(max) increased from 365 to 982 U m(-2) as the pH was raised from 4.5 to 9.2, respectively. A decrease (up to 50%) in specific activity retention was observed at acidic pH values (pH 4.5 and 5.2) while almost no inactivation (eta(act) congruent with 87-94%) was detected upon adsorption at pH 7.0 and 9.2. Concomitantly, far-UV circular dichroism (CD) spectra evidenced a reduction in the alpha-helical content of adsorbed protein at acidic pH values while at neutral and alkaline pH the secondary structure of adsorbed cutinase was similar to that of native protein. Fluorescence anisotropy decays showed the release of some constraints to the local motion of the Trp69 upon protein adsorption at pH 8.0, probably due to the disruption of the tryptophan-alanine hydrogen bond when the tryptophan interacts with the PMMA surface. Structural data associated with activity measurements at pH 7.0 and 9.2 showed that cutinase adsorbs onto PMMA particles in an end-on orientation with active site exposed to solvent and full integrity of cutinase secondary structure. Hydrophobic interactions are likely the major contribution to the adsorption mechanism at neutral and alkaline pH values, and a higher amount of protein is adsorbed to PMMA particles with increasing temperature at pH 9.2. The maximum adsorption increased from 88 to 140 mg cutinase per g PMMA with temperature raising from 25 to 50 degrees C, at pH 9.2.     

Protein adsorption at polymer-grafted surfaces: comparison between a mixture of saliva proteins and some well-defined model proteins

Grafting a dense layer of soluble polymers onto a surface is a well-established method for controlling protein adsorption. In the present study, polyethylene oxide (PEO) layers of three different grafting densities were prepared, i.e. 10-15 nm2, 5.5 nm2 and 4 nm2 per polymer chain, respectively. The adsorption of different proteins on the PEO grafted surfaces was measured in real time by reflectometry. Furthermore, the change of the zeta-potential of such surfaces resulting from adsorption of the proteins was determined using the streaming potential method. Both the protein adsorption and the zeta-potential were monitored for 1 h after exposure of the protein solution to the surface. The adsorption pattern for a mixture of saliva proteins was compared to those observed for a number of well-defined model-proteins (lysozyme, human serum albumin, beta-lactoglobulin and ovalbumin). The results of the adsorption kinetics and streaming potential measurements indicate that the effect of the PEO layer on protein adsorption primarily depends on the size and the charge of the protein molecules. The saliva proteins are strongly blocked for adsorption, whereas the change in the zeta-potential is larger than for the other proteins (except lysozyme). It is concluded that positively charged protein molecules, having dimensions larger than those of lysozyme, are involved in the initial stage of adsorption from saliva onto a negatively charged surface.