Binding geometries of triple helix selective benzopyrido [4,3-b]indole ligands complexed with double- and triple-helical polynucleotides

The binding modes of three benzopyrido [4,3-b]indole derivatives (and one benzo[-f]pyrido [4-3b] quinoxaline derivative) with respect to double helical poly(dA) · poly(dT) and poly[d(A-T)]₂ and triple-helical poly(dA) · 2poly(dT) have been investigated using linear dichroism (LD) and CD: (I) 3-methoxy-11-amino-BePI where BePI = (7H-8-methyl-benzo[e]pyrido [4,3-b]indole), (II) 3-methoxy-11-[(3′-amino) propylamino]-BePI, (III) 3-methoxy-7-[(3′-diethylamino)propylamino] BgPI where BgPI = (benzo[g]pyrido[4,3-b]indole), and (IV) 3-methoxy-11-[(3′-amino)propylamino] B f P Q where B f P Q = {benzo[-f]pyrido[4-3b]quinoxaline}. The magnitudes of the reduced LD of the electronic transitions of the polynucleotide bases and of the bound ligands are generally very similar, suggesting an orientation of the plane of the ligands' fused-ring systems preferentially perpendicular to the helix axis. The LD results suggest that all of the ligands are intercalated for all three polynucleotides. The induced CD spectrum of the BePI chromophore in the (II-BePI)-poly[d(A-T)]₂ complex is almost a mirror image of that for the (I-BePI)-poly(dA) · poly(dT) and (I-BePI)-poly(dA) · 2poly(dT) complexes, suggesting an antisymmetric orientation of the BePI moiety upon intercalation in poly[d(A-T)]₂ compared to the other polynucleotides. The induced CD of I-BePI bound to poly(dA) · 2poly(dT) suggests a geometry that is intermediate between that of its other two complexes. The concluded intercalative binding as well as the conformational variations between the different BePI complexes are of interest in relation to the fact that BePI derivatives are triplex stabilizers. © 1997 John Wiley & Sons, Inc. Biopoly 42: 101–111, 1997     

Temperature dependence of the volumetric parameters of drug binding to poly[d(A-T)].Poly[d(A-T)] and Poly(dA).Poly(dT)

We report the temperature and salt dependence of the volume change (DeltaVb) associated with the binding of ethidium bromide and netropsin with poly(dA).poly(dT) and poly[d(A-T)].poly[d(A-T)]. The DeltaV(b) of binding of ethidium with poly(dA).poly(dT) was much more negative at temperatures approximately 70 degrees C than at 25 degrees C, whereas the difference is much smaller in the case of binding with poly[d(A-T)].poly[d(A-T)]. We also determined the volume change of DNA-drug interaction by comparing the volume change of melting of DNA duplex and DNA-drug complex. The DNA-drug complexes display helix-coil transition temperatures (Tm several degrees above those of the unbound polymers, e.g., the Tm of the netropsin complex with poly(dA)poly(dT) is 106 degrees C. The results for the binding of ethidium with poly[d(A-T)].poly[d(A-T)] were accurately described by scaled particle theory. However, this analysis did not yield results consistent with our data for ethidium binding with poly(dA).poly(dT). We hypothesize that heat-induced changes in conformation and hydration of this polymer are responsible for this behavior. The volumetric properties of poly(dA).poly(dT) become similar to those of poly[d(A-T)].poly[d(A-T)] at higher temperatures.     

Polymorphism of DNA double helices

Native DNA duplexes in fibers exist usually in one of three well-known (A, B and C) forms depending on relative humidity, type of cations and the amount of retained salt. To determine the precise influence of these factors and the effect of base composition, as well as base sequence, on DNA secondary structure, X-ray diffraction methods have been used to study all four synthetic DNA duplexes with repeated dinucleotide sequences, eight of the 12 with repeated trinucleotide sequences and seven analogues in which guanine was replaced with hypoxanthine. The results indicate that there are at least six additional allomorphs denoted by B′, C′, C″, D, E and S.The B′ form (h = 0.329 nm) observed for poly(dA) · poly(dT), poly(dI) · poly(dC) and poly[d(A-I)] · poly[d(C-T)] is a minor variant of the traditional B form (h = 0.338 nm) of native DNA. The two C-like forms C′ for poly[d(A-G-C)] · poly-[d(G-C-T)] and poly[d(G-G-T)] · poly[d(A-C-C)] and C″ for poly[d(A-G)] · poly-[d(C-T)] have, respectively, 9₁ and 9₂ symmetries which reflect repetition of trinucleotide and dinucleotide sequences, respectively. Although isocompositional with poly(dA) · poly(dT), the existence of the rather different D form (8₁) for poly[d(A-T)] · poly[d(A-T)] or for poly[d(A-A-T)] · poly[d(A-T-T)] is a clear demonstration of the sequence effect. The I · C pair generally mimics an A · T pair, but poly[d(I-I-T)] · poly[d(A-C-C)] provides a new (E) form with approximately 15₂ screw symmetry and with 〈h〉 = 0.325 nm and 〈t〉 = 48 dg per nucleotide. The S form (6₅) observed for poly[d(G-C)] · poly[d(G-C)] and poly[d(A-C)] · poly[d(G-T)] is an unusual left-handed polydinucleotide helix and is accessible to any alternating purine-pyrimidine sequence. In it the two nucleotides have quite different conformations and involve syn purine and anti pyrimidine nucleosides.     

Differences in melting behavior between homopolymers and copolymers of DNA: Role of nonbonded forces for GC and the role of the hydration spine and premelting transition for AT

Melting measurements of the mono-base-pair DNA polymers showed that the melting temperature T_m of the B-DNA homopolymer poly (dA ) · poly (dT) is higher than that of the copolymer poly [d(A-T)]. On the other hand, the T_mof the B-DNA homopolymer poly (dG) · poly (dC) is lower than that of the copolymer poly [d (G-C)]. From a structural point of view, the cross-strand base-stacking interaction in a DNA homopolymer is weaker than that in a DNA copolymer with the same base pair. One would then expect that all the DNA homopolymers are less stable than the copolymer with the same base pair. We find that the inversion of the melting order seen in the AT mono-base-pair DNA polymers is caused by the enhanced thermal stability of poly (dA) · poly (dT) from a well-defined spine of hydration attached to its minor groove. In this paper we employ the modified self-consistent phonon theory to calculate base-pair opening probabilities of four B-DNA polymers: poly(dA)-poly(dT), poly(dG) · poly(dC), poly[d(A-T)], and poly[d(G-C)] at temperatures from room temperature through the melting regions. Our calculations show that the spine of hydration can give the inverted melting order of the AT polymers as compared to the GC polymers in fair agreement with experimental measurements. Our calculated hydration spine disruption behavior in poly(dA) · poly(dT) at premelting temperatures is also in agreement with experimentally observed premelting transitions in poly (dA) · poly (dT). The work is in a sense a test of the validity of our models of nonbonded interactions and spine of hydration interactions. We find we have to develop the concept of a strained bond to fit observations in poly (dA) · poly(dT). The strained-bond concept also explains the otherwise anomalous stability of the hydration chain. © 1993 John Wiley & Sons, Inc.     

A hydrogen exchange study of the open segment in a DNA double helix

The kinetics of the hydrogen-deuterium exchange reactions of double-helical poly[d(A-T)]·poly[d(A-T)], poly(dA)·poly(dT), and constituent nucleosides (deoxyadenosine and thymidine) have been examined at various temperatures by stopped-flow ultraviolet spectrophotometry, in the spectral region 240–300 nm. The results were interpreted on the basis of a mechanism of the hydrogen exchange reaction of a helical polynucleotide, proposed by Englander and colleagues as well as by the Tsuboi and Nakanishi group. It was concluded that the rates of the base-pair opening reactions are nearly equal to one another in double-helical DNAs, irrespective of the base sequence. On the other hand, the free energy required for bringing the open segment at a particular base-pair was found to be much greater for poly(dA)·poly(dT) than for poly[d(A-T)]· poly[d(A-T)].     

Binding of ligands to a one-dimensional heterogeneous lattice. III. Kinetic model and relaxation study of the interaction of tilorone with DNA and polynucleotides

A temperature-jump relaxation study of the interaction of tilorone with different polynucleotides and DNA has been performed. A single relaxation time, attributed to the intercalation step, has been observed in the case of poly[d(A-T)]·poly[d(A-T)], poly[d(A-C)]·poly[d(G-T)], poly[d(G-C)]·poly[d(G-C)], and poly(dG)·poly(dC). No intercalation into poly(dA)·poly(dT) occurs, and the interaction with poly(dG)·poly(dC) is different from what is observed with the other intercalating homopolymers. Refinement of the binding model is suggested from the analysis of the kinetic data. The relaxation curves obtained with DNA are well simulated based on a binding mechanism where DNA is considered a heterogeneous lattice and each type of site behaves as if it were located in the corresponding homopolymer. Poly(dA)·poly(dT) shows a unique behavior: studies of the effects of concentration and temperature indicate that tilorone acts as a probe of a process involving the polynucleotide alone. This process appears to be related to the dynamic structure of the nucleic acid and is detectable only when the bound dye is not intercalated.     

Binding of ligands to a one-dimensional heterogeneous lattice. II. Intercalation of tilorone with DNA and polynucleotides

The interaction of tilorone with DNA and five synthetic polydeoxyribonucleotides [(I): poly[d(A-T)]·poly[d(A-T)]; (II): poly[d(A-C)]·poly[d(G-T)]; (III): poly[d(G-C)]·poly[d(G-C)]; (IV): poly(dG)·poly(dC); and (V): poly(dA)·poly(dT)] has been investigated. Binding isotherms for the homopolymers were obtained by microdialysis equilibria using ¹⁴C-labeled tilorone and interpreted with different models: exclusion effect, associated or not associated with cooperativity, or variable exclusion. Affinity appears to be related more to local structure than to base composition and decreases in the following order: (I) > (II) > (III) > (IV) > (V). Intercalation in circular DNA was demonstrated by electrophoresis migration and electron microscopy, which yielded an average unwinding angle of 7° per bound dye. The behavior observed in CD and UV spectroscopy shows a sequence similar to the affinities. Tilorone seems to be less intercalated in (IV) and not at all in (V). The experimental binding isotherm of tilorone to DNA was well fitted on the basis of a model where DNA acts as a heterogeneous lattice built with the six different possible couples of adjacent base pairs, each potential site behaving as if it were in the corresponding homopolymer. The results are discussed in terms of specificity of alternating Pyr-Pur sequences and related to theoretical calculations on intercalation energies of DNA.     

Interactions of 5-(1-Pyrenyl)-10,15,20-tris(4-methylpyridinium)porphine with Double-Helix and Triple-Helix Nucleic Acids

Abstract

5-(1 -Pyrenyl)-10,15,20-tris(4-methylpyridinium)porphine (H₂PTMPP) having a porphyrin ring and a pyrenyl substituent was synthesized. The compound H₂PTMPP bound to poly(dA)?poly(dT) double helix and poly(dA)?2poly(dT) triple helix in different styles. The results of H₂PTMPP binding to oligonucleotides, dA₁₄?dT₁₄ and dA₁₄?2dT₁₄, was also shown.

     

Circular dichroism of adenine and thymine containing synthetic polynucleotides

Circular dichroism (CD) spectra of poly(dA), poly(dT), poly(dA)·poly(dT), and poly[d(A-T)]·poly[d(T-A)] have been measured as a function of temperature. From these data difference spectra have been calculated by subtracting the spectrum measured at low temperature from the spectra measured at higher temperatures. The CD difference spectra obtained upon melting of the two double-stranded polymers are very similar. From a comparison of these difference spectra with calculated ones it is shown that optical transitions near 272 nm (on A) and 288 nm (most probably on T) are present. The premelting changes of the CD spectrum of poly[d(A-t)]·poly[d(T-A)] are due to a change in conformation in which the secondary structure goes from a C- to B-type spectrum by increasing the A-type nature of the polymer. Such a change is not observed for poly(dA)·poly(dT). Instead, a transition between two different B-type geometries occurs.     

Infrared dichroism of polynucleotides of repeated sequence. I. Poly(dA)·poly(dT) and poly[d(A-T)]·poly[d(A-T)]

Infrared dichroism measurements of oriented films of poly(dA)·poly(dT) and poly[d(A-T)]·poly[d(A-T)] have been made under the conditions of low salts content and high humidity for which the geometry is known. The angles which the transition moments make with the helix axis are compared with the orientations of the corresponding bonds. Except for the in-plane base model of poly[(A-T)]·poly[d(A-T)], there is no agreement. This may imply either that a model which assumes bonds and transition moments to be colinear is not acceptable or that x-ray data are inaccurate. These possibilities are discussed especially with respect to phosphate group orientation. An appendix gives the derivations of dichroic-ratio expressions for helical molecules of different symmetry types.     

Netropsin Specifically Recognizes One of the Two Conformationally Equivalent Strands of Poly (dA)·Poly (dT). One Dimensional NMR Study at 500 MHz Involving NOE Transfer Between Netropsin and DNA Protons

Abstract

Recent observations that the heteronomous structural model for poly(dA)·poly(dT) is not found in solution and that in this DNA, the two strands are conformationally equivalent (J. Biomole. Str. Dyns. 2, 1057 (1985)), has added a new dimension to the structural dynamics of DNA-netropsin complex. Does the antibiotic somehow distinguish between the two strands and specifically interact with only one of the conformationally equivalent strands?

Model-building studies suggest that netropsin can either bind to the dA-strand in the minor groove such that H-bonds are formed between the imino protons N4-H, N6-H, N8-H of netropsin and N3 atoms of A or can bind to the dT-strand in the minor groove and form H-bonds between the imino-protons N4-H, N6-H, N8-H of netropsin and O2 atoms of T. If netropsin binds to the dA-strand, AH2 atoms of poly(dA)-poly(dT) would be in closer proximity to the imino protrons N4-H, N6-H, N8-H and pyrrole ring protons C5-H, Cll-H of netropsin than they would be, if netropsin binds to the dT-strand. In order to distinguish these possibilities experiments were conducted which involved NOE energy transfer between netropsin and DNA protons in the drug-DNA complex. Difference NOE spectra of netropsin·poly(dA)-poly(dT) complex in which AH2 was irradiated indicate that dominant NOEs were observed at the imino and pyrrole ring protons of netropsin. When the netropsin pyrrole ring protons were irradiated, the magnetization transfer was at AH2 of DNA. These observations suggest that netropsin binds to the dA-strand of poly(dA)-poly(dT) even though dA/dT strands are conformationally equivalent.     

Conformational properties of poly[d(G-T)].poly[d(C-A)] and poly[d(A-T)] in low- and high-salt solutions: NMR and laser Raman analysis

³¹P- and ¹H-nmr and laser Raman spectra have been obtained for poly[d(G-T)]·[d(C-A)] and poly[d(A-T)] as a function of both temperature and salt. The ³¹P spectrum of poly[d(G-T)]·[d(C-A)] appears as a quadruplet whose resonances undergo separation upon addition of CsCl to 5.5M. ¹H-nmr measurements are assigned and reported as a function of temperature and CsCl concentration. One dimensional nuclear Overhauser effect (NOE) difference spectra are also reported for poly[d(G-T)]·[d(C-A)] at low salt. NOE enhancements between the H8 protons of the purines and the C5 protons of the pyrimidines, (H and CH₃) and between the base and H-2′,2″ protons indicate a right-handed B-DNA conformation for this polymer. The NOE patterns for the TH3 and GH1 protons in H₂O indicate a Watson–Crick hydrogen-bonding scheme. At high CsCl concentrations there are upfield shifts for selected sugar protons and the AH2 proton. In addition, laser Raman spectra for poly[d(A-T)] and poly[d(G-T)]·[d(C-A)] indicate B-type conformations in low and high CsCl, with predominantly C2′-endo sugar conformations for both polymers. Also, changes in base-ring vibrations indicate that Cs⁺ binds to O2 of thymine and possibly N3 of adenine in poly[d(G-T)]·[d(C-A)] but not in poly[d(A-T)]. Further, ¹H measurements are reported for poly[d(A-T)] as a function of temperature in high CsCl concentrations. On going to high CsCl there are selective upfield shifts, with the most dramatic being observed for TH1′. At high temperature some of the protons undergo severe changes in linewidths. Those protons that undergo the largest upfield shifts also undergo the most dramatic changes in linewidths. In particular TH1′, TCH₃, AH1′, AH2, and TH6 all undergo large changes in linewidths, whereas AH8 and all the H-2′,2″ protons remain essentially constant. The maximum linewidth occurs at the same temperature for all protons (65°C). This transition does not occur for d(G-T)·d(C-A) at 65°C or at any other temperature studied. These changes are cooperative in nature and can be rationalized as a temperature-induced equilibrium between bound and unbound Cs⁺, with duplex and single-stranded DNA. NOE measurements for poly[d(A-T)] indicate that at high Cs⁺ the polymer is in a right-handed B-conformation. Assignments and NOE effects for the low-salt ¹H spectra of poly[d(A-T)] agree with those of Assa-Munt and Kearns [(1984) Biochemistry 23 , 791–796] and provide a basis for analysis of the high Cs⁺ spectra. These results indicate that both polymers adopt a B-type conformation in both low and high salt. However, a significant variation is the ability of the phosphate backbone to adopt a repeat dependent upon the base sequence. This feature is common to poly[d(G-T)]·[d(C-A)], poly[d(A-T)], and some other pyr–pur polymers [J. S. Cohen, J. B. Wouten & C. L Chatterjee (1981) Biochemistry 20 , 3049–3055] but not poly[d(G-C)].     

Poly(dA).poly(dT) exists in an unusual conformation under physiological conditions: propidium binding to poly(dA).poly(dT) and poly[d(A-T)].poly[d(A-T)]

The binding of propidium to poly(dA).poly(dT) [poly(dA.dT)] and to poly[d(A-T)].poly[d(A-T)] [poly[d(A-T)2]] has been compared under a variety of solution conditions by viscometric titrations, binding studies, and kinetic experiments. The binding of propidium to poly[d(A-T)2] is quite similar to its binding to calf thymus deoxyribonucleic acid (DNA). The interaction with poly(dA.dT), however, is quite unusual. The viscosity of a poly(dA.dT) solution first decreases and then increases in a titration with propidium at 18 degrees C. The viscosity of poly[d(A-T)2] shows no decrease in a similar titration. Scatchard plots for the interaction of propidium with poly(dA.dT) show the classical upward curvature for positive cooperativity. The curvature decreases as the temperature is increased in binding experiments. A van't Hoff plot of the observed binding constants yields an apparent positive enthalpy of approximately +6 kcal/mol for the propidium-poly(dA.dT) interaction. Propidium binding to poly[d(A-T)2] shows no evidence for positive cooperativity, and the enthalpy change for the reaction is approximately -9 kcal/mol. Both the magnitude of the dissociation constants and the effects of ionic strength are quite similar for the dissociation of propidium from poly(dA-T)2] and from poly[d(A-T)2], suggesting that the intercalated states are similar for the two complexes. The observed association reactions, under pseudo-first-order conditions, are quite different. Plots of the observed pseudo-first-order association rate constant vs. polymer concentration have much larger slopes for propidium binding to poly[d(A-T)2] than to poly(dA.dT).(ABSTRACT TRUNCATED AT 250 WORDS)     

Effect of cesium on the volume of the helix-coil transition of dA.dT polymers and their ligand complexes

The pressure dependence of the helix–coil transition of poly(dA)∙poly(dT) and poly[d(A-T)]·poly[d(A-T)] in aqueous solutions of NaCl and CsCl at concentrations between 10 and 200 mM is reported and used to calculate the accompanying volume change. We also investigated the binding parameters and volume change of ethidium bromide binding with poly(dA)∙poly(dT) and poly[d(A-T)]·poly[d(A-T)] in aqueous solutions of these two salts. The volume change of helix–coil transition of poly(dA)∙poly(dT) in Cs⁺-containing solutions differs by less than 1 cm³ mol^− 1 from the value measured when Na⁺ is the counter-ion. We propose that this insensitivity towards salt type arises if the counter-ions are essentially fully hydrated around DNA and the DNA conformation is not significantly altered by salt types. Circular dichroism spectroscopy showed that the previously observed large volumetric disparity for the helix–coil transition of poly[d(A-T)]·poly[d(A-T)] in solutions containing Na⁺ and Cs⁺ is likely result of a Cs⁺-induced conformation change that is specific for poly[d(A-T)]·poly[d(A-T)]. This cation-specific conformation difference is mostly absent for poly(dA)∙poly(dT) and EB bound poly[d(A-T)]·poly[d(A-T)].     

Binding of Hoechst 33258 and its Derivatives to DNA

Abstract

In the present work, we employed UV-VIS spectroscopy, fluorescence methods, and circular dichroism spectroscopy (CD) to study the interaction of dye Hoechst 33258, Hoechst 33342, and their derivatives to poly[d(AT)]·poly[d(AT)], poly(dA)·poly(dT), and DNA dodecamer with the sequence 5′-CGTATATATACG-3′. We identified three types of complexes formed by Hoechst 33258, Hoechst 33342, and methylproamine with DNA, corresponding to the binding of each drug in monomer, dimer, and tetramer forms. In a dimer complex, two dye molecules are sandwiched in the same place of the minor DNA groove. Our data show that Hoechst 33258, Hoechst 33342, and methylproamine also form complexes of the third type that reflects binding of dye associates (probably tetramers) to DNA. Substitution of a hydrogen atom in the ortho position of the phenyl ring by a methyl group has a little effect on binding of monomers to DNA. However it reduces strength of binding of tetramers to DNA. In contrast, a Hoechst derivative containing the ortho-isopropyl group in the phenyl ring exhibits a low affinity to poly(dA)·poly(dT) and poly[d(AT)]·poly[d(AT)] and binds to DNA only in the monomer form. This can be attributed to a sterical hindrance caused by the ortho-isopropyl group for side-by-side accommodation of two dye molecules in the minor groove. Our experiments show that mode of binding of Hoechst 33258 derivatives and their affinity for DNA depend on substituents in the ortho position of the phenyl ring of the dye molecule. A statistical mechanical treatment of binding of Hoechst 33258 and its derivatives to a polynucleotide lattice is described and used for determination of binding parameters of Hoechst 33258 and its derivatives to poly[d(AT)]·poly[d(AT)] and poly(dA)·poly(dT).     

Hydration of dA.dT polymers: role of water in the thermodynamics of ethidium and propidium intercalation

We report differences in the interaction of two structurally similar phenanthroline intercalators, ethidium and propidium, with poly(dA).poly(dT) and poly[d(A-T)] as a function of ionic strength based on titration microcalorimetry, fluorescence titration, and hydrostatic pressure measurements. Both ethidium and propidium bind more strongly to poly[d(A-T)].poly[d(A-T)] than to poly(dA).poly(dT). Ethidium intercalation into the latter polymer displays titrations with positive cooperativity; this is not found with propidium. The enthalpy of intercalation (delta H degrees) is exothermic for both dyes with poly[d(A-T)].poly[d(A-T)]; however, the value of this parameter is nearly zero in the case of poly(dA).poly(dT). The molar volume change (delta V degrees) accompanying dye intercalation is negative under all conditions for poly[d(A-T)].poly[d(A-T)] whereas it is positive for poly(dA).poly(dT). The changes observed in delta V degrees correlate well with the entropy changes derived from the titration and calorimetric data for this reaction. The results, interpreted in terms of the relative hydration of these two polymers, are consistent with a higher extent of hydration of poly(dA).poly(dT) relative to poly[d(A-T)].poly[d(A-T)].     

Electron Microscopic and Physico-Chemical Studies of DNA Complexes with Synthetic Oligopeptides: Binding Specificity and DNA Compact Structures

Abstract

Binding to DNA of two synthetic peptides, Val-Thr-Thr-Val-Val-NH-NH-Dns and Thr-Val- Thr-Lys-Val-Gly-Thr-Lsy-Val-Gly-Thr-Val-Val-NH-NH-Dns (where Dns is a residue of 5- dimethylaminonaphthalene-l-sulfonic acid), has been studied by circular dichroism, electron microscopy and fluorescence methods. It has been found that these two peptides can self- associate in aqueous solution as follows from the fact that concentration-dependent changes are observed in the UV absorbance and fluorescence spectra. The two peptides can bind to DNA both in self-associated and monomeric forms. The pentapeptide in the β-associated form binds more strongly to poly(dG) · poly(dC) than to poly[d(A-C)] · poly[d(G-T)] and poly(dA) · poly(dT) whereas the tridecapeptide exhibits an opposite order of preferences binding more strongly to poly[d(A-C)] · poly[d(G-T)] and poly(dA) · poly(dT) than to poly(dG) · poly(dC).

Binding is a cooperative process which is accompanied by the DNA compaction at peptide/DNA base pair ratios greater than l. At the initial stage of the compaction process, the coalescence of DNA segments covered by bound peptide molecules leads to the formation of DNA loops stabilized by the interaction between peptide molecules bound to different DNA segments. Further increase in the peptide/DNA ratio leads to the formation of rod-like structures each consisting of two or more double-stranded DNA segments. The final stage of the compaction process involves folding of fibrillar macromolecular complexes into a globular structure containing only one DNA molecule.     

A particulate DNA polymerase activity in adult rat brain

A particulate fraction of adult rat brain (sucrose buoyant density 1.24 gm/ml) catalyzed the incorporation of [³H]dTTP into an acid-insoluble product in an endogenously templated reaction sensitive to ribonuclease pretreatment. Upon fractionation, this activity was identified in the cerebellum, pons, frontal lobes and base. The DNA polymerase present in these brain fractions exhibited a strong preference for the synthetic template dT_12–18·poly rA rather than dT_12–18·poly dA; dT₁₀ was completely inactive. Purification and equilibrium Cs₂SO₄ gradient centrifugation of the [³H]DNA product-endogenous template complex suggested that RNA was serving as primer for endogenous DNA synthesis.     

Bh-DNA: Variations of the Poly[d(A)] · Poly[d(T)] Structure within the Framework of the Fibre Diffraction Studies

Abstract

A refinement of the recent results for poly[d(A)] · poly[d(T)] (Alexeev et al., J. Biomol. Struct. Dyn. 4, 989 (1987)) involving additional parameters of the base-pair structure and of the sugar- phosphate backbone expands the conformational potential of this polynucleotide of the B type to include the possibility of bifurcated hydrogen bonds of the kind recently discovered in crystalline deoxyoligonucleotide with lone d(A)_n · d(T)_n stretch (Nelson et al., Nature 330, 221 (1987)).

Still, analysis of the available data and energy calculations do not seem to indicate that the bifurcated H-bonds are a crucial factor responsible for the anomalous structure of the d(A)_n · d(T)_n sequence. The unique structural properties of poly [d(A)] · poly[d(T)] can hardly be explained without taking into account its interactions with the double-layer hydration spine in the minor groove. In view of the hydration mechanism stabilizing poly [d(A)] · poly [d(T)] and of the polynucleotide's heteronomous prehistory (Arnott et al., Nucleic Acids Res. 11, 4141 (1983)) we suggest that this B-type structure be called B_h.