Two distinct P element subfamilies in the genome of Drosophila bifasciata

The genome of Drosophila bifasciata harbours two distinct subfamilies of P-homologous sequences, designated M-type and O-type elements based on similarities to P element sequences from other species. Both subfamilies have some general features in common: they are of similar length (M-type: 2935 bp, O-type: 2986 bp), are flanked by direct repeats of 8 by (the presumptive target sequence), contain terminal inverted repeats, and have a coding region consisting of four exons. The splice sites are at homologous positions and the exons have the coding capacity for proteins of 753 amino acids (M-type) and 757 amino acids (O-type). It seems likely that both types of element represent functional transposons. The nucleotide divergence of the two P element subfamilies is high (31%). The main structural difference is observed in the terminal inverted repeats. Whereas the termini of M-type elements consist of 31 by inverted repeats, the inverted repeats of the O-type elements are interrupted by non-complementary stretches of DNA, 12 by at the 5 end and 14 by at the 3 end. This peculiarity is shared by all members of the O-type subfamily. Comparison with other P element sequences indicates incongruities between the phylogenies of the species and the P transposons. M-type and O-type elements apparently have no common origin in the D. bifasciata lineage. The M-type sequence seems to be most closely related to the P element from Scaptomyza pallida and thus could be considered as a more recent invader of the D. bifasciata gene pool. The origin of the O-type elements cannot be unequivocally deduced from the present data. The sequence comparison also provides new insights into conserved domains with possible implications for the function of P transposons.     

Do Deletions of Mos1-Like Elements Occur Randomly in the Drosophilidae Family?

We compared deleted copies of the seven mauritiana subfamilies of mariner transposable elements in species of the Drosophilidae. All elements were detected by PCR using the inverted terminal repeats of the Mos1 element of Drosophila mauritiana as primers. A higher frequency of breakpoints in the 5′ part of the element compared to the 3′ part was observed. Of the 27 deletions, 9 (33%) occurred between short direct repeats (SDR) of 5 to 8 bp. The SDRs can be at or close to the breakpoints of the deletion. A deleted copy of D. simulans (St. Martin population) had three repeats of a motif present only once in the complete consensus sequence. The high frequency of SDRs at or near the breakpoints of the deletions strongly suggests that some of them do not occur at random. Mechanisms that might explain these deletions, such as unequal crossing-over, ectopic recombination, and abortive gap repair, are discussed. Received: 22 December 2000 / Accepted: 12 July 2001     

A family of IS1031 elements in the genome of Acetobacter xylinum: nucleotide sequences and strain distribution

An insertion sequence (here called IS 1031A) from Acetobacter xylinum ATCC 23769 has recently been isolated. This study describes the complete nucleotide sequence of IS 1031A as well as the sequences of two novel iso-IS 1031 elements, IS1031C and IS1031D, from A. xylinum ATCC 23769. The three ISs are all exactly 930 bp long, have imperfect terminal inverted repeats of 24 bp for IS1031A and 21 bp for IS1031C and IS1031D, are flanked by three base pair direct repeats, and contain an open reading frame encoding a putative basic protein of 278 amino acids. Because of nucleotide substitutions, IS1031C and IS1031D differ from IS 1031A by 12.9% while IS1031C differs from IS1031D by only 0.6%. Hybridization analyses of total DNA from nine A. xylinum strains showed that all strains contained IS 1031-like elements varying in copy number from three to at least 16. None of three Acetobacter aceti strains examined contained IS1031-like elements. Taken together, the results suggest that A. xylinum contains a family of IS 1031 elements with considerably diversified nucleotide sequences.     

Identification and characterization of IS 1138, a transposable element from Mycoplasma pulmonis that belongs to the IS3 family

Insertion sequence (IS) elements are mobile genetic elements found in prokaryotes. We have identified a repetitive element from Mycoplasma pulmonis, a murine pathogen, that is similar to eubacterial IS elements. By subcloning a single strain of M. pulmonis, we isolated a variant clone in which the IS element had undergone an apparent transposition event. The nucleotide sequences of the element, designated IS 1138, and the target site into which it inserted were determined. IS1138 consists of 1288bp with 18bp perfect terminal inverted repeats. Sequence analysis of the target site before and after insertion of IS1138 identified a 3bp duplication of target DNA flanking the element. The predicted amino acids encoded by the major open reading frame of IS 1138 share significant similarity with the transposases of the IS3 family. Southern hybridization analysis indicates that repetitive sequences similar to IS 1138 are present in most, if not all, strains of M. pulmonis, but Is1138–like sequences were not detected in other mycoplasmal species.     

Gene activity of polytene chromosomes in Drosophila species of the obscura group

The polytene chromosome puffing patterns of Drosophila guanche were established and compared with those of Drosophila subobscura. A total of 150 loci, active in some of the 17 developmental stages studied, were described and 23 of them were found to form the characteristic puffing pattern of D. guanche. Taking into account the number of puffs as well as the gene activity of each chromosome and the total gene activity, D. guanche seems to be less active than D. subobscura. Although both species show a degree of homology in their puffing patterns lower than that found for sibling species, the degree of homology is stronger than that between species belonging to the same group but to different subgroups. Thus, D. guanche and D. subobscura must be considered as phylogenetically closely related species, belonging to the same subgroup.     

Isolation and characterization of IS 31831, a transposable element from Corynebacterium glutamicum

A transposable element from a coryneform bacterium, Corynebacterium glutamicum ATCC 31831 was isolated and characterized. The element IS 31831 is a 1453 bp insertion sequence with 24 bp imperfect terminal inverted repeats. It contains one open reading frame highly homologous at the amino acid level to the transposase of IS 1096 from Mycobacterium smeg-matis. Both IS 31831 and IS 1096 exhibit several common characteristics suggesting that they constitute a new family of insertion sequences. IS 31831 was isolated by taking advantage of the sucrose sensitivity of coryneform bacteria conferred by expression of the Bacillus subtilis sacB gene. An Escherichia coli/ Corynebacterium shuttle vector useful for the isolation of transposable elements from the coryneform group of bacteria was constructed.     

Two distinct P element subfamilies in the genome of Drosophila bifasciata

The genome of Drosophila bifasciata harbours two distinct subfamilies of P-homologous sequences, designated M-type and O-type elements based on similarities to P element sequences from other species. Both subfamilies have some general features in common: they are of similar length (M-type: 2935 bp, O-type: 2986 bp), are flanked by direct repeats of 8 by (the presumptive target sequence), contain terminal inverted repeats, and have a coding region consisting of four exons. The splice sites are at homologous positions and the exons have the coding capacity for proteins of 753 amino acids (M-type) and 757 amino acids (O-type). It seems likely that both types of element represent functional transposons. The nucleotide divergence of the two P element subfamilies is high (31%). The main structural difference is observed in the terminal inverted repeats. Whereas the termini of M-type elements consist of 31 by inverted repeats, the inverted repeats of the O-type elements are interrupted by non-complementary stretches of DNA, 12 by at the 5′ end and 14 by at the 3′ end. This peculiarity is shared by all members of the O-type subfamily. Comparison with other P element sequences indicates incongruities between the phylogenies of the species and the P transposons. M-type and O-type elements apparently have no common origin in the D. bifasciata lineage. The M-type sequence seems to be most closely related to the P element from Scaptomyza pallida and thus could be considered as a more recent invader of the D. bifasciata gene pool. The origin of the O-type elements cannot be unequivocally deduced from the present data. The sequence comparison also provides new insights into conserved domains with possible implications for the function of P transposons.     

Glider and Vision: Two New Families of Miniature Inverted-Repeat Transposable Elements in Xenopus Laevis Genome

We have characterised from Xenopus laevis two new short interspersed repetitive elements, we have named Glider and Vision, that belong to the family of miniature inverted-repeat transposable elements (MITEs). Glider was first characterised in an intronic region of the α-tropomyosin (α-TM) gene and database search has revealed the presence of this element in 10 other Xenopus laevis genes. Glider elements are about 150 bp long and for some of them, their terminal inverted repeats are flanked by potential target-site duplications. Evidence for the mobility of Glider element has been provided by the presence/absence of one element at corresponding location in duplicated α-TM genes. Vision element has been identified in the promoter region of the cyclin dependant kinase 2 gene (cdk2) where it is boxed in a Glider element. Vision is 284 bp long and is framed by 14-bp terminal inverted repeats that are flanked by 7-bp direct repeats. We have estimated that there are about 20,000 and 300 copies of Glider and Vision respectively scattered throughout the laevis genome. Every MITEs elements but two described in our study are found either in 5′ or in 3′ regulatory regions of genes suggesting a potential role in gene regulation. This revised version was published online in August 2006 with corrections to the Cover Date.     

An insertion sequence unique to Frankia strain ArI5

At the genetic level, understanding of symbiotic nitrogen fixation by Frankia is limited to nif functions that are highly conserved among all organisms. The genetics and biochemistry of nodulation are largely unexplored because of a complete lack of genetic tools. In other bacteria, mobile genetic elements such as insertion sequences (IS) and transposons are commonly used to create mutations and insert new genetic material. We have characterized a 4 kbp segment of DNA from Frankia strain ArI5 that has the hallmarks of a mobile genetic element, inverted repeats flanking a gene encoding a transposase. There are at least six copies of this element in strain ArI5 but none in either strain CcI3 or CpI1. The inverted repeats are 17 nt long and separated by 2156 bp. Within that region are two, overlapping ORFs that each encode a transposase. RT-PCR analysis of RNA from Frankia ArI5 cells conclusively demonstrates the expression of one transposase gene and suggests that both may be transcribed. Numerous attempts to clone the intact IS in E. coli were unsuccessful suggesting that the element may be unstable in this context. A clone containing the complete IS was constructed in E. coli then modified by insertion of the kanamycin (KAN) resistance gene from Tn5. A fragment of DNA including the inverted repeats, transposase genes and KAN gene, was transferred to the suicide vector pJBSD1. The construct, pFRISK, was transformed into E. coli to search for transposition events.     

The banding pattern of polytene chromosomes of Drosophila guanche compared with that of D. subobscura

A detailed map of the salivary gland chromosomes of Drosophila guanche is presented and compared to the standard gene arrangements of D. subobscura. Generally, the polytene chromosomc banding patterns of the two species show a high degrce of homology. Only Segment I of the sex chromosome (Chromosome A) shows marked differences. The banding pattern proposed for this segment in D. guanche could have originated from a cluster of overlapping inversions including A₁ arrangement.     

Chromosome homologies within the Drosophila obscura group probed by in situ hybridization

Probes specific to chromosome elements were used to investigate chromosome homologies between seven species of the Drosophila obscura group by in situ hybridization. Our results were in perfect agreement with the already established chromosome element homologies between D. subobscura, D. pseudoobscura, D. persimilis, and D. miranda. Furthermore, we were able to identify the chromosomal elements of D. obscura, D. ambigua, and D. subsilvestris. Of special interest was the localization of the two D. melanogaster-derived representatives of the tandemly repetitive genes, cDm500 and 12D8. In contrast to the findings with the element-specific probes, the localizations of the repetitive genes varied in the various species. Whereas D. melanogaster, D. subobscura, D. pseudoobscura, D. persimilis, and D. miranda showed only one strong block of label in the cross in situ hybridizations with cDm500, three labeling blocks were found on two elements for both D. ambigua and D. obscura. The two labeling blocks on one element occur in very close proximity, but are clearly separated in both species by cytologically detectable chromosomal material. We used the distribution of the cDm500 labeling sites to postulate a series of chromosomal rearrangements involved in the karyotype evolution of the analyzed species. Our results support the conclusion that the chromosomal elements retain their essential identity and that the observed gross structural rearrangements are due to fusions and paracentric or pericentric inversions. Cytologically obvious translocations were not recorded and are considered by us to be rare. The frequently occurring translocations of the tandemly repeated gene clusters observed in this study are probably due to a different mechanism, which may be an intrinsic property of this category of genes.This paper is dedicated to Prof. Hans Bauer on the occasion of his 80th birthday with our best wishes     

The role of vertical and horizontal transfer in the evolution of Paris-like elements in drosophilid species

The transposable element (TE) Paris was described in a Drosophila virilis strain (virilis species group) as causing a hybrid dysgenesis with other mobile genetic elements. Since then, the element Paris has only been found in D. buzzatii, a species from the repleta group. In this study, we performed a search for Paris-like elements in 56 species of drosophilids to improve the knowledge about the distribution and evolution of this element. Paris-like elements were found in 30 species from the Drosophila genus, 15 species from the Drosophila subgenus and 15 species from the Sophophora subgenus. Analysis of the complete sequences obtained from the complete available Drosophila genomes has shown that there are putative active elements in five species (D. elegans, D. kikkawai, D. ananassae, D. pseudoobscura and D. mojavensis). The Paris-like elements showed an approximately 242-bp-long terminal inverted repeats in the 5' and 3' boundaries (called LIR: long inverted repeat), with two 28-bp-long direct repeats in each LIR. All potentially active elements presented degeneration in the internal region of terminal inverted repeat. Despite the degeneration of the LIR, the distance of 185?bp between the direct repeats was always maintained. This conservation suggests that the spacing between direct repeats is important for transposase binding. The distribution analysis showed that these elements are widely distributed in other Drosophila groups beyond the virilis and repleta groups. The evolutionary analysis of Paris-like elements suggests that they were present as two subfamilies with the common ancestor of the Drosophila genus. Since then, these TEs have been primarily maintained by vertical transmission with some events of stochastic loss and horizontal transfer.     

The novel insertion sequences IS1417, IS1418, and IS1419 from Burkholderia glumae and their strain distribution

Three insertion sequences, IS1417, IS1418, and IS1419, were isolated from Burkholderia glumae (formerly Pseudomonas glumae), a gram-negative rice pathogenic bacterium, on the basis of their abilities to activate the expression of the neo gene of the entrap vector pSHI1063. The 1335-bp IS1417 element with 17-bp imperfect terminal inverted repeats was found to be flanked by 5-bp direct repeats of the vector sequence. IS1418 is 865 bp in length and carries 15-bp inverted repeats with a target duplication of 3 bp. The 1215-bp IS1419 sequence is bounded by the 36-bp terminal inverted repeats of the element and 7-bp direct repeats of the vector sequence. IS1417 and IS1418 belong to the IS2 subgroup of the IS3 family and the IS427 subgroup of the IS5 family, respectively, whereas IS1419 does not appear to be a member of any known IS family. Southern blot analysis of DNAs from B. glumae field isolates indicated that those IS elements are widely distributed, but the host range of the three IS elements appears to be limited to B. glumae and some other related species such as B. plantarii. The polymorphisms exhibited in B. glumae isolates suggest that those elements are useful for molecular epidemiological studies of B. glumae infections.     

The inverted repeats of IS<Emphasis Type="Italic">1384</Emphasis>, a newly described insertion sequence from<Emphasis Type="Italic"> Pseudomonas putida</Emphasis> strain H,represent the specific target for integration of IS<Emphasis Type="Italic">1383</Emphasis>

Analysis of a region on plasmid pPGH1 from Pseudomonas putida strain H that is flanked by two copies of IS1383 has revealed an additional element with the typical features of a bacterial insertion sequence. This new IS element, designated IS1384, contains a single ORF of 972 bp, and is flanked by 9-bp inverted repeats. Based on sequence homology and structural characteristics of the putative transposase it encodes, IS1384 belongs to the IS5 subgroup of the IS5 family. Two copies of IS1384 are present on plasmid pPGH1, whereas none could be detected on the chromosome of P. putida strain H. Sequence analysis revealed the presence of two truncated copies of IS1384 on the second plasmid in this strain, pPGH2. The inverted repeats of all IS1384 copies (including the truncated ones) are interrupted by the integration of an IS1383 element. All integrations were found to be site- and orientation-specific. PCR studies and sequence data indicate that IS1383 can form a circular intermediate on excision. In the circular form, the previously described 13-bp inverted repeats of IS1383 are separated by 10 bp that are identical to the 5-bp motif that flanks each side of the element when it is integrated in its target. We provide evidence that these additional nucleotides, although not of inverted symmetry, represent an essential part of the inverted repeats. Furthermore, the data indicate that IS1383 integrated into the inverted repeats of IS1384 by a site-specific recombination rather than a site-specific insertion event.     

The Corynebacterium glutamicum insertion sequence ISCg2 prefers conserved target sequences located adjacent to genes involved in aspartate and glutamate metabolism

An IS element, termed ISCg2, was identified in the chromosome of Corynebacterium glutamicum ATCC 13032. After screening a cosmid library of the C. glutamicum ATCC 13032 genome, six copies of ISCg2 including their flanking regions were sequenced and analyzed. ISCg2 is 1636 bp in length and has 26-bp imperfect inverted repeats flanked by 3-bp direct repeats. By comparisons with other IS elements, ISCg2 was classified as a member of the IS30 family of insertion sequences. The six copies of ISCg2 were identical at the nucleotide level and were located in intergenic, AT-rich regions of the chromosome. The regions in which the six copies of ISCg2 were inserted displayed significant similarities. This similarity extends over a region of 65 bp, which was assumed to be the target region for ISCg2. Interestingly, five of the six copies of ISCg2 were located adjacent to genes that may be involved in aspartate and glutamate metabolism or its regulation. Investigation of the distribution of ISCg2 showed that the IS element is restricted to certain C. glutamicum strains. Analysis of various integration regions indicates active transposition of ISCg2 in C. glutamicum. Received: 7 April 1999 / Accepted: 17 June 1999     

A transposon-like structure in the 5'' flanking sequence of a legumin gene from Pisum sativum

Summary The legumin storage proteins of Pisum sativum are coded for by a multigene family. An insertion element (Pis1) has been found integrated into the 5 flanking sequence of the legC legumin seed storage protein gene. This element contains all the sequence features of the CACTA family of insertion elements, has perfect 12 bp inverted repeats at its termini, and generates a target host site duplication upon integration. An 8 bp sequence within the left arm of the insertion element shows perfect homology to a sequence in the legC flanking region. Three stem-loop structures which can be formed within the element have the same stem sequence.     

The IS1111 family members IS4321 and IS5075 have subterminal inverted repeats and target the terminal inverted repeats of Tn21 family transposons

IS5075 and IS4321 are closely related (93.1% identical) members of the IS1111 family that target a specific position in the 38-bp terminal inverted repeats of Tn21 family transposons and that are inserted in only one orientation. They are 1,327 bp long and have identical ends consisting of short inverted repeats of 12 bp with an additional 7 bp (TAATGAG) or 6 bp (AATGAG) to the left of the left inverted repeats and 3 bp (AGA) or 4 bp (AGAT) to the right of the right inverted repeat. Circular forms of IS5075 and IS4321 in which the inverted repeats are separated by abutting terminal sequences (AGATAATGAG) were detected. A similar circular product was found for the related ISPa11. Transposition of IS4321 into the 38-bp target site was detected, but a flanking duplication was not generated. The precisely reconstituted target site was also identified. Over 50 members of the IS1111 family were identified. They encode related transposases, have related inverted repeats, and include related bases that lie outside these inverted repeats. In some, the flanking bases number 5 or 6 on the left and 4 or 3 on the right. Specific target sites were found for several of these insertion sequence (IS) elements. IS1111 family members therefore differ from the majority of IS elements, which are characterized by terminal inverted repeats and a target site duplication, and from members of the related IS110 family, which do not have obvious inverted repeats near their termini.     

Functional characterization of the prokaryotic mobile genetic element IS26

Summary IS26L and IS26R are the 820 bp long elements found as direct repeats at both ends of the kanamycin resistance transposon Tn2680. They can mediate cointegration in E. coli K12 which contains no IS26 in its chromosome. Cointegration occurs in rec ⁺ or recA ^- strains with similar frequency. Upon cointegration mediated by either IS26R or IS26L, the element is duplicated and integrated into one of many different sites. Both IS26L and IS26R carry 14 bp perfect terminal inverted repeats and generate 8 bp direct repeats at their target sequences. Deletion formation mediated by IS26R was also observed. These functional and structural features of IS26 are characteristic of a prokaryotic mobile genetic element.     

Characterization and distribution of two insertion sequences,IS1191 and iso-IS981, in Streptococcus thermophilus: does intergeneric transfer of insertion sequences occur in lactic acid bacteria co-cultures?

A chromosomal repeated sequence from Streptococcus thermophilus was identified as a new insertion sequence (IS), IS1191. This is the first IS element characterized in this species. This 1313 bp element has 28 bp imperfect terminal inverted repeats and is flanked by short direct repeats of 8bp. The single large open reading frame of IS1191 encodes a 391-amino-acid protein which displays homologies with transposases encoded by IS1201 from Lactobacillus helveticus (44.5% amino-acid sequence identity) and by the other ISs of the IS256 family. One of the copies of IS 1191 is inserted into a truncated iso-IS981 element. The nucleotide sequences of two truncated iso-IS981 s from S. thermophilus and the sequence of IS981 element from Lactococcus lactis share more than 99% identity. The distribution of these insertion sequences in L. lactis and S. thermophilus strains suggests that intergeneric transfers occur during co-cultures used in the manufacture of cheese.