Characteristics of replication of small colicinogenic plasmids

Specificity of small multicopy colicinogenic plasmids ColA, ColD, ColE2 and ColK replication has been compared with the one of ColE1 plasmid. Copy number for these plasmids per host cell has been estimated under the normal conditions of cellular growth and under the conditions of chloramphenicol-inhibited growth. DNA polymerase I and dnaB protein, an obligatory component for elongation step in replication, have been shown to be necessary for the plasmids replication. Initiation of plasmids replication has been demonstrated to be independent of dnaA and dnaC proteins. Replication of plasmid ColE2, being similar in its main features to replication of other plasmids from this group, has an important distinction. It requires de novo protein synthesis implying that ColE2 replicon may be different from ColA, ColD, ColK, ColE1 replicons. Thus study of the inducible A, D, K, El colicin synthesis coded by the corresponding plasmids has revealed the similarity regulation of genes, determining the synthesis of each of the mentioned colicins.     

Identification of functional regions of the colicinogenic plasmid ColA

Summary ColA is a colicinogenic plasmid of 6.72 kb. It is compatible with ColE1 but not with ColK. Transposon insertion mutagenesis as well as complementation studies have been carried out to investigate the location of the various functional regions of this plasmid. Four independent ColA::Tn1 and one ColA::Tn3 plasmids were isolated and the locations of insertions were determined. From these plasmids, six different deletion mutants were constructed. In addition, various restriction fragments of ColA have been cloned into pUC8 to carry out complementation studies. We have thus confirmed the location of the DNA regions involved in colicin production, colicin release and immunity function. The DNA region involved in conjugal mobility promoted by R64 drd11 has been identified and we have demonstrated that the ColE1 mobility proteins can act in trans on the bom (basis of mobility) site of ColA. The location of this site, as well as the region involved in stable maintenance of ColA, have also been determined. These results are discussed with regard to the homology in nucleotide sequence between ColA and ColE1.     

Structuro-functional organization of segments of Co1A plasmid DNA, determining its stable inheritance

Two par regions were localized within the structure of a small colicinogenic plasmid ColA. One of them functions at the expense of plasmid multimere resolution. Analysis of the nucleotide sequence of the region revealed the existence of essential homology with the par locus of plasmid ColE1. As compared to E. coli C600, the function of multimere forms' resolution of plasmid DNA in E. coli C is reduced or absent due to par regions of the ColE1 type. Par regions of various degrees of homology with the par locus of ColE1 were localized by Southern hybridization within the structure of colicinogenic plasmids ColN and ColD. The stabilization of the colicinogenic plasmids is believed to be also determined by the functioning of genes connected with the synthesis and action of colicin.     

Localization of genes responsible for replication and immunity to colicin A on plasmid ColA-CA31

The region containing the origin and regulatory sites for replication as well as the immunity gene (iaa) have been localized on the plasmid ColA-CA31. The region involved in replication functions of ColA can be hybridized with that of ColE1. It is located between 1 and 1 kb on the plasmid map previously published (Morlon et al. 1982a). A 0.50 Kb HincII fragment of ColA can be weakly hybridized to the ColE1 immunity region. This fragment contains iaa since directed in vitro mutagenesis at an internal restriction site can abolish the immunity to colicin A; however, it does not contain the entire iaa. Knowing the localization of regions involved in autonomous DNA replication and immunity, a mini-ColA plasmid was constructed that contains these two regions. The mini-ColA of 2.8 Kb can be amplified in the presence of chloramphenicol and confers the immunity to transformants. It thus constitutes a useful cloning vector. Expression of ColA and of the various constructed plasmids in the maxicell system suggests that the immunity protein has a molecular weight of about 18-20 Kd.     

The complete nucleotide sequence of the colicinogenic plasmid ColA. High extent of homology with ColE1

Summary The complete nucleotide sequence of the colicinogenic plasmid ColA has been determined. The plasmid DNA consists of 6720 bp (molecular weight 4.48×10⁶). Fifteen putative biological functions have been identified using the functional map previously determined. These include 11 genes and 3 DNA sites. Nine genes encode proteins of which 3 have been fully characterized. The replication region of ColA coding for RNAI and RNAII is highly homologous to that of ColE1 andClo DF13. The same holds true for the site-specific recombination region containing palindromic symmetry and involved in stable maintenance of the plasmids. A high percentage of homology has been detected for putative mobility proteins encoded by ColA and ColE1. The exclusion proteins are also highly homologous.     

A ColE1-encoded gene directs entry exclusion of the plasmid.

To detect entry exclusion of the ColE1 plasmid, we established an assay system that was not influenced by incompatibility of extant plasmids in the recipient cells or by the viability of the cells due to the killing action of colicin E1 protein. The assay revealed that exc1 and exc2, assigned as genes directing entry exclusion, had no exclusion activity. Instead, mbeD, which had been characterized as a gene for plasmid mobilization, directed the exclusion activity. MbeD was overexpressed and identified as a 35S-labeled protein, which was recovered in both the soluble and membrane fractions, particularly in the inner membrane fraction. An amphipathic helical structure was predicted in the N-terminal region of MbeD as well as in the corresponding homologous proteins of ColA and ColK. These proteins may bind to the inner membrane via the N-terminal amphipathic helix and function in entry exclusion.     

Incompatibility and transforming efficiency of ColE1 and related plasmids

Summary Replicons derived from the ColE1 plasmid are incompatible with one another, but are compatible with their naturally occurring relatives ColK and CloDF13. The incompatibility results in loss, by segregation, of one or the other ColE1 plasmid. In most cases, the smaller derivatives tend to displace the larger ones, and the rate of displacement depends on the difference in size. One mini-plasmid retains only 19% of the sequences of ColE1, yet it exrrts strong incompatibility: other ColE1 plasmids are rapidly lost when it is introduced into the host. The region essential for ColE1 incompatibility is deduced to lie within 700 base pairs of the origin of replication.The transforming efficiency of any ColE1 plasmid is markedly lowered when another incompatible replicon is resident in the competent cells, even when the transforming plasmid is much smaller than the resident.A model of incompatibility is proposed to account for these effects.     

RecA independent,site-specific recombination between ColE1 or ColK and a miniplasmid they complement for mobilization and relaxation: Implications for the mechanism of DNA transfer during mobilization

We report a novel type of recA independent recombination between plasmids ColE1 or ColK and a naturally occurring miniplasmid (pLG500). This miniplasmid can be complemented for mobilization and relaxation in the presence of ColE1 or ColK. Recombination between ColE1 and pLG500, or ColK and pLG500, was site-specific, and was only detected following the mobilization of these plasmids. The composite plasmids thus formed were stable, but recombination (resulting in dissociation of their component replicons) was again detected following mobilization. For ColE1, the site at which cointegration with pLG500 occurred was mapped to within 47 base pairs of the relaxation nicking site; for ColK, the recombination site was localized to the same region as its genetically defined transfer origin. The generation of these cointegrate plasmids is consistent with the hypothesis that mobilization entails relaxation nicking, transfer of the nicked single strand of DNA, and recircularization of the transferred single strand by ligation of 3′ and 5′ termini by the relaxation protein bound to the 5′ nick terminus. Since both plasmids are mobilized by the same proteins, their cointegration can be explained as a consequence of the ligation of the 5′ end of one plasmid to the 3′ end of the other, and vice versa.     

Construction and characterization of amplifiable multicopy DNA cloning vehicles derived from the P15A cryptic miniplasmid.

Construction and characterization of a class of multicopy plasmid cloning vehicles containing the replication system of miniplasmid P15A are described. The constructed plasmids have cleavage sites within antibiotic resistance genes for a variety of commonly employed site-specific endonucleases, permitting convenient use of the insertional inactivation procedure for the selection of clones that contain hybrid DNA molecules. Although the constructed plasmids showed DNA sequence homology with the ColE1 plasmid within the replication region, were amplifiable by chloramphenicol or spectinomycin, required DNA polymerase I for replication, and shared other replication properties with ColE1, they were nevertheless compatible with ColE1. P15A-derived plasmids were not self-transmissible and were mobilized poorly by Hfr strains; however, mobilization was complemented by the presence of a ColE1 plasmid within the same cell.     

Characterization of the ColE1 mobilization region and its protein products

Summary A third of the 6.6 kb genome of ColE1 is devoted to mobilization (mob) genes necessary to promote its specific transfer in the presence of conjugative plasmids. Themob region is genetically complex: twomob genes are entirely overlapped by a third. Oligonucleotide-directed mutagenesis was used to insert an amber codon into one of the overlapped genes and make possible a full complementation analysis ofmob. Fourmob genes essential for mobilization by R64drd11 were thus identified. Fragments ofmob were subcloned under control of the P_tac promoter in a suitable vector, overexpressed in minicells and the mobilization proteins visualized. A comprehensive alignment of themob region of ColE1 with those of its close relatives ColK and ColA demonstrating that the four essentialmob genes are conserved is also presented.     

Conjugal transfer of cloning vectors derived from ColE1.

The transfer properties of five cloning vectors derived from ColE1 were studied. Two of the vectors (pSF2124 and pGM706) behaved like wild type ColE1 in that they could be transferred efficiently in the presence of the conjugative plasmid F. The mobilization of the remaining three vectors (pMB9, PBR313 and pBR322) by F was barely detectable. The transfer defect in pBR313 and pBR322 could be complemented by ColK when R64drd11, but not F, was used as the conjugative plasmid. The transferred plasmids could be recovered unchanged from recipients. Conjugal transfer is a potentially useful technique for screening hybrid plasmids in low-risk cloning experiments involving poorly transformable strains.     

ColE1 plasmid incompatibility: localization and analysis of mutations affecting incompatibility.

Deletion mutants of plasmid ColE1 that involve the replication origin and adjacent regions of the plasmid have been studied to determine the mechanism by which those mutations affect the expression of plasmid incompatibility. It was observed that (i) a region of ColE1 that is involved in the expression of plasmid incompatibility lies between base pairs -185 and -684; (ii) the integrity of at least part of the region of ColE1 DNA between base pairs -185 and -572 is essential for the expression of ColE1 incompatibility; (iii) the expression of incompatibility is independent of the ability of the ColE1 genome to replicate autonomously; (iv) plasmid incompatibility is affected by plasmid copy number; and (v) ColE1 plasmid-mediated DNA replication of the lambda phage-ColE1 chimera lambda imm434 Oam29 Pam3 ColE1 is inhibited by ColE1-incompatible but not by ColE1-compatible plasmids.     

Re-examination of the ColE1 DNA regions essential for autonomous replication and their functions

Starting from pAO3, a plasmid consisting of a quarter of colicinogenic factor E1 (ColE1) DNA, various small ColE1 derivatives were constructed by in vitro recombination and their ability to achieve autonomous replication was examined. The 436 base pair HaeIII-C fragment of pAO3 contained information for replication when it was recombined with the non-replicating Amp fragment. However, when it was connected to other DNA fragments, the resulting hybrid molecules were not isolated as plasmids. The present results indicate that the additional region of about 240 base pairs next to the HaeIII-C fragment of ColE1 is also essential for the maintenance of a plasmid state. Moreover, using various small ColE1 derivatives, the DNA region responsible for the interference and incompatibility functions of ColE1 DNAs was located. The results indicate that the interference and incompatibility functions are coded by the same ColE1 DNA segment and are not essential for the maintenance of a plasmid state.     

Curing effect of clorobiocin on Escherichia coli plasmids

Summary Clorobiocin, an inhibitor of the gyrB subunit of DNA gyrase, was used for the curing of some Escherichia coli plasmids. Of the plasmids studied, ampicillin resistant R28K and a miniplasmid derived from R1 drd-19 were effectively eliminated. We also succeeded in eliminating the ColA factor from E. coli strain B834 (pBS103), which was resistant to the effect of currently used curing agents. Although a derivative of ColE1-pBR322 was effectively cured by clorobiocin, the ColE1-plasmid was resistant to its effect. The ColV plasmid determining virulence was effectively eliminated.     

Structural and functional organization of ColE2 and ColE3 replicons

Summary The complete nucleotide sequences of the 1.5 kb regions of ColE2 and ColE3 plasmids containing the segments sufficient for autonomous replication have been determined. They are quite homologous (greater than 90%), indicating that these two plasmids share common mechanisms of initiation of replication and its regulation. An open reading frame with a coding capacity for a protein of about 300 amino acids is present in both ColE2 and ColE3 and it actually specifies the Rep (for replication) protein, which is the plasmid specific trans-acting factor required for autonomous replication. The amino acid sequences of the Rep proteins of ColE2 and ColE3 are quite homologous (greater than 90%). The cis-acting sites (origins) where replication initiates in the presence of the trans-acting factors consist of 32 bp for ColE2 and 33 bp for ColE3. They are the smallest of all the prokaryotic replication origins so far reported. They are nonhomologous only at two positions, one of which, a deletion of a single nucleotide in ColE2 (or an insertion in ColE3), determines the plasmid specificity in interaction of the origins with the Rep proteins. Both plasmids carry a region with an identical nucleotide sequence and the one in ColE2, the IncA region, has been shown to express incompatibility against both ColE2 and ColE3. These results indicate that these plasmids share a common IncA determinant. A possibility that a small antisense RNA is involved in copy number control and incompatibility (IncA function) was suggested.     

Replication of ColE2 and ColE3 plasmids In vitro replication dependent on plasmid-coded proteins

Summary We developed an in vitro replication system for ColE2 and ColE3 plasmids using cell extracts prepared from bacteria with or without these plasmids. DNA synthesis depended on host DNA polymerase I and was sensitive to rifampicin and chloramphenicol. Preincubation of the extracts with plasmid DNA, however, allowed replication of template DNA added subsequently in a plasmid-specific manner in the presence of rifampicin and chloramphenicol. The plasmid-specified trans-acting factor(s) was detected in cell extracts from bacteria carrying a recombinant plasmid with the region of ColE2 or ColE3 encoding the Rep protein. The plasmid-specified factor(s) consisted at least in part of protein, probably the Rep protein. In vitro replication started within a region of ColE2 or ColE3 containing the smallest cis-acting segment essential for in vivo replication and proceeded in a fixed direction.