Thin-layer chromatographic collector-eluter.

A combination thin-layer chromatographic collector and elution apparatus is described. The device is designed to minimize manipulations and maximize accuracy and can be used for both analytical and small-scale preparative separations.     

Method for Simultaneous Measurement of Radioactive and Inactive CO(2) Evolved from Soil Samples During Incubation with Labeled Substrates

An apparatus is described which allows the simultaneous, continuous, and highly sensitive analysis of inactive and radioactive CO₂ evolved from ¹⁴C-supplemented soils or other materials. The apparatus consists of a control unit, a commercially available conductometric CO₂ analyzer, and fraction collector. A number of model experiments were conducted to demonstrate the potentials of the apparatus. These included analysis of the time course of priming action, when ¹⁴C-glucose was added to soil, separation of CO₂ respiration peaks caused by simultaneous degradation of radioactive and inactive soil supplements, and study of the effects of a fungicide, Benomyl, on degradation of ¹⁴C-labeled glucose. In the last experiment, partial degradation of the fungicide could also be followed.     

Method for Simultaneous Measurement of Radioactive and Inactive CO2 Evolved from Soil Samples During Incubation with Labeled Substrates

An apparatus is described which allows the simultaneous, continuous, and highly sensitive analysis of inactive and radioactive CO₂ evolved from ¹⁴C-supplemented soils or other materials. The apparatus consists of a control unit, a commercially available conductometric CO₂ analyzer, and fraction collector. A number of model experiments were conducted to demonstrate the potentials of the apparatus. These included analysis of the time course of priming action, when ¹⁴C-glucose was added to soil, separation of CO₂ respiration peaks caused by simultaneous degradation of radioactive and inactive soil supplements, and study of the effects of a fungicide, Benomyl, on degradation of ¹⁴C-labeled glucose. In the last experiment, partial degradation of the fungicide could also be followed.     

A simplified high-resolution gradient analysis system

A simplified high-performance, semiautomatic apparatus for the analysis and fractionation of density gradient preparations is described. In this system the gradient, mounted directly under a standard recording spectrophotometer, is displaced upwards through a vertical straight-path flow cell, then downward to a fraction collector.The resolution attainable with this apparatus is greater than that required for the high fidelity analysis of small volume centrifuged density gradients. The system is easily adaptable to cesium gradients, zonal rotors, and to chromatographic columns where its high-resolution, bubble-free performance makes practical the analysis of both small and large volumes. It is significantly simpler and less costly to construct than other apparatus of comparable performance.     

An MRI-based method to align the compressive loading axis for human cadaveric knees

There is a need to align the mechanical axis of the tibia with the axis of loading for studies involving tibiofemoral compression to interpret results and to ensure repeatability of loading within and among specimens. Therefore, the objectives of this study were (1) to develop a magnetic resonance imaging (MRI)-based alignment method for use with apparatuses applying tibiofemoral joint compression, (2) to demonstrate the usefulness of the method by aligning cadaveric knees in an apparatus that could apply tibiofemoral joint compression, and (3) to quantify the error associated with the alignment method. A four degree-of-freedom adjustable device was constructed to allow determination and alignment of the mechanical axis of the tibia of cadaveric knee joints with the axis of loading of an apparatus applying tibiofemoral joint compression. MRI was used to determine the locations of bony landmarks in three dimensions defining the mechanical axis of the tibia relative to an initial orientation of the four degree-of-freedom device. Adjustment values of the device were then computed and applied to the device to align the mechanical axis of the tibia with the axis of a compressive loading apparatus. To demonstrate the usefulness of the method, four cadaveric knees were aligned in the compressive loading apparatus. The vectors describing the mechanical axis of the tibia and the loading axis of the apparatus before and after adjustment of the four degree-of-freedom device were computed for each cadaveric knee. After adjustment of the four degree-of-freedom device, the mechanical axis of the tibia was collinear with the loading axis of the apparatus for each cadaveric knee. The errors in the adjustment values introduced by inaccuracies in the MR images were quantified using the Monte Carlo technique. The precisions in the translational and rotational adjustments were 1.20 mm and 0.90 deg respectively. The MR-based alignment method will allow consistent interpretation of results obtained during tibiofemoral compressive studies conducted using the apparatus described in this paper by providing a well-defined loading axis. The alignment method can also be adapted for use with other apparatuses applying tibiofemoral compression.     

A versatile gel casting cum electrophoresis apparatus

A simple apparatus for vertical.,in situ, polyacrylamide or agarose gel casting as well as for the subsequent electrophoresis is described. The apparatus is completely leakproof and does not require any special device like clamps, O-rings, gaskets, grease etc. for sealing. Slab gels of various thickness (0.04 to 1.0 cm) can be made and the apparatus can be used for analytical or preparative purposes. Gel rods can also be cast and run in the device. Forward as well as reverse polarity electrophoresis of a sample can be run simultaneously in the apparatus. NCL Communication No.: 3077.     

Multisample parallel array fraction collector: application in DNA alkaline elution studies

A fraction collector designed specifically to be compatible with the analytical techniques of alkaline and neutral elution of DNA from carcinogen-treated cells is described. This apparatus, which is operated by microchip controls, permits simultaneous collection of as many as 20 eluted samples directly into standard- or small-size scintillation vials contained in manufacturer's shipping cartons. This instrument saves operator time, offers considerable flexibility, and has several fail-safe features.     

Preparation of cell envelopes of large numbers of individual bacterial strains with the use of an automatic cell disruptor

Analysis of the cell envelopes of large numbers of bacterial strains is used for the epidemiological and taxonomic investigation of clinical, veterinarian, and ecological isolates. Isolation of cell envelopes requires lysis of the bacteria. We developed an apparatus to disrupt bacterial cells of 200 different isolates in suspension by ultrasonication automatically. It is composed of modified standard laboratory equipment (fraction collector, cooling unit, pump), a standard ultrasonifier, and a newly designed control unit, which includes a sampler. This apparatus was applied to the analysis of cell envelope proteins of 96 Haemophilus influenzae strains on sodium dodecyl sulfate-polyacrylamide gel electrophoresis within 3 days after the first culture.     

Improved stop-flow apparatus to measure permeability of human red cells and ghosts

An improved stop-flow apparatus has been designed and constructed to measure the permeability characteristics of human red cells, which can be inferred from the time course of red cell volume changes following a sudden change in cellular environment produced by a rapid mixing device. The improved apparatus is directly coupled to a computer which automates thesubtraction and averaging procedures that have been developed to minimize the noise generated in the system by the cessation of red cell forward motion when the flow is suddenly stopped. Real time data acquisition also makes it possible to increase the number of data points by an order of magnitude, thus improving accuracy significantly. The apparatus has been tested by measurements of the human red cel hydraulic permeability coefficient. Data are presented to validate the subtraction procedure. Experiments have also been carried out on red cell ghosts which indicate that the hydraulic conductivity of the ghost is similar to that of the undisturbed red cell.     

An improved Method for Isolation of Rat Testis Golgi Apparatus H. H. Mollenhauer

The preparation of Golgi apparatus fractions from rat testis germ cells free from contamination by residual body fragments was accomplished by the use of the Yeda press as the homogenization device. The Golgi apparatus thus prepared retained excellent stuctural intactness. This method also allows for isolation of Golgi apparatus from single cell suspensions.     

Design and operation of a simple continuous-culture apparatus

A versatile and simple continuous-culture apparatus is described. With this apparatus, independent control of limiting growth factors and other nutrilites is possible and the conditions of each experiment are reproducible. In view of the synchronized speed of the feeder syringes, flow variation troubles are not encountered. The device allows the performance of growth experiments at different dilution rates simultaneously in a single run which makes the comparison of the results more reliable. The operation of the device has been tested successfully with a study of adenine deaminase induction in yeast.     

Hemolytic potential of hydrodynamic cavitation

The purpose of this study was to determine the hemolytic potentials of discrete bubble cavitation and attached cavitation. To generate controlled cavitation events, a venturigeometry hydrodynamic device, called a Cavitation Susceptibility Meter (CSM), was constructed. A comparison between the hemolytic potential of discrete bubble cavitation and attached cavitation was investigated with a single-pass flow apparatus and a recirculating flow apparatus, both utilizing the CSM. An analytical model, based on spherical bubble dynamics, was developed for predicting the hemolysis caused by discrete bubble cavitation. Experimentally, discrete bubble cavitation did not correlate with a measurable increase in plasma-free hemoglobin (PFHb), as predicted by the analytical model. However, attached cavitation did result in significant PFHb generation. The rate of PFHb generation scaled inversely with the Cavitation number at a constant flow rate, suggesting that the size of the attached cavity was the dominant hemolytic factor.     

Construction and application of a modified “gene machine”: A circular concentrating preparative gel electrophoresis device employing discontinuous elution

A modified version of a preparative circular gel electrophoresis apparatus, first described by Edwin Southern (Medical Research Council, University of Edinburgh, Edinburgh, Scotland), has been constructed. The apparatus fractionates a large volume of sample into concentric bands which migrate toward a small circular collection chamber. Samples exiting the gel into the collection chamber are concentrated against a dialysis membrane which encloses the inner electrode and are pumped from this center chamber into a fraction collector at fixed time intervals. The apparatus has been employed to fractionate samples of DNA (10 mg) by electrophoresis through either agarose or acrylamide gels. Two examples of nucleic acids which have been successfully fractionated are given: restriction endonuclease cleavage fragments of total soybean DNA, and a heterogeneous mixture of covalently closed circular plasmid DNA from Bacillus megaterium. Franctionated DNA is suitable for molecular cloning directly from acrylamide and, after one additional treatment, from agarose. The run time for DNA treated with restriction endonuclease is from 24 to 48 h. Purification of 60- to 200-fold is common for a DNA restriction fragment from a total genome.     

Rearing and maintenance of plecopteran nymphs

Summary A device for rearing and maintenance of Plecopterans was designed and constructed. This apparatus is satisfactory for rearing other aquatic species. A desired water temperature and current velocities can be achieved in the apparatus.     

Modified procedure for recovery of Giardia cysts from diverse water sources

L. BIELEC, T.C. BOISVERT AND S.G. JACKSON. 1996. A compact battery-operated, portable field filtration apparatus was developed for efficient recovery of parasites, including Giardia lamblia cysts, from large volumes of water. In conjunction with modified filter elution and processing procedures, the filtration device was evaluated in field trials. To monitor performance of the procedure, a known number of Giardia lamblia cysts were added during filtrations through a control injection assembly. This allowed calculation of cyst recovery at each test site, thereby allowing comparison of percentage recoveries from many diverse water sources. This apparatus and modified method now provide the tools to investigate further extraction and purification techniques to improve overall yield of Giardia lamblia , other parasites and potentially other organisms such as bacteria and viruses.     

Electrospinning Fundamentals: Optimizing Solution and Apparatus Parameters

Electrospun nanofiber scaffolds have been shown to accelerate the maturation, improve the growth, and direct the migration of cells in vitro. Electrospinning is a process in which a charged polymer jet is collected on a grounded collector; a rapidly rotating collector results in aligned nanofibers while stationary collectors result in randomly oriented fiber mats. The polymer jet is formed when an applied electrostatic charge overcomes the surface tension of the solution. There is a minimum concentration for a given polymer, termed the critical entanglement concentration, below which a stable jet cannot be achieved and no nanofibers will form - although nanoparticles may be achieved (electrospray). A stable jet has two domains, a streaming segment and a whipping segment. While the whipping jet is usually invisible to the naked eye, the streaming segment is often visible under appropriate lighting conditions. Observing the length, thickness, consistency and movement of the stream is useful to predict the alignment and morphology of the nanofibers being formed. A short, non-uniform, inconsistent, and/or oscillating stream is indicative of a variety of problems, including poor fiber alignment, beading, splattering, and curlicue or wavy patterns. The stream can be optimized by adjusting the composition of the solution and the configuration of the electrospinning apparatus, thus optimizing the alignment and morphology of the fibers being produced. In this protocol, we present a procedure for setting up a basic electrospinning apparatus, empirically approximating the critical entanglement concentration of a polymer solution and optimizing the electrospinning process. In addition, we discuss some common problems and troubleshooting techniques.     

Mechanical properties vary for different regions of the finger extensor apparatus

The extensor apparatus, an aponeurosis that covers the dorsal side of each finger, transmits force from a number of musculotendons to the phalanges. Multiple tendons integrate directly into the structure at different sites and the extensor apparatus attaches to the phalanges at multiple points. Thus, prediction of the force distribution within the extensor apparatus, or hood, and the transmission to the phalanges is challenging, especially as knowledge of the underlying mechanical properties of the tissue is limited. We undertook quantification of some of these properties through material testing of cadaver specimens. We punched samples at specified locations from 19 extensor hood specimens. Material testing was performed to failure for each sample with a custom material testing device. Testing revealed significant differences in ultimate load, ultimate strain, thickness, and tangent modulus along the length of the extensor hood. Specifically, thickness, ultimate load, and ultimate strain were greater in the more proximal sections of the extensor hood, while the tangent modulus was greater in the more distal sections. The variations in mechanical properties within the hood may impact prediction of force transmission and, thus, should be considered when modeling the action of the extensor apparatus. Across the extensor hood, tangent modulus values were substantially smaller than values reported for other soft tissues, such as the Achilles tendon and knee ligaments, while ultimate strains were much greater. Thus, the tissue in the extensor apparatus seems to have greater elasticity, which should be modeled accordingly.     

A device to measure cutaneous temperature sensitivity in humans and subhuman species.

A device is described to maintain restricted areas of skin at any temperature between 5 and 45 degrees C. Changes in temperature of controlled intensity up to 10 degrees C at rates from 0.03 degrees C to 2 degrees C/s can be delivered in either the warm or cool directions. The stimulator, which is in contact with the skin, is sufficiently simple so that a number of them can be constructed, each with a different contact area up to 18.2 cm2. The current control apparatus that operates a Peltier device in the stimulator is a feedback control system that maintains a precisely controlled temperature at the stimulator-skin interface. Safety features make it suitable and safe for use in human psychophysical studies and subhuman behavioral measurements of temperature sensitivity. Electrostatic shielding makes it compatible with the electronic instruments used in electrophysiological studies of the temperature sense.     

Design of an MRI-compatible robotic stereotactic device for minimally invasive interventions in the breast

The objective of this work was to develop a robotic device to perform biopsy and therapeutic interventions in the breast with real-time magnetic resonance imaging (MRI) guidance. The device was designed to allow for (i) stabilization of the breast by compression, (ii) definition of the interventional probe trajectory by setting the height and pitch of a probe insertion apparatus, and (iii) positioning of an interventional probe by setting the depth of insertion. The apparatus is fitted with five computer-controlled degrees of freedom for delivering an interventional procedure. The entire device is constructed of MR compatible materials, i.e. nonmagnetic and non-conductive, to eliminate artifacts and distortion of the MR images. The apparatus is remotely controlled by means of ultrasonic motors and a graphical user interface, providing real-time MR-guided planning and monitoring of the operation. Joint motion measurements found probe placement in less than 50 s and sub-millimeter repeatability of the probe tip for same-direction point-to-point movements. However, backlash in the rotation joint may incur probe tip positional errors of up to 5 mm at a distance of 40 mm from the rotation axis, which may occur for women with large breasts. The imprecision caused by this backlash becomes negligible as the probe tip nears the rotation axis. Real-time MR-guidance will allow the physician to correct this error Compatibility of the device within the MR environment was successfully tested on a 4 Tesla MR human scanner     

大鼠脑损伤后非损伤区域缺氧诱导因子与乳酸的变化研究

目的:研究大鼠脑损伤后非损伤区域缺氧诱导因子(hypoxia-inducible factor-1α,HIF-1α)与乳酸的表达变化。方法:取雄性SD大鼠36只,体重200-300g,参照统计学随机数字表将大鼠随机平均分为正常对照组(6只)、假手术组(6只)、造模组(24只),3组,造模组分四个时间点12h、72h、1w、2w处死动物(每时间点6只)。使用立体定位仪和液压打击装置,靶向打击大脑中动脉,造大鼠脑外伤模型。采用免疫组织化学法检测脑外伤后不同时间点损伤临近区域脑组织中HIF-1α蛋白表达及乳酸含量的变化。结果:正常组和假手术组脑组织神经细胞HIF-1α表达和乳酸含量无明显变化,而模型组损伤临近区域HIF-1α的表达及乳酸含量的变化规律基本一致,12 h时增多,72h时达到高峰,1w表达下降至2w时恢复正常。造模组12h、72h、1w3个亚组与正常对照组比较差异具有统计学意义p<0.01,造模组2w亚组与正常对照组比较差异无统计学意义p>0.01。结论:脑外伤后非损伤区域也有缺血、缺氧的改变,可能与脑外伤后的脑萎缩有相关性。