序列特异的三锌指多肽的构建及其在大肠杆菌中的表达

在获得单一锌指突变体的基础上,以小鼠转录因子Zif268的三锌指DNA结合区为模板,利用重叠(Over-lap)PCR技术,获得了关键氨基酸位点同时突变的三锌指突变体ZF123、2ZF123。ZF123、2ZF123分别克隆进pUC-18质粒,序列测定正确后,以pGEX-2T为表达质粒,在大肠杆菌JM109中实现了功能性的表达。经SDS-PAGE分析,表达出了分子量34.0kD的融合蛋白,扫描分析其含量在20%左右。菌体经超声波破碎后,对可溶性融合蛋白进行了纯化得到了游离的目的蛋白,为进一步的DNA结合特性分析、杂交转录因子的构建等奠定了基础。     

人工锌指核酸酶的设计与表达纯化

设计表达了四个锌指核酸酶,用于切断人基因组中的rRNA基因家族的内部转录间隔序列,造成双链断裂,以此提高针对多位点基因打靶的效率,为后续基因打靶应用于基因治疗研究奠定基础。首先,在人rRNA基因家族ITS1序列中找到两个合适的9 bp长的序列(中间间隔6 bp)为锌指蛋白识别位点,根据识别位点序列每个位点分别设计两个三锌指蛋白。通过设计引物进行重叠延伸PCR得到全长编码锌指蛋白的DNA,分别克隆到表达载体pET-28a（+）,构建重组质粒pET28a-ZFP,转化大肠杆菌RossettaTM（DE3）,实现带组氨酸标签的锌指融合蛋白的表达与纯化。同时,将限制性内切酶Fok I的切割结构域分别与四个锌指蛋白序列采用PCR拼接后克隆到表达载体pET-28a（+）,构建重组质粒pET28a-ZFN,转化到大肠杆菌RossettaTM（DE3）,实现带组氨酸标签的锌指核酸酶融合蛋白的表达并纯化。     

锌指蛋白的核酸识别特异性研究进展

锌指蛋白是最大的DNA结合蛋白,它能和DNA进行特异性识别,是研究蛋白—DNA相互作用的理想对象。改变锌指元件上的几个保守的氨基酸位点可设计筛选出序列特异的全新锌指蛋白,计算机在锌指蛋白设计方面的应用,使得全新的锌指蛋白识别特异性明显增强。这在基因治疗等方面,具有广阔的应用前景。     

锌指蛋白的核酸识别特异性研究进展

锌指蛋白是最大的DNA结合蛋白,它能和DNA进行特异性识别,是研究蛋白－DNA相互作用的理想对象。改变锌指元件上的几个保守的氨基酸位点可设计筛选出序列特异的全新锌指蛋白,计算机在锌指蛋白设计方面的应用,使得全新的锌指蛋白识别特异性明显增强。这在基因治疗等方面,具有广阔的应用前景。     

真核生物中锌指蛋白的结构与功能

真核生物中的许多蛋白质分子包含锌指结构区,这类蛋白称为锌指蛋白.锌指蛋白因其包含特殊的指状结构,在对DNA、蛋白质和RNA的识别和结合中起重要作用.许多锌指蛋白的锌指结构域包含能与DNA特异结合的区域,并与某些效应结构域（如KRAB、SCAN、BTB/POZ、SNAG、SANT和PLAG等）相连,这类锌指蛋白常作为转录因子起作用,可调控靶基因的转录.一些锌指蛋白包含蛋白质识别结构域（如LIM锌指、MYND锌指、PHD锌指和RING锌指等）,它们能够特异地介导蛋白质之间的相互作用,因此被称作蛋白适配器.此外,某些锌指蛋白还可以结合RNA,起转录后调控作用.本文就锌指蛋白与DNA、RNA以及蛋白质分子间的相互作用作一综述.     

锌指蛋白与心脏发育

锌指是最大的DNA结合蛋白家族,是最普遍的核酸识别元件.近年来发现锌指参与生物体的基因转录,复制及蛋白质的合成等各种基因调节和控制过程,心脏发育过程中涉及大量锌指基因.综述了心脏发育过程中起重要调控作用的锌指蛋白以及它们的作用机制.     

锌指蛋白及人工锌指蛋白对微生物代谢影响的研究进展

锌指蛋白由于锌指结构域序列相对保守,识别DNA序列具有高度特异性,所以成为研究较广泛的DNA结合蛋白,但目前对锌指蛋白的研究多集中在真核细胞,而对微生物锌指蛋白,尤其是原核微生物锌指蛋白的研究相对较少。本文综述了近年来微生物锌指蛋白,尤其是原核微生物锌指蛋白的发现及功能的最新研究进展,以及人工锌指蛋白技术在微生物菌株改造中的应用。特定人工锌指蛋白不仅可调控微生物细胞中多基因控制的复杂性状,例如耐热性、乙醇和丁醇耐性、渗透胁迫耐受性等,还可以利用锌指结构域构建DNA脚手架系统,进而构建复合酶系统,从而提高催化效率和代谢物产量。目前报道的用于微生物代谢调控的人工锌指蛋白利用的都是哺乳动物的基因,未来根据不同微生物中天然锌指蛋白的序列进行人工锌指的设计,将拓展人工转录因子技术在微生物全局基因表达调控中的应用。     

锌指结构：最普遍的核酸识别元件

锌指是最大的DNA结合蛋白家庭,是识别DNA最有效、最成功的一种结构元件。其模块性结构特点及与核酸作用的相对简单性,使其成为研究蛋白-核酸相互作用的理想材料,以及人为设计筛选新的核酸结合蛋白的最佳元件。     

锌指蛋白的设计及其应用

人工设计的锌指蛋白一般包括两个结构域：DNA结合结构域和效应结构域。DNA结合结构域主要采用对DNA序列特异性识别结合的C2H2型锌指结构域,而功能结构域常常采用某些转录激活结构域、转录抑制结构域或某些酶的活性结构域。这样进行设计的锌指蛋白就可以在特定的核酸序列上行使相应的功能,这对于目的基因的表达调控及蛋白质与核酸的相互作用研究提供了新的思路。     

特异识别HIV-1序列的锌指蛋白的表达纯化及其在Biacore CM-5芯片上的固定

目的:为了更好地利用Biacore 3000研究锌指与核酸的相互作用,将特异性识别HIV-15′端一段保守序列的三锌指蛋白固定在CM-5芯片上。方法:将特异性识别HIV-15′端一段保守序列5′-CTGTGTTTG-3′的三锌指基因克隆到表达载体pET-22b( )中,转化大肠杆菌BL21(DE3)菌株,经IPTG诱导表达重组三锌指蛋白,超声碎菌进行SDS-PAGE分析;包涵体形式的表达产物用盐酸胍溶解后,经一步凝胶柱复性并纯化;随后摸索适宜固定的pH值并通过化学方法进行固定。结果:表达的重组蛋白主要以包涵体形式存在于超声沉淀中,纯化及柱复性后的蛋白纯度为98.8%,并在CM-5芯片上成功固定。结论:本研究为利用Biacore实时定量研究锌指蛋白与其识别DNA的相互作用进行了尝试。     

Structure of a designed dimeric zinc finger protein bound to DNA

Proteins that employ dimerization domains to bind cooperatively to DNA have a number of potential advantages over monomers with regards to gene regulation. Using a combination of structure-based design and phage display, a dimeric Cys(2)His(2) zinc finger protein has been created that binds cooperatively to DNA via an attached leucine zipper dimerization domain. This chimera, derived from components of Zif268 and GCN4, displayed excellent DNA-binding specificity, and we now report the 1.5 A resolution cocrystal structure of the Zif268-GCN4 homodimer bound to DNA. This structure shows how phage display has annealed the DNA binding and dimerization domains into a single functional unit. Moreover, this chimera provides a potential platform for the creation heterodimeric zinc finger proteins that can regulate a desired target gene through cooperative DNA recognition.     

Soluble expression and purification of tumor suppressor WT1 and its zinc finger domain

Full length murine WT1 and its zinc finger domain were separately inserted into Escherichia coli expression vectors with various fusion tags on either terminus by Gateway technology (Invitrogen) and expression of soluble protein was assessed. Fusion proteins including the four zinc finger domains of WT1 were used to optimize expression and purification conditions and to characterize WT1:DNA interactions in the absence of WT1:WT1 interactions. Zinc finger protein for in vitro characterization was prepared by IMAC purification of WT1 residues 321-443 with a thioredoxin-hexahistidine N-terminal fusion, followed by 3C protease cleavage to liberate the zinc fingers and cation exchange chromatography to isolate the zinc fingers and reduce the level of the truncated forms. Titration of zinc finger domain with a binding site from the PDGFA promoter gave a K(d) of 100±30nM for the -KTS isoform and 130±40nM for the +KTS isoform. The zinc finger domain was also co-crystallized with a double-stranded DNA oligonucleotide, yielding crystals that diffract to 5.5?. Using protocols established for the zinc finger domain, we expressed soluble full-length WT1 with an N-terminal thioredoxin domain and purified the fusion protein by IMAC. In electro-mobility shift assays, purified full-length WT1 bound double-stranded oligonucleotides containing known WT1 binding sites, but not control oligonucleotides. Two molecules of WT1 bind an oligonucleotide presenting the full PDGFA promoter, demonstrating that active full-length WT1 can be produced in E. coli and used to investigate WT1 dimerization in complex with DNA in vitro.     

An arginine residue instead of a conserved leucine residue in the recognition helix of the finger 3 of Zif268 stabilizes the domain structure and mediates DNA binding

The Cys(2)His(2)-type zinc finger is a common DNA binding motif that is widely used in the design of artificial zinc finger proteins. In almost all Cys(2)His(2)-type zinc fingers, position 4 of the α-helical DNA-recognition site is occupied by a Leu residue involved in formation of the minimal hydrophobic core. However, the third zinc finger domain of native Zif268 contains an Arg residue instead of the conserved Leu. Our aim in the present study was to clarify the role of this Arg in the formation of a stable domain structure and in DNA binding by substituting it with a Lys, Leu, or Hgn, which have different terminal side-chain structures. Assessed were the metal binding properties, peptide conformations, and DNA-binding abilities of the mutants. All three mutant finger 3 peptides exhibited conformations and thermal stabilities similar to the wild-type peptide. In DNA-binding assays, the Lys mutant bound to target DNA, though its affinity was lower than that of the wild-type peptide. On the other hand, the Leu and Hgn mutants had no ability to bind DNA, despite the similarity in their secondary structures to the wild-type. Our results demonstrate that, as with the Leu residue, the aliphatic carbon side chain of this Arg residue plays a key role in the formation of a stable zinc finger domain, and its terminal guanidinium group appears to be essential for DNA binding mediated through both electrostatic interaction and hydrogen bonding with DNA phosphate backbone.     

Keep Your Fingers Off My DNA: Protein–Protein Interactions Mediated by C2H2 Zinc Finger Domains

Cys2-His2 (C2H2) zinc finger domains (ZFs) were originally identified as DNA-binding domains, and uncharacterized domains are typically assumed to function in DNA binding. However, a growing body of evidence suggests an important and widespread role for these domains in protein binding. There are even examples of zinc fingers that support both DNA and protein interactions, which can be found in well-known DNA-binding proteins such as Sp1, Zif268, and Ying Yang 1 (YY1). C2H2 protein–protein interactions (PPIs) are proving to be more abundant than previously appreciated, more plastic than their DNA-binding counterparts, and more variable and complex in their interactions surfaces. Here we review the current knowledge of over 100 C2H2 zinc finger-mediated PPIs, focusing on what is known about the binding surface, contributions of individual fingers to the interaction, and function. An accurate understanding of zinc finger biology will likely require greater insights into the potential protein interaction capabilities of C2H2 ZFs.     

Binding studies with mutants of Zif268. Contribution of individual side chains to binding affinity and specificity in the Zif268 zinc finger-DNA complex.

The Zif268 zinc finger-DNA complex has served as a model system for understanding how Cys2His2 type zinc fingers recognize DNA. Structural studies of the Zif268-DNA complex revealed that residues at four positions in the alpha helix of each zinc finger play key roles in recognition, but there has been no information about the precise contributions of individual residues. Here we report the results of binding studies involving five mutants of Zif268 that have changes in the base-contacting residues of finger one. These studies let us evaluate the contributions that Arg18 (position -1 of the alpha helix), Asp20 (position 2), Glu21 (position 3), and Arg24 (position 6) make to the overall energy of DNA binding. Our results confirm the important role played by these arginines. By comparing the affinities of the wild type and mutant peptides for various sites, we also prove that Asp20 and Glu21 play important roles in determining binding site specificity.