Study of the stability of hybrid plasmids replicating in Saccharomyces cerevisiae due to DNA fragments from polyoma virus

Hybrid plasmid pSP97 carrying the entire genome of polyoma virus (PY), inserted into bacterial vector psV3, transforms yeast cells with the frequency 1 x 10(-2). Plasmid pSP97 is capable of autonomous replication in S. cerevisiae, while its structure remains unaltered, the stability of hybrid plasmid in transformants is 44%--100%. Plasmid pSP155 consisting of Ori-containing DNA segment from polyoma, pBR322 and yeast gene arg4, transforms yeast cells with the frequency 5 x 10(-3), the stability of plasmid in transformants is 23%--29%. Two types of plasmids were isolated from transformants: one was identical to SP155, while the another differed structurally and phenotypically from SP155. Plasmids pSP113 and pSP114, in addition to pBR322 and yeast gene arg4, contain a viral DNA segment that encodes genes from small and middle T-antigens. These plasmids transform yeast cells with low frequency (2 x 10(-4), 3 x 10(-5)), the stability of plasmids in yeast transformants is 100%. However, hybrid plasmids identical to pSP113 were isolated from transformants. Structural rearrangements have been observed in pSP114, which carries the arg4 gene in reversed orientation compared to pSP113.     

Patterns of integration of DNA microinjected into cultured mammalian cells: evidence for homologous recombination between injected plasmid DNA molecules.

We examined the fate of DNA microinjected into nuclei of cultured mammalian cells. The sequence composition and the physical form of the vector carrying the selectable gene affected the efficiency of DNA-mediated transformation. Introduction of sequences near the simian virus 40 origin of DNA replication or in the long terminal repeat of avian sarcoma provirus into a recombinant plasmid containing the herpes simplex virus thymidine kinase gene. (pBR322/HSV-tk) enhanced the frequency of transformation of LMtk- and RAT-2tk- cells to the TK+ phenotype 20- to 40-fold. In cells receiving injections of only a few plasmid DNA molecules, the transformation frequency was 40-fold higher after injection of linear molecules than after injection of supercoiled molecules. By controlling the number of gene copies injected into a recipient cell, we could obtain transformants containing a single copy or as many as 50 to 100 copies of the selectable gene. Multiple copies of the transforming gene were not scattered throughout the host genome but were integrated as a concatemer at one or a very few sites in the host chromosome. Independent transformants contained the donated genes in different chromosomes. The orientation of the gene copies within the concatemer was not random; rather, the copies were organized as tandem head-to-tail arrays. By analyzing transformants obtained by coinjecting two vectors which were identical except that in one a portion of the vector was inverted, we were able to conclude that the head-to-tail concatemers were generated predominantly by homologous recombination. Surprisingly, these head-to-tail concatemers were found in transformants obtained by injecting either supercoiled or linear plasmid DNA. Even though we demonstrated that cultured mammalian cells contain the enzymes for ligating two DNA molecules very efficiently irrespective of the sequences or topology at their ends, we found that even linear plasmid DNA was recruited into the concatemer by homologous recombination.     

Isolation of physarum DNA segments that support autonomous replication in yeast

Summary Hybrid plasmids containing the bacterial resistance-transfer factor pBR322 and the yeast leu2 ⁺gene have been used to isolate DNA fragments of Physarum that are capable of initiating DNA replication in a yeast host. Five of forty hybrid plasmids containing Physarum sequences transform leu2 ^-yeast to Leu⁺ at high frequency. The resulting Leu⁺ transformants are characterized by phenotypic instability. Supercoiled plasmid molecules containing pBR322 sequences can be detected in the transformed yeast, indicating that the transforming DNA replicates autonomously. Plasmid DNA isolated from Leu⁺ yeast can transform leuB bacteria. The hybrid plasmid recovered from the Leu⁺ bacterial transformants is identical to the original plasmid, indicating structural integrity is maintained during passage through the yeast host. These hybrid plasmids containing Physarum sequences have the same characteristics as those containing autonomously replicating yeast chromosomal sequences. As the temporal sequence of DNA replication is particularly accessible to study in Physarum plasmodia, the functional significance of these segments should be amenable to study.     

Cloning, mapping and molecular analysis of the pyrG (orotidine-5'-phosphate decarboxylase) gene of Aspergillus nidulans

We have modified the transformation procedures of Ballance et al. [Biochem. Biophys. Res. Commun. 112 (1983) 284-289] to give increased rates of transformation in Aspergillus nidulans. With the modified procedures we have been able to complement pyrG89, a mutation in the orotidine-5'-phosphate decarboxylase gene of A. nidulans, by transformation with a library of wild-type (wt) sequences in pBR329. We have recovered, by marker rescue from one such transformant, a plasmid (pJR15) that carries an A. nidulans sequence that complements pyrG89 efficiently. In three experiments, this plasmid gave an average of 1985 stable transformants/micrograms of transforming DNA. We have analyzed ten of these genetically and by Southern hybridization. In five transformants a single copy of the transforming plasmid had integrated at the pyrG locus, in one transformant several copies of pJR15 had integrated at this locus, in one transformant several copies of the plasmid had integrated into other sites, and in three transformants, the wt allele had apparently replaced the mutant allele with no integration of pBR329 sequences. Sequence and S1 nuclease protection analysis revealed that pJR15 contains a gene that predicts an amino acid sequence with regions of strong homology to the orotidine-5'-phosphate decarboxylases of Neurospora crassa and Saccharomyces cerevisiae. We conclude that this gene is the wt pyrG allele. Finally, we have compared the 5'- and 3'-noncoding sequences and intron splice sequences to other genes of A. nidulans and have mapped the pyrG locus to a region between the fpaB and galD loci on linkage group I.     

Efficient transformation of Serratia marcescens with pBR322 plasmid DNA

Eight Serratia marcescens strains tested could be transformed with the plasmid pBR322. Transformants were selected on the basis of resistance to high levels of ampicillin (400 to 500 micrograms/ml). For six of the strains, the CaCl2- mediated transformation procedure developed for Escherichia coli was successful. For the other two strains, no transformants were obtained with the CaCl2-mediated transformation procedure unless the cells first received a heat treatment. Transformation frequency was dependent on DNA concentration, and no transformation was detected with linear pBR322 DNA. The stability and copy number of pBR322 were similar in S. marcescens and E. coli. As in E. coli, the pBR322 DNA was amplified in S. marcescens after inhibition of proteins synthesis. Based on these results, cloning in S. marcescens should be possible and pBR322 should be a useful cloning vehicle.     

Molecular cloning of the ADE1 gene of Saccharomyces cerevisiae and stability of the transformants

Plasmid YEp(ADE1)1a, containing a 2.7-kb Sau3A fragment of Saccharomyces cerevisiae DNA inserted at the BamHI site of the yeast shuttle vector pBTI-1 (Morris et al., 1981), results in high frequency, unstable transformation of ade1 yeast strains. A second plasmid, YRp(ADE1)2, containing adjacent 0.5-kb and 3.0-kb BamHI fragments in pBR322 gave three types of yeast transformants: (1) transformants carrying extrachromosomal copies of the plasmid which indicate the presence of a functional ars sequence, (2) transformants indistinguishable from ade1 strains by hybridization analyis, and (3) a transformant carrying a multimeric form of YRp(ADE1)2. Cells transformed with either of the plasmids are free of the red pigment characteristic of ade1 mutants and indicate potential for direct colour-based selection of yeast transformants using ADE1 plasmids.     

Recombination between bacteriophage T4 and plasmid pBR322 molecules containing cloned T4 DNA

Reciprocal recombination between T4 DNA cloned in plasmid pBR322 and homologous sequences in bacteriophage T4 genomes leads to integration of complete plasmid molecules into phage genomes. Indirect evidence of this integration comes from two kinds of experiments. Packaging of pBR322 DNA into mature phage particles can be detected by a DNA--DNA hybridization assay only when a T4 restriction fragment is cloned in the plasmid. The density of the pBR322 DNA synthesized after phage infection is also consistent with integration of plasmid vector DNA into vegetative phage genomes. Direct evidence of plasmid integration into phage genomes in the region of DNA homology comes from genetic and biochemical analysis of cytosine-containing DNA isolated from mature phage particles. Agarose gel electrophoresis of restriction endonuclease-digested DNA, followed by Southern blot analysis with nick-translated probes, shows that entire plasmid molecules become integrated into phage genomes in the region of T4 DNA homology. In addition, this analysis shows that genomes containing multiple copies of complete plasmid molecules are also formed. Among phage particles containing at least one integrated copy, the average number of integrated plasmid molecules is almost ten. A cloning experiment done with restricted DNA confirms these conclusions and illustrates a method for walking along the T4 genome.     

Boundaries of the Origin of Replication: Creation of a pET-28a-Derived Vector with p15A Copy Control Allowing Compatible Coexistence with pET Vectors

During our studies involving protein-DNA interactions, we constructed plasmid pSAM to fulfill two requirements: 1) to facilitate transfer of cloned sequences from widely used expression vector pET-28a(+), and 2) to provide a vector compatible with pBR322-derived plasmids for use in cells harboring two different plasmids. Vector pSAM is a pET-28a(+)-derived plasmid with the p15A origin of replication (ori); pET-28a(+) contains the pBR322 replicon that is incompatible with other pBR322-derived plasmids. By replacing the original pET-28a(+) replicon–comprising the ori, RNAI, RNAII, and Rom–with the p15A replicon, we generated pSAM, which contains the pET-28a(+) multiple cloning site and is now compatible with pBR322-derived vectors. Plasmid copy number was assessed using quantitative PCR: pSAM copy number was maintained at 18±4 copies per cell, consistent with that of other p15A-type vectors. Compatibility with pBR322-derived vectors was tested with pGEX-6p-1 and pSAM, which maintained their copy numbers of 49±10 and 14±4, respectively, when both were present within the same cell. Swapping of the ori is a common practice; however, it is vital that all regions of the original replicon be removed. Additional vector pSAMRNAI illustrated that incompatibility remains when portions of the replicon, such as RNAI and/or Rom, are retained; pSAMRNAI, which contains the intact RNAI but not ROM, lowered the copy number of pGEX-6p-1 to 18±2 in doubly transformed cells due to retention of the pET-28a(+)-derived RNAI. Thus, pSAMRNAI is incompatible with vectors controlled by the pBR322 replicon and further demonstrates the need to remove all portions of the original replicon and to quantitatively assess copy number, both individually and in combination, to ensure vector compatibility. To our knowledge, this is the first instance where the nascent vector has been quantitatively assessed for both plasmid copy number and compatibility. New vector pSAM provides ease of transferring sequences from commonly used pET-28a(+) into a vector compatible with the pBR322 family of plasmids. This essential need is currently not filled.     

Bacillus licheniformis as an object for the propagaton of heterologous genetic material from bacilli

Bacillus licheniformis was transformed with plasmids pUB110 and pJJ10 (pUB110 - pBR322) isolated from Bac. subtilis and Escherichia coli, respectively. It was revealed that the structure and genetic properties of the plasmids did not change during the transformation process. pJJ101 (pJJ10-rib) DNA isolated from E. coli and containing helper pJJ10 plasmid was used, as a recipient. It was shown that pJJ101 rib markers were "rescued" by the resident plasmid during transformation of Bac. licheniformis (pJJ10). Plasmid pLP1 containing ribB, ribD, Kmr genes and the pUB110 replicator, was isolated from the transformants. pLP1 plasmid might be considered as a detected derivative of the parental pJJ101 plasmid. The deletion is presented by 3,9 MD segment that contains the pBR322 replicator. pLP1 DNA is capable of transforming plasmidless strains of Bac. licheniformis and Bac. subtilis.     

Stability of Integrated Plasmids in the Chromosome of Lactococcus lactis

Derivatives of plasmids pBR322, pUB110, pSC101, and pTB19, all containing an identical fragment of lactococcal chromosomal DNA, were integrated via a Campbell-like mechanism into the same chromosomal site of Lactococcus lactis MG1363, and the transformants were analyzed for the stability of the integrated plasmids. In all cases the erythromycin resistance gene of pE194 was used as a selectable marker. Transformants obtained by integration of the pBR322 derivatives contained a head-to-tail arrangement of several plasmid copies, which most likely was caused by integration of plasmid multimers. Single-copy integrations were obtained with the pSC101 and pTB19 derivatives. In all of these transformants no loss of the erythromycin gene was detected during growth for 100 generations in the absence of the antibiotic. In contrast, transformants containing integrated amplified plasmid copies of pUB110 derivatives were unstable under these conditions. Since pUB110 appeared to have replicative activity in L. lactis, we suggest that this activity destabilized the amplified structures in L. lactis.     

Genetical and Molecular Analyses of qa-2 Transformants in NEUROSPORA CRASSA

Neurospora crassa qa-2+ transformants from five different donor DNA clones were analyzed by genetical and molecular techniques. None of the 32 transformants have the qa-2+ DNA replacing the qa-2- gene in linkage group VII. In one transformant, the qa-2+ DNA was inserted adjacent to the qa-2- gene. Thirty-one transformants have the qa-2+ inserts at sites not linked, or not closely linked, to the qa-2 locus in LG VII. Plasmid sequences were integrated along with the qa-2+ gene in 28 transformants. In the unlinked duplication-type transformants, catabolic dehydroquinase (the qa-2+ gene product) was induced at 5-100% of the wild-type-induced enzyme activity, with 24 transformants in the 5-80% range. The reduced levels of enzyme activity may be due to "position effects" of sequences adjacent to the integration site either in the N. crassa genomic DNA or in the flanking plasmid (pBR322 or pBR325) sequences. Unexpected gene conversion-like events, in which a qa-2+ gene was changed to qa-2-, were observed in tetrads from intercrosses between unlinked duplication-type transformants and in selfings of such transformants.     

Application of a ribosomal DNA integration vector in the construction of a brewer's yeast having alpha-acetolactate decarboxylase activity

An integration plasmid, pIARL28, containing the ribosomal DNA gene as a homologous recombination sequence was constructed for introduction of the alpha-acetolactate decarboxylase gene into brewer's yeast. The transformation efficiency of pIARL28 was 20- to 50-fold higher than those of the other YIp vectors, as yeast cells had approximately 140 copies of the ribosomal DNA gene. All transformants showed very high alpha-acetolactate decarboxylase activity due to the multiple integrated copies of the plasmid. The transformants were grown in nonselective conditions, and segregants which had maintained the alpha-acetolactate decarboxylase expression cassette but no other vector sequences were isolated. Southern analysis showed that these marker-excised segregants contained more than 20 copies of the alpha-acetolactate decarboxylase gene and were stably maintained under nonselective conditions. Fermentation tests confirmed that the diacetyl concentration was considerably reduced in wort fermented by these marker-excised segregants. The degree of reduction was related to the copy number of the alpha-acetolactate decarboxylase gene.     

Application of a ribosomal DNA integration vector in the construction of a brewer's yeast having alpha-acetolactate decarboxylase activity.

An integration plasmid, pIARL28, containing the ribosomal DNA gene as a homologous recombination sequence was constructed for introduction of the alpha-acetolactate decarboxylase gene into brewer's yeast. The transformation efficiency of pIARL28 was 20- to 50-fold higher than those of the other YIp vectors, as yeast cells had approximately 140 copies of the ribosomal DNA gene. All transformants showed very high alpha-acetolactate decarboxylase activity due to the multiple integrated copies of the plasmid. The transformants were grown in nonselective conditions, and segregants which had maintained the alpha-acetolactate decarboxylase expression cassette but no other vector sequences were isolated. Southern analysis showed that these marker-excised segregants contained more than 20 copies of the alpha-acetolactate decarboxylase gene and were stably maintained under nonselective conditions. Fermentation tests confirmed that the diacetyl concentration was considerably reduced in wort fermented by these marker-excised segregants. The degree of reduction was related to the copy number of the alpha-acetolactate decarboxylase gene.     

Drosophila P element integration in the mouse

A recombinant plasmid containing the Drosophila melanogaster P element transposon was microinjected into mouse zygotes. Dot-blot analysis indicated that one of the newborns contained a single copy of the microinjected DNA per haploid mouse genome equivalent; two other newborns had integrated multiple copies of the P element construct. Southern mapping revealed that the entire plasmid, including both pBR322 sequences and P element sequences, had integrated in each of the three animals. In the two mice carrying multiple copies of the microinjected DNA, the copies appear to be linked in a tandem head-to-tail array. Therefore, in each of the three newborns integration of P element sequences has occurred by a mechanism which is distinct from that observed when the same plasmid is injected into Drosophila embryos. Analysis of DNA from the offspring of one of the transgenic mice showed no indication of transposition of P element sequences.     

Development of autonomously replicating plasmids for Candida albicans.

A pool of Candida albicans RsaI fragments cloned onto a vector containing pBR322 sequences and the Candida ADE2 gene was used to transform a Candida ade2 mutant to adenine protrophy. A potential autonomously replicating sequence (ARS) in Candida DNA was identified by two criteria: instability of the selectable marker in the absence of selection and the presence of free plasmid in total DNA preparations. Plasmids carrying the ARS transformed C. albicans at a high frequency (200 to 1,000 ADE+ transformants per microgram of DNA), and Southern hybridization analysis of these transformants indicated that multiple copies of the plasmid sequences were present and that, although they were present in high-molecular-weight molecules, these sequences had not undergone rearrangement. Orthogonal field alternation gel electrophoresis indicated that the high-molecular-weight transforming sequences were not associated with any chromosome. The simplest interpretation to account for these data is that the transforming sequences are present as oligomers consisting of head-to-tail tandem repeats. The transformed strains occasionally yield stable segregants in which the transforming sequences are integrated into the chromosome as repeats. The Candida sequence responsible for the ARS phenotype was limited to a single 0.35-kilobase RsaI fragment which is present in one copy per haploid genome.     

Insertion of a genetic marker into the ribosomal DNA of yeast

Plasmid pBR322 carrying the yeast LEU2+ gene transforms leu⁻ yeast into LEU+ at a low frequency by integration at homologous chromosomal DNA. When one-half of the yeast rDNA repeat unit (BglII-A) is inserted into the plasmid, the frequency of yeast transformation increases 100- to 200-fold, in proportion to the increased amount of homologous repetitive rDNA available for integration. When the other half of the repeat unit (BglII-B) is inserted into the plasmid, the transformation frequency increases by a factor of 10⁴, and the transformants are very unstable. It is likely that this fragment of rDNA contains a yeast origin of replication. This plasmid is a useful vector for cloning fragments of yeast DNA in yeast. We have used the LEU2+ gene, inserted into the rDNA locus, as a genetic marker for mapping the rDNA, in a procedure analogous to the use of antibiotic resistance transposons in the mapping of bacterial genes. Yeast ribosomal DNA is on chromosome XII between asp5 and ura4 as determined by mitotic linkage. Genetic analysis of markers inserted at the rDNA locus should be a useful tool for studying the conservation of sequence homology and the conservation of copy number of repeated genes.     

Isolation of a yeast gene involved in species-specific pre-tRNA processing.

To identify genes involved in pre-tRNA processing, we searched for yeast DNA sequences that specifically enhanced the expression of the SUP4(G37) gene. The SUP4(G37) gene possesses a point mutation at position 37 of suppressor tRNA(Tyr). This lesion results in a reduced rate of pre-tRNA splicing and a decreased level of nonsense suppression. A SUP4(G37) strain was transformed with a yeast genomic library, and the transformants were screened for increased suppressor activity. One transformant contained a plasmid that encoded an unessential gene, STP1, that in multiple copies enhanced the suppression of SUP4(G37) and caused increased production of mature SUP4(G37) product. Disruption of the genomic copy of STP1 resulted in a reduced efficiency of SUP4-mediated suppression and the accumulation of pre-tRNAs. Not all intron-containing pre-tRNAs were affected by the stp1-disruption. At least five of the nine families of pre-tRNAs were affected. Two other species, pre-tRNA(Ile) and pre-tRNA(3Leu), were not. We propose that STP1 encodes a tRNA species-specific product that functions as a helper for pre-tRNA splicing. The STP1 product may interact with pre-tRNAs to generate a structure that is efficiently recognized by splicing machinery.     

Efficient Transformation of the Astaxanthin-Producing Yeast Phaffia Rhodozyma

An efficient transformation system for the astaxanthin-producing yeast Phaffia rhodozyma was developed based on electroporation that routinely yields approximately 1000 transformants per g of plasmid DNA. The high transformation efficiency depends on vector integration in the ribosomal DNA (rDNA) and the presence of the homologous glycolytic glyceraldehyde-3-phosphate dehydrogenase (gpd) promoter and terminator to drive the expression of the transposon Tn5 encoded kanamycin resistance gene (Km^R) as a selective marker. Using this system stable transformants were obtained, carrying multiple plasmid copies. Plasmid copy number could be markedly increased by deletion of the gpd terminator from the transforming plasmid.     

Site-specific integration in Saccharopolyspora erythraea and multisite integration in Streptomyces lividans of actinomycete plasmid pSE101.

An 11.3-kilobase-pair plasmid, designated pSE101, exists in Saccharopolyspora erythraea NRRL 2338 as an integrated sequence (pSE101int) at a unique chromosomal location and in the free form in less than an average of 1 copy per 10 chromosomes. The plasmid sequence is missing from S. erythraea NRRL 2359. Restriction maps of the free and integrated forms of pSE101 showed point-to-point correspondence. Plasmid pECT2 was constructed by ligation of pSE101, pBR322, and the gene for thiostrepton resistance (tsr). When introduced by polyethylene glycol-mediated transformation into protoplasts of S. erythraea NRRL 2359, all thiostrepton-resistant regenerants examined were found to carry a single copy of pECT2 in the integrated state at a single chromosomal site. The chromosomal site of pECT2 integration in strain NRRL 2359 (attB) corresponded to the chromosomal location of pSE101int in strain NRRL 2338. The plasmid crossover site (attP) was mapped to the plasmid site that corresponded to the site of interruption of the plasmid sequence in the host carrying pSE101int, indicating that site-specific integrative recombination had occurred. An additional 2.8-kilobase-pair chromosomal sequence homologous to a segment of pSE101 was also observed in strains NRRL 2338 and NRRL 2359. After introduction of pECT2 into Streptomyces lividans, approximately half of the transformants examined were found to carry the plasmid as a stable, autonomously replicating element. The other half carried a single copy of pECT2 as an integrated sequence, but the location of pECT2int in Streptomyces lividans varied from one transformant to another. In each case, integrative crossover used the attP site. A model is proposed to account for the determination of the particular state of pSE101 in Streptomyces lividans.