Crystal structure of a ternary complex of DnrK, a methyltransferase in daunorubicin biosynthesis, with bound products

One of the final steps in the biosynthesis of the widely used anti-tumor drug daunorubicin in Streptomyces peucetius is the methylation of the 4-hydroxyl group of the tetracyclic ring system. This reaction is catalyzed by the S-adenosyl-L-methionine-dependent carminomycin 4-O-methyltransferase DnrK. The crystal structure of the ternary complex of this enzyme with the bound products S-adenosyl-L-homocysteine and 4-methoxy-epsilon-rhodomycin T has been determined to a 2.35-angstroms resolution. DnrK is a homodimer, and the subunit displays the typical fold of small molecule O-methyltransferases. The structure provides insights into the recognition of the anthracycline substrate and also suggests conformational changes as part of the catalytic cycle of the enzyme. The position and orientation of the bound ligands are consistent with an SN2 mechanism of methyl transfer. Mutagenesis experiments on a putative catalytic base confirm that DnrK most likely acts as an entropic enzyme in that rate enhancement is mainly due to orientational and proximity effects. This contrasts the mechanism of DnrK with that of other O-methyltransferases where acid/base catalysis has been demonstrated to be an essential contribution to rate enhancement.     

Energetic limits of phosphotransfer in the catalytic subunit of cAMP-dependent protein kinase as measured by viscosity experiments.

Viscosogenic agents were used to test the diffusion limits of the reaction catalyzed by the catalytic subunit of the cAMP-dependent protein kinase. The effects of glycerol and sucrose on the maximum rate (kcat) and the apparent second-order rate constants (kcat/Kpeptide) for the phosphorylation of four peptidic substrates were measured at their pH optima. The agents were found to have moderate to no effect on kcat/Kpeptide for good and poor substrates, respectively. Conversely, kcat was highly sensitive to solvent viscosity for three of the four peptides at high concentrations of ATP. Taken together, these data indicate that enzymatic phosphorylation by the catalytic subunit proceeds with rapid or near rapid equilibrium binding of substrates and that all steps following the central substrate complex (i.e., chemical and conformational events) are fast relative to the rate-determining dissociation of product, ADP, when ATP levels are high. Under saturating concentrations of peptide I, LRRASLG, an unproductive form of the enzyme is populated. The observed phosphorylation rate from this complex is involved in rate limitation owing to a slow step separating unproductive and productive enzyme forms. The data are used to establish a kinetic mechanism for the catalytic subunit that predicts initial reaction velocities under varying concentrations of ATP and substrate.     

PPIase catalysis by human FK506-binding protein proceeds through a conformational twist mechanism.

FK506-binding protein (FKBP) catalyzes the cis-trans isomerization of the peptidyl-prolyl amide bond (the PPIase reaction) and is the major intracellular receptor for the immunosuppressive drugs FK506 and rapamycin. One mechanism proposed for catalysis of the PPIase reaction requires attack of an enzyme nucleophile on the carbonyl carbon of the isomerized peptide bond. An alternative mechanism requires conformational distortion of the peptide bond with or without assistance by an enzyme hydrogen bond donor. We have determined the kinetic parameters of the human FKBP-catalyzed PPIase reaction. At 5 degrees C, the isomerization of Suc-Ala-Leu-Pro-Phe-pNA proceeds in 2.5% trifluorethanol with kcat = 600 s-1, Km = 0.5 mM and kcat/Km = 1.2 x 10(6) M-1s-1. The kcat/Km shows little pH dependence between 5 and 10. A normal secondary deuterium isotope effect is observed on both kcat and kcat/Km. To investigate dependence on enzyme nucleophiles and proton donors, we have replaced eight potential catalytic residues with alanine by site-directed mutagenesis. Each FKBP variant efficiently catalyzes the PPIase reaction. Taken together, these data support an unassisted conformational twist mechanism with rate enhancement due in part to desolvation of the peptide bond at the active site. Fluorescence quenching of the buried tryptophan 59 residue by peptide substrate suggests that isomerization occurs in a hydrophobic environment.     

Degradation of oxidized insulin B chain by the multiproteinase complex macropain (proteasome)

The peptides generated from the degradation of the oxidized B chain of bovine insulin by the multiproteinase complex macropain (proteasome) have been analyzed by reverse-phase peptide mapping and identified by N-terminal amino acid sequencing and composition analysis. Six of the 29 peptide bonds in the insulin B chain were found to be rapidly cleaved by macropain. The catalytic center that cleaves the Gln4-His5 bond could be distinguished from the center or centers that cleave the other preferred bonds by its specific susceptibility to inhibition by leupeptin, antipain, chymostatin, and pentamidine, suggesting that macropain utilizes at least two distinct catalytic centers for the degradation of this model polypeptide. The same effectors simultaneously enhance the rate of cleavage at the other susceptible sites in insulin B. The quantitative characteristics of this effect indicate that different catalytic centers of the complex may be functionally coupled, possibly by an allosteric mechanism or possibly by a mechanism in which binding to the catalytic centers is preceded by a rate-limiting binding of the substrate to a site or sites on the enzyme distinct from the catalytic centers. The kinetics of insulin B chain degradation indicate that macropain can catalyze sequential hydrolysis of peptide bonds in a single substrate molecule via a reaction pathway that involves channeling of peptide intermediates between different catalytic centers within the multienzyme complex. This capacity for channeling may confer potential physiological advantages of increasing the efficiency of amino acid recycling and reducing the pool sizes of peptide intermediates that are generated during the degradation of polypeptides in the intracellular milieu.     

Studies of the mechanism of action and regulation of cAMP-dependent protein kinase

Magnetic resonance and kinetic studies of the catalytic subunit of a Type II cAMP-dependent protein kinase from bovine heart have established the active complex to be an enzyme-ATP-metal bridge. The metal ion is β,γ coordinated with Δ chirality at the β-phosphorous atom. The binding of a second metal ion at the active site which bridges the enzyme to the three phosphoryl groups of ATP, partially inhibits the reaction. Binding of the metal-ATP substrate to the enzyme occurs in a diffusion-controlled reaction followed by a 40 ° change in the glycosidic torsional angle. This conformational change results from strong interaction of the nucleotide base with the enzyme. NMR studies of four ATP-utilizing enzymes show a correlation between such conformational changes and high nucleotide base specificity. Heptapeptide substrates and substrate analogs bind to the active site of the catalytic subunit at a rate significantly lower than collision frequency indicating conformational selection by the enzyme or a subsequent slow conformational change. NMR studies of the conformation of the enzyme-bound peptide substrates have ruled out α-helical and β-pleated sheet structures. The results of kinetic studies of peptide substrates in which the amino acid sequence was systematically varied were used to rule out the obligatory requirement for all possible β-turn conformations within the heptapeptide although an enzymatic preference for a β_2–5 or β_3–6 turn could not be excluded. Hence if protein kinase has an absolute requirement for a specific secondary structure, then this structure must be a coil. In the enzyme-substrate complex the distance along the reaction coordinate between the γ-P of ATP and the serine oxygen of the peptide substrate (5.3 ± 0.7 Å) allows room for a metaphosphate intermediate. This finding together with kinetic observations as well as the location of the inhibitory metal suggest a dissociative mechanism for protein kinase, although a mechanism with some associative character remains possible. Regulation of protein kinase is accomplished by competition between the regulatory subunit and peptide or protein substrates at the active site of the catalytic subunit. Thus, the regulatory subunit is found by NMR to block the binding of the peptide substrate to the active site of protein kinase but allows the binding of the nucleotide substrate and divalent cations. The dissociation constant of the regulatory subunit from the active site (10^?10m) is increased ~10-fold by phosphorylation and ~10⁴-fold by the binding of cAMP, to a value (10^?5m) which exceeds the intracellular concentration of the R₂C₂ holoenzyme complex (10^?6m). The resulting dissociation of the holoenzyme releases the catalytic subunit, permitting the active site binding of peptide or protein substrates.     

In vitro selection of a novel catalytic RNA: characterization of a sulfur alkylation reaction and interaction with a small peptide.

An in vitro RNA selection for catalytic activity was used to co-select for binding activity to a small peptide. 5'-phosphorothioate-modified RNA (GMPS-RNA) sequences were selected from a randomized pool of oligoribonucleotides for their ability to accelerate a halide substitution reaction with N-bromoacetyl-bradykinin (BrBK). One RNA selected shows a 2,420-fold increase in rate of reaction with BrBK relative to the starting pool. This reaction is specifically inhibited by free bradykinin (Ki 230 microM), indicating that interactions with bradykinin contribute to the rate enhancement. Inhibition of the reaction by the peptide requires both the amino- and carboxy-terminal arginine residues of the peptide for optimal inhibition activity. Reaction with N-bromoacetamide is not enhanced, indicating that the intrinsic reactivity of the 5' phosphorothioate is not increased in the selected RNA. Through 3'-end boundary analysis, much of the catalytic activity of the selected GMPS-RNA is shown to reside in a hairpin structure in the selected region of the molecule. This hairpin structure is also implicated in the recognition of the peptide substrate.     

Crystal structures of N-acetylglucosamine-phosphate mutase, a member of the alpha-D-phosphohexomutase superfamily, and its substrate and product complexes

N-acetylglucosamine-phosphate mutase (AGM1) is an essential enzyme in the synthetic process of UDP-N-acetylglucosamine (UDP-GlcNAc). UDP-GlcNAc is a UDP sugar that serves as a biosynthetic precursor of glycoproteins, mucopolysaccharides, and the cell wall of bacteria. Thus, a specific inhibitor of AGM1 from pathogenetic fungi could be a new candidate for an antifungal reagent that inhibits cell wall synthesis. AGM1 catalyzes the conversion of N-acetylglucosamine 6-phosphate (GlcNAc-6-P) into N-acetylglucosamine 1-phosphate (GlcNAc-1-P). This enzyme is a member of the alpha-D-phosphohexomutase superfamily, which catalyzes the intramolecular phosphoryl transfer of sugar substrates. Here we report the crystal structures of AGM1 from Candida albicans for the first time, both in the apoform and in the complex forms with the substrate and the product, and discuss its catalytic mechanism. The structure of AGM1 consists of four domains, of which three domains have essentially the same fold. The overall structure is similar to those of phosphohexomutases; however, there are two additional beta-strands in domain 4, and a circular permutation occurs in domain 1. The catalytic cleft is formed by four loops from each domain. The N-acetyl group of the substrate is recognized by Val-370 and Asn-389 in domain 3, from which the substrate specificity arises. By comparing the substrate and product complexes, it is suggested that the substrate rotates about 180 degrees on the axis linking C-4 and the midpoint of the C-5-O-5 bond in the reaction.     

Catalytic Water Co-Existing with a Product Peptide in the Active Site of HIV-1 Protease Revealed by X-Ray Structure Analysis

Background

It is known that HIV-1 protease is an important target for design of antiviral compounds in the treatment of Acquired Immuno Deficiency Syndrome (AIDS). In this context, understanding the catalytic mechanism of the enzyme is of crucial importance as transition state structure directs inhibitor design. Most mechanistic proposals invoke nucleophilic attack on the scissile peptide bond by a water molecule. But such a water molecule coexisting with any ligand in the active site has not been found so far in the crystal structures.

Principal Findings

We report here the first observation of the coexistence in the active site, of a water molecule WAT1, along with the carboxyl terminal product (Q product) peptide. The product peptide has been generated in situ through cleavage of the full-length substrate. The N-terminal product (P product) has diffused out and is replaced by a set of water molecules while the Q product is still held in the active site through hydrogen bonds. The position of WAT1, which hydrogen bonds to both the catalytic aspartates, is different from when there is no substrate bound in the active site. We propose WAT1 to be the position from where catalytic water attacks the scissile peptide bond. Comparison of structures of HIV-1 protease complexed with the same oligopeptide substrate, but at pH 2.0 and at pH 7.0 shows interesting changes in the conformation and hydrogen bonding interactions from the catalytic aspartates.

Conclusions/Significance

The structure is suggestive of the repositioning, during substrate binding, of the catalytic water for activation and subsequent nucleophilic attack. The structure could be a snap shot of the enzyme active site primed for the next round of catalysis. This structure further suggests that to achieve the goal of designing inhibitors mimicking the transition-state, the hydrogen-bonding pattern between WAT1 and the enzyme should be replicated.     

Transient-state kinetic analysis of Saccharomyces cerevisiae myristoylCoA:protein N-myristoyltransferase reveals that a step after chemical transformation is rate limiting

MyristoylCoA:protein N-myristoyltransferase is a member of the superfamily of GCN5-related N-acetyltransferases and catalyzes the covalent attachment of myristate to the N-terminal Gly residue of proteins with diverse functions. Saccharomyces cerevisiae Nmt1p is a monomeric protein with an ordered bi-bi reaction mechanism: myristoylCoA is bound prior to peptide substrate; after catalysis, CoA is released followed by myristoylpeptide. Analysis of the X-ray structure of Nmt1p with bound substrate analogues indicates that the active site contains an oxyanion hole and a catalytic base and that catalysis proceeds through the nucleophilic addition-elimination mechanism. To determine the rate-limiting step in the enzyme reaction, pre-steady-state kinetic analyses were performed using a new, sensitive nonradioactive assay that detects CoA. Multiple turnover quenched flow studies disclosed that a step after the chemical transformation limits the overall rate of the reaction. Multiple and single turnover analyses revealed that the rate for the chemical transformation step is 13.8+/-0.6 s(-1) while the slower steady-state phase is 0.10+/-0.01 s(-1). Stopped flow kinetic studies of substrate acquisition indicated that binding of myristoylCoA to the apo-enzyme occurs through at least a two-step process, with a fast phase rate of 3.2 x 10(8) M(-1) s(-1) and a slow phase rate of 23+/-2 s(-1) (defined at 5 degrees C). Binding of an octapeptide substrate, representing the N-terminal sequence of a known yeast N-myristoylprotein (Cnb1p), to a binary complex composed of Nmt1p and a nonhydrolyzable myristoylCoA analogue (S-(2-oxo)pentadecylCoA) has a second-order rate constant of 2.1+/-0.3 x 10(6) M(-1) s(-1) and a dissociation rate of 26+/-15 s(-1) (defined at 10 degrees C). These results are interpreted in light of the X-ray structures of this enzyme.     

The crystal structure of a phosphorylase kinase peptide substrate complex: kinase substrate recognition.

The structure of a truncated form of the gamma-subunit of phosphorylase kinase (PHKgammat) has been solved in a ternary complex with a non-hydrolysable ATP analogue (adenylyl imidodiphosphate, AMPPNP) and a heptapeptide substrate related in sequence to both the natural substrate and to the optimal peptide substrate. Kinetic characterization of the phosphotransfer reaction confirms the peptide to be a good substrate, and the structure allows identification of key features responsible for its high affinity. Unexpectedly, the substrate peptide forms a short anti-parallel beta-sheet with the kinase activation segment, the region which in other kinases plays an important role in regulation of enzyme activity. This anchoring of the main chain of the substrate peptide at a fixed distance from the gamma-phosphate of ATP explains the selectivity of PHK for serine/threonine over tyrosine as a substrate. The catalytic core of PHK exists as a dimer in crystals of the ternary complex, and the relevance of this phenomenon to its in vivo recognition of dimeric glycogen phosphorylase b is considered.     

Crystal structure of Bacillus sp. GL1 xanthan lyase complexed with a substrate: insights into the enzyme reaction mechanism

Bacillus sp. GL1 xanthan lyase, a member of polysaccharide lyase family 8 (PL-8), acts exolytically on the side-chains of pentasaccharide-repeating polysaccharide xanthan and cleaves the glycosidic bond between glucuronic acid (GlcUA) and pyruvylated mannose (PyrMan) through a beta-elimination reaction. To clarify the enzyme reaction mechanism, i.e. its substrate recognition and catalytic reaction, we determined crystal structures of a mutant enzyme, N194A, in complexes with the product (PyrMan) and a substrate (pentasacharide) and in a ligand-free form at 1.8, 2.1, and 2.3A resolution. Based on the structures of the mutant in complexes with the product and substrate, we found that xanthan lyase recognized the PyrMan residue at subsite -1 and the GlcUA residue at +1 on the xanthan side-chain and underwent little interaction with the main chain of the polysaccharide. The structure of the mutant-substrate complex also showed that the hydroxyl group of Tyr255 was close to both the C-5 atom of the GlcUA residue and the oxygen atom of the glycosidic bond to be cleaved, suggesting that Tyr255 likely acts as a general base that extracts the proton from C-5 of the GlcUA residue and as a general acid that donates the proton to the glycosidic bond. A structural comparison of catalytic centers of PL-8 lyases indicated that the catalytic reaction mechanism is shared by all members of the family PL-8, while the substrate recognition mechanism differs.     

The structure-function relationship in the clostripain family of peptidases.

In this study we investigate the active-site structure and the catalytic mechanism of clostripain by using a combination of three separate techniques: affinity labelling, site-directed mutagenesis and molecular modelling. A benzamidinyl-diazo dichlorotriazine dye (BDD) was shown to act as an efficient active site-directed affinity label for Clostridium histolyticum clostripain. The enzyme, upon incubation with BDD in 0.1 m Hepes/NaOH buffer pH 7.6, exhibits a time-dependent loss of activity. The rate of inactivation exhibits a nonlinear dependence on the BDD concentration, which can be described by reversible binding of dye to the enzyme prior to the irreversible reaction. The dissociation constant of the reversible formation of an enzyme-BDD complex is KD = 74.6 +/- 2.1 micro m and the maximal rate constant of inactivation is k3 = 0.21 x min(-1). Effective protection against inactivation by BDD is provided by the substrate N-benzoyl-L-arginine ethyl ester (BAEE). Cleavage of BDD-modified enzyme with trypsin and subsequent separation of peptides by reverse-phase HPLC gave only one modified peptide. Amino acid sequencing of the modified tryptic peptide revealed the target site of BDD reaction to be His176. Site-directed mutagenesis was used to study further the functional role of His176. The mutant His176Ala enzyme exhibited zero activity against BAEE. Together with previous data, these results confirm that a catalytic dyad of His176 and Cys231 is responsible for cysteine peptidase activity in the C11 peptidase family. A molecular model of the catalytic domain of clostripain was constructed using a manually extended fold recognition-derived alignment with caspases. A rigorous iterative modelling scheme resulted in an objectively sound model which points to Asp229 as responsible for defining the strong substrate specificity for Arg at the P1 position. Two possible binding sites for the calcium required for auto-activation could be located. Database searches show that clostripain homologues are not confined to bacterial lineages and reveal an intriguing variety of domain architectures.     

Role of conformational fluctuations in the enzymatic reaction of HIV-1 protease

The emergence of compensatory drug-resistant mutations in HIV-1 protease challenges the common view of the reaction mechanism of this enzyme. Here, we address this issue by performing classical and ab initio molecular dynamics simulations (MD) on a complex between the enzyme and a peptide substrate. The classical MD calculation reveals large-scale protein motions involving the flaps and the cantilever. These motions modulate the conformational properties of the substrate at the cleavage site. The ab initio calculations show in turn that substrate motion modulates the activation free energy barrier of the enzymatic reaction dramatically. Thus, the catalytic power of the enzyme does not arise from the presence of a pre-organized active site but from the protein mechanical fluctuations. The implications of this finding for the emergence of drug-resistance are discussed.     

Studies on the mechanism of action of xanthine oxidase

Recent studies of the reaction mechanism of the molybdenum-containing enzyme xanthine oxidase are presented. The pH-dependence of both the steady-state and rapid reaction kinetics of the enzyme exhibits is bell-shaped, with pK(a)s for the acid and alkaline limbs of 6.6 and 7.4, respectively. These are assigned to ionizations of an active site base and substrate, respectively, with the implication that enzyme acts on the neutral rather than monoanionic form of the purine substrate. A computational study provides evidence that in the course of the reaction tautomerization of substrate occurs, with a proton moving from N-3 to N-9 in the course of the reaction - enzyme facilitation of this tautomerization may contribute as much as 24 kcal/mol in transition state stabilization for the reaction. Electron spin echo (ESEEM) and electron-nuclear double resonance (ENDOR) studies of the so-called "very rapid" Mo(V) intermediate of the reaction, the latter work using a newly synthesized form of the substrate 2-hydroxy-6-methylpurine that has been selectively isotopically labeled at C-8, indicates that product is bound to the molybdenum of the active site in a simple, end-on fashion, consistent with a reaction mechanism involving nucleophilic attack of a (deprotonated) Mo-OH on the C-8 position of substrate. A kinetic study using a series of purines has failed to identify a correlation between the one-electron reduction potential for substrate and catalytic effectiveness, indicating that a reaction mechanism initiated by one-electron, outer-sphere electron transfer is unlikely. Finally, a consideration of the active site structure in the context of the above work suggests specific amino acid residues to target for site-directed mutagenesis studies. Preliminary experiments with two such mutants are entirely consistent with the proposed catalytic roles of two active site glutamate residues.     

Reaction mechanism of hydroxynitrile lyases of the alpha/beta-hydrolase superfamily: the three-dimensional structure of the transient enzyme-substrate complex certifies the crucial role of LYS236

The hydroxynitrile lyases (HNLs) from Hevea brasiliensis (HbHNL) and from Manihot esculenta (MeHNL) are both members of the alpha/beta-hydrolase superfamily. Mechanistic proposals have been put forward in the past for both enzymes; they differed with respect to the role of the active-site lysine residue for which a catalytic function was claimed for the Hevea enzyme but denied for the Manihot enzyme. We applied a freeze-quench method to prepare crystals of the complex of HbHNL with the biological substrate acetone cyanohydrin and determined its three-dimensional structure. Site-directed mutagenesis was used to prepare the mutant K236L, which is inactive although its three-dimensional structure is similar to the wild-type enzyme. However, the structure of the K236L-acetone cyanohydrin complex shows the substrate in a different orientation from the wild-type complex. Finite difference Poisson-Boltzmann calculations show that in the absence of Lys(236) the catalytic base His(235) would be protonated at neutral pH. All of this suggests that Lys(236) is instrumental for catalysis in several ways, i.e. by correctly positioning the substrate, by stabilizing the negatively charged reaction product CN(-), and by modulating the basicity of the catalytic base. These data complete the elucidation of the reaction mechanism of alpha/beta-hydrolase HNLs, in which the catalytic triad acts as a general base rather than as a nucleophile; proton abstraction from the substrate is performed by the serine, and reprotonation of the product cyanide is performed by the histidine residues. Together with a threonine side chain, the active-site serine and lysine are also involved in substrate binding.     

Crystal structure of microbial transglutaminase from Streptoverticillium mobaraense

The crystal structure of a microbial transglutaminase from Streptoverticillium mobaraense has been determined at 2.4 A resolution. The protein folds into a plate-like shape, and has one deep cleft at the edge of the molecule. Its overall structure is completely different from that of the factor XIII-like transglutaminase, which possesses a cysteine protease-like catalytic triad. The catalytic residue, Cys(64), exists at the bottom of the cleft. Asp(255) resides at the position nearest to Cys(64) and is also adjacent to His(274). Interestingly, Cys(64), Asp(255), and His(274) superimpose well on the catalytic triad "Cys-His-Asp" of the factor XIII-like transglutaminase, in this order. The secondary structure frameworks around these residues are also similar to each other. These results imply that both transglutaminases are related by convergent evolution; however, the microbial transglutaminase has developed a novel catalytic mechanism specialized for the cross-linking reaction. The structure accounts well for the catalytic mechanism, in which Asp(255) is considered to be enzymatically essential, as well as for the causes of the higher reaction rate, the broader substrate specificity, and the lower deamidation activity of this enzyme.     

Reaction mechanism of the membrane-bound ATPase of submitochondrial particles from beef heart

Submitochondrial particles from beef heart, washed with dilute solutions of KCl so as to activate the latent, membrane-bound ATPase, F1, may be used to study single site catalysis by the enzyme. [gamma-32P]ATP, incubated with a molar excess of catalytic sites, a condition which favors binding of substrate in only a single catalytic site on the enzyme, is hydrolyzed via a four-step reaction mechanism. The mechanism includes binding in a high affinity catalytic site, Ka = 10(12)M-1, a hydrolytic step for which the equilibrium constant is near unity, and two product release steps in which Pi dissociates from catalytic sites about 10 times more rapidly than ADP. Catalysis by the membrane-bound ATPase also is characterized by a 10(6)-fold acceleration in the rate of net hydrolysis of [gamma-32P]ATP, bound in the high affinity catalytic site, that occurs when substrate is made available to additional catalytic sites on the enzyme. These aspects of the reaction mechanism of the ATPase of submitochondrial particles closely parallel the reaction mechanism determined for solubilized, homogeneous F1 (Grubmeyer, C., Cross, R. L., and Penefsky, H. S. (1982) J. Biol. Chem. 257, 12092-12100). The finding that removal of the enzyme from the membrane does not significantly alter the properties of single site catalysis lends support to models of ATP synthesis in oxidative phosphorylation, catalyzed by membrane-bound F1, that have been based on the study of the soluble enzyme.     

Evolutionary optimization of the catalytic efficiency of enzymes.

1. The rate equation for a generalized Michaelian type of enzymic reaction mechanism has been analyzed in order to establish how the mechanism should be kinetically designed in order to optimize the catalytic efficiency of the enzyme for a given average magnitude of true and apparent first-order rate constants in the mechanism at given concentrations of enzyme, substrate and product. 2. As long as on-velocity constants for substrate and product binding to the enzyme have not reached the limiting value for a diffusion-controlled association process, the optimal state of enzyme operation will be characterized by forward (true and apparent) first-order rate constants of equal magnitude and reverse rate constants of equal magnitude. The drop in free energy driving the catalysed reaction will occur to an equal extent for each reaction step in the mechanism. All internal equilibrium constants will be of equal magnitude and reflect only the closeness of the catalysed reaction to equilibrium conditions. 3. When magnitudes of on-velocity constants for substrate and product binding have reached their upper limits, the optimal kinetic design of the reaction mechanism becomes more complex and has to be established by numerical methods. Numerical solutions, calculated for triosephosphate isomerase, indicate that this particular enzyme may or may not be considered to exhibit close to maximal efficiency, depending on what value is assigned to the upper limit for a ligand association rate constant. 4. Arguments are presented to show that no useful information on the evolutionary optimization of the catalytic efficiency of enzymes can be obtained by previously taken approaches that are based on the application of linear free-energy relationships for rate and equilibrium constants in the reaction mechanism.     

Substrate modulation of enzyme activity in the herpesvirus protease family

The herpesvirus proteases are an example in which allosteric regulation of an enzyme activity is achieved through the formation of quaternary structure. Here, we report a 1.7 A resolution structure of Kaposi's sarcoma-associated herpesvirus protease in complex with a hexapeptide transition state analogue that stabilizes the dimeric state of the enzyme. Extended substrate binding sites are induced upon peptide binding. In particular, 104 A2 of surface are buried in the newly formed S4 pocket when tyrosine binds at this site. The peptide inhibitor also induces a rearrangement of residues that stabilizes the oxyanion hole and the dimer interface. Concomitant with the structural changes, an increase in catalytic efficiency of the enzyme results upon extended substrate binding. A nearly 20-fold increase in kcat/KM results upon extending the peptide substrate from a tetrapeptide to a hexapeptide exclusively due to a KM effect. This suggests that the mechanism by which herpesvirus proteases achieve their high specificity is by using extended substrates to modulate both the structure and activity of the enzyme.     

Computational studies of the domain movement and the catalytic mechanism of thymidine phosphorylase

Thymidine phosphorylase (TP) is a dual substrate enzyme with two domains. Each domain binds a substrate. In the crystal structure of Escherichia coli TP, the two domains are arranged so that the two substrate binding sites are too far away for the two substrates to directly react. Molecular dynamics simulations reveal a different structure of the enzyme in which the two domains have moved to place the two substrates in close contact. This structure has a root-mean-square deviation from the crystal structure of 4.1 A. Quantum mechanical calculations using this structure find that the reaction can proceed by a direct nucleophilic attack with a low barrier. This mechanism is not feasible in the crystal structure environment and is consistent with the mechanism observed for other N-glycosidic enzymes. Important catalytic roles are found for the three highly conserved residues His 85, Arg 171, and Lys 190.