Dimerization of leucine zippers analyzed by random selection.

The leucine zipper is a coiled coil that mediates specific dimerization of bZIP DNA-binding domains. A hydrophobic spine involving the conserved leucines runs down the coiled-coil and is thought to stabilize the dimer. We used the method of random selection to further define the primary sequence requirements for homodimer formation and heterodimer formation with Fos. When positions on either side of the hydrophobic spine of GCN4 are diversified to include the corresponding residues of Jun, a large percentage of the resulting sequences form homodimers, and a large percentage form heterodimers with Fos. Basic residues were preferred, but not essential, at position e of zippers which heterodimerize with Fos. When random sequences containing 5 heptad repeat of leucines are subject to a selection for homodimer formation, a diverse set of sequences is isolated. Certain residues are preferred at each position in the heptad repeat, although no essential primary sequence determinants could be identified. No pair of residues not involving the conserved leucines could be identified which strongly promotes homodimerization. These results suggest that factors determining leucine zipper dimerization are complex, with numerous interactions contributing to the association.     

An intrahelical salt bridge within the trigger site stabilizes the GCN4 leucine zipper

We previously reported that a helical trigger segment within the GCN4 leucine zipper monomer is indispensable for the formation of its parallel two-stranded coiled coil. Here, we demonstrate that the intrinsic secondary structure of the trigger site is largely stabilized by an intrahelical salt bridge. Removal of this surface salt bridge by a single amino acid mutation induced only minor changes in the backbone structure of the GCN4 leucine zipper dimer as verified by nuclear magnetic resonance. The mutation, however, substantially destabilized the dimeric structure. These findings support the proposed hierarchic folding mechanism of the GCN4 coiled coil in which local helix formation within the trigger segment precedes dimerization.     

Crystal structure of a super leucine zipper,an extended two‐stranded super long coiled coil

Coiled coil is a ubiquitous structural motif in proteins, with two to seven alpha helices coiled together like the strands of a rope, and coiled coil folding and assembly is not completely understood. A GCN4 leucine zipper mutant with four mutations of K3A, D7A, Y17W, and H18N has been designed, and the crystal structure has been determined at 1.6 Å resolution. The peptide monomer shows a helix trunk with short curved N‐ and C‐termini. In the crystal, two monomers cross in 35° and form an X‐shaped dimer, and each X‐shaped dimer is welded into the next one through sticky hydrophobic ends, thus forming an extended two‐stranded, parallel, super long coiled coil rather than a discrete, two‐helix coiled coil of the wild‐type GCN4 leucine zipper. Leucine residues appear at every seventh position in the super long coiled coil, suggesting that it is an extended super leucine zipper. Compared to the wild‐type leucine zipper, the N‐terminus of the mutant has a dramatic conformational change and the C‐terminus has one more residue Glu 32 determined. The mutant X‐shaped dimer has a large crossing angle of 35° instead of 18° in the wild‐type dimer. The results show a novel assembly mode and oligomeric state of coiled coil, and demonstrate that mutations may affect folding and assembly of the overall coiled coil. Analysis of the formation mechanism of the super long coiled coil may help understand and design self‐assembling protein fibers.     

A calculation strategy for the structure determination of symmetric demers by 1H NMR

The structure determination of symmetric dimers by NMR is impeded by the ambiguity of inter- and intramonomer NOE crosspeaks. In this paper, a calculation strategy is presented that allows the calculation of dimer structures without resolving ther ambuguity by additional experiments (like asymmetric labeling). The strategy employs a molecular dynamic-based simulated annealing approach to minimize a traget function. The experimental part of the target function contains distance restraints that correctly describe the ambiguity of the NOE peaks, and a novel term that restrains the symmetry of the dimer without requiring the knowledge of the symmetry axis. The use of the method is illustrated by three examples, using experimentally obtained data and model data derived from a known structure. For the purpose of testing the method, it is assumed that every NOE crosspeak is ambiguous in all three cases. It is shown that the structure of a homologous protein is known and in ab intio structure determination. The method can be extended to higher order symmetric multimers. © 1993 Wiley-Liss, Inc.     

Expression, purification, and characterization of coiled coil and leucine zipper domains of C-terminal myosin binding subunit of myosin phosphatase for solution NMR studies

Protein-protein interactions between MBS and PKG are mediated by the involvement of C-terminal domain of MBS, MBS(CT180) and N-terminal coiled coil (CC) leucine zipper (LZ) domain of PKG-Iα, PKG-Iα1(-59). MBS(CT180) is comprised of three structurally variant domains of non-CC, CC, and LZ nature. Paucity of three-dimensional structural information of these MBS domains precludes atomic level understanding of MBS-PKG contractile complex structure. Here we present data on cloning, expression, and purification of CC, LZ, and CCLZ domains of MBS(CT180) and their biophysical characterization using size exclusion chromatography (SEC), circular dichroism (CD), and two-dimensional (1)H-(15)N HSQC NMR. The methods as detailed resulted in high level protein expression and high milligram quantities of purified isotopically ((15)N and (13)C) enriched polypeptides. SEC, CD, and (1)H-(15)N HSQC NMR experiments demonstrated that recombinantly expressed MBS CC domain is well folded and exists as a dimer within physiologic pH range, which is supported by our previous findings. The dimerization of CC MBS is likely mediated through formation of coiled coil conformation. In contrast, MBS LZ domain was almost unfolded that exists as non-stable low structured monomer within physiologic pH range. Protein folding and stability of MBS LZ was improved as a function of decrease in pH that adopts a folded, stable, and structured conformation at acidified pH 4.5. SEC and NMR analyses of LZ vs. CCLZ MBS domains indicated that inclusion of CC domain partially improves protein folding of LZ domain.     

Jun DNA-binding is modulated by mutations between the leucines or by direct interaction of fos with the TGACTCA sequence

Mutations between the leucines of the "leucine zipper" domain of Jun D can either decrease (Asn 301 to Ala) or increase (Thr 307, Ala 308, to Glu, Val) homodimer formation and specific binding to DNA even though such changes do not modify the predicted alpha-helical structure of this region. As shown previously, addition of Fos strongly increases the affinity of Jun for DNA by forming a heterodimer. The jun down mutation (Asn 301 to Ala) also diminishes DNA binding by the Fos-Jun D heterodimer. These data strongly support the coiled coil conformation of this region where residues adjacent to the leucines are also important for dimer formation. Ultraviolet cross-linking experiments have shown that both Fos and Jun directly contact the TGACTCA palindromic sequence defined as a TPA (12-O-tetradecanoyl phorbol-13-acetate) response element or TRE. Both Jun homodimers and Jun-Fos heterodimers bind this TRE as well as the cAMP responsive element (CRE or TGACGTCA) with comparable affinities. While strong c-Jun or Jun D binding requires a perfect palindrome, Jun-Fos complexes can also efficiently recognize sequences where the right half of the palindrome is less conserved (TGACTAA or TGACGCA).     

Oligomerization properties of GCN4 leucine zipper e and g position mutants.

Putative intersubunit electrostatic interactions between charged amino acids on the surfaces of the dimer interfaces of leucine zippers (g-e'' ion pairs) have been implicated as determinants of dimerization specificity. To evaluate the importance of these ionic interactions in determining the specificity of dimer formation, we constructed a pool of > 65,000 GCN4 leucine zipper mutants in which all the e and g positions are occupied by different combinations of alanine, glutamic acid, lysine, or threonine. The oligomerization properties of these mutants were evaluated based on the phenotypes of cells expressing lambda repressor-leucine zipper fusion proteins. About 90% of the mutants do not form stable homooligomers. Surprisingly, approximately 8% of the mutant sequences have phenotypes consistent with the formation of higher-order (> dimer) oligomers, which can be classified into three types based on sequence features. The oligomerization states of mutants from two of these types were determined by characterizing purified fusion proteins. The Type I mutant behaved as a tetramer under all tested conditions, whereas the Type III mutant formed a variety of higher-order oligomers, depending on the solution conditions. Stable homodimers comprise less than 3% of the pool; several g-e'' positions in these mutants could form attractive ion pairs. Putative repulsive ion pairs are not found among the homodimeric mutants. However, patterns of charged residues at the e and g positions do not seem to be sufficient to predict either homodimer or heterodimer formation among the mutants.     

Dual DNA recognition codes of a short peptide derived from the basic leucine zipper protein EmBP1

Sequence-specific DNA binding of short peptide dimers derived from a plant basic leucine zipper protein EmBP1 was studied. A homodimer of the EmBP1 basic region peptide recognized a palindromic DNA sequence, and a heterodimer of EmBP1 and GCN4 basic region peptides targets a non-palindromic DNA sequence when a beta-cyclodextrin/adamantane complex is utilized as a dimerization domain. A homodimer of the EmBP1 basic region peptide binds the native EmBP1 binding 5'-GCCACGTGGC-3' and the native GCN4 binding 5'-ATGACGTCAT-3' sequences with almost equal affinity in the alpha-helical conformation, indicating that the basic region of EmBP1 by itself has a dual recognition codes for the DNA sequences. The GCN4 basic region peptide binds 5'-ATGAC-3' in the alpha-helical conformation, but it neither shows affinity nor helix formation with 5'-GCCAC-3'. Because native EmBP1 forms 100 times more stable complex with 5'-GCCACGTGGC-3' over 5'-ATGACGTCAT-3', our results suggest that the sequence-selectivity of native EmBP1 is dictated by the structure of leucine zipper dimerization domain including the hinge region spanning between the basic region and the leucine zipper.     

Stabilities of leucine zipper dimers estimated by an empirical free energy method.

The leucine zipper motif is a characteristic amino acid sequence found in dimeric DNA-binding proteins. Computer-generated models for leucine zippers were constructed as alpha-helical coiled dimers with leucine repeated every seventh residue. An empirical Gibbs free energy, delta G, function which incorporates hydrophobic force, electrostatic interactions, and conformational entropy loss as the major intermolecular interactions was used to estimate the delta G of dimer formation in fos, jun, and GCN4 zipper sequences. The calculations showed that complexes known to form stable homo- or heterodimers have favorable (negative) delta G, while other less stable complexes have unfavorable (positive) delta G. Leucines in position d of the coiled coil contribute large hydrophobic stabilization energies while residues in the a position contribute less to dimer stability. Hydrophobic contributions show little sequence specificity, however, and do not contribute significantly to homo/heterodimer preference. Charged residues in the e and g positions, on the other hand, determine homo/heterodimer specificity. In GCN4 homodimers, residues GLU el, Glu b2, Lys g2, and Lys e4 greatly contribute to dimer stability. The preferential stability of fos-jun heterodimer over the jun-jun and fos-fos homodimers is primarily due to the side chains Asp b1, Glu g1, Asp b2, Glu e2, Glu g2, Glu g3, and Lys a5 of the fos helix, and Arg c1, Lys g1, Lys b2, Lys e2, Arg e4, and Glu g4 of the jun helix.     

De novo simulations of the folding thermodynamics of the GCN4 leucine zipper.

Entropy Sampling Monte Carlo (ESMC) simulations were carried out to study the thermodynamics of the folding transition in the GCN4 leucine zipper (GCN4-lz) in the context of a reduced model. Using the calculated partition functions for the monomer and dimer, and taking into account the equilibrium between the monomer and dimer, the average helix content of the GCN4-lz was computed over a range of temperatures and chain concentrations. The predicted helix contents for the native and denatured states of GCN4-lz agree with the experimental values. Similar to experimental results, our helix content versus temperature curves show a small linear decline in helix content with an increase in temperature in the native region. This is followed by a sharp transition to the denatured state. van't Hoff analysis of the helix content versus temperature curves indicates that the folding transition can be described using a two-state model. This indicates that knowledge-based potentials can be used to describe the properties of the folded and unfolded states of proteins.