IS1 insertion generates duplication of a nine base pair sequence at its target site.

Three independent integrations of the E. coli insertion sequence, IS1, into the gal operon have been analyzed. DNA sequences of portions of the wild-type galT gene which act as the target sites for these insertions, as well as the corresponding gal/IS1 junctions, are reported. Two features are particularly noteworthy. First, similar sequences appearing in inverted orientation consitute the ends of IS1: 18 of the terminal 23 base pairs at each end are identical. Second, in all three insertions, a 9 base pair segment found once in the wild-type sequence at the site of insertion is duplicated and appears in the same orientation at each end of the inserted element. The sequence of this 9 base pair repeat is different for each insertion analyzed. No homology between the inverted repeat sequences at the ends of IS1 and the sequences of the target sites is observed. Models for the mechanism of IS1 insertion are proposed.     

An Acetobacter xylinum insertion sequence element associated with inactivation of cellulose production.

An insertion sequence (IS) element, IS1031, caused insertions associated with spontaneous cellulose deficient (Cel-) mutants of Acetobacter xylinum ATCC 23769. The element was discovered during hybridization analysis of DNAs from Cel- mutants of A. xylinum ATCC 23769 with pAXC145, an indigenous plasmid from a Cel- mutant of A. xylinum NRCC 17005. An IS element, IS1031B, apparently identical to IS1031, was identified on pAXC145. IS1031 is about 950 bp. DNA sequencing showed that the two elements had identical termini with inverted repeats of 24 bp containing two mismatches and that they generated 3-bp target sequence duplications. The A. xylinum ATCC 23769 wild type carries seven copies of IS1031. Southern hybridization showed that 8 of 17 independently isolated spontaneous Cel- mutants of ATCC 23769 contained insertions of an element homologous to IS1031. Most insertions were in unique sites, indicating low insertion specificity. Significantly, two insertions were 0.5 kb upstream of a recently identified cellulose synthase gene. Attempts to isolate spontaneous cellulose-producing revertants of these two Cel- insertion mutants by selection in static cultures were unsuccessful. Instead, pseudorevertants that made waxlike films in the liquid-air interface were obtained. The two pseudorevertants carried new insertions of an IS1031-like element in nonidentical sites of the genome without excision of the previous insertions. Taken together, these results suggest that indigenous IS elements contribute to genetic instability in A. xylinum. The elements might also be useful as genetic tools in this organism and related species.     

Transfer RNA Genes Are Genomic Targets for De Novo Transposition of the Yeast Retrotransposon Ty3

Insertions of the yeast element Ty3 resulting from induced retrotransposition were characterized in order to identify the genomic targets of transposition. The DNA sequences of the junctions between Ty3 and flanking DNA were determined for two insertions of an unmarked element. Each insertion was at position -17 from the 5' end of a tRNA-coding sequence. Ninety-one independent insertions of a marked Ty3 element were studied by Southern blot analysis. Pairs of independent insertions into seven genomic loci accounted for 14 of these insertions. The DNA sequence flanking the insertion site was determined for at least one member of each pair of integrated elements. In each case, insertion was at position -16 or -17 relative to the 5' end of one of seven different tRNA genes. This proportion of genomic loci used twice for Ty3 integration is consistent with that predicted by a Poisson distribution for a number of genomic targets roughly equivalent to the estimated number of yeast tRNA genes. In addition, insertions upstream of the same tRNA gene in one case were at different positions, but in all cases were in the same orientation. Thus, genomic insertions of Ty3 in a particular orientation are apparently specified by the target, while the actual position of the insertion relative to the tRNA-coding sequence can vary slightly.     

A frameshift mutation at the junction of an IS1 insertion within lacZ restores beta-galactosidase activity via formation of an active lacZ-IS1 fusion protein

The insertion of IS1 elements into lacZ results in the loss of beta-galactosidase activity, and such insertions exert a severe polar effect on the expression of the distal genes of the operon. In addition to these properties, the mutation lacZ::IS1-MS319 has the unique property of reversion to Lac+ (ts) spontaneously or after treatment with the frameshift mutagen ICR-191; such revertants retain the IS1 element. We have determined that the site of integration of IS1 into lacZ is at position 4338, 18 nucleotides from the end of the sequence encoding the C-terminus of beta-galactosidase. Reversion to Lac+ promoted by ICR-191 results from the loss of a G residue from a GGG sequence located at the junction of lacZ and IS1. As a result an active, but temperature-sensitive, lacZ-IS1 fusion protein is formed containing six amino acids derived from IS1 which replace six amino acids encoded by lacZ. The IS1 element in MS319 is a new member of the iso-IS1 family, which we designate IS1T.     

The sequence of the bacteriophage P1 genome region serving as hot target for IS2 insertion.

A restriction fragment of the bacteriophage P1 genome known to serve as a hot target for IS2 insertion in its host, Escherichia coli K12, was entirely sequenced. It is 1756 bp long and it contains four long open reading frames, all in the same orientation. The two middle frames overlap partially. Eight of the nine studied IS2 insertions affecting phage reproduction map within three of these reading frames. No common feature was found between the nine target sites which have served for IS2 integration. However, there are two structural elements which might possibly contribute to rendering the studied DNA segment a hot region for IS2 insertion. The first is formed by two neighbouring, 30 and 40 bp regions of homology with an internal segment of IS2. The second is the pentanucleotide 5' GGTAT3', which is carried nine times in the sequenced fragment and which is found always in at least one copy within a variable distance of less than 100 bp of each inserted IS2 element.     

Insertion element IS1 can generate a 10-base pair target duplication

Transposable element IS1 is known to generate mainly 9-bp and occasionally 8-bp target duplications upon transposition. We have isolated a plasmid pBR322 derivative having IS1 inserted into a site between the promoter and the structural gene for tetracycline resistance. DNA sequence analysis revealed that integration of this IS1 resulted in a 10-bp target duplication.     

Transposition in Shigella dysenteriae: isolation and analysis of IS911, a new member of the IS3 group of insertion sequences.

Twenty-nine clear-plaque mutants of bacteriophage lambda were isolated from a Shigella dysenteriae lysogen. Three were associated with insertions in the cI gene: two were due to insertion of IS600, and the third resulted from insertion of a new element, IS911. IS911 is 1,250 base pairs (bp) long, carries 27-bp imperfect terminal inverted repeats, and generates 3-bp duplications of the target DNA on insertion. It was found in various copy numbers in all four species of Shigella tested and in Escherichia coli K-12 but not in E. coli W. Analysis of IS911-mediated cointegrate molecules indicated that the majority were generated without duplication of IS911. They appeared to result from direct insertion via one end of the element and the neighboring region of DNA, which resembles a terminal inverted repeat of IS911. Nucleotide sequence analysis revealed that IS911 carries two consecutive open reading frames which code for potential proteins showing similarities to those of the IS3 group of elements.     

Identification, distribution, and sequence analysis of new insertion elements in Caulobacter crescentus.

We describe two insertion elements isolated from Caulobacter crescentus that are designated IS298 and IS511. These insertion elements were cloned from spontaneous flagellar (fla) gene mutants SC298 and SC511 derived from the wild-type strain CB15 (ATCC 19089), in which they were originally identified as insertions in the flbG operon of the hook gene cluster (N. Ohta, E. Swanson, B. Ely, and A. Newton, J. Bacteriol. 158:897-904, 1984). IS298 and IS511 were each present in C. crescentus CB2 and CB15 in at least four different positions, but neither was present in strain CB13 or in several Caulobacter species examined, including C. vibrioides, C. leidyia, and C. henricii. Nucleotide sequence analysis across the chromosome-insertion element junctions showed that IS298 is located 152 base pairs (bp) upstream from the ATG translation start of the hook protein gene flaK, where it is bounded by a 4-bp direct repeat derived from the site of insertion, and that IS511 is inserted at codon 186 of the flaK coding sequence, where it is also bounded by a 4-bp direct repeat duplicated from the site of insertion. The ilvB102 mutation in strain SC125 was also shown to result from insertion sequence IS511, but no duplication of the genomic sequence was present at the insertion element junctions. IS298 contains an imperfect terminal inverted repeat 16 bp long, and IS511 contains a 32-bp inverted repeat at the termini. IS298 and IS511 are the first insertion elements described in C. crescentus.     

Colonial variation and fimbriation of Actinobacillus actinomycetemcomitans

The Escherichia coli serB gene is divergently transcribed from the gene. Six independently isolated IS30 insertions within the 5' end of the serB structural gene resulted in increased expression of an smp'-lacZ gene fusion. DNA sequence analysis of two of the insertions suggests that a promoter was created upon IS30 insertion.     

Molecular genetic studies of the DNA promotor regions in Bacillus thuringiensis subsp. galleriae 69-6. II. Increased level of gene expression resulting from IS1 element integration

The 1.45 kb promoter containing HindIII fragment of Bacillus thuringiensis DNA promotes the expression of the tet gene of recombinant pPBT9 plasmid in Escherichia coli cells. Spontaneous mutants of this plasmid were isolated and analysed. They are responsible for an increase in the level of tetracycline resistance. This 3-fold increase resulted from integration of IS1 element into the bacillar promoter containing HindIII fragment, which led to formation of a mutant pPBT9::IS1 plasmid. The IS sequence integrated was defined as an IS1 element of the E. coli HB101 chromosomal DNA. The integration site of IS1 was localized.     

Characterization of the IS895 family of insertion sequences from the cyanobacterium Anabaena sp. strain PCC 7120.

A family of repetitive elements from the cyanobacterium Anabaena sp. strain PCC 7120 was identified through the proximity of one element to the psbAI gene. Four members of this seven-member family were isolated and shown to have structures characteristic of bacterial insertion sequences. Each element is approximately 1,200 bp in length, is delimited by a 30-bp inverted repeat, and contains two open reading frames in tandem on the same DNA strand. The four copies differ from each other by small insertions or deletions, some of which alter the open reading frames. By using a system designed to trap insertion elements, one of the elements, denoted IS895, was shown to be mobile. The target site was not duplicated upon insertion of the element. Two other filamentous cyanobacterial strains were also found to contain sequences homologous to IS895.     

The transposon Tn9 generates a 9 bp repeated sequence during integration.

We performed a genetic and sequencing analysis of insertions of the transposon Tn9 into the lac operon of E. coli. Genetic mapping of 70 insertions into lacl and Z shows that starting from the same point on the chromosome, Tn9 goes to at least 50 different points in these two genes. Although there are preferred regions for insertion, these consist of multiple integration points within a small area, as demonstrated by pairwise crosses and restriction mapping. Sequence analysis of three Tn9 insertions reveals that Tn9 integration is associated with a direct repeat of 9 base pairs (bp) of host sequence. We show that these extra 9 nucleotide pairs are generated upon insertion and not brought in with the element.     

A cloned immunoglobulin cDNA fragment enhances transposition of IS elements into recombinant plasmids.

Evidence is presented indicating that a novel DNA sequence arrangement generated by in vitro recombination may elicit high frequency transpositions of IS elements. A 109 bp Bam HI fragment of the cDNA for the immunoglobulin kappa light chain from MOPC 321 myeloma was cloned into the Bam HI site of pBR313. The cloned fragment extends from the codon for Gly 57 to the V-J junction. Insertions of IS1 or IS5 were identified in 6 of 50 plasmid DNAs isolated from freshly transformed clones. Additional transposition events were detected after subculturing for several growth cycles. Three independent insertions of IS1 occurred in the promoter region of the TcR operon. All IS5 and the remaining IS1 insertions were located in the TcR region upstream to the cloned DNA sequence. Sequences homologous to the ends of IS1, or corresponding to the consensus sequence at the target site of IS5 are present near the estimated sites of insertion of IS1 or IS5 respectively. Bacteria harboring recombinant plasmids carrying the cloned DNA in either orientation grew at a reduced rate relative to cells harboring pBR313, suggesting that fused gene products made from the two types of plasmid were inhibitory to cell growth. IS insertions, which relieved this inhibitory effect and thereby provided a selective advantage, were found exclusively in plasmids carrying the cloned DNA in only one of the two orientations. The fact that IS elements were not observed in the other type of recombinant plasmid indicates that selective pressure alone is not sufficient to account for the frequent IS insertions observed and that sequences at a distance from the site of IS insertion may be critical in the regulation of transposition frequency.     

Instability in tyrR Strains of Plasmids Carrying the Tyrosine Operon: Isolation and Characterization of Plasmid Derivatives with Insertions or Deletions

The transformation of tyrR strains of Escherichia coli with multicopy plasmids which carry the tyrosine operon gave rise to modified plasmids with either insertions or deletions. The effect of each of these insertions or deletions was to decrease the level of expression of this operon. It is proposed that plasmid instability arose as a direct consequence of the metabolic effects of an overproduction of the enzymes coded for by the tyrosine operon. The results have significant implications for the cloning of genes that are repressed by the product of a regulatory gene. Since the predominant plasmid modification observed was the insertion of an IS1 element near the regulatory region of the tyrosine operon, the results also suggest a role for IS1 elements in the regulation of gene expression.     

Bacterial Interspersed Mosaic Elements (Bimes) Are a Major Source of Sequence Polymorphism in Escherichia Coli Intergenic Regions Including Specific Associations with a New Insertion Sequence

A significant fraction of Escherichia coli intergenic DNA sequences is composed of two families of repeated bacterial interspersed mosaic elements (BIME-1 and BIME-2). In this study, we determined the sequence organization of six intergenic regions in 51 E. coli and Shigella natural isolates. Each region contains a BIME in E. coli K-12. We found that multiple sequence variations are located within or near these BIMEs in the different bacteria. Events included excisions of a whole BIME-1, expansion/deletion within a BIME-2 and insertions of non-BIME sequences like the boxC repeat or a new IS element, named IS1397. Remarkably, 14 out of 14 IS1397 integration sites correspond to a BIME sequence, strongly suggesting that this IS element is specifically associated with BIMEs, and thus inserts only in extragenic regions. Unlike BIMEs, IS1397 is not detected in all E. coli isolates. Possible relationships between the presence of this IS element and the evolution of BIMEs are discussed.