Purification and characterization of laccase secreted by Phellinus linteus MTCC-1175 and its role in the selective oxidation of aromatic methyl group

A laccase from the culture filtrate of Phellinus linteus MTCC-1175 has been purified to homogeneity. The method involved concentration of the culture filtrate by ammonium sulphate precipitation and an anion exchange chromatography on DEAE-cellulose. The SDS-PAGE and native-PAGE gave single protein band indicating that the enzyme preparation was pure. The molecular mass of the enzyme determined from SDS-PAGE analysis was 70 kDa. Using 2.6-dimethoxyphenol, 2.2′[azino-bis-(3-ethylbonzthiazoline-6-sulphonic acid) diammonium salt] (ABTS) and 4-hydroxy-3,5-dimethoxybenzaldehyde azine as the substrates, the K _m, k _cat and k _cat/K _m values of the laccase were found to be 160 μM, 6.85 s^?1, 4.28 × 10⁴ M^?1 s^?1, 42 μM, 6.85 s^?1, 16.3 × 10⁴ M^?1 s^?1 and 92 μM, 6.85 s^?1, 7.44 × 10⁴ M^?1 s^?1, respectively. The pH and the temperature optima of the P. linteus MTCC-1175 laccase were 5.0 and 45°C, respectively. The activation energy for thermal denaturation of the enzyme was 38.20 kJ/mole/K. The enzyme was the most stable at pH 5.0 after 1 h reaction. In the presence of ABTS as the mediator, the enzyme transformed toluene, 3-nitrotoluene and 4-chlorotoluene to benzaldehyde, 3-nitrobenzaldehyde and 4-chlorobenzaldehyde, respectively.     

Purification and characterization of yellow laccase from Trametes hirsuta MTCC-1171 and its application in synthesis of aromatic aldehydes

A yellow laccase from the culture filtrate of Trametes hirsuta MTCC-1171 has been purified. The purification methods involved concentration of the culture filtrate by ammonium sulphate precipitation and an anion exchange chromatography on diethylaminoethyl cellulose. The sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE) and native polyacrylamide gel electrophoresis gave single protein band indicating that the enzyme preparation was pure. The molecular mass of the enzyme determined from SDS-PAGE analysis was 55.0 kDa. Using 2,6-dimethoxyphenol, 2,2′[azino-bis-(3-ethylbonzthiazoline-6-sulphonic acid) diammonium salt] and 3,5-dimethoxy-4-hydroxybenzaldehyde azine as the substrates, the K_m, k_cat and k_cat/K_m values of the laccase were found to be 420 μM, 13.04 s⁻¹, 3.11 × 10⁴ M⁻¹ s⁻¹, 225 μM, 13.03 s⁻¹, 1.3 × 10⁵ M⁻¹ s⁻¹ and 100 μM, 13.04 s⁻¹, 5.8 × 10⁴ M⁻¹ s⁻¹, respectively. The pH and temperature optima were 4.5 and 60 °C, respectively while pH and temperature stabilities were pH 4.5 and 50 °C. The activation energy for thermal denaturation of the enzyme was 18.6 kJ/mol/K. The purified laccase has yellow colour and does not show absorption band around 610 nm like blue laccases. The purified laccase transforms toluene, 3-nitrotoluene, 4-nitrotoluene, 3-chlorotoluene, 4-chlorotoluene and 3,4-dimethoxytoluene to benzaldehyde, 3-nitrobenzaldehyde, 4-nitrobenzaldehyde, 3-chlorobenzaldehyde, 4-chlorobenzaldehyde and 3,4-dimethoxybenzaldehyde in the absence of mediator molecules in high yields.     

Purification and Characterization of a Novel (<Emphasis Type="Italic">R</Emphasis>)-1-Phenylethanol Dehydrogenase from <Emphasis Type="Italic">Lysinibacillus</Emphasis> sp. NUST506

A novel (R)-1-phenylethanol dehydrogenase was successfully purified from Lysinibacillus sp. NUST506 by preparative polyacrylamide gel electrophoresis. The enzyme is a NAD+-dependent oxidoreductase. The molecular weight of the (R)-1-phenylethanol dehydrogenase measured by SDS-PAGE was about 28 kDa. Furthermore, the optimal reaction conditions for the oxidative reaction were 70°C and pH 9.5 and for the reductive reaction were 65°C and pH 6.5. Under the optimal conditions, the K_M and k_cat values with (R)-1-phenylethanol as a substrate were found to be 0.78 mM and 123 s^–1 and with acetophenone they were 0.56 mM and 125 s^–1, respectively. The (R)-1-phenylethanol dehydrogenase became more stable at pH 9.5 in comparison with pH 5.0 and high stability was noticed at 4 and 37°C. Properties of the enzyme place it as a promising candidate for industrial applications.     

Production,characteristics and applications of phytase from a rhizosphere isolated <Emphasis Type="Italic">Enterobacter</Emphasis> sp. ACSS

Optimization of process parameters for phytase production by Enterobacter sp. ACSS led to a 4.6-fold improvement in submerged fermentation, which was enhanced further in fed-batch fermentation. The purified 62 kDa monomeric phytase was optimally active at pH 2.5 and 60 °C and retained activity over a wide range of temperature (40–80 °C) and pH (2.0–6.0) with a half-life of 11.3 min at 80 °C. The kinetic parameters K _m, V _max, K _cat, and K _cat/K _m of the pure phytase were 0.21 mM, 131.58 nmol mg^?1 s^?1, 1.64 × 10³ s^?1, and 7.81 × 10⁶ M^?1 s^?1, respectively. The enzyme was fairly stable in the presence of pepsin under physiological conditions. It was stimulated by Ca⁺², Mg⁺² and Mn⁺², but inhibited by Zn⁺², Cu⁺², Fe⁺², Pb⁺², Ba⁺² and surfactants. The enzyme can be applied in dephytinizing animal feeds, and the baking industry.     

Feruloyl esterase from <Emphasis Type="Italic">Alternaria tenuissima</Emphasis> that hydrolyses lignocellulosic material to release hydroxycinnamic acids

An extracellular feruloyl esterase from the culture filtrates of the isolated fungus Alternaria tenuissima was successfully purified to apparent homogeneity by anion-exchange and size-exclusion chromatography. Peptide fragments of purified enzyme (designated as AltFAE; molecular weight of 30.3 kDa determined by SDS-PAGE) were identified by mass spectrometry using a NanoLC-ESI-MS/MS system. Michaelis-Menten constants (K_M) and catalytic efficiencies (k_cat/K_M) were determined for typical substrates of feruloyl esterase, and the lowest K_M of 50.6 μM (i.e., the highest affinity) and the highest k_cat/K_M (3.1 × 10⁵ s^—1 M^–1) were observed for methyl ^p-coumarate and methyl ferulate, respectively. Not least, AltFAE catalyzed conversion of lignocellulosic material (e.g. wood meal) to release hydroxycinnamic products, i.e. ferulic- and ^p-coumaric acids.     

Purification and characterisation of lignin peroxidase from <Emphasis Type="Italic">Pycnoporus sanguineus</Emphasis> MTCC-137

Extracellular secretion of lignin peroxidase from Pycnoporus sanguineus MTCC-137 in the liquid culture growth medium amended with lignin containing natural sources has been shown. The maximum secretion of lignin peroxidase has been found in the presence of saw dust. The enzyme has been purified to homogeneity from the culture filtrate of the fungus using ultrafiltration and anion exchange chromatography on DEAE-cellulose. The purified lignin peroxidase gave a single protein band in sodium dodecylsulphate polyacrylamide gel electrophoresis corresponding to the molecular mass 40 kDa. The K _m, k _cat and k _cat/K _m values of the enzyme using veratryl alcohol and H₂O₂ as the substrate were 61 M, 2.13 s⁻¹, 3.5 × 10⁴ M⁻¹s⁻¹ and 71 M, 2.13 s⁻¹, 3.0 × 10⁴ M⁻¹ s⁻¹ respectively at the optimum pH of 2.5. The temperature optimum of the enzyme was 25°C.     

Characterization of a mildly alkalophilic and thermostable recombinant <Emphasis Type="Italic">Thermus thermophilus</Emphasis> laccase with applications in decolourization of dyes

Objective

To examine the potential for applications of TthLAC, a monomeric (~ 53 kDa) laccase encoded by the genome of Thermus thermophilus (strain HB 27) which can be produced at low cost in Escherichia coli.

Result

Functional, thermostable and mildly alkalophilic TthLAC of high purity (> 90%) was produced through simple heating of suspended (TthLAC overexpressing) E.coli cells at 65 °C. For reactions of short duration (< 1 h) the temperature for optimal activity is ~ 90 °C. However, TthLAC undergoes slow partial unfolding and thermal inactivation above 65 °C, making it unsuitable for long incubations above this temperature. With different substrates, optimal function was observed from pH 6 to 8. With the substrate, ABTS, catalytic efficiency (K _m) and maximum velocity (V_max) at 60 °C and pH 6.0 were determined to be 2.4 × 10³ µM and 0.04 × 10³ µM/min respectively. Ultra-pure, affinity-purified TthLAC was used to confirm and characterize the enzyme’s ability to oxidize known (laccase) substrates such as ABTS, syringaldazine and 4-fluoro-2-methylphenol. TthLAC decoloured up to six different industrial dyes, with or without the use of redox mediators such as ABTS.

Conclusions

Unlike versatile laccases from most other sources, which tend to be thermolabile as well as acidophilic, TthLAC is a versatile, thermostable, mildly alkalophilic laccase which can be produced at low cost in E.coli for various redox applications.

     

Kinetics of N-substituted phenothiazines and N-substituted phenoxazines oxidation catalyzed by fungal laccases

Laccase-catalyzed oxidation of N-substituted phenothiazines and N-substituted phenoxazines was investigated at pH 5.5 and 25°C. The recombinant laccase from Polyporus pinsitus (rPpL) and the laccase from Myceliophthora thermophila (rMtL) were used. The dependence of initial reaction rate on substrate concentration was analyzed by applying the laccase action scheme in which the laccase native intermediate (NI) reacts with a substrate forming reduced enzyme. The reduced laccase produces peroxide intermediate (PI) which in turn decays to the NI. The calculated constant (k_ox) values of the PI formation are (6.1±3.1)×10⁵ M⁻¹s⁻¹ for rPpL and (2.5±0.9)×10⁴ M⁻¹s⁻¹ for rMtL. The bimolecular constants of the reaction of the native intermediate with electron donor (kred) vary in the interval from 2.2×10⁵ to 2.1×10⁷ M⁻¹s⁻¹ for rPpL and from 1.3×10² to 1.8×10⁵ M^-1s⁻¹ for rMtL. The larger reactivity of rPpL in comparison to rMtL is associated with the higher redox potential of type I Cu of rPpL. The variation of k_red values for both laccases correlates with the change of the redox potential of substrates. Following outer sphere (Marcus) electron transfer mechanism the calculated activationless electron transfer rate and the apparent reorganization energy are 5.0×107 M⁻¹s⁻¹ and 0.29 eV, respectively.     

Characterization of a novel <Emphasis Type="Italic">Acinetobacter baumannii</Emphasis> xanthine dehydrogenase expressed in <Emphasis Type="Italic">Escherichia coli</Emphasis>

Objective

To characterize a novel xanthine dehydrogenase (XDH) from Acinetobacter baumannii by recombinant expression in Escherichia coli and to assess its potential for industrial applications.

Results

The XDH gene cluster was cloned from A. baumannii CICC 10254, expressed heterologously in E. coli and purified to homogeneity. The purified recombinant XDH consisted of two subunits with the respective molecular weights of 87 kDa and 56 kDa according to SDS-PAGE. XDH catalysis was optimum at pH 8.5 and 40–45 °C, was stable under alkaline conditions (pH 7–11) and the half-inactivation temperature was 60 °C. The K _m, turnover number and catalytic efficiency for xanthine were 25 μM, 69 s^?1 and 2.7 μM^?1 s^?1, respectively, which is an improvement over XDHs characterized previously. A. baumannii XDH is less than 50 % identical to previously identified XDH orthologs from other species, and is the first from the Acinetobacter genus to be characterized.

Conclusion

The novel A. baumannii enzyme was found to be among the most active, thermostable and alkaline-tolerant XDH enzymes reported to date and has potential for use in industrial applications.

     

The nitrite reductase activity of horse heart carboxymethylated-cytochrome <Emphasis Type="Italic">c</Emphasis> is modulated by cardiolipin

Horse heart carboxymethylated cytc (CM-cytc) displays myoglobin-like properties. Here, the effect of cardiolipin (CL) liposomes on the nitrite reductase activity of ferrous CM-cytc [CM-cytc-Fe(II)], in the presence of sodium dithionite, is reported between pH 5.5 and 7.6, at 20.0 °C. Cytc-Fe(II) displays a very low value of the apparent second-order rate constant for the NO₂ ^?-mediated conversion of cytc-Fe(II) to cytc-Fe(II)-NO [k _on = (7.3 ± 0.7) × 10^?2 M^?1 s^?1; at pH 7.4], whereas the value of k _on for NO₂ ^? reduction by CM-cytc-Fe(II) is 1.1 ± 0.2 M^?1 s^?1 (at pH 7.4). CL facilitates the NO₂ ^?-mediated nitrosylation of CM-cytc-Fe(II) in a dose-dependent manner, the value of k _on for the NO₂ ^?-mediated conversion of CL–CM-cytc-Fe(II) to CL–CM-cytc-Fe(II)-NO (5.6 ± 0.6 M^?1 s^?1; at pH 7.4) being slightly higher than that for the NO₂ ^?-mediated conversion of CL–cytc-Fe(II) to CL–cytc-Fe(II)-NO (2.6 ± 0.3 M^?1 s^?1; at pH 7.4). The apparent affinity of CL for CM-cytc-Fe(II) is essentially pH independent, the average value of B being (1.3 ± 0.3) × 10^?6 M. In the absence and presence of CL liposomes, the nitrite reductase activity of CM-cytc-Fe(II) increases linearly on lowering pH and the values of the slope of the linear fittings of Log k _on versus pH are ?1.05 ± 0.07 and ?1.03 ± 0.03, respectively, reflecting the involvement of one proton for the formation of the transient ferric form, NO, and OH^?. These results indicate that Met80 carboxymethylation and CL binding cooperate in the stabilization of the highly reactive heme-Fe atom of CL–CM-cytc.     

Heterologous expression and characterisation of a laccase from <Emphasis Type="Italic">Colletotrichum lagenarium</Emphasis> and decolourisation of different synthetic dyes

Laccases have received considerable attention in recent decades because of their ability to oxidise a large spectrum of phenolic and non-phenolic organic substrates and highly recalcitrant environmental pollutants. In this research, a laccase gene from Colletotrichum lagenarium was chemically synthesised using yeast bias codons and expressed in Pichia pastoris. The molecular mass of the recombinant laccase was estimated to be 64.6 kDa by SDS–PAGE, and the enzyme exhibited maximum activity at pH 3.6–4.0 but more stability in buffer with higher pH (>pH 3.6). The optimal reaction temperature of the enzyme was 40 °C, beyond which stability significantly decreased. By using 2,2′-azino-bis-(3-ethylbenzothiazoline)-6-sulphonate (ABTS) as a substrate, K _m and V _max values of 0.34 mM and 7.11 mM min^?1 mg^?1, respectively, were obtained. Using ABTS as a mediator, the laccase could oxidise hydroquinone to p-benzoquinone and decolourise the synthetic dyes malachite green, crystal violet and orange G. These results indicated that the laccase could be used to treat industrial effluents containing artificial dyes.     

Cloning,expression, and characterization of a thermostable glucose-6-phosphate dehydrogenase from <Emphasis Type="Italic">Thermoanaerobacter tengcongensis</Emphasis>

Glucose-6-phosphate dehydrogenases (G6PDs) are important enzymes widely used in bioassay and biocatalysis. In this study, we reported the cloning, expression, and enzymatic characterization of G6PDs from the thermophilic bacterium Thermoanaerobacter tengcongensis MB4 (TtG6PD). SDS-PAGE showed that purified recombinant enzyme had an apparent subunit molecular weight of 60 kDa. Kinetics assay indicated that TtG6PD preferred NADP⁺ (k _cat/K _m = 2618 mM^?1 s^?1, k _cat = 249 s^?1, K _m = 0.10 ± 0.01 mM) as cofactor, although NAD⁺ (k _cat/K _m = 138 mM^?1 s^?1, k _cat = 604 s^?1, K _m = 4.37 ± 0.56 mM) could also be accepted. The K _m values of glucose-6-phosphate were 0.27 ± 0.07 mM and 5.08 ± 0.68 mM with NADP⁺ and NAD⁺ as cofactors, respectively. The enzyme displayed its optimum activity at pH 6.8–9.0 for NADP⁺ and at pH 7.0–8.6 for NAD⁺ while the optimal temperature was 80 °C for NADP⁺ and 70 °C for NAD⁺. This was the first observation that the NADP⁺-linked optimal temperature of a dual coenzyme-specific G6PD was higher than the NAD⁺-linked and growth (75 °C) optimal temperature, which suggested G6PD might contribute to the thermal resistance of a bacterium. The potential of TtG6PD to measure the activity of another thermophilic enzyme was demonstrated by the coupled assays for a thermophilic glucokinase.     

Cloning and characterization of a novel amidase from <Emphasis Type="Italic">Paracoccus</Emphasis> sp. M-1, showing aryl acylamidase and acyl transferase activities

A novel amidase gene, designated pamh, was cloned from Paracoccus sp. M-1. Site-directed mutagenesis and bioinformatic analysis showed that the PamH protein belonged to the amidase signature enzyme family. PamH was expressed in Escherichia coli, purified, and characterized. The molecular mass of PamH was determined to be 52 kDa with an isoelectric point of 5.13. PamH displayed its highest enzymatic activity at 45°C and at pH 8.0 and was stable within a pH range of 5.0–10.0. The PamH enzyme exhibited amidase activity, aryl acylamidase activity, and acyl transferase activity, allowing it to function across a very broad substrate spectrum. PamH was highly active on aromatic and short-chain aliphatic amides (benzamide and propionamide), moderately active on amino acid amides, and possessed weak urease activity. Of the anilides examined, only propanil was a good substrate for PamH. For propanil, the k _cat and K _m were 2.8 s^?1 and 158 μM, respectively, and the catalytic efficiency value (k _cat/K _m) was 0.018 μM^?1 s^?1. In addition, PamH was able to catalyze the acyl transfer reaction to hydroxylamine for both amide and anilide substrates, including acetamide, propanil, and 4-nitroacetanilide; the highest reaction rate was shown with isobutyramide. These characteristics make PamH an excellent candidate for environmental remediation and an important enzyme for the biosynthesis of novel amides.     

Cloning and characterization of two distinct water-forming NADH oxidases from <Emphasis Type="Italic">Lactobacillus pentosus</Emphasis> for the regeneration of NAD

Two uncharacterized nicotinamide adenine dinucleotide (NADH) oxidases (named as LpNox1, LpNox2) from Lactobacillus pentosus ATCC 8041 were cloned and overexpressed in Escherichia coli BL21 (DE3). The sequence analysis revealed that the two enzymes are water-forming Noxs with 64 % and 52 % identity to LbNox from Lactobacillus brevis DSM 20054. The optimal pH and temperature of the purified LpNox1 and LpNox2 were 7.0 and 8.0 and 35 and 40 °C, respectively, with K _M of 99.0 μM (LpNox1) and 27.6 μM (LpNox2), and yielding catalytic efficiency k _cat/K _M of 1.0 and 0.2 μM^?1 s^?1, respectively. Heat inactivation studies revealed that the two enzymes are relatively instable. The application of LpNox1 for the regeneration of NAD⁺ was demonstrated by coupling with a glycerol dehydrogenase-catalyzed oxidation of glycerol to 1,3-dihydroxyacetone. The characteristics of the LpNox1 could prove to be of interest in industrial application such as NAD⁺ regeneration in dehydrogenase-catalyzed oxidations.     

Production,purification and partial characterisation of a novel laccase from the white-rot fungus <Emphasis Type="Italic">Panus tigrinus</Emphasis> CBS 577.79

Extracellular laccase from Panus tigrinus CBS 577.79 was produced in a bubble-column reactor using glucose-containing medium supplemented with 2,5-xylidine under conditions of nitrogen sufficiency. The main laccase isoenzyme was purified to apparent homogeneity by ultra-filtration, anion-exchange chromatography and gel filtration that led to a purified enzyme with a specific activity of 317 IU (mg protein)⁻¹ and a final yield of 66%. Laccase was found to be a monomeric protein with a molecular mass of 69.1 kDa, pI of 3.15 and 6.9% N-glycosylation of the high mannose type. Temperature and pH optima were 55°C and 3.75 (2,6-dimethoxyphenol as substrate). At 50 and 60°C, the enzyme half-lives were 281 and 25 min, respectively. The P. tigrinus laccase oxidized a wide range of both naturally occurring and synthetic aromatic compounds: the highest catalytic efficiencies were for 2,2′-azinobis-(3-ethylbenzthiazoline-6-sulfonic) acid and 2,6-dimethoxyphenol (5.99 × 10⁶ and 3.07 × 10⁶ M⁻¹ s⁻¹, respectively). Catalytic rate constants for typical N–OH redox mediators, such as 1-hydroxybenzotriazole (2.6 s⁻¹), violuric acid (8.4 s⁻¹) and 2,2,6,6-tetramethylpiperidin-N-oxide radical (7.8 s⁻¹), were found to be higher than those reported for other high redox potential fungal laccases.     

Properties of native and hydrophobic laccases immobilized in the liquid-crystalline cubic phase on electrodes

Both native Trametes hirsuta laccase and the same laccase modified with palmytic chains to turn it more hydrophobic were prepared and studied with cyclic voltammetry and Raman spectroscopy. Native laccase immobilized in the monoolein cubic phase was characterized with resonance Raman spectroscopy, which demonstrated that the structure at the “blue” copper site of the protein remained intact. The diamond-type monoolein cubic phase prevents denaturation of enzymes on the electrode surface and provides contact of the enzyme with the electrode either directly or through the mediation by electroactive probes. Direct electron transfer for both laccases incorporated into a lyotropic liquid crystal was obtained under anaerobic conditions, whereas bioelectrocatalytic activity was shown only for the native enzyme. The differences in electrochemical behavior of native and hydrophobic laccase as well as possible mechanisms of direct and mediated electron transfers are discussed. The Michaelis constant for 2,2′-azinobis(3-ethylbenzothiazoline-6-sulfonate) diammonium salt (ABTS²⁻), K _M^app, and the maximal current, I _max, for the native enzyme immobilized onto the electrode were estimated to be 0.24 mM, and 5.3 μA, respectively. The maximal current density and the efficiency of the catalysis, I _max/K _M^app, were found to be 73 μA cm⁻² and 208.2 μA cm⁻² mM⁻¹, respectively, and indicated a high efficiency of oxygen electroreduction by the enzyme in the presence of ABTS²⁻ in the cubic-phase environment. Rate constants were calculated to be 7.5 × 10⁴ and 3.6 × 10⁴ M⁻¹ s⁻¹ for native and hydrophobic laccase, respectively.     

Gas exchanges of an endangered species <Emphasis Type="Italic">Syringa pinnatifolia</Emphasis> and a widespread congener <Emphasis Type="Italic">S. oblata</Emphasis>

Net photosynthetic rate (P_N), transpiration rate (E), water use efficiency (WUE), stomatal conductance (g_s), and stomatal limitation (L_s) were investigated in two Syringa species. The saturation irradiance (SI) was 400 µmol m^-2s^-1 for S. pinnatifolia and 1 700 µmol m^-2s^-1 for S. oblata. Compared with S. oblata, S. pinnatifolia had extremely low g _s . Unlike S. oblata, the maximal photosynthetic rate (P_max) in S. pinnatifoliaoccurred around 08:00 and then fell down, indicating this species was sensitive to higher temperature and high photosynthetic photon flux density. However, such phenomenon was interrupted by the leaf development rhythms before summer. A relatively lower P_N together with a lower leaf area and shoot growth showed the capacity for carbon assimilation was poorer in S. pinnatifolia.     

A calcium-stimulated serine peptidase from a true-branching cyanobacterium, <Emphasis Type="Italic">Westiellopsis ramosa</Emphasis> sp. nov.

Unbranched heterocytous cyanobacteria produce a number of serine peptidases. We have characterized several peptidases in the cell-free extracts of a true-branched N₂-fixing cyanobacterium, Westiellopsis ramosa sp. nov. Upon substrate-gel zymography of intact filaments and heterocytes, five peptidase bands were resolved, whereas in vegetative cells, a single band was discernible. No band was detected in \({\text{NO}}_{3}^{ - } /{\text{NH}}_{4}^{ + }\)-grown cultures suggesting that the peptidases were present under diazotrophic conditions with much of them confined to heterocytes. Using salt precipitation and chromatography, a caseinolytic peptidase, called Wrp49, was purified which also demonstrated fibrinolytic activity. In SDS-PAGE, the purified peptidase was resolved into 17 and 27 kDa fragments. The enzyme in its native state exhibited M_r ≈ 49 kDa, and digested gelatin in a substrate gel at a corresponding position. The enzyme showed amidolytic activity on a plasmin specific substrate, D-Val-Leu-Lys p-nitroanilide. Moreover, a trypsin specific substrate, N-benzoyl-DL-Arg p-nitroanilide was hydrolyzed at an apparent K_m = 0.195 mM and V_max = 5 × 10^?7 M s^?1. The enzyme was stable in a wide pH and temperature range. While Ca²⁺ stimulated the activity; phenylmethane sulfonyl fluoride, leupeptin, EDTA and chelants were inhibitory. The activity of the EDTA-inactivated enzyme was completely restored upon adding Ca²⁺, suggesting that both compounds competed with each other in modulating the enzyme activity. The enzyme showed similarities with a Ca²⁺ stimulated subtilisin-like serine peptidase of Anabaena variabilis ATCC 29413, but also presented several unique features of metallopeptidases, such as the chelant’s response. Moreover, the N-terminal sequence (MTVENLARTGVGPGWR) did not match with any of the known peptidases.     

Decolorization of textile dye RB19 using volcanic rock matrix immobilized <Emphasis Type="Italic">Bacillus thuringiensis</Emphasis> cells with surface displayed laccase

A triplicate volcanic rock matrix–Bacillus thuringiensis–laccase WlacD (VRMs–Bt–WlacD) dye decolorization system was developed. WlacD was displayed on the B. thuringiensis MB174 cell surface to prepare a whole-cell laccase biocatalyst by using two repeat N-terminal domains of autolysin Mbg (Mbgn)₂ as the anchoring motif. Immunofluorescence microscopic assays confirmed that the fusion protein (Mbgn)₂–WlacD was anchored on the surface of the recombinant B. thuringiensis MB174. After optimization by a single factor test, L ₉(3⁴)-orthogonal test, Plackett–Burman test, steepest ascent method, and Box–Behnken response surface methodology, the whole-cell specific laccase activity of B. thuringiensis MB174 was improved to 555.2 U L^?1, which was 2.25 times than that of the primary culture condition. Optimized B. thuringiensis MB174 cells were further adsorbed by VRMs to prepare VRMs–Bt–WlacD, an immobilized whole-cell laccase biocatalyst. Decolorization capacity of as-prepared VRMs–Bt–WlacD toward an initial concentration of 500 mg L^?1 of an textile dye reactive blue 19 (RB19) aqueous solution reached 72.36% at a solid-to-liquid ratio of 10 g–100 mL. Repeated decolorization-activation operations showed the high decolorization capacity of VRMs–Bt–WlacD and have the potential for large-scale or continuous operations.