Optical resolution and mechanism using enantioselective cellulose,sodium alginate and hydroxypropyl‐β‐cyclodextrin membranes

Chiral solid membranes of cellulose, sodium alginate, and hydroxypropyl‐β‐cyclodextrin were prepared for chiral dialysis separations. After optimizing the membrane material concentrations, the membrane preparation conditions and the feed concentrations, enantiomeric excesses of 89.1%, 42.6%, and 59.1% were obtained for mandelic acid on the cellulose membrane, p ‐hydroxy phenylglycine on the sodium alginate membrane, and p ‐hydroxy phenylglycine on the hydroxypropyl‐β‐cyclodextrin membrane, respectively. To study the optical resolution mechanism, chiral discrimination by membrane adsorption, solid phase extraction, membrane chromatography, high‐pressure liquid chromatography ultrafiltration were performed. All of the experimental results showed that the first adsorbed enantiomer was not the enantiomer that first permeated the membrane. The crystal structures of mandelic acid and p ‐hydroxy phenylglycine are the racematic compounds. We suggest that the chiral separation mechanism of the solid membrane is “adsorption – association – diffusion,” which is able to explain the optical resolution of the enantioselective membrane. This is also the first report in which solid membranes of sodium alginate and hydroxypropyl‐β‐cyclodextrin were used in the chiral separation of p ‐hydroxy phenylglycine.     

A hybrid process for chiral separation of compound‐forming systems

The resolution of chiral compound‐forming systems using hybrid processes was discussed recently. The concept is of large relevance as these systems form the majority of chiral substances. In this study, a novel hybrid process is presented, which combines pertraction and subsequent preferential crystallization and is applicable for the resolution of such systems. A supported liquid membrane applied in a pertraction process provides enantiomeric enrichment. This membrane contains a solution of a chiral compound acting as a selective carrier for one of the enantiomers. Screening of a large number of liquid membranes and potential carriers using the conductor‐like screening model for realistic solvation method led to the identification of several promising carriers, which were tested experimentally in several pertraction runs aiming to yield enriched (+)‐(S)‐mandelic acid (MA) solutions from racemic feed solutions. The most promising system consisted of tetrahydronaphthalene as liquid membrane and hydroquinine‐4‐methyl‐2‐quinolylether (HMQ) as chiral carrier achieving enantiomeric excesses of 15% in average. The successful production of (+)‐(S)‐MA with a purity above 96% from enriched solutions by subsequent preferential crystallization proved the applicability of the hybrid process. Chirality, 2011. © 2010 Wiley‐Liss, Inc.     

Enantioseparation of N-protected α-amino acid derivatives by liquid-liquid extraction technique employing stereoselective ion-pair formation with a carbamoylated quinine derivative

Two-phase liquid-liquid extraction experiments were undertaken to study the enantioselective transport of the chiral N-protected α-amino acid derivatives from an aqueous buffer solution into an organic phase employing highly lipophilic carbamoylated quinine as chiral selector and phase transfer carrier, respectively. The chiral separation, derived from enantioselective ion-pair formation and differential solubility in the aqueous and organic phases of diastereomeric associates thus formed has been shown to be primarily dependent on the structure of the selectand, the nature of the organic solvent, the molar ratio of a given chiral selector to selectand in the two phases, and the pH of the aqueous phase. Extracted enantiomers were recovered by back-extraction using a relatively polar acidic medium in which the selector is barely insoluble. Thus, the enantiomeric purity of N-(3,5-dinitrobenzoyl)-leucine exceeded 95% enantiomeric excess with 70% overall yield with a single extraction and back-extraction step. Chirality 9:268–273, 1997. © 1997 Wiley-Liss, Inc.     

Enantiomeric impurities in chiral catalysts,auxiliaries, and synthons used in enantioselective syntheses. Part 5

The enantiomeric excess of chiral starting materials is one of the important factors determining the enantiopurity of products in asymmetric synthesis. Fifty‐one commercially available chiral reagents used as building blocks, catalysts, and auxiliaries in various enantioselective syntheses were assayed for their enantiomeric purity. The test results were classified within five impurities level (ie, <0.01%, 0.01%‐0.1%, 0.1%‐1%, 1%‐10%, >10%). Previously from 1998 to 2013, several reports have been published on the enantiomeric composition of more than 300 chiral reagents. This series of papers is necessitated by the fact that new reagents are forthcoming and that the enantiomeric purity of the same reagent can vary from batch to batch and/or from supplier to supplier. This report presents chiral liquid chromatography (LC) and gas chromatography (GC) methods to separate enantiomers of chiral compounds and evaluate their enantiomeric purities. The accurate and efficient LC analysis was done using newly introduced superficially porous particle (SPP 2.7 μm) based chiral stationary phases (TeicoShell, VancoShell, LarihcShell‐P, and NicoShell).     

Enantioselective synthesis of (R)‐Cinacalcet via cobalt‐catalysed asymmetric Negishi cross‐coupling

A novel enantioselective synthesis of (R)‐cinacalcet with 99% enantiomeric excesses (ee) has been achieved. The main strategies of the approach include a gram‐scale cobalt‐catalysed asymmetric cross‐coupling of racemic ester with arylzinc reagent, Hoffman‐type rearrangement of acidamide, the amidation of chiral amine, and improving the ee of chiral amide from 87% to 99% via recrystallization.     

Effect of mass transfer limitations on the enzymatic kinetic resolution of epoxides in a two-liquid-phase system

Optically active epoxides can be obtained by kinetic resolution of racemic mixtures using enantioselective epoxide hydrolases. To increase the productivity of the conversion of sparingly aqueous soluble epoxides, we investigated the use of a two-phase aqueous/organic system. A kinetic model which takes into account interphase mass transfer, enzymatic reaction, and enzyme inactivation was developed to describe epoxide conversion in the system by the epoxide hydrolase from Agrobacterium radiobacter. A Lewis cell was used to determine model parameters and results from resolutions carried out in the Lewis cell were compared to model predictions to validate the model. It was found that n-octane is a biocompatible immiscible solvent suitable for use as the organic phase. Good agreement between the model predictions and experimental data was found when the enzyme inactivation rate was fitted. Simulations showed that mass transfer limitations have to be avoided in order to maximize the yield of enantiomerically pure epoxide. Resolution of a 39 g/L solution of racemic styrene oxide in octane was successfully carried out in an emulsion batch reactor to obtain (S)-styrene oxide in high enantiomeric excess (>95% e.e.) with a yield of 30%.     

Emulsion liquid membrane extraction of lactic acid from aqueous solutions and fermentation broth

Studies on the batch extraction of lactic acid using an emulsion liquid membrane system are reported. The membrane phase consists of the tertiary amine carrier Alamine 336 and the surfactant Span 80 dissolved in n-heptane/paraffin and aqueous solutions of sodium carbonate in the internal phase. The effects of internal phase reagent, extraction temperature, and initial external phase pH on the extraction efficiency and the emulsion swelling are examined. A statistical factorial experiment on extraction from clarified lactic acid fermentation broth was carried out to obtain knowledge of the performance of the extraction system from a broth. The extraction efficiency from the fermentation broth is found to be lower as compared to aqueous solutions of pure lactic acid. The effect of pH and the presence of other ionic species on selectivity are discussed. (c) 1993 John Wiley & Sons, Inc.     

High‐performance liquid chromatography separation of enantiomers of mandelic acid and its analogs on a chiral stationary phase

The enantiomers of mandelic acid and its analogs have been chromatographically separated on a chiral stationary phase (CSP) derived from 4‐(3,5‐dinitrobenzamido) tetrahydrophenanthrene. The rationale of separations of these compounds is discussed with respect to the method development for determining enantiomeric purity and possibility of obtaining enantiomerically pure materials by high‐pressure liquid chromatography. The relationship of analyte structure to the extent of enantiomeric separation has been examined and separation factors (α) are presented for various groups of structurally related compounds. Chiral recognition models have been suggested to account for the observed separations. These models provide mechanistic insights into the chiral recognition process. Chirality 2010. © 2009 Wiley‐Liss, Inc.     

Chromatographic separation of three monoclonal antibody variants using multicolumn countercurrent solvent gradient purification (MCSGP)

Multicolumn countercurrent solvent gradient purification (MCSGP) is a continuous chromatographic process developed in recent years (Aumann and Morbidelli, 2007a; Aumann et al., 2007) that is particularly suited for applications in the field of bioseparations. Like batch chromatography, MCSGP is suitable for three-fraction chromatographic separations and able to perform solvent gradients but it is superior in terms of solvent consumption, yield, purity, and productivity due to the countercurrent movement of the liquid and the solid phases. In this work, the MCSGP process is applied to the separation of three monoclonal antibody variants on a conventional preparative cation exchange resin. The experimental process performance was compared to simulations based on a lumped kinetic model. Yield and purity values of the target variant of 93%, respectively were obtained experimentally. The batch reference process was clearly outperformed by the MCSGP process.     

Evaluation of the Edman degradation product of vancomycin bonded to core‐shell particles as a new HPLC chiral stationary phase

A modified macrocyclic glycopeptide‐based chiral stationary phase (CSP), prepared via Edman degradation of vancomycin, was evaluated as a chiral selector for the first time. Its applicability was compared with other macrocyclic glycopeptide‐based CSPs: TeicoShell and VancoShell. In addition, another modified macrocyclic glycopeptide‐based CSP, NicoShell, was further examined. Initial evaluation was focused on the complementary behavior with these glycopeptides. A screening procedure was used based on previous work for the enantiomeric separation of 50 chiral compounds including amino acids, pesticides, stimulants, and a variety of pharmaceuticals. Fast and efficient chiral separations resulted by using superficially porous (core‐shell) particle supports. Overall, the vancomycin Edman degradation product (EDP) resembled TeicoShell with high enantioselectivity for acidic compounds in the polar ionic mode. The simultaneous enantiomeric separation of 5 racemic profens using liquid chromatography‐mass spectrometry with EDP was performed in approximately 3 minutes. Other highlights include simultaneous liquid chromatography separations of rac‐amphetamine and rac‐methamphetamine with VancoShell, rac‐pseudoephedrine and rac‐ephedrine with NicoShell, and rac‐dichlorprop and rac‐haloxyfop with TeicoShell.     

Enzymatic and chromatographic chiral discrimination of racemic (thio)glycidyl esters: Part I. A chemoenzymatic approach to both enantiomers of thioglycidyl esters

Both hitherto unknown (+)-(R)- and (?)-(S)-thioglycidyl esters, (R)-( 2 ) and (S)-( 2 ), have been synthesized with different high enantiomeric excesses (ee) by two routes from the corresponding rac-glycidyl esters rac-( 1 ). The first includes a porcine pancreatic lipase (PPL)-mediated kinetic resolution of these esters followed by sulfuration with practically complete inversion to the (+)-(R)-enantiomer (+)-(R)-( 2 ) (36–86% ee). (?)-(S)-Thioglycidyl esters (?)-(S)-( 2 ) are obtained by the reverse reaction sequence (43–80% ee). In the latter case the hydrolysis rate is lower than that of analogous glycidyl esters. Moreover, the dependence of enantiomeric excess on the size of the acyl-group is of the opposite tendency. Therefore, in both cases suitable selection of the acid residue gives rise to maximum enantioselectivity. The irreversible lipase-catalyzed acylation of rac-glycidol and rac-thioglycidol, however, was found to be a less suitable alternative. The enantiomeric excess of recovered homochiral esters was determined by chiral chromatography using modified cellulose stationary phases (OB, OD). © 1993 Wiley-Liss, Inc.     

利用乳化液膜分离丙氨酸的研究

对乳化液膜技术分离丙氨酸进行了实验研究,从而探索了从味精生产过程的。第二次等电点结晶母液”中回收丙氨酸的新途径。采用二(2-乙基已基)磷酸为载体和表面活性剂失水山梨醇单油酸酯、磺化煤油组成液膜体系。研究了影响乳化液膜提取的各种因素,确定了适宜的分离条件。丙氨酸的单级提取率超过60％,浓缩3倍以上。对该液膜体系在交流高压静电场作用下,箱式破乳器的破乳过程,建立了破乳速率和相关操作因素间的定量关系。     

Enantioselective separation of enantiomeric amides on three amylose-based chiral stationary phases: Effects of backbone and carbamate side chain chiralities

A series of enantiomeric amides have been chromatographed on three amylose-based chiral stationary phases (CSPs): amylose tris(3,5-dimethylphenylcarbamate) (AD-CSP), amylose tris (S-phenylethylcarbamate) (AS-CSP), and amylose tris(R-phenylethyl-carbamate) (AR-CSP). The relative retentions and enantioselectives of the solutes on the three CSPs were compared and basic structure-retention relationships developed to describe the chromatographic results. The data indicate that for these solutes the observed elution order was a function of the chirality of the amylose backbone, while the magnitude of the enantioselective separations was affected by the chirality of the carbamate side chain. Chirality 9:173–177, 1997. © 1997 Wiley-Liss, Inc.     

Viewing and Inducing Symmetry Breaking at the Single‐Molecule Limit

Symmetry breaking by photons, electrons, and molecular interactions lies at the heart of many important problems as varied as the origin of homochiral life to enantioselective drug production. Herein we report a system in which symmetry breaking can be induced and measured in situ at the single‐molecule level using scanning tunneling microscopy. We demonstrate that electrical excitation of a prochiral molecule on an achiral surface produces large enantiomeric excesses in the chiral adsorbed state of up to 39%. The degree of symmetry breaking was monitored as a function of scanning probe tip state, and the results revealed that enantiomeric excesses are correlated with the intrinsic chirality in scanning probe tips themselves, as evidenced by height differences between single molecule enantiomers. While this work has consequences for the study of two‐dimensional chirality, more importantly, it offers a new method for interrogating the coupling of photons, electrons, and combinations of physical fields to achiral starting systems in a reproducible manner. This will allow the mechanism of chirality transfer to be studied in a system in which enantiomeric excesses are quantified accurately by counting individual molecules. Chirality 24:1051–1054, 2012. © 2012 Wiley Periodicals, Inc.     

Single enantiomeric β-blockers—The existing technologies

A number of β-blocking drugs are available in the world market, only few compounds are found as single enantiomers. The need to use the single enantiomeric β-blockers affects development of drugs and technology. Many processes have been exploited to replace the existing racemates. Two main routes are established: (1) asymmetric syntheses and (2) racemic resolutions. The syntheses give medium-high yields and excellent enantiomeric excess, but the resolutions are limited by 50% yield. Both technologies involve new techniques such as dynamic kinetic resolution (DKR) and membrane-based extraction. The synthetic ways utilise various substrates and catalysts. A simultaneous formation is also afforded by these processes. They offer oriented alternatives to the single enantiomeric β-blockers. Resolutions of the racemates appear with many attractive separation methods. Direct or indirect resolutions show excellent characteristics and produce high enantiomeric excess. The existing processes operate continuously at mild operating temperatures compared to the asymmetric synthesis. In situ separation is also exploited. Development of the single enantiomeric β-blockers using the DKR based on enzymatic membrane(s) is encouraged. Integration of acetylation, racemisation and hydrolysis followed by separation of the enantiomers in the enzymatic membrane reactors could be a better option in resolution and separation of the β-blocker racemates.     

Synthesis and enantiomeric purity determination of chiral 3-benzylglycidol,a key synthon for hiv protease inhibitors

The detailed synthesis of (2R,3R)-3-benzylglycidol by the Sharpless asymmetric epoxidation route is described. The enantiomeric purity determination of this compound is complicated by the presence of small quantities of the diastereometric (2R,3S)-3-benzylglycidol from the asymmetric epoxidation of the cis-allylic alcohol, and the unreacted allylic alcohols that are not removed in the product isolation steps. We have developed a direct chiral HPLC method that can resolve all these components for the precise determination of enantiomeric excesses of chiral 3-benzylglycidols. © 1994 Wiley-Liss, Inc.     

HPLC enantioseparation on cellulose tris(3,5-dimethylphenylcarbamate) as a chiral stationary phase: Influences of pore size of silica gel,coating amount,coating solvent,and column temperature on chiral discrimination

Cellulose tris(3,5-dimethylphenylcarbamate) (CDMPC) was coated on large-pore silica gels and used as a chiral stationary phase (CSP) for high-performance liquid chromatographic separation of enantiomers. The influences of pore size of silica gel, coating amount of CDMPC, coating solvent, and column temperature on chiral discrimination were investigated. CSPs prepared with a large-pore silica gel having a small surface area showed higher chiral recognition. The amount of CDMPC adsorbed on the silica gel influenced the chiral recognition of some racemates. Loading capacity of racemates increased with an increase of the amount of CDMPC supported on the silica gel, and a CSP coated with 45% CDMPC by weight can be used for both analytical and semi-preparative scale separations. The CDMPC, coated using acetone as the coating solvent, exhibited, in many cases, higher enantioselectivity than that obtained with tetrahydrofuran F as the coating solvent. © 1996 Wiley-Liss, Inc.     

Enantioseparation of amfepramone (rac-diethylpropion): preparative separation of the enantiomers and enantioselective analysis

The enantiomers of the anorectic drug amfepramone [rac-diethylpropion, rac-2-(diethylamino)-1-phenyl-1-propanone; rac-DEP] were separated in the preparative scale by crystallization. With enantiopure di-O-benzoyltartaric acid as salt-forming chiral selector, diastereoisomeric salts of DEP enantiomers with a final purity of more than 97.5% were obtained. Analytical liquid chromatographic and electrophoretic methods for the control of the enantiomeric purity and the stoichiometry of the salts were developed. The enantioseparation of rac-DEP by capillary electrophoresis (CE) using hydroxypropyl-beta-cyclodextrin (HP-beta-CD) as chiral discriminator and phosphate buffer (pH 3.3) as run buffer led to good separations. HPLC methods were developed using polysaccharide chiral stationary phases (CSP). The separation of the two enantiomers and the two main degradation products (1-phenyl-1,2-propanedione and propiophenone), known from solid and liquid pharmaceutical preparations, was attained in one run on the silica-based CSP cellulose tris(3,5-dimethylphenylcarbamate) (Chiralcel OD). The conditions which might affect the enantioselectivity and the quality of the enantiomeric separation were investigated for Chiralcel OD and the related CSP amylose tris(3,5-dimethylphenylcarbamate) (Chiralpak AD). Both CSPs showed very similar chromatographic properties. The separation factors could be influenced significantly by varying the polar organic modifier added to the mobile phase.     

Enantioseparation of racemic mixtures based on solvent sublation

A method of solvent sublation was developed for the enantioseparation of racemic ofloxacin (rac Oflx) and racemic tryptophan (rac Trp). In this method, dibenzoyl-L-tartaric acid (L-DBTA) and di-(2-ethylhexyl) phosphoric acid (D2EHPA) and sodium lauryl sulfate (SDS) were used as chiral coextractants and foamer, respectively. Several important parameters influencing the separation performances, such as pH in aqueous phase, concentrations of rac mixtures, L-DBTA, D2EHPA, and SDS, were investigated. Under the optimal operation conditions, the enantiomeric excess and enantioselectivity were 60.08% and 5.58 for Oflx and 65.09% and 6.31 for Trp, respectively. The yields of D-enantiomer and L-enantiomer were 34.23% and 8.54% for Oflx and 18.59% and 3.93% for Trp, respectively. The results suggest that the enantioselectivities have been enhanced compared with the traditional chiral extraction. This technique is an efficient chiral separation method, with many advantages such as low expenditures of organic solvent, low consumption of chiral extractant, and easy realization of multistage operation.     

NHC-containing chiral bidentate ligands: synthesis and evaluation in enantioselective copper-catalyzed conjugate addition

New chiral phosphine-, thiolate-, mesylate-, and tosylate-containing N-heterocyclic carbene ligands have been synthesized in fair to excellent yield. These bidentate ligands have been evaluated in enantioselective copper-catalyzed conjugate addition to both cyclic and acyclic enones and displayed good catalytic activities and poor to good enantiomeric excesses (up to 80%).