HPLC-based bioseparations using molecularly imprinted polymers

HPLC-based separations of amino acids and peptides, nucleotide bases, drugs, sugars and steroids using molecularly imprinted polymers (MIPs) have been reviewed in this article. The molecular recognition mechanisms of the template molecules on the MIPs in organic and aqueous eluents were discussed. Furthermore, new polymerization methods suitable for preparations of HPLC columns and packing materials using molecular imprinting techniques, and their applications to HPLC-based separations are also dealt with.     

Binding cross-reactivity of Boc-phenylalanine enantiomers on molecularly imprinted polymers

A potential problem associated with molecularly imprinted polymer (MIP) sorbents is that of cross-reactivity. In this study three MIPs (imprinted with Boc-L-phenylalanine, Boc-L-alanine, Boc-L-glutamic acid) plus a non-imprinted control were prepared and examined for their ability to bind differentially the enantiomers of boc-protected phenylalanine in an effort to quantify cross-reactivity and to develop a predictive model. Batch rebinding studies showed a degree of predictability for a number of MIP-ligand pairs, but other combinations showed unexpectedly high levels of cross-reactivity. Despite the general acceptance of heterogeneity of MIP binding sites, many previous studies report linear Scatchard plots, which is indicative of binding site homogeneity. The data from this study produced curves, clearly demonstrating heterogeneity. The theoretical and practical implications of this heterogeneity are discussed. Chirality 9:233–237, 1997. © 1997 Wiley-Liss, Inc.     

Synthesis of molecularly imprinted polymers using a functionalized initiator for chiral-selective recognition of propranolol

We present a new concept of synthesis for preparation of molecularly imprinted polymers using a functionalized initiator to replace the traditional functional monomer. Using propranolol as a model template, a carboxyl-functionalized radical initiator was demonstrated to lead to high-selectivity polymer particles prepared in a standard precipitation polymerization system. When a single enantiomer of propranolol was used as template, the imprinted polymer particles exhibited clear chiral selectivity in an equilibrium binding experiment. Unlike the previous molecular imprinting systems where the active free radicals can be distant from the template-functional monomer complex, the method reported in this work makes sure that the actual radical polymerization takes place in the vicinity of the template-associated functional groups. The success of using functional initiator to synthesize molecularly imprinted polymers brings in new possibilities to improve the functional performance of molecularly imprinted synthetic receptors.     

Effect of constituting amino acid residue numbers on molecularly imprinted chiral recognition sites

In the present study, the effect of constituting amino acid residue numbers of oligopeptide derivatives, which are candidate materials to construct molecular recognition sites, on chiral recognition ability was investigated. Chiral recognition sites were formed from oligopeptide derivatives, of which constituting amino acid residue numbers were three to six, by adopting an alternative molecular imprinting. It was made clear that the number four, in other words, the tetrapeptide derivative, is the best candidate material to form a chiral recognition site.     

Fluorescent competitive flow-through assay for chloramphenicol using molecularly imprinted polymers

It is a fact that molecular imprinting techniques have reached tremendous importance in the research of new artificial recognition systems. These methods resemble the mechanism of natural recognition, generally based on non-covalent interactions, but improving their stability by means of a simple and inexpensive technique. Molecular imprinting polymers (MIPs) are easily obtained by copolymerisation of suitable functional monomers and crosslinkers in the presence of the print molecule. Removal of the template leaves a polymer that selectively recognises it. In this work, different imprinted polymers for chloramphenicol (CAP) obtained using different monomers and polymerisation conditions were tested in a HPLC system, in order to obtain a highly selective material for CAP. The optimised MIP was then used as recognition phase in a fluorescent competitive flow assay to determine chloramphenicol.     

A brief review of coarse-grained and other computational studies of molecularly imprinted polymers

Molecular imprinting is an established method for the creation of artificial recognition sites in synthetic materials through polymerization and cross-linking in the presence of template molecules. Removal of the templates leaves cavities that are complementary to the template molecules in size, shape, and functionality. In recent years, various theoretical and computational models have been developed as tools to aid in the design of molecularly imprinted polymers (MIPs) or to provide insight into the features that determine MIP performance. These studies can be grouped into two general approaches-screening for possible functional monomers for particular templates and macromolecular models focusing on the structural characterization of the imprinted material. In this review, we pay special attention to coarse-grained models that characterize the functional heterogeneity in imprinted pores, but also cover recent advances in atomistic and first principle studies. We offer a critical assessment of the potential impact of the various models towards improving the state-of-the-art of molecular imprinting.     

Chiral determination of cinchonine using an electrochemiluminescent sensor with molecularly imprinted membrane on the surfaces of magnetic particles

A novel molecular imprinting electrochemiluminescence sensor for detecting chiral cinchonine molecules was developed with a molecularly imprinted polymer membrane on the surfaces of magnetic microspheres. Fe₃O₄@Au nanoparticles modified with 6‐mercapto‐beta‐cyclodextrin were used as a carrier, cinchonine as a template molecule, methacrylic acid as a functional monomer and N ,N ′‐methylenebisacrylamide as a cross‐linking agent. Cinchonine was specifically recognized by the 6‐mercapto‐beta‐cyclodextrin functional molecularly imprinted polymer and detected based on enhancement of the electrochemiluminescence intensity caused by the reaction of tertiary amino structures of cinchonine molecules with Ru(bpy)₃²⁺. Cinchonine concentrations of 1 × 10^?10 to 4 × 10^?7 mol/L showed a good linear relationship with changes of the electrochemiluminescence intensity, and the detection limit of the sensor was 3.13 × 10^?11 mol/L. The sensor has high sensitivity and selectivity, and is easy to renew. It was designed for detecting serum samples, with recovery rates of 98.2% to 107.6%.     

Investigation of polyacrylamide hydrogel-based molecularly imprinted polymers using protein gel electrophoresis

In conjunction with polyacrylamide gel electrophoresis (PAGE), molecular imprinting methods have been applied to produce a multilayer mini-slab in order to evaluate how selectively and specifically a hydrogel-based molecularly imprinted polymer (MIP) binds bovine haemoglobin (BHb, ~64.5 kDa). A three-layer mini-slab comprising an upper and lower layer and a MIP, or a non-imprinted control polymer dispersion middle layer has been investigated. The discriminating MIP layer, also based on polyacrylamide, was able to specifically bind BHb molecules in preference to a protein similar in molecular weight such as bovine serum albumin (BSA, ~66 kDa). Protein staining allowed us to visualise the protein retention strength of the MIP layer under the influence of an electric field. This method could be applied to other proteins with implications in effective protein capture, disease diagnostics, and protein analysis.     

Molecularly imprinted polymeric membranes

Molecularly imprinted polymeric membranes have been emerged since 1990. Among various kinds of molecular imprinting studies, the application of molecular imprinting to membrane separation is still a novel investigation. In the present review paper, molecularly imprinted polymeric membranes are summarized and examined. The application of molecular imprinting to membrane separation shortly leads to high performance separation membranes.     

New biomedical devices with selective peptide recognition properties. Part 1: Characterization and cytotoxicity of molecularly imprinted polymers

Molecular imprinting is a technique for the synthesis of polymers capable to bind target molecules selectively. The imprinting of large proteins, such as cell adhesion proteins or cell receptors, opens the way to important and innovative biomedical applications. However, such molecules can incur into important conformational changes during the preparation of the imprinted polymer impairing the specificity of the recognition cavities. The "epitope approach" can overcome this limit by adopting, as template, a short peptide sequence representative of an accessible fragment of a larger protein. The resulting imprinted polymer can recognize both the template and the whole molecule thanks to the specific cavities for the epitope. In this work two molecularly imprinted polymer formulations (a macroporous monolith and nanospheres) were obtained using the protected peptide Z-Thr-Ala-Ala-OMe, as template, and Z-Thr-Ile-Leu-OMe, as analogue for the selectivity evaluation, methacrylic acid, as functional monomer, and trimethylolpropane trimethacrylate and pentaerythritol triacrylate (PETRA), as cross-linkers. Polymers were synthesized by precipitation polymerization and characterized by standard techniques. Polymerization and rebinding solutions were analyzed by high performance liquid chromatography. The highly cross-linked polymers retained about 70% of the total template amount, against (20% for the less cross-linked ones). The extracted template amount and the rebinding capacity decreased with the cross-linking degree, while the selectivity showed the opposite behaviour. The PETRA cross-linked polymers showed the best recognition (MIP 2-, alpha=1.71) and selectivity (MIP 2+, alpha'=5.58) capabilities. The cytotoxicity tests showed normal adhesion and proliferation of fibroblasts cultured in the medium that was put in contact with the imprinted polymers.     

超声波辅助抽提法在孔雀石绿分子印迹固相萃取中的应用

采用沉淀聚合法制备孔雀石绿分子印迹聚合物(MG-MIPs),以洗脱效率及吸附量为指标,考察超声波辅助抽提法对MIPs中MG洗脱效果及吸附性能的影响,通过扫描电镜观察MIPs的表面形态,并对其吸附性能进行研究。结果表明:模板分子MG在超声30 min、超声10次、料液比m(MG-MIPs)∶V(甲醇-乙酸溶液)为1∶10(g/m L)、温度为25℃、超声功率为270 W的条件下,洗脱效果最好,MIPs在固相萃取柱中的吸附效率较高,达到198μg/g。     

Spectrofluorimetric determination of atenolol from human urine using high‐affinity molecularly imprinted solid‐phase extraction sorbent

This study presents a novel, sensitive and selective molecularly imprinted solid‐phase extraction (MISPE)–spectrofluorimetric method for the removal and determination of atenolol from human urine. Molecularly imprinted and non‐imprinted polymers were synthesized thermally using a radical chain polymerization technique and used as solid‐phase extraction sorbents. Acrylic acid ethylene glycol dimethacrylate, dibenzoyl peroxide and dichloroethane were used as a functional monomer, cross‐linker, initiator and porogen, respectively. The calibration curve was in the range of 0.10–2.0 μg/ml for the developed method. Limit of detection and limit of quantification values were 0.032 and 0.099 μg/ml, respectively. Owing to the selectivity of the MISPE technique and the sensitivity of spectrofluorimetry, trace levels of atenolol have been successfully determined from both organic and aqueous media. Relatively high imprinting factor (4.18) and recovery results (74.5–75.3%) were obtained. In addition, intra‐ and interday precision values were 0.38–1.03% and 0.47–2.05%, respectively, proving the precision of the proposed method. Thus, a selective, sensitive and simple MISPE–spectrofluorimetric method has been developed and applied to the direct determination of atenolol from human urine.     

Relationship between enantioselectivity of alternative molecularly imprinted polymeric membranes and species of amino acid residues composing chiral recognition sites

Molecularly imprinted polymeric membranes with tetrapeptide residue H-Asp(OcHex)-Asp(OcHex)-Asp(OcHex)-Asp(OcHex)-CH₂- (DDDD) or H-Glu(OBzl)-Glu(OBzl)-Glu(OBzl)-Glu(OBzl)-C H₂- (EEEE) were prepared during membrane preparation (casting) processing in the presence of print molecules. The Boc-L-Trp imprinted polymeric membranes thus obtained showed adsorption selectivity toward Ac-L-Trp from its racemic mixtures. From adsorption isotherms of Ac-Trp, the chiral recognition site, that had been formed by the presence of print molecules in the membrane preparation process, exclusively recognized Ac-L-Trp that possessed the same configuration of the print molecule. The affinity constants between chiral recognition sites in the membrane and Ac-L-Trp was determined to be 1.00 × 10⁴ mol^–1 dm³ and 1.08 × 10⁴ mol^–1 dm³ for the DDDD and EEEE membranes, respectively. Enantioselective electrodialysis could be attained by applying an optimum potential difference to give permselectivity, with a value close to its adsorption selectivity.     

On the structure of molecularly imprinted polymers by modifying charge on functional groups through molecular dynamics simulations

Molecularly imprinted polymers (MIPs) have been widely applied in many fields owing to their advantages. The recognition mechanism between target molecules and MIPs and the influence of dominant factor on the recognition process are still poorly understood. In this paper, a cubic methacrylate-based MIP model was constructed, and the charge on carboxyl group atoms was changed artificially to investigate the recognition process. It is found that the diffusion coefficients of the target molecules (cholesterol) are not affected by polymer network structure. The recognition process is mainly determined by the mesh sizes of the polymer network. In addition, the structure of modified MIP systems was also discussed from the viewpoints of radial distribution function and hydrogen bonds system. These results suggest that the polymer matrix structure would be enhanced with an increase in charge. Thus, it influences the structure of the water molecules in the system a little.     

Highly selective recognition of L‐phenylalanine with molecularly imprinted polymers based on imidazolyl amino acid chiral ionic liquid

Several amino acid chiral ionic liquids were introduced as functional monomers to prepare molecularly imprinted polymers for specific recognition of L‐phenylalanine. Among them, the imprinted polymers L‐Phe@MIPs based on [ViImC3][L‐Pro] showed the best selective recognition ability for L‐phenylalanine. A series of experiments such as dynamic adsorption, static adsorption, and competitive adsorption were conducted to investigate the specific recognition ability and adsorption capacity of the L‐Phe@MIPs. It is found that the adsorption efficiency to L‐phenylalanine on L‐Phe@MIPs was 3.11 times higher than that to D‐phenylalanine. All the results demonstrated that the L‐Phe@MIPs possessed good recognition and relatively high adsorption efficiency for L‐phenylalanine. Besides, the recovery of L‐phenylalanine was above 98%, and the L‐Phe@MIPs exhibited good reusability.     

‘Bite-and-Switch’ approach using computationally designed molecularly imprinted polymers for sensing of creatinine

A method for the selective detection of creatinine is reported, which is based on the reaction between polymerised hemithioacetal, formed by allyl mercaptan, o-phthalic aldehyde, and primary amine leading to the formation of fluorescent isoindole complex. This method has been demonstrated previously for the detection of creatine using creatine-imprinted molecularly imprinted polymers (MIPs) Since MIPs created using traditional methods were unable to differentiate between creatine and creatinine, a new approach to the rational design of a molecularly imprinted polymer (MIP) selective for creatinine was developed using computer simulation. A virtual library of functional monomers was assigned and screened against the target molecule, creatinine, using molecular modelling software. The monomers giving the highest binding score were further tested using simulated annealing in order to mimic the complexation of the functional monomers with template in the monomer mixture. The result of this simulation gave an optimised MIP composition. The computationally designed polymer demonstrated superior selectivity in comparison to the polymer prepared using traditional approach, a detection limit of 25 μM and good stability. The ‘Bite-and-Switch’ approach combined with molecular imprinting can be used for the design of assays and sensors, selective for amino containing substances.     

Liquid chromatographic enantiomer resolution of N-hydrazide derivatives of 2-aryloxypropionic acids on a crown ether derived chiral stationary phase

The liquid chromatographic separation of the enantiomers of several N-hydrazide derivatives of 2-aryloxypropionic acids was performed on a crown ether type chiral stationary phase derived from (18-crown-6)-2,3,11,12-tetracarboxylic acid. The behavior of chromatographic parameters by the change of mobile phases and additives for the resolution of these analytes was investigated. The enantiomers of all analytes were base-line resolved with a mobile phase of 100% methanol containing 20 mM H2SO4. These results are the first reported for enantiomer resolution of chiral acids of 2-aryloxypropionic acids as their N-hydrazide derivatives.     

Adsorption of Ni2+ on the surface of molecularly imprinted adsorbent from Penicillium chysogenum mycelium

The adsorption capacity for Ni²⁺ on to the surface molecular imprinting adsorbent on Penicillium chysogenum mycelium (the surface-imprinted adsorbent) was 40–45 mg g^–1 (using 200 mg Ni²⁺ l^–1), two times of the mycelium adsorbent. The surface-imprinted adsorbent had good stability at pH 28. The optimal concentration of EDTA for desorption was 0.1 to 0.5 g l^–1. The surface imprinted adsorbent could be reused 15 times without losing its uptake.     

Determination of digoxin in serum samples using a flow-through fluorosensor based on a molecularly imprinted polymer

This work describes the development of a competitive flow-through FIA assay for digoxin using a molecularly imprinted polymer (MIP) as the recognition phase. In previous work, a number of non-covalent imprinted polymers were synthesised by “bulk” polymerisation. The digoxin binding and elution characteristics of these MIPs were then evaluated to obtain a highly selective material for integration into a sensor. The optimum MIP was synthesised by photo-initiated polymerisation of a mixture containing digoxin, MAA, EDGMA and AIBN in acetonitrile. The bulk polymer was ground and sieved and the template removed by Soxhlet extraction in MeOH/ACN. The MIP was packed into a flow cell and placed in a spectrofluorimeter to integrate the reaction and detection systems. The physical and chemical variables involved in digoxin determination by the sensor (nature and concentration of solution, flow rates, etc.) were optimised. Binding with the non-imprinted polymer (NIP) was also analysed. The new fluorosensor showed high selectivity and sensitivity, a detection limit of 1.7 × 10⁻² μg l⁻¹, and high reproducibility (R.S.D. of 1.03% and 1.77% for concentrations of 1.0 × 10⁻³ and 4.0 × 10⁻³ mg l⁻¹, respectively). Selectivity was tested by determining the cross-reactivity of several compounds with structures analogous to digoxin. Under the assay conditions used, in which the potential interfering compounds were in concentrations 100 times higher than that of the analyte, no interference was recorded. The proposed fluorosensor was successfully used to determine digoxin concentration of human serum samples.     

Direct chromatographic resolution of racemic cyclohexylaminoglutethimide and its acetylated metabolite using cellulose-based chiral stationary phase

Racemic cyclohexylaminoglutethimide (±ChAG) and its acetylated metabolite (±ChAG) were resolved by a direct chromatographic method using a Chiracel OD column without derivatization. Maximum resolutions (R) of 4.89 and 0.74 were obtained for the enantiomers of cyclohexylaminoglutethimide and its acetylated metabolite, respectively.