Poly(glycoamidoamine)s: a broad class of carbohydrate-containing polycations for nucleic acid delivery

In the era of nucleic acid therapeutics, there is an urgent need for non-viral delivery vehicles that can cross the extracellular and intracellular barriers and deliver nucleic acids to specific intracellular regions. This paper reviews the development of a subclass of polymer-based delivery vehicles termed poly(glycoamidoamine)s (PGAAs). The general design of this family consists of carbohydrate residues copolymerized with oligoethyleneamine units, which have proven to be an effective motif that promotes polyplex formation, efficient cellular internalization, high gene expression and low cytotoxicity with cultured cell lines and primary cell types. We then discuss the structure-property relationships of the PGAA class of delivery vehicles and studies aimed at understanding the mechanisms involved in cellular internalization and trafficking.     

Photoresponsive polypeptides: Photochromism and conformation of poly (L-glutamic acid) containing spiropyran units

Spirobenzopyran units were bound to the side chains of poly (L -glutamic acid) and partially methylated poly(L -glutamate)s. The modified polymers were found to exhibit “reverse photochromism” in hexafluoro-2-propanol (HFP), so the samples kept in the dark were characterized by an intense absorption band in the visible range of the spectrum, which was completely erased upon exposure to sunlight or irradiation at 500–550 nm. The CD spectra showed that the macromolecules adopted a random coil conformation in the dark, whereas the bleached solutions after exposure to light displayed the typical CD pattern of the α-helix. The back reaction in the dark was accompanied by the progressive decrease of the helix content and recovery of the original disordered conformation. The photoinduced conformational changes resulted in large and reversible viscosity variations. When spiropyran side chains were converted to “spiropyran salts” of trifluoroacetic acid, the system was still photochromic, but the macromolecules were disordered both in the dark and light conditions. However, when appropriate amounts of methanol were added as a cosolvent to the HFP solutions, the system responded to light, giving reversible variations of the α-helix content. Irradiation at appropriate solvent compositions allowed modulation of the extent of the photoresponse. © 1993 John Wiley & Sons, Inc.     

Bacterial polyesters containing branched poly(beta-hydroxyalkanoate) units

Pseudomonas oleovorans was grown on mixtures of methyloctanoates with n-octanoate. Polymers were also obtained from organisms grown on pure 7-methyloctanoate, but not from pure 5- or 6-methyloctanoate. The polyesters obtained from 7-methyloctanoate and from its mixtures with n-octanoate contained units with the methyl branches in the pendant group, as did the copolymers from the mixtures of 5- and 6-methyloctanoate with n-octanoate. The methyl branched repeating units contained two diastereomers, and the 13C-n.m.r. spectra of these polymers indicated that the 5-methyloctanoate units had a higher content of one of the two isomers, but not in the 6-methyloctanoate units. The weight average molecular weights of the copolyesters produced were in the range of 220,000 to 410,000, with Mw/Mn ratios of 1.7 to 1.9.     

In situ copolyesters containing poly(L-lactide) and poly(hydroxyalkanoate) units

In situ copolyesters containing polylactide (PLA) and polyhydroxyalkanoate (PHA) segments were obtained via ring-opening polymerization of L-lactide using PHA as a macroinitiator with stannous octoate as catalyst. Incorporation of PHA (20 wt %) into PLA affords a novel copolymer with Mn values ranging from 25 to 50 KDa and low polydispersities of 1.8-2.3. DSC analysis of the copolymer indicates well-defined crystallization and melting transitions different from the homopolymers and corresponding blend. The polymers were characterized by FT-IR, GPC, DSC, optical microscopy, NMR, and TGA. The results show successful reactivity of PHA as a macroinitiator for the ring-opening polymerization of lactide.     

Ketal cross-linked poly(ethylene glycol)-poly(amino acid)s copolymer micelles for efficient intracellular delivery of doxorubicin

A biocompatible, robust polymer micelle bearing pH-hydrolyzable shell cross-links was developed for efficient intracellular delivery of doxorubicin (DOX). The rationally designed triblock copolymer of poly(ethylene glycol)-poly(L-aspartic acid)-poly(L-phenylalanine) (PEG-PAsp-PPhe) self-assembled to form polymer micelles with three distinct domains of the PEG outer corona, the PAsp middle shell, and the PPhe inner core. Shell cross-linking was performed by the reaction of ketal-containing cross-linkers with Asp moieties in the middle shells. The shell cross-linking did not change the micelle size and the spherical morphology. Fluorescence quenching experiments confirmed the formation of shell cross-linked diffusion barrier, as judged by the reduced Stern-Volmer quenching constant (K(SV)). Dynamic light scattering and fluorescence spectroscopy experiments showed that shell cross-linking improved the micellar physical stability even in the presence of micelle disrupting surfactants, sodium dodecyl sulfate (SDS). The hydrolysis kinetics study showed that the hydrolysis half-life (t(1/2)) of ketal cross-links was estimated to be 52 h at pH 7.4, whereas 0.7 h at pH 5.0, indicating the 74-fold faster hydrolysis at endosomal pH. Ketal cross-linked micelles showed the rapid DOX release at endosomal pH, compared to physiological pH. Confocal laser scanning microscopy (CLSM) showed that ketal cross-linked micelles were taken up by the MCF-7 breast cancer cells via endocytosis and transferred into endosomes to hydrolyze the cross-links by lowered pH and finally facilitate the DOX release to inhibit proliferation of cancer cells. This ketal cross-linked polymer micelle is promising for enhanced intracellular delivery efficiency of many hydrophobic anticancer drugs.     

Gene delivery properties of end-modified poly(beta-amino ester)s

Here, we present the synthesis of a library of end-modified poly(beta-amino ester)s and assess their utility as gene delivery vehicles. Polymers were synthesized using a rapid, two-step approach that involves initial preparation of an acrylate-terminated polymer followed by a postpolymerization amine-capping step to generate end-functionalized polymers. Using a highly efficient poly(beta-amino ester), C32, we show that the terminal amine can greatly affect and improve polymer properties relevant to gene delivery. Specifically, the in vitro transfection levels can be increased by 30% and the optimal polymer:DNA ratio lowered 5-fold by conjugation of the appropriate end group. The most effective modifications were made by grafting primary diamine molecules to the chain termini. The added charge and hydrophobicity of some derivatives enhanced DNA binding and resulted in the formation of polymer-DNA complexes less than 100 nm in diameter. In addition, cellular uptake was improved 5-fold over unmodified C32. The end-modified poly(beta-amino ester)s presented here are some of the most effective gene-delivery polycations, superior to polyethylenimine and previously reported poly(beta-amino ester)s. These results show that the end-modification of poly(beta-amino ester)s is a general strategy to alter functionality and improve the delivery performance of these materials.     

Microbial degradation of poly(amino acid)s

Natural poly(amino acid)s are a group of poly(ionic) molecules (ionomers) with various biological functions and putative technical applications and play, therefore, an important role both in nature and in human life. Because of their biocompatibility and their synthesis from renewable resources, poly(amino acid)s may be employed for many different purposes covering a broad spectrum of medical, pharmaceutical, and personal care applications as well as the domains of agriculture and of environmental applications. Biodegradability is one important advantage of naturally occurring poly(amino acid)s over many synthetic polymers. The intention of this review is to give an overview about the enzyme systems catalyzing the initial steps in poly(amino acid) degradation. The focus is on the naturally occurring poly(amino acid)s cyanophycin, poly(epsilon-L-lysine) and poly(gamma-glutamic acid); but biodegradation of structurally related synthetic polyamides such as poly(aspartic acid) and nylons, which are known from various technical applications, is also included.     

Novel bioreducible poly(amido amine)s for highly efficient gene delivery

A series of novel bioreducible poly(amido amine)s containing multiple disulfide linkages (SS-PAAs) were synthesized and evaluated as nonviral gene vectors. These linear SS-PAAs could be easily obtained by Michael-type polyaddition of various primary amines to the disulfide-containing cystamine bisacrylamide. The SS-PAA polymers are relatively stable in medium mimicking physiological conditions (pH 7.4, 150 mM PBS, 37 degrees C), but are rapidly degraded in the presence of 2.5 mM DTT, mimicking the intracellular reductive environment (pH 7.4, [R-SH] = 5 mM, 37 degrees C). The polymers efficiently condense DNA into nanoscaled (<200 nm) and positively charged (>+20 mV) polyplexes that are stable under neutral conditions but are rapidly destabilized in a reductive environment, as was revealed by both dynamic light scatting measurement and agarose gel assays. Moreover, most of the poly(amido amine)s possess buffer capacities in the pH range pH 7.4-5.1 that are even higher than polyethylenimine (pEI), a property that may favorably contribute to the endosomal escape of the polyplexes. Polyplexes of four of the seven SS-PAAs studied were able to transfect COS-7 cells in vitro with transfection efficiencies significantly higher than those of branched pEI, being one of the most effective polymeric gene carriers reported to date. Importantly, also in the presence of serum, a high level of gene expression could be observed when the incubation time was elongated from 1 h to 4 h. XTT assays showed that SS-PAAs and their polyplexes possess essentially no or only very low cytotoxicity at concentrations where the highest transfection activity is observed. The results indicate that bioreducible poly(amido amine)s have excellent properties for the development of highly potent and nontoxic polymeric gene carriers.     

Neuron-specific delivery of nucleic acids mediated by Tet1-modified poly(ethylenimine)

BACKGROUND: The development of minimally invasive, non-viral gene delivery vehicles for the central nervous system (CNS) is an important technology goal in the advancement of molecular therapies for neurological diseases. One approach is to deliver materials peripherally that are recognized and retrogradely transported by motor neurons toward the CNS. Tet1 is a peptide identified by Boulis and coworkers to possess the binding characteristics of tetanus toxin, which interacts specifically with motor neurons and undergoes fast, retrograde delivery to cell soma. In this work, Tet1-poly(ethylenimine) (Tet1-PEI) was synthesized and evaluated as a neurontargeted delivery vehicle. METHODS: Tet1-PEI and NT-PEI (neurotensin-PEI) were synthesized and complexed with plasmid DNA to form polyplexes. Polyplexes were assessed for binding and uptake in differentiated neuron-like PC-12 cells by flow cytometry and confocal microscopy. In order to determine gene delivery efficiency, polyplexes were exposed to PC-12 cells at various stages of differentiation. Targeted binding of polyplexes with primary neurons was studied using dorsal root ganglion cells. RESULTS: Tet1-PEI and NT-PEI polyplexes bound specifically to differentiated PC-12 cells. The specificity of the interaction was confirmed by delivery to non-neuronal cells and by competition studies with free ligands. Tet1-PEI polyplexes preferentially transfected PC-12 cells undergoing NGF-induced differentiation. Finally, neuron-specific binding of Tet1-PEI polyplexes was confirmed in primary neurons. CONCLUSIONS: These studies demonstrate the potential of Tet1-PEI as a neuron-targeted material for non-invasive CNS delivery. Tet1-PEI binds specifically and is internalized by neuron-like PC-12 cells and primary dorsal root ganglion. Future work will include evaluation of siRNA delivery with these vectors.     

Reducible poly(amido ethylenimine)s designed for triggered intracellular gene delivery

Poly(amido ethylenimine) polymers, a new type of peptidomimetic polymer, containing multiple disulfide bonds (SS-PAEIs) designed to degrade after delivery of plasmid DNA (pDNA) into the cell were synthesized and investigated as new carriers for triggered intracellular gene delivery. More specifically, three SS-PAEIs were synthesized from Michael addition reactions between cystamine bisacrylamide (CBA) and three different ethylene amine monomers, i.e., ethylenediamine (EDA), diethylenetriamine (DETA), or triethylenetetramine (TETA). Complete addition reactions were confirmed by (1)H NMR. The molecular weight, buffer capacity, and relative degree of branching for each SS-PAEI was determined by gel permeation chromatography (GPC), acid-base titration, and liquid chromatography-mass spectroscopy (LC-MS), respectively. Physicochemical characteristics of polymer/pDNA complexes (polyplexes) were analyzed by gel electrophoresis, particle size, and zeta-potential measurements. All three SS-PAEIs effectively complex pDNA to form nanoparticles with diameters less than 200 nm and positive surface charges of approximately 32 mV. The in vitro gene transfer properties of SS-PAEIs were evaluated using mouse embryonic fibroblast cell (NIH3T3), primary bovine aortic endothelial cell (BAEC), and rat aortic smooth muscle cell (A7R5) lines. Interestingly, polyplexes based on all three SS-PAEIs exhibited remarkably high levels of reporter gene expression with nearly 20x higher transfection efficiency than polyethylenimine 25k. The high transfection efficiency was maintained in the presence of 10% serum in the transfection medium. Furthermore, confocal microscopy experiments using labeled pDNA indicated that polyplexes of SS-PAEI displayed greater intracellular distribution of pDNA as compared to PEI, most likely due to environmentally triggered release. Therefore, SS-PAEIs are a new class of transfection agents that facilitate high gene expression while maintaining a low level of toxicity.     

Synthesis of poly(beta-amino ester)s optimized for highly effective gene delivery

Several families of synthetic polymers, including degradable poly(beta-amino ester)s, have been previously shown to effectively mediate gene transfer. However, the combined impact of potentially significant factors-such as polymer molecular weight, polymer chain end-group, and polymer/DNA ratio-on different gene transfer properties has yet to be systematically investigated. The elucidation of these relationships may aid in the design of nonviral vectors with greatly enhanced transfection properties. To examine these factors, two distinct poly(beta-amino ester) structures, Poly-1 and Poly-2, were generated by adding 1,4-butanediol diacrylate and 1,6-hexanediol diacrylate, respectively, to 1-aminobutanol. Twelve unique versions of each structure were synthesized by varying amine/diacrylate stoichiometric ratios, resulting in polymers with either amine or acrylate end-groups and with molecular weights ranging from 3350 to 18000. Using high throughput methods, all polymers were tested in quadruplicate at nine different polymer/DNA ratios ranging from 10:1 w/w to 150:1 w/w. Through the optimization of molecular weight, polymer chain end-group, and polymer/DNA ratio, these polymers successfully mediated gene transfer at levels that surpassed both PEI and Lipofectamine 2000 in vitro.     

In vitro cytotoxicity of poly(amidoamine)s: relevance to DNA delivery

We have examined the cytotoxicity of a number of poly(amidoamine) polymers which have been proposed for use as DNA delivery systems and compared them to the charged polyamino acid polylysine. Most of the poly(amidoamine)s tested were shown to be remarkably non-toxic to both HepG2 and HL60 cell lines. However, one of the structures (NG30, co-monomers methylene bisacrylamide, dimethylethylene diamine) did show cytotoxicity similar to that of polylysine. A second PAA structure (NG37, NG38, NG39, co-monomers bisacryloyl piperazine, 2-methyl piperazine) showed mild cytotoxicity towards both cell lines, related to the degree of polymerisation. The results support the idea that the cytotoxicity of polycations has a strong structural basis rather than being an effect due only to charge. As a consequence of their general reduced level of cytotoxicity, poly(amidoamine)s appear to have possible advantages for complexation with DNA over some other cationic polymers as a key component of DNA delivery systems.     

Ionic liquids: prospects for nucleic acid handling and delivery

Operations with nucleic acids are among the main means of studying the mechanisms of gene function and developing novel methods of molecular medicine and gene therapy. These endeavours usually imply the necessity of nucleic acid storage and delivery into eukaryotic cells. In spite of diversity of the existing dedicated techniques, all of them have their limitations. Thus, a recent notion of using ionic liquids in manipulations of nucleic acids has been attracting significant attention lately. Due to their unique physicochemical properties, in particular, their micro-structuring impact and tunability, ionic liquids are currently applied as solvents and stabilizing media in chemical synthesis, electrochemistry, biotechnology, and other areas. Here, we review the current knowledge on interactions between nucleic acids and ionic liquids and discuss potential advantages of applying the latter in delivery of the former into eukaryotic cells.     

Laser-assisted nucleic acid delivery: A systematic review

Gene therapy has become an effective treatment modality for some conditions. Laser light may augment or enhance gene therapy through photomechanical, photothermal, and photochemical. This review examined the evidence base for laser therapy to enhance nucleic acid transfection in mammalian cells. An electronic search of MEDLINE, Scopus, EMBASE, Web of Science, and Google Scholar was performed, covering all available years. The preferred reporting items for systematic reviews and meta-analyses guideline for systematic reviews was used for designing the study and analyzing the results. In total, 49 studies of laser irradiation for nucleic acid delivery were included. Key approaches were optoporation, photomechanical gene transfection, and photochemical internalization. Optoporation is better suited to cells in culture, photomechanical and photochemical approaches appear well suited to in vivo use. Additional studies explored the impact of photothermal for enhancing gene transfection. Each approach has merits and limitations. Augmenting nucleic acid delivery using laser irradiation is a promising method for improving gene therapy. Laser protocols can be non-invasive because of the penetration of desirable wavelengths of light, but it depends on various parameters such as power density, treatment duration, irradiation mode, etc. The current protocols show low efficiency, and there is a need for further work to optimize irradiation parameters.     

Evaluation of cell-penetrating peptides (CPPs) as vehicles for intracellular delivery of antisense peptide nucleic acid (PNA)

Cell-penetrating peptides (CPPs) are characterized by their ability to be internalized in mammalian cells. To investigate the relative potency of CPPs as carriers of medicinally relevant cargo, a positive read-out assay based on the ability of a peptide nucleic acid (PNA) oligomer to promote correct expression of a recombinant luciferase gene was employed. Seven different CPPs were included in the study: Transportan, oligo-arginine (R7-9), pTat, Penetratin, KFF, SynB3, and NLS. The CPP-PNA conjugates were synthesized by different conjugation chemistries: continuous synthesis, maleimide coupling, and ester or disulfide linkage. Under serum-free conditions PNA-SS-Transportan-amide (ortho)-PNA was found to be the most potent conjugate, resulting in maximum luciferase signal at a concentration of 1-2 microM. (D-Arg)9-PNA showed optimal efficacy at 5 microM but gave rise to only one-third of the luciferase signal obtained with the Transportan conjugate. The pTat- and KFF-PNA conjugates showed significantly lower efficacy. The penetratin-, SynB3-. and NLS-PNA conjugates showed only minimal or no activity. Serum was found to have a drastic negative impact on CPP-driven cellular uptake. PNA-SS-Transportan-acid (ortho) and (D-Arg)9-PNA were least sensitive to the presence of serum. Both the chemical nature and, in the case of Transportan, the position of the peptide PNA coupling were found to have a major impact on the transport capacity of the peptides. However, no simple relationship between linker type and antisense activity of the conjugates could be deduced from the data.     

Hyperbranched poly(amino ester)s with different terminal amine groups for DNA delivery

Hyperbranched poly(amino ester)s containing tertiary amines in the core and primary, secondary, and tertiary amines in the periphery, respectively, were evaluated for DNA delivery in vitro. The same core structure facilitated the investigation on the effects of the terminal amine type on the properties of hyperbranched poly(amino ester)s for DNA delivery. The hydrolysis of the poly(amino ester)s was monitored using (1)H NMR. The results reflected that the terminal amine type had negligible effects on the hydrolysis rate but was much slower than that of linear poly(amino ester)s, probably due to the compact hyperbranched spatial structure preventing the accessibility of water. In comparison with PEI 25 K, the hyperbranched poly(amino ester)s showed much lower cytotoxicity in Cos7, HEK293, and HepG2 cells. Gel electrophoresis indicated that poly(amino ester)s could condense DNA efficiently, and the zeta potentials and sizes of the complexes formed with different weight ratios of hyperbranched poly(amino ester)s and DNA were measured. Remarkably, all the hyperbranched poly(amino ester)s showed DNA transfection efficiency comparable to PEI 25 K in Cos7, HEK293, and HepG2 cells regardless of the terminal amine type. Therefore, the terminal amine type had insignificant effects on the hydrolysis rate, cytotoxicity, DNA condensation capability, and in vitro DNA transfection efficiency of the hyperbranched poly(amino ester)s.     

Nuclear magnetic resonance spectra of poly(N-alkylamino acid)s

220-MHz NMR spectra of various poly (N-alkylamino acid)s are investigated. Spectra of polysarcosine recorded in various solvents showed fine splittings of the methyl and methylene bands. Comparing the spectrum with that of its model compound, the fine structure of the methyl band of polysarcosine was assigned to four dyad sequences of the cis–trans isomeric state of the main chain amide bonds. Also the methylene band was roughly divided into cis and trans bands. From the temperature dependence of the spectra of polysarcosine, a double coalescence phenomenon was observed, in which the four dyad peaks coalesced into two peaks corresponding to cis and trans, then the two peaks coalesced into one peak. Further, the approximate value of the free energy for the internal rotation of the main chain amide bond was estimated. NMR spectra of various poly(N-alkylglycine)s in methylene chloride solution were also obtained. From the comparsion of their methylene bands, the introduction of the bulky N-alkyl groups was found to increase the cis content of the amide bond.     

Direct isolation of poly(A)+ RNA from 4 M guanidine thiocyanate-lysed cell extracts using locked nucleic acid-oligo(T) capture

LNA oligonucleotides constitute a class of bicyclic RNA analogues having an exceptionally high affinity for their complementary DNA and RNA target molecules. We here report a novel method for highly efficient isolation of intact poly(A)+ RNA using an LNA-substituted oligo(dT) affinity ligand, based on the increased affinity of LNA-T for complementary poly(A) tracts. Poly(A)+ RNA was isolated directly from 4 M guanidine thiocyanate-lysed Caenorhabditis elegans worm extracts as well as from lysed human K562 and vincristine-resistant K562/VCR leukemia cells using LNA_2.T oligonucleotide as an affinity probe, in which every second thymidine was substituted by LNA thymidine. In accordance with the significantly increased stability of the LNA_2.T-A duplexes in 4 M GuSCN, we obtained a 30- to 50-fold mRNA yield increase using the LNA-substituted oligo(T) affinity probe compared with DNA-oligo(dT)-selected mRNA samples. The LNA_2.T affinity probe was, furthermore, highly efficient in isolation of poly(A)+ RNA in a low salt concentration range of 50-100 mM NaCl in poly(A) binding buffer, as validated by selecting the mRNA pools from total RNA samples extracted from different Saccharomyces cerevisiae strains, followed by northern blot analysis. Finally, we demonstrated the utility of the LNA-oligo(T)-selected mRNA in quantitative real-time PCR by analysing the relative expression levels of the human mdr1 multidrug resistance gene in the two K562 cell lines employing pre-validated Taqman assays. Successful use of the NH2-modified LNA_2.T probe in isolation of human mRNA implies that the LNA-oligo(T) method could be automated for streamlined, high throughput expression profiling by real-time PCR by covalently coupling the LNA affinity probe to solid, pre-activated surfaces, such as microtiter plate wells or magnetic particles.     

Cationic lipid-mediated nucleic acid delivery: beyond being cationic

Realization of the potential of nucleic acids as drugs is intricately linked to their in vivo delivery. Cationic lipids demonstrated tremendous potential as safe, efficient and scalable in vitro carriers of nucleic acids. For in vivo delivery of nucleic acids, the extant two component liposomal preparations consisting of cationic lipids and nucleic acids have been largely found to be insufficient. Being a soft matter, liposomes readily respond to many physiological variables leading to complex component and morphological changes, thus confounding the efforts in a priori identification of a “competent” formulation. In the recent past many chemical moieties that provide advantage in facing the challenges of barriers in vivo, were incorporated into cationic lipids to improve the transfection efficiency. The cationic lipids, essential for DNA condensation and protection, definitely require additional components to be efficient in vivo. In addition, formulations of cationic lipid carriers with non-lipidic components, mainly peptides, have demonstrated success in in vivo transfection. The present review describes some recent successes of in vivo nucleic acid delivery by cationic lipids.     

Stereocomplex formation between enantiomeric poly(lactic acid)s. 12. spherulite growth of low-molecular-weight poly(lactic acid)s from the melt

The spherulite growth of stereocomplex crystallites in the blend from low-molecular-weight poly(L-lactide) [i.e., poly(L-lactic acid) (PLLA)] and poly(D-lactide) [i.e., poly(D-lactic acid) (PDLA)] from the melt, together with that of the homocrystallites in pure PLLA and PDLA films, was investigated using polarization optical miscroscopy. The spherulite growth of stereocomplex crystallites occurred at a wider temperature range (相似文献