Influence of putative exopolysaccharide genes on Pseudomonas putida KT2440 biofilm stability

We report a study of the role of putative exopolysaccharide gene clusters in the formation and stability of Pseudomonas putida KT2440 biofilm. Two novel putative exopolysaccharide gene clusters, pea and peb, were identified, and evidence is provided that they encode products that stabilize P. putida KT2440 biofilm. The gene clusters alg and bcs, which code for proteins mediating alginate and cellulose biosynthesis, were found to play minor roles in P. putida KT2440 biofilm formation and stability under the conditions tested. A P. putida KT2440 derivative devoid of any identifiable exopolysaccharide genes was found to form biofilm with a structure similar to wild-type biofilm, but with a stability lower than that of wild-type biofilm. Based on our data, we suggest that the formation of structured P. putida KT2440 biofilm can occur in the absence of exopolysaccharides; however, exopolysaccharides play a role as structural stabilizers.     

Alginate production by Pseudomonas putida creates a hydrated microenvironment and contributes to biofilm architecture and stress tolerance under water-limiting conditions

Biofilms exist in a variety of habitats that are routinely or periodically not saturated with water, and residents must integrate cues on water abundance (matric stress) or osmolarity (solute stress) into lifestyle strategies. Here we examine this hypothesis by assessing the extent to which alginate production by Pseudomonas putida strain mt-2 and by other fluorescent pseudomonads occurs in response to water limitations and how the presence of alginate in turn influences biofilm development and stress tolerance. Total exopolysaccharide (EPS) and alginate production increased with increasing matric, but not solute, stress severity, and alginate was a significant component, but not the major component, of EPS. Alginate influenced biofilm architecture, resulting in biofilms that were taller, covered less surface area, and had a thicker EPS layer at the air interface than those formed by an mt-2 algD mutant under water-limiting conditions, properties that could contribute to less evaporative water loss. We examined this possibility and show that alginate reduces the extent of water loss from biofilm residents by using a biosensor to quantify the water potential of individual cells and by measuring the extent of dehydration-mediated changes in fatty acid composition following a matric or solute stress shock. Alginate deficiency decreased survival of desiccation not only by P. putida but also by Pseudomonas aeruginosa PAO1 and Pseudomonas syringae pv. syringae B728a. Our findings suggest that in response to water-limiting conditions, pseudomonads produce alginate, which influences biofilm development and EPS physiochemical properties. Collectively these responses may facilitate the maintenance of a hydrated microenvironment, protecting residents from desiccation stress and increasing survival.     

Different, overlapping mechanisms for colonization of abiotic and plant surfaces by Pseudomonas putida

Mechanisms governing biofilm formation have generated considerable interest in recent years, yet comparative analyses of processes for bacterial establishment on abiotic and biotic surfaces are still limited. In this report we have expanded previous information on the genetic determinants required for colonization of plant surfaces by Pseudomonas putida populations and analyzed their correlation with biofilm formation processes on abiotic surfaces. Insertional mutations affecting flagellar genes or the synthesis and transport of the large adhesin LapA lead to decreased adhesion to seeds and biofilm formation on abiotic surfaces. The latter also causes reduced fitness in the rhizosphere. Decreased seed adhesion and altered biofilm formation kinetics are observed in mutants affected in heme biosynthesis and a gene that might participate in oxidative stress responses, whereas a mutant in a gene involved in cytochrome oxidase assembly is affected in the bacterium-plant interaction but not in bacterial establishment on abiotic surfaces. Finally, a mutant altered in lipopolysaccharide biosynthesis is impaired in seed and root colonization but seems to initiate attachment to plastic faster than the wild type. This variety of phenotypes reflects the complexity of bacterial adaptation to sessile life, and the partial overlap between mechanisms leading to biofilm formation on abiotic and biotic surfaces.     

BcsQ is an essential component of the Escherichia coli cellulose biosynthesis apparatus that localizes at the bacterial cell pole

Biofilms are microbial communities characterized by three-dimensional growth resulting from the ability of individual cells to adhere to each other as well as to produce an extracellular matrix that ensures biofilm physical cohesion. Numerous bacteria produce cellulose as a biofilm matrix polymer, a property relying on the expression of bacterial cellulose synthesis (Bcs) proteins and their post-translational activation upon binding of cyclic di-guanosine mono-phosphate second messenger (c-di-GMP) produced by diguanylate cyclases. In Escherichia coli and other Enterobacteriaceae, two genes of unknown function, yhjR and yhjQ , are located upstream of the bcs genes. Here, we show that yhjQ , but not yhjR , is essential for cellulose biosynthesis; it has therefore been renamed bcsQ. Using a green fluorescent protein (GFP) fusion approach, we demonstrate that BcsQ, a MinD homologue, displays a polar localization and that cell-to-cell adhesion is initiated through production of cellulose at the BcsQ-labelled pole. Although we did not detect a similar localization for other Bcs proteins, immunogold labelling of cellulose itself at the pole of individual bacteria indicates the localized activity of the cellulose biosynthesis apparatus. These results therefore suggest that BcsQ could participate in spatial restriction of cellulose biosynthesis activity in Enterobacteriaceae.     

Biofilm formation of Pseudomonas putida IsoF: the role of quorum sensing as assessed by proteomics

Pseudomonas putida strains are frequently isolated from the rhizosphere of plants and many strains promote plant-growth, exhibit antagonistic activities against plant pathogens and have the capacity to degrade pollutants. Factors that appear to contribute to the rhizosphere fitness are the ability of the organism to form biofilms and the utilization of cell-to-cell-communication systems (quorum sensing, QS) to co-ordinate the expression of certain phenotypes in a cell density dependent manner. Recently, the ppu QS locus of the tomato rhizosphere isolate P. putida Iso F was characterized and an isogenic QS-negative ppuI mutant P. putida F117 was generated. In the present study we investigated the impact of QS and biofilm formation on the protein profile of surface-associated proteins of P. putida IsoF. This was accomplished by comparative proteome analyses of the P. putida wild type IsoF and the QS-deficient mutant F117 grown either in planktonic cultures or in 60 h old mature biofilms. Differentially expressed proteins were identified by peptide mass fingerprinting and database search in the completed P. putida KT2440 genome sequence. The sessile life style affected 129 out of 496 surface proteins, suggesting that a significant fraction of the bacterial genome is involved in biofilm physiology. In surface-attached cells 53 out of 484 protein spots were controlled by the QS system, emphasizing its importance as global regulator of gene expression in P. putida IsoF. Most interestingly, the impact of QS was dependent on whether cells were grown on a surface or in suspension; about 50% of the QS-controlled proteins identified in planktonic cultures were found to be oppositely regulated when the cells were grown as biofilms. Fifty-seven percent of all identified surface-controlled proteins were also regulated by the ppu QS system. In conclusion, our data provide strong evidence that the set of QS-regulated proteins overlaps substantially with the set of proteins differentially expressed in sessile cells.     

Colonization of peanut roots by biofilm-forming Paenibacillus polymyxa initiates biocontrol against crown rot disease

Aim: To investigate the role of biofilm‐forming Paenibacillus polymyxa strains in controlling crown root rot disease. Methods and Results: Two plant growth‐promoting P. polymyxa strains were isolated from the peanut rhizosphere, from Aspergillus niger‐suppressive soils. The strains were tested, under greenhouse and field conditions for inhibition of the crown root rot pathogen of the peanut, as well as for biofilm formation in the peanut rhizosphere. The strains’ colonization and biofilm formation were further studied on roots of the model plant Arabidopsis thaliana and with solid surface assays. Their crown root rot inhibition performance was studied in field and pot experiments. The strains’ ability to form biofilms in gnotobiotic and soil systems was studied employing scanning electron microscope. Conclusion: Both strains were able to suppress the pathogen but the superior biofilm former offers significantly better protection against crown rot. Significance and Impact of the Study: The study highlights the importance of efficient rhizosphere colonization and biofilm formation in biocontrol.     

Root growth and exudate production define the frequency of horizontal plasmid transfer in the Rhizosphere

To identify the main drivers of plasmid transfer in the rhizosphere, conjugal transfer was studied in the rhizospheres of pea and barley. The donor Pseudomonas putida KT2442, containing plasmid pKJK5::gfp, was coated onto the seeds, while the recipient P. putida LM24, having a chromosomal insertion of dsRed, was inoculated into the growth medium. Mean transconjugant-to-donor ratios in vermiculite were 4.0+/-0.8 x 10(-2) in the pea and 5.9+/-1.4 x 10(-3) in the barley rhizospheres. In soil, transfer ratios were about 10 times lower. As a result of a 2-times higher root exudation rate in pea, donor densities in pea (1 x 10(6)-2 x 10(9) CFU g(-1) root) were about 10 times higher than in barley. No difference in recipient densities was observed. In situ visualization of single cells on the rhizoplane and macroscopic visualization of the colonization pattern showed that donors and transconjugants were ubiquitously distributed in the pea rhizosphere, while they were only located on the upper parts of the barley roots. Because the barley root elongated about 10 times faster than the pea root, donors were probably outgrown by the elongating barley root. Thus by affecting the cell density and distribution, exudation and root growth appear to be key parameters controlling plasmid transfer in the rhizosphere.     

Alginate acetylation influences initial surface colonization by mucoid Pseudomonas aeruginosa

Mucoid strains of Pseudomonas aeruginosa overproduce the exopolysaccharide alginate, which is substituted with O-acetyl groups. Under non-growing conditions in phosphate buffer, a mucoid clinical strain formed microcolonies on steel surfaces, while an acetylation-defective mutant was unable to form cell clusters. Enzymatic degradation of alginate by alginate lyase prevented microcolony formation of the mucoid parent strain. In a continuous-culture flow-cell system, using gluconate minimal medium, the mucoid strain with acetylated alginate formed microcolonies and grew into heterogenous biofilms, whereas the acetylation-defective mutant produced a thinner and more homogeneous biofilm. A lowered viscosity of extracellular material from the acetylation-defective mutant indicated a weakening of exopolymer interactions by loss of acetyl groups. These results suggest that acetyl substituents are necessary for the function of high-molecular-mass alginate to mediate cell aggregation into microcolonies in the early stages of biofilm development by mucoid P. aeruginosa, thereby determining the architecture of the mature biofilm.     

Identification of psl, a locus encoding a potential exopolysaccharide that is essential for Pseudomonas aeruginosa PAO1 biofilm formation

Bacteria inhabiting biofilms usually produce one or more polysaccharides that provide a hydrated scaffolding to stabilize and reinforce the structure of the biofilm, mediate cell-cell and cell-surface interactions, and provide protection from biocides and antimicrobial agents. Historically, alginate has been considered the major exopolysaccharide of the Pseudomonas aeruginosa biofilm matrix, with minimal regard to the different functions polysaccharides execute. Recent chemical and genetic studies have demonstrated that alginate is not involved in the initiation of biofilm formation in P. aeruginosa strains PAO1 and PA14. We hypothesized that there is at least one other polysaccharide gene cluster involved in biofilm development. Two separate clusters of genes with homology to exopolysaccharide biosynthetic functions were identified from the annotated PAO1 genome. Reverse genetics was employed to generate mutations in genes from these clusters. We discovered that one group of genes, designated psl, are important for biofilm initiation. A PAO1 strain with a disruption of the first two genes of the psl cluster (PA2231 and PA2232) was severely compromised in biofilm initiation, as confirmed by static microtiter and continuous culture flow cell and tubing biofilm assays. This impaired biofilm phenotype could be complemented with the wild-type psl sequences and was not due to defects in motility or lipopolysaccharide biosynthesis. These results implicate an as yet unknown exopolysaccharide as being required for the formation of the biofilm matrix. Understanding psl-encoded exopolysaccharide expression and protection in biofilms will provide insight into the pathogenesis of P. aeruginosa in cystic fibrosis and other infections involving biofilms.     

Efficient rhizosphere colonization by Pseudomonas fluorescens f113 mutants unable to form biofilms on abiotic surfaces

Motility is a key trait for rhizosphere colonization by Pseudomonas fluorescens. Mutants with reduced motility are poor competitors, and hypermotile, more competitive phenotypic variants are selected in the rhizosphere. Flagellar motility is a feature associated to planktonic, free‐living single cells, and although it is necessary for the initial steps of biofilm formation, bacteria in biofilm lack flagella. To test the correlation between biofilm formation and rhizosphere colonization, we have used P. fluorescens F113 hypermotile derivatives and mutants affected in regulatory genes which in other bacteria modulate biofilm development, namely gacS (G), sadB (S) and wspR (W). Mutants affected in these three genes and a hypermotile variant (V35) isolated from the rhizosphere were impaired in biofilm formation on abiotic surfaces, but colonized the alfalfa root apex as efficiently as the wild‐type strain, indicating that biofilm formation on abiotic surfaces and rhizosphere colonization follow different regulatory pathways in P. fluorescens. Furthermore, a triple mutant gacSsadBwspR (GSW) and V35 were more competitive than the wild‐type strain for root‐tip colonization, suggesting that motility is more relevant in this environment than the ability to form biofilms on abiotic surfaces. Microscopy showed the same root colonization pattern for P. fluorescens F113 and all the derivatives: extensive microcolonies, apparently held to the rhizoplane by a mucigel that seems to be plant produced. Therefore, the ability to form biofilms on abiotic surfaces does not necessarily correlates with efficient rhizosphere colonization or competitive colonization.     

Adhesion and biofilm development on suspended carriers in airlift reactors: hydrodynamic conditions versus surface characteristics

Adhesion and biofilm formation by Pseudomonas putida was studied using suspended carriers in laboratory airlift reactors. Standard, roughened, hydrophobic, and positively charged glass beads, sand, and basalt grains were used as carriers. The results clearly show that in airlift reactors hydrodynamic conditions and particle collisions control biofilm formation. In the reactors, on surfaces subjected to different shear levels, biofilm formation differed considerably. This could be described by a simple growth and detachment model. Increased surface roughness promoted biofilm accumulation on suspended carriers. The physicochemical surface characteristics of the carrier surface proved to be less important due to the turbulent conditions in the airlift reactors. Adhesion of P. putida to glass beads was poor, and results of an adhesion test under quiescent conditions were not predictive for adhesion and subsequent biofilm formation under reactor conditions. (c) 1997 John Wiley & Sons, Inc. Biotechnol Bioeng 55:880-889, 1997.     

Role of extracellular matrix components in the formation of biofilms and their contribution to the biocontrol activity of Pseudomonas chlororaphis PCL1606

Pseudomonas chlororaphis PCL1606 (PcPCL1606) displays plant-colonizing features and exhibits antagonistic traits against soil-borne phytopathogenic fungi. Biofilm formation could be relevant for the PcPCL1606 lifestyle, and in this study the role of some putative extracellular matrix components (EMC; Fap-like fibre, alginate and Psl-like polysaccharides) in the biofilm architecture and biocontrol activity of this bacterium were determined. EMC such as the Fap-like fibre and alginate polysaccharide play secondary roles in biofilm formation in PcPCL1606, because they are not fundamental to its biofilm architecture in flow cell chamber, but synergistically they have shown to favour bacterial competition during biofilm formation. Conversely, studies on Psl-like polysaccharide have revealed that it may contain mannose, and that it is strongly involved in the PcPCL1606 biofilm architecture and niche competition. Furthermore, the Fap-like fibre and Psl-like exopolysaccharide play roles in early surface attachment and contribute to biocontrol activity against the white root rot disease caused by Rosellinia necatrix in avocado plants. These results constitute the first report regarding the study of the extracellular matrix of the PcPCL1606 strain and highlight the importance of a putative Fap-like fibre and Psl-like exopolysaccharide produced by PcPCL1606 in the biofilm formation process and interactions with the host plant root.     

A crucial role for exopolysaccharide modification in bacterial biofilm formation, immune evasion, and virulence

Biofilms play an important role in many chronic bacterial infections. Production of an extracellular mixture of sugar polymers called exopolysaccharide is characteristic and critical for biofilm formation. However, there is limited information about the mechanisms involved in the biosynthesis and modification of exopolysaccharide components and how these processes influence bacterial pathogenesis. Staphylococcus epidermidis is an important human pathogen that frequently causes persistent infections by biofilm formation on indwelling medical devices. It produces a poly-N-acetylglucosamine molecule that emerges as an exopolysaccharide component of many bacterial pathogens. Using a novel method based on size exclusion chromatography-mass spectrometry, we demonstrate that the surface-attached protein IcaB is responsible for deacetylation of the poly-N-acetylglucosamine molecule. Most likely due to the loss of its cationic character, non-deacetylated poly-acetylglucosamine in an isogenic icaB mutant strain was devoid of the ability to attach to the bacterial cell surface. Importantly, deacetylation of the polymer was essential for key virulence mechanisms of S. epidermidis, namely biofilm formation, colonization, and resistance to neutrophil phagocytosis and human antibacterial peptides. Furthermore, persistence of the icaB mutant strain was significantly impaired in a murine model of device-related infection. This is the first study to describe a mechanism of exopolysaccharide modification that is indispensable for the development of biofilm-associated human disease. Notably, this general virulence mechanism is likely similar for other pathogenic bacteria and constitutes an excellent target for therapeutic maneuvers aimed at combating biofilm-associated infection.     

Rhizoplane colonisation of peas by Rhizobium leguminosarum bv. viceae and a deleterious Pseudomonas putida

Pseudomonas putida strain A313, a deleterious rhizosphere bacterium, reduced pea nitrogen content when inoculated alone or in combination with Rhizobium leguminosarum bv. viceae on plants in the presence of soil under greenhouse conditions. When plants were grown gnotobiotically in liquid media, mixed inocula of A313 and rhizobia gave a higher proportion of small evenly distributed nodules when compared with a single rhizobial inoculation. In addition, the rhizobial root establishment was reduced by A313 irrespective of inoculum density, indicating that A313 has the capacity to interact with the early rhizobial infection process. When pea seedlings were simultaneously inoculated with A313 and rhizobia, A313 colonised the root hairs to the same extent as the rhizobia, according to analysis by immunofluorescence microscopy. This suggests that the root hair colonisation trait of P. putida interferes with the onset of the symbiotic process.     

Calcium increases Xylella fastidiosa surface attachment, biofilm formation, and twitching motility

Xylella fastidiosa is a plant-pathogenic bacterium that forms biofilms inside xylem vessels, a process thought to be influenced by the chemical composition of xylem sap. In this work, the effect of calcium on the production of X. fastidiosa biofilm and movement was analyzed under in vitro conditions. After a dose-response study with 96-well plates using eight metals, the strongest increase of biofilm formation was observed when medium was supplemented with at least 1.0 mM CaCl(2). The removal of Ca by extracellular (EGTA, 1.5 mM) and intracellular [1,2-bis(o-aminophenoxy)ethane-N,N,N',N'-tetraacetic acid acetoxymethyl ester (BAPTA/AM), 75 μM] chelators reduced biofilm formation without compromising planktonic growth. The concentration of Ca influenced the force of adhesion to the substrate, biofilm thickness, cell-to-cell aggregation, and twitching motility, as shown by assays with microfluidic chambers and other assays. The effect of Ca on attachment was lost when cells were treated with tetracycline, suggesting that Ca has a metabolic or regulatory role in cell adhesion. A double mutant (fimA pilO) lacking type I and type IV pili did not improve biofilm formation or attachment when Ca was added to the medium, while single mutants of type I (fimA) or type IV (pilB) pili formed more biofilm under conditions of higher Ca concentrations. The concentration of Ca in the medium did not significantly influence the levels of exopolysaccharide produced. Our findings indicate that the role of Ca in biofilm formation may be related to the initial surface and cell-to-cell attachment and colonization stages of biofilm establishment, which rely on critical functions by fimbrial structures.     

Characterization of starvation‐induced dispersion in Pseudomonas putida biofilms: genetic elements and molecular mechanisms

Pseudomonas putida OUS82 biofilm dispersal was previously shown to be dependent on the gene PP0164 (here designated lapG). Sequence and structural analysis has suggested that the LapG geneproduct belongs to a family of cysteine proteinases that function in the modification of bacterial surface proteins. We provide evidence that LapG is involved in P. putida OUS82 biofilm dispersal through modification of the outer membrane‐associated protein LapA. While the P. putida lapG mutant formed more biofilm than the wild‐type, P. putida lapA and P. putida lapAG mutants displayed decreased surface adhesion and were deficient in subsequent biofilm formation, suggesting that LapG affects LapA, and that the LapA protein functions both as a surface adhesin and as a biofilm matrix component. Lowering of the intracellular c‐di‐GMP level via induction of an EAL domain protein led to dispersal of P. putida wild‐type biofilm but did not disperse P. putida lapG biofilm, indicating that LapG exerts its activity on LapA in response to a decrease in the intracellular c‐di‐GMP level. In addition, evidence is provided that associated to LapA a cellulase‐degradable exopolysaccharide is part of the P. putida biofilm matrix.     

Alginate as an auxiliary bacterial membrane: binding of membrane-active peptides by polysaccharides.

The chronicity of Pseudomonas aeruginosa infections in cystic fibrosis (CF) patients is characterized by overproduction of the exopolysaccharide alginate, in which biofilm bacteria are embedded. Alginate apparently contributes to the antibiotic resistance of bacteria in this form by acting as a diffusion barrier to positively charged antimicrobial agents. We have been investigating cationic antimicrobial peptides (CAPs) (prototypic sequence: KKAAAXAAAAAXAAWAAXAAAKKKK-NH(2), where X is any of the 20 commonly occurring amino acids) that were originally designed as transmembrane mimetic peptides. Peptides of this group above a specific hydrophobicity threshold insert spontaneously into membranes and have antibacterial activity at micromolar concentrations. While investigating the molecular basis of biofilm resistance to peptides, we found that the anionic alginate polysaccharide induces conformational changes in the most hydrophobic of these peptides typically associated with insertion of such peptides into membrane environments [Chan et al., J. Biol. Chem. (2004) vol. 279, pp. 38749-38754]. Through a combination of experiments measuring release of the fluorescent dye calcein from phospholipid vesicles, peptide interactions with vesicles in the presence and absence of alginate, and affinity of peptides for alginate as a function of net peptide core hydrophobicity, we show here that alginate offers a microenvironment that provides a protective mechanism for the encased bacteria by both binding and promoting the self-association of the CAPs. The overall results indicate that hydrophilic alginate polymers contain a significant hydrophobic compartment, and behave as an 'auxiliary membrane' for bacteria, thus identifying a unique protective role for biofilm exopolysaccharide matrices.     

Alginate overproduction affects Pseudomonas aeruginosa biofilm structure and function

During the course of chronic cystic fibrosis (CF) infections, Pseudomonas aeruginosa undergoes a conversion to a mucoid phenotype, which is characterized by overproduction of the exopolysaccharide alginate. Chronic P. aeruginosa infections involve surface-attached, highly antibiotic-resistant communities of microorganisms organized in biofilms. Although biofilm formation and the conversion to mucoidy are both important aspects of CF pathogenesis, the relationship between them is at the present unclear. In this study, we report that the overproduction of alginate affects biofilm development on an abiotic surface. Biofilms formed by an alginate-overproducing strain exhibit a highly structured architecture and are significantly more resistant to the antibiotic tobramycin than a biofilm formed by an isogenic nonmucoid strain. These results suggest that an important consequence of the conversion to mucoidy is an altered biofilm architecture that shows increasing resistance to antimicrobial treatments.