Subaquatic Fly Locomotion — Principles

The theoretical criteria essential for underwater superhydrophobicity follow from the analysis on the conditions of heterogeneous wetting. Such surfaces, when immersed in water are not wetted — a layer of air is trapped between them and the surrounding water. Here we provide an observational evidence that house flies can survive under water by exploiting underwater superhydrophobicity in association with underwater adhesion. The adhesion — resisting updraft — is probably mediated by a glue-like interfacial water layer formed on the top of the pathogens collected on the terminal setae.     

Evidence that collagen and tendon have monolayer water coverage in the native state

This paper investigates an alternative explanation for widely reported paradoxical intracellular water properties. The most frequent biological explanation assumes water structure extending multiple layers from surfaces of compactly folded macromolecules to explain large amounts of perturbed water. Long range water structuring, however, contradicts molecular models widely accepted by the scientific majority. This study questions whether the paradoxical cell water could result from larger than expected amounts of first layer interfacial water on internal protein surfaces rather than structured multilayers. Native mammalian tendon is selected for the study because (1) the organ consists of highly compact structures of a single macromolecular protein--collagen, (2) molecular structure and geometry of collagen is well characterized by X-ray diffraction, (3) molecular structure extends to the macroscopic tendon level and (4) perturbed water behavior similar to cellular water is reported on tendon. Native tendon holds 1.6 g water/g dry mass. The 62% native water content simulates the water content of many cell types. MicroCT studies of tendon dilatometry as a function of hydration are measured and correlated to X-ray diffraction measurements of interaxial separation. Correlations show that native tendon has sufficient water for only a single monolayer of interfacial water. Thus the paradoxical properties of water in native tendon are first-layer interfacial water properties. Similar water behavior on globular proteins suggests that paradoxical cell water behavior could be caused by larger than expected amounts of first layer interfacial water on internal and external macromolecular surfaces of cell components.     

Dry under water: Comparative morphology and functional aspects of air‐retaining insect surfaces

Superhydrophobic surfaces prevent certain body parts of semiaquatic and aquatic insects from getting wet while submerged in water. The air layer on these surfaces can serve the insects as a physical gill. Using scanning electron microscopy, we investigated the morphology of air‐retaining surfaces in five insect species with different levels of adaptation to aquatic habitats. We found surfaces with either large and sparse hairs (setae), small and dense hairs (microtrichia), or hierarchically structured surfaces with both types of hairs. The structural parameters and air‐film persistence of these surfaces were compared. Air‐film persistence varied between 2 days in the beetle Galerucella nymphaea possessing only sparse setae and more than 120 days in the bugs Notonecta glauca and Ilyocoris cimicoides possessing dense microtrichia (up to 6.6 × 10⁶ microtrichia per millimeter square). From our results, we conclude that the density of the surface structures is the most important factor that affects the persistence of air films. Combinations of setae and microtrichia are not decisive for the overall persistence of the air film but might provide a thick air store for a short time and a thin but mechanically more stable air film for a long time. Thus, we assume that a dense cover of microtrichia acts as a “backup system” preventing wetting of the body surface in case the air–water interface is pressed toward the surface. Our findings might be beneficial for the development of biomimetic surfaces for long‐term air retention and drag reduction under water. In addition, the biological functions of the different air retention capabilities are discussed. J. Morphol., 2011. © 2011 Wiley‐Liss, Inc.     

Nature Inspired Hay Fever Therapy

The survival oriented adaptation of evolved biosystems to variations in their environment is a selective optimization process. Recognizing the optimised end product and its functionality is the classical arena of bionic engineering. In a primordial world, however, the molecular organization and functions of prebiotic systems were solely defined by formative processes in their physical and chemical environment, for instance, the interplay between interfacial water layers on surfaces and solar light. The formative potential of the interplay between light （laser light） and interfacial water layers on surfaces was recently exploited in the formation of supercubane carbon nanocrystals. In evolved biosystems the formative potential of interracial water layers can still be activated by light. Here we report a case of hay fever, which was successfully treated in the course of a facial rejuvenation program starting in November 2007. Targeting primarily interfacial water layers on elastin fibres in the wrinkled areas, we presumably also activated mast cells in the nasal mucosa, reported to progressively decrease in the nasal mucosa of the rabbit, when frequently irradiated. Hay fever is induced by the release of mediators, especially histamine, a process associated with the degranulation of mast cells. Decrease in mast cells numbers implies a decrease in the release of histamine. To the best of our knowledge this is the first report on the treatment of hay fever with visible light. This approach was inspired by bionic thinking, and could help ameliorating the condition of millions of people suffering from hay fever world wide.     

Are nanometric films of liquid undercooled interfacial water bio-relevant?

It is known that life processes below the melting point temperature can actively evolve and establish in micrometer-sized (and larger) veins and structures in ice and permafrost soil, filled with unfrozen water. Thermodynamic arguments and experimental results indicate the existence of much smaller nanometer-sized thin films of undercooled liquid interfacial (ULI) water on surfaces of micrometer sized and larger mineral particles and microbes in icy environments far below the melting point temperature. This liquid interfacial water can be described in terms of a freezing point depression, which is due to the interfacial pressure of van der Waals forces. The physics behind the possibly also life supporting capability of nanometric films of undercooled liquid interfacial water, which also can “mantle” the surfaces of the much larger and micrometer-sized microbes, is discussed. As described, biological processes do not necessarily have to proceed in the “bulk” of the thin interfacial water, as in “vinical” water and in the micrometer-sized veins e.g., but they can be supported or are even made possible already by covering thin mantles of liquid interfacial water. These can provide liquid water for metabolic processes and act as carrier for the necessary transport of nutrients and waste. ULI water supports two different and possibly biologically relevant transport processes: 2D molecular diffusion in the interfacial film, and flow-like due to regelation. ULI-water, which is “lost” by transport into microbes, e.g., will be refilled from the neighbouring ice. In this way, the nanometric liquid environment of microbes in ULI-water is comparable to that of microbes in bulk water. Another probably also biologically relevant property of ULI is, depending on the hydrophobic or hydrophilic character of the surfaces, that it is of lower density (LDL) or higher density (HDL) than bulk water.Furthermore, capillary effects and ions in ULI-water solutions can support, enhance, and stabilize the formation of layers of interfacial water. A more detailed future investigation of the possible support of life processes by nanometric ULI water in ice is a challenge to current cryomicrobiology. Related results of Rivkina et al. [22] indeed indicate that life processes can remain active at water contents corresponding to about or less than two monolayers of ULI water.     

Bacterial S-layers.

S-layers are produced by the self assembly of proteinaceous subunits on the surfaces of prokaryotes, so that planar, monomolecular-thick crystalline lattices are formed. Some archaeal and eubacterial S-layer proteins are glycosylated. These lattices typically have center-to-center spacings of less than 25 nm, which makes them attractive for biomimetic or nanotechnological applications.     

Biomimetic Anti-Abrasion Surfaces of a Cone Form Component Against Soil

The geometrical surfaces of soil-burrowing animals were imitated and modeled on a cone component, the measuring tip part of a soil cone penetrometer. These biomimetic surfaces are concave dimples, convex domes and two wavy forms. The conventional cone surface and the biomimetic cone surfaces were analyzed in ANSYS 11.0 program to estimate cone equivalent stress and soil equivalent stress. Results show that biomimetic surfaces with the geometrical structures have lower cone equivalent stresses and soil equivalent stresses than that with conventional (smooth) surface. The least maximum cone equivalent stress and least maximum soil equivalent stress were recorded for biomimetic surfaces with concave dimples and wavy form-2 respectively. The two-body abrasive wear of biomimetic cone surfaces and conventional (smooth) cone surface were run on a rotary disk type of abrasive wear testing machine. The biomimetic cone surfaces were found to have lower abrasive wear than the conventional surface. It was found that and biomimetic cone surface with concave dimples has the lowest abrasive wear among the all tested surfaces.     

Interfacial Effects of Superhydrophobic Plant Surfaces： A Review

Nature is a huge gallery of art involving nearly perfect structures and properties over the millions of years of development. Many plants and animals show water-repellent properties with fine micro-structures, such as lotus leaf, water skipper and wings of butterfly. Inspired by these special surfaces, the artificial superhydrophobic surfaces have attracted wide attention in both basic research and industrial applications. The wetting properties of superhydrophobic surfaces in nature are affected by the chemical compositions and the surface topographies. So it is possible to realize the biomimetic superhydrophobic surfaces by tuning their surface roughness and surface free energy correspondingly. This review briefly introduces the physical-chemical basis of superhydrophobic plant surfaces in nature to explain how the superhydrophobicity of plant surfaces can be applied to different biomimetic functional materials with relevance to technological applications. Then, three classical effects of natural surfaces are classified： lotus effect, salvinia effect, and petal effect, and the promising strategies to fabricate biomimetic su- perhydrophobic materials are highlighted. Finally, the prospects and challenges of this area in the future are proposed.     

Fabrication of Biomimetic Water Strider Legs Covered with Setae

Water striders have remarkable water-repellent legs that enable them to stand effortlessly and move quickly on water.Fluidphysics indicates this feature is due to a surface-tension effect caused by the special hierarchical structure of the legs,which arecovered with a large number of inclined setae with fine nanogrooves inducing water resistance.This inspires us to fabricatespecial water-repellent structure on functional surfaces through the cooperation between the surface treatment and the surfacemicro-and nanostructures,which may bring great advantages in a wide variety of applications.In this paper we present aprocedure for fabricating biomimetic water strider legs covered with setae using Polycarbonate Track-Etched(PCTE)membranesas templates.By choosing appropriate membrane lengths,diameters,pitches and densities of the setae,the biomimeticlegs can be fabricated conveniently and at a low cost.Furthermore we investigated the relationship between stiffness of themolding materials,high aspect ratio and density,which affect the fidelity of fabrication and self adhesion,to optimize thestability of setae.The knowledge we gained from this study will offer important insights into the biomimetic design and fabricationof water strider setae.     

Effects of Biomimetic Surface Designs on Furrow Opener Performance

The effects of biomimetic designs of tine furrow opener surface on equivalent pressure and pressure in the direction ofmotion on opener surface against soil were studied by finite element method (FEM) simulation and the effects of these designson tool force and power requirements were examined experimentally.Geometrical structures of the cuticle surfaces of dungbeetle (Copris ochus Motschulsky) were examined by stereoscopy.The structures of the cuticle surfaces and Ultra High Mo-lecular Weight Polyethylene (UHMWPE) material were modeled on surface of tine furrow opener as biomimetic designs.Sevenfurrow openers were analyzed in ANSYS program (a FEM simulation software).The biomimetic furrow opener surfaces withUHMWPE structures were found to have lower equivalent pressure and pressure in the direction of motion as compared to theconventional surface and to the biomimetic surfaces with textured steel-35 structures.It was found that the tool force and powerwere increased with the cutting depth and operating speed and the biomimetic furrow opener with UHMWPE tubular sectionridges showed the lowest resistance and power requirement against soil..     

Biomimetic Superhydrophobic Surfaces with Transition Metals and Their Oxides: A Review

Transition metals and their oxide materials have been widely employed to fabricate superhydrophobic surfaces,not onlybecause of their surface topography with controllable microstructures leading to water-repellence,diverse adhesion even tunable wettability,but also due to a variety of special properties like optical performance,magnetism,anti-bacterial,transparency and so on.At the meantime,biomimetic superhydrophobic surfaces have attracted great interest from fabricating hierarchical micro-/nano-structures inspired by nature to imitate creature's properties and many potential applications,including self-cleaning,antifogging,antireflection,low drag and great stability and durability.In this review,natural surfaces and biomimetic materials with special wettability are introduced by classification according to the similar microstructure of morphology,like array structure,sheet overlapped structure,high density hairs and seta shaped structure.Not only do we exhibit their special performances,but also try to find out the true reasons behind the phenomenon.Then,the recent progress of a series of superhydrophobic transition mental and their oxide materials,including TiO2,ZnO,Fe3O4,CuO,Ag,Au and so on,is presented with a focus on fabricating methods,microstructures,wettability,and other properties.As followed,these superhydro-phobic surfaces can be applied in many fields,such as oil/water separation,self-cleaning,photo-controlled reversible wettability,surface-enhanced Raman scattering,antibacterial,anticorrosion,and synthesis of various applications.However,few of them have been applied in practical life.Hence,we discuss the remaining challenges at present and the development tendency in future at the end of this article.This review aims to present recent development of transition metals and their oxides applied in biomimetic superhydrophobic surfaces about fabrication,microstructure,water repellence,various properties,and potential applications.     

How does deep water rice solve its aeration problem

In partially flooded deep water rice (Oryza sativa L. cv Habiganj Aman II), continuous air layers trapped between the hydrophobic, corrugated surface of the leaf blades and the surrounding water constitute the major path of aeration. The conduction of gases through the internal air spaces of the leaf is negligible compared to the conduction of gases through the external air layers. The total volume of the air layers on both sides of a leaf blade is about 45% of the volume of the leaf blade itself. The size of the air layers around submerged leaf blades of cereals not adapted to conditions of partial flooding, e.g. of oats, barley, and wheat, is considerably smaller than that of rice. Gases move through the air layers not only by diffusion but also by mass flow. In darkness, air is drawn down from the atmosphere through the air layers along a pressure gradient created by solubilization of respiratory CO₂ in the surrounding water. In light, photosynthetic O₂ is expelled through the air layers to the atmosphere because the solubility of O₂ in water is much lower than that of CO₂. Air layers greatly increase the rate of photosynthetic carbon fixation by enlarging the surface of the gas-liquid interface available for CO₂ uptake from the water. Air layers are vital for the survival of the partially submerged rice plant. When leaves are washed with a dilute solution of a surfactant (Triton X-100), no air layers are formed under water. Plants without air layers do not grow in response to submergence, and the submerged parts of the plant deteriorate as evident by rapid loss of chlorophyll and protein. Air layers provide a significant survival advantage even to completely submerged rice plants.     

Square‐Centimeter‐Sized High‐Efficiency Polymer Solar Cells: How the Processing Atmosphere and Film Quality Influence Performance at Large Scale

Organic solar cells based on two benzodithiophene‐based polymers (PTB7 and PTB7‐Th) processed at square centimeter‐size under inert atmosphere and ambient air, respectively, are investigated. It is demonstrated that the performance of solar cells processed under inert atmosphere is not limited by the upscaling of photoactive layer and the interfacial layers. Thorough morphological and electrical characterizations of optimized layers and corresponding devices reveal that performance losses due to area enlargement are only caused by the sheet resistance of the transparent electrode reducing the efficiency from 9.3% of 7.8% for PTB7‐Th in the condition that both photoactive layer and the interfacial layers are of high layer quality. Air processing of photoactive layer and the interfacial layers into centimeter‐sized solar cells lead to additional, but only slight, losses (<10%) in all photovoltaic parameters, which can be addressed to changes in the electronic properties of both active layer and ZnO layers rather than changes in layer morphology. The demonstrated compatibility of polymer solar cells using solution‐processed photoactive layer and interfacial layers with large area indicates that the introduction of a standard active area of 1 cm² for measuring efficiency of organic record solar cells is feasible. However electric standards for indium tin oxides (ITO) or alternative transparent electrodes need to be developed so that performance of new photovoltaic materials can be compared at square centimeter‐size.     

Desaturation of exhaled air in camels

We have found that camels can reduce the water loss due to evaporation from the respiratory tract in two ways: (1) by decreasing the temperature of the exhaled air and (2) by removal of water vapour from this air, resulting in the exhalation of air at less than 100% relative humidity (r.h.). Camels were kept under desert conditions and deprived of drinking water. In the daytime the exhaled air was at or near body core temperature, while in the cooler night exhaled air wat at or near ambient air temperature. In the daytime the exhaled air was fully saturated, but at night its humidity might fall to approximately 75% r.h. The combination of cooling and desaturation can provide a saving of water of 60% relative to exhalation of saturated air at body temperature. The mechanism responsible for cooling of the exhaled air is a simple heat exchange between the respiratory air and the surfaces of the nasal passageways. On inhalation these surfaces are cooled by the air passing over them, and on exhalation heat from the exhaled air is given off to these cooler surfaces. The mechanism responsible for desaturation of the air appears to depend on the hygroscopic properties of the nasal surfaces when the camel is dehydrated. The surfaces give off water vapour during inhalation and take up water from the respiratory air during exhalation. We have used a simple mechanical model to demonstrate the effectiveness of this mechanism.     

Measurement of the surface free energy of bacterial cell surfaces and its relevance for adhesion.

An experimental technique is described to determine contact angles on bacterial layers deposited on cellulose triacetate filters. Measurements with water, water-n-propanol mixtures, and alpha-bromonaphthalene were employed to calculate surface free energies of various oral bacteria. Differences of 30 to 40 erg cm-2 were obtained for four different bacterial species isolated from the human oral cavity, if the concept of dispersion and polar surface free energies is applied. The free energies obtained were used to calculate interfacial free energies of adhesion of these bacteria from saliva onto tooth surfaces. Bacterial adhesion is energetically unfavorable, if the enamel surface free energy is less than 50 erg cm-2.     

Measurement of the surface free energy of bacterial cell surfaces and its relevance for adhesion

An experimental technique is described to determine contact angles on bacterial layers deposited on cellulose triacetate filters. Measurements with water, water-n-propanol mixtures, and alpha-bromonaphthalene were employed to calculate surface free energies of various oral bacteria. Differences of 30 to 40 erg cm-2 were obtained for four different bacterial species isolated from the human oral cavity, if the concept of dispersion and polar surface free energies is applied. The free energies obtained were used to calculate interfacial free energies of adhesion of these bacteria from saliva onto tooth surfaces. Bacterial adhesion is energetically unfavorable, if the enamel surface free energy is less than 50 erg cm-2.     

Interfacial water on crystalline silica: a comparative molecular dynamics simulation study

Understanding the properties of interfacial water at solid–liquid interfaces is important in a wide range of applications. Molecular dynamics is becoming a widespread tool for this purpose. Unfortunately, however, the results of such studies are known to strongly depend on the selection of force fields. It is, therefore, of interest to assess the extent by which the implemented force fields can affect the predicted properties of interfacial water. Two silica surfaces, with low and high surface hydroxyl density, respectively, were simulated implementing four force fields. These force fields yield different orientation and flexibility of surface hydrogen atoms, and also different interaction potentials with water molecules. The properties for interfacial water were quantified by calculating contact angles, atomic density profiles, surface density distributions, hydrogen bond density profiles and residence times for water near the solid substrates. We found that at low surface density of hydroxyl groups, the force field strongly affects the predicted contact angle, while at high density of hydroxyl groups, water wets all surfaces considered. From a molecular-level point of view, our results show that the position and intensity of peaks observed from oxygen and hydrogen atomic density profiles are quite different when different force fields are implemented, even when the simulated contact angles are similar. Particularly, the surfaces simulated by the CLAYFF force field appear to attract water more strongly than those simulated by the Bródka and Zerda force field. It was found that the surface density distributions for water strongly depend on the orientation of surface hydrogen atoms. In all cases, we found an elevated number of hydrogen bonds formed between interfacial water molecules. The hydrogen bond density profile does not depend strongly on the force field implemented to simulate the substrate, suggesting that interfacial water assumes the necessary orientation to maximise the number of water–water hydrogen bonds irrespectively of surface properties. Conversely, the residence time for water molecules near the interface strongly depends on the force field and on the flexibility of surface hydroxyl groups. Specifically, water molecules reside for longer times at contact with rigid substrates with high density of hydroxyl groups. These results should be considered when comparisons between simulated and experimental data are attempted.     

Ventilation and Its Effect on "Infinite Pool" Exchangers

SYNOPSIS. Unlike internal exchange surfaces, the skin contactsan "infinite pool" of air or water with which exchange of gases,water, ions, and other solutes may occur. Even though the "infinitepool" may be well mixed, an unstirred diffusion boundary layeris always present about the skin and may constitute a significantresistance to exchange. The thickness of the diffusion boundarylayer (as approximated by the fluid dynamic boundary layer)is related to the flow of the respiratory medium, viscosityand density of the medium, and the morphology of the exchangesurface. Oxygen microelectrode studies suggest that, in mostcircumstances, the diffusion boundary layer in water is at leastas thick as the blood-respiratory medium distance in amphibianskin. Accordingly, the movement of water about the skin {i.e.,skin ventilation) should have pronounced effects on cutaneousexchange, especially at low "free stream" velocities. Mountingphysiological evidence suggests that: (1) skin ventilation canaugment cutaneous gas exchange; and (2) some vertebrates activelyventilate their skins, especially in aquatic hypoxia. The ubiquityand significance of diffusion boundary layers are central toa general understanding of cutaneous exchange and all surface-mediatedexchange processes.     

An analysis on the rates and regulation of insensible water loss through the eccrine sweat glands

An analysis is presented on insensible water loss from the human body at rest through exposed skin surfaces into still air. Possible sites of moisture release are identified as the stratum corneum of the skin, free surfaces of dilute sweat liquids perpetually present in the microscopic ducts of a large population of eccrine sweat glands, and moist microvillous processes which line part of the periductal surfaces in the glands, particularly in the helical coils within the stratum spinosum of the epidermis. Water supply to the sites involves transepidermal migration across skin tissue layers, secretion and partial reabsorption of solutes and water within eccrine glands, and transport across periductal lining of eccrine glands from the surrounding connective tissues respectively. Evaporation and gas phase diffusion within eccrine ducts were modelled. Basal loss rates of water (as regulated by the ambient temperature and relative humidity and by aspects of the anatomy of and physiological factors for eccrine glands, the epidermis and the dermis) were calculated at between 1 and 20 g hr-1 at an ambient temperature of 25 degrees C and a relative humidity of 60% as an example. Such rates are significant fractions of experimental values for insensible water loss rates reported at between 4 and 35 g hr-1 in air at 22-30 degrees C and a relative humidity of 30-60%.     

A correlation between secondary structure and rheological properties of low-density lipoproteins at air/water interfaces

The secondary structure of apolipoprotein B-100 is studied within the bulk phase and at the air/water interface. In these “in viro” experiments, infrared reflection absorption spectroscopy (IRRAS) study was performed at the air/water interface while circular dichroism (CD) was conducted in the bulk phase. In the bulk phase, the conformational structure containing a significant amount of β–structure, whereas varying amount of α-helix, unordered structures, and β-sheet were observed at the air/water interface depending on the low-density lipoprotein (LDL) film interfacial pressure. The present IRRAS results demonstrate the importance of interfacial pressure-induced structural conformations on the apoB-100. A correlation between the secondary structure of the apoB-100 protein and the monomolecular film elasticity at the air/water interface was also established. The orientation of apoB-100 with respect to the LDL film-normal was found to depend on the interfacial pressure exhibited by the monomolecular film. These results may shed light on LDL’s pivotal role in the progression of atherosclerotic coronary artery disease as demonstrated previously by clinical trials.