Preference for bedding material in Syrian hamsters

This study aimed to determine whether Syrian (golden) hamsters, Mesocricetus auratus, prefer certain bedding materials and whether bedding material can affect paw condition, body weight gain and wheel-running activity. In a first experiment, 26 male hamsters had access to two connected cages, each cage containing a different bedding material (either pine shavings, aspen shavings, corn cob or wood pellets). In a second experiment, 14 male hamsters had access to four connected cages that contained the different bedding materials and also a piece of paper towel to serve as nest material. In a third experiment, 30 male hamsters were each placed in a single cage, 10 of them with pine shavings, 10 with aspen shavings and 10 with corn cob, and they were monitored for 50 days. Significant preferences in the first experiment were: pine shavings over aspen shavings, corn cob over wood pellets, pine shavings over corn cob and aspen shavings over wood pellets (aspen shavings versus corn cob was not tested). However, there was no significant preference expressed in the second experiment, suggesting that the general preference for shavings in the first experiment was based on bedding material suitability as a nesting material. No significant effect of bedding material on paw condition, body weight gain and wheel-running activity was detected. None of the four bedding materials tested in this study can be judged to be inappropriate in the short term if nesting material is added to the cage and if the litter is changed regularly.     

Long-term effects of cage-cleaning frequency and bedding type on laboratory rat health, welfare, and handleability: a cross-laboratory study

Cage-cleaning is necessary for a hygienic environment, but since rats communicate using scent, they might suffer if their cages are cleaned too frequently. Male rats (Sprague-Dawley and Wistar) were kept for five months across four animal units. Their cages were cleaned twice-weekly, weekly, or every two weeks, and contained either aspen woodchips or absorbent paper bedding. Aggression, injuries and general health, weight gain, chromodacryorrhoea (a stress-related Harderian gland secretion), handleability, and lung pathology were monitored, as was in-cage ammonia. Cleaning frequency had no clear impact on rat welfare, although frequent cleaning decreased ammonia concentrations and handleability, and non-aggressive skirmishing was highest in weekly cleaned rats. Surprisingly, bedding type did not affect ammonia, but all ammonia readings were unexpectedly low. However, rats kept on aspen had greater sneezing rates and lung pathology than those on paper bedding, but also had higher body weights. The results raise concerns about aspen bedding, which is relatively inert compared with other wood beddings, but nevertheless more harmful than paper. Animal unit significantly affected eight of the 11 variables tested, having interactive effects on five of them. The study also demonstrates the interactive effects of different animal units, casting doubt on the feasibility of standardization. We explored multiple variables of interest, so all findings require confirmation through further work. Nevertheless, cage-cleaning rates seem to affect socially housed male rats little, while bedding type has important effects on rat health.     

The bedding of laboratory animals as a source of airborne contaminants

In work environments with laboratory animals, the bedding of animals binds the excreta as well as other compounds originating from the animals and their environment. These may be generated into the ambient air when the personnel handle bedding in different procedures. This study compares the dustiness of different types of six clean and four soiled beddings from rat or mouse cages. The dust generation of clean bedding varied from <1 to 25 mg/m(3). When used in the cages of rats or mice for 4 days, the dust concentration of the beddings decreased, increased or stayed the same, depending on the type of bedding and animal species. A decrease in dustiness was, however, more common. The levels in the soiled beddings varied from <1 to 8.6 mg/m(3). In the case of the aspen chip bedding, the contents of bedding used in mouse, rat or rabbit cages were analysed for mesophilic bacteria and fungi, mycobacteria and endotoxins. All of these contaminants were variably found in the bedding samples, the maximal concentrations for bacteria were >6 500 000 colony-forming units (cfu)/g, for fungi 212 000 cfu/g, and for endotoxins 6500 ng/g (81 000 EU/g). The results showed that the bedding of laboratory animals may contain biologically effective compounds, and that these may be distributed into the ambient air depending on the characteristics of the bedding material. The dustiness of different bedding types is an important factor affecting the amount and quality of the occupational exposure of the personnel to airborne contaminants.     

Aspen wood-wool is preferred as a resting place, but does not affect intracage fighting of male BALB/c and C57BL/6J mice

Aspen wood-wool, provided as nesting material, was evaluated as a possible improvement of cage environment for 10-14-week-old inbred male mice maintained in groups of six (BALB/c n = 72 and C57BL/6J n = 36). The daily behaviour of mice was video recorded and their body weight, food consumption, weights of some organs and serum corticosterone concentrations were measured. Aggressive interactions between cage mates and against a strange intruder as well as the number of wounds on the back of the animals was monitored in order to evaluate the effect of nesting material on intermale aggression. Nesting material did not affect the daily active/passive behaviour patterns of mice, although animals clearly preferred it as a resting place. BALB/c mice given nesting material showed less weight gain and smaller brown adipose tissue weights than animals without nesting material. The other characteristics measured were not affected by the presence of nesting material in either strain. The presence of nesting material had no effect on fighting in cages. C57BL/6J mice were more aggressive than BALB/c mice according to the number of wounded animals in a cage. Wounded BALB/c mice had enlarged spleens and decreased epididymal adipose tissue weights. In conclusion, the nesting material used in this study did not adversely affect the animals. On the other hand, the material was clearly preferred to conventional bedding as a resting place. These findings suggest that nesting material may improve the cage environment of laboratory mice. Furthermore, there was an indication of strain differences in aggressive behaviour. It could be suggested that C57BL/6J mice are less tolerant towards intruders and housing six mice per cage is not suitable for this strain.     

The importance of learning young: the use of nesting material in laboratory rats

Unlike mice, adult laboratory rats do not spontaneously build nests when nesting material is offered. As a result, nesting material is often regarded as unsuitable environmental enrichment for laboratory rats. Wild rats and pet rats, however, have been observed to build complex nests from nesting material at hand. It was hypothesized that nest building in rats is an acquired behaviour, rather than genetically predisposed. To test this hypothesis, the progeny of three Wistar rats provided with nesting material (Kleenex tissues) during pregnancy and three standard-housed rats were divided in 34 same-sex couples with access to nesting material: (1) from the age of 8 weeks (n=7); (2) from weaning (n=8); (3) from birth (n=17). The latter were subdivided into two groups after weaning, one provided with Kleenex tissues (n=9), the other with Enviro-dri (n=8). At the age of 12 weeks, all couples were provided with both types of nesting material for one week. Amount, shape, and soiling of the nesting material were scored on weekdays, and behaviour of the rats was scored twice weekly. Results indicated that the older the rats were when first provided with nesting material, the greater the amount of nesting material eaten and soiled, and the nests built were less elaborate. Overall, Enviro-dri was eaten less than Kleenex tissues. It is concluded that rats need to learn the proper use of nesting material. When provided from birth, nesting material is a suitable type of environmental enrichment for laboratory rats.     

Effects of cage beddings on microsomal oxidative enzymes in rat liver

The purpose of the present studies was to evaluate the effects of some commercially available cage beddings on rat liver microsomal cytochrome P-450-dependent drug-metabolizing enzyme, ethylmorphine N-demethylase, and the carcinogen-metabolizing enzyme, benzo(a)pyrene hydroxylase. Sprague-Dawley rats were housed in cages containing cedar chip, corncob or heat-treated pinewood bedding for 3 weeks. Control rats were housed in cages on wire bottom floors containing no bedding material. Rats housed in cages containing cedar chip showed 18, 46 and 49% increases in liver cytochrome P-450 content, ethylmorphine N-demethylase and benzo(a)pyrene hydroxylase activities, respectively. The liver enzyme activities of rats housed in cages containing corncob bedding were similar to those obtained with control rats. In contrast, the pinewood-bedded rats showed a 21% decrease in ethylmorphine N-demethylase activity without affecting cytochrome P-450 content and benzo(a)pyrene hydroxylase activity. Hexobarbital-induced sleep times of the variously bedded rats were similar to those of control animals. These data suggest that the commercial bedding materials differ in their abilities to affect liver microsomal enzymes. Thus, interlaboratory variability in basal enzyme activities reported in the literature may be partly due to bedding materials used in the animal's cages.     

Evaluation of bedding and nesting materials for laboratory mice by preference tests.

Bedding and nesting materials can improve the health and environmental welfare of laboratory mice. This study was carried out to examine which items are actually preferred by mice. Two series of studies were performed on four types of floor-covering materials (Wood-shavings (Clean-chip), Cloth (Agrebe), Recycled-paper (Paper-clean), Paper (Care-feeaz), and on four types of nesting materials (Recycled-paper (Shepherd-shack), Cloth (Agrebe), Wood (Wood-cylinder), and Polycarbonate (Mouse-igloo). Preference of bedding materials was judged by the time length of staying in a cage. The results indicate that mice stayed in the cloth material (Agrebe) longer than in other bedding materials (light 51.1 +/- 5.3%, dark 51.5 +/- 2.6%). In the second experiment, the duration of stay in Agrebe was significantly longer than that in the other nesting materials in the light phase (70.9 +/- 2.4%). In the dark phase, staying time both in Agrebe and Shepherd-shack were significantly longer. These data suggest that cloth bedding and nesting is recommended for the environmental enrichment of laboratory mice.     

Absorbencies of six different rodent beddings: commercially advertised absorbencies are potentially misleading

Moisture absorbency is one of the most important characteristics of rodent beddings for controlling bacterial growth and ammonia production. However, bedding manufacturers rarely provide information on the absorbencies of available materials, and even when they do, absorption values are usually expressed per unit mass of bedding. Since beddings are usually placed into cages to reach a required depth rather than a particular mass, their volumetric absorbencies are far more relevant. This study therefore compared the saline absorbencies of sawdust, aspen woodchips, two virgin loose pulp beddings (Alpha-Dri and Omega-Dri), reclaimed wood pulp (Tek-Fresh), and corncob, calculated both by volume and by mass. Absorbency per unit volume correlated positively with bedding density, while absorbency per unit mass correlated negatively. Therefore, the relative absorbencies of the beddings were almost completely reversed depending on how absorbency was calculated. By volume, corncob was the most absorbent bedding, absorbing about twice as much saline as Tek-Fresh, the least absorbent bedding. Conversely, when calculated by mass, Tek-Fresh appeared to absorb almost three times as much saline as the corncob. Thus, in practical terms the most absorbent bedding here was corncob, followed by the loose pulp beddings; and this is generally supported by their relatively low ammonia production as seen in previous studies. Many factors other than absorbency determine whether a material is suitable as a rodent bedding, and they are briefly mentioned here. However, manufacturers should provide details of bedding absorbencies in terms of volume, in order to help predict the relative absorbencies of the beddings in practical situations.     

The Role of Microsite Conditions in Restoring Trembling Aspen (Populus tremuloides Michx) from Seed

Encouraging natural regeneration of Populus tremuloides Michx (trembling aspen) from seed is a largely unexplored means for reintroducing the species into reclamation areas. We evaluated the effects of microsite (surface contour and substrate type) on aspen seedling establishment and growth on a reclaimed coal mine. The 4.6 ha study site was divided into six 48 m‐wide strips that had 15 or 40 cm capping material salvaged from a nearby forest floor added to the mine surface. We surveyed 126 m long transects located in the center of each strip for microsite conditions, and the presence and height of aspen seedlings. We found that aspen seedlings generally preferred mineral‐organic substrates and concave microsites. To facilitate the regeneration of aspen by seed, we suggest that land managers increase small‐scale roughness and microtopographic diversity on reclaimed sites .     

Large-scale forest composition influences northern goshawk nesting in Wisconsin

The northern goshawk (Accipiter gentilis atricapillus) is a woodland raptor that uses a variety of forest types for nesting across its breeding range, but strongly depends on older forests with large trees and open understories. Goshawks may select nesting locations by maximizing the convergence of nesting and foraging habitats. Insights into goshawk responses to heterogeneous landscapes can be gained by examining the location of active nest sites through time and at multiple spatial scales. We examined the landscape-scale forest conditions that influenced the probability of active goshawk nests in the United States Forest Service, Chequamegon-Nicolet National Forest (CNNF) in northern Wisconsin. We used goshawk nest survey and monitoring data from 1997 to 2006 to determine the probability of an active nest site over time in relation to forest composition and road density at 3 scales (200-m, 500-m, and 1,000-m radii). Goshawk nests were located primarily in upland hardwood (64%), conifer (23%), and older aspen–birch (≥26 yrs old; 11%) habitat cover types. We used Bayesian temporal autoregressive models of nest locations across multiple spatial scales to analyze these data. The probability of active goshawk nest occurrence increased with increasing conifer cover (1,000 m) and decreased with increasing cover of older aspen–birch and density of primary roads (500 m). In addition, lesser proportions of older aspen–birch at intermediate scales around goshawk nests had a stronger effect on the probability of a nest being active than conifer and primary roads. Thus, the ratio of conifer cover (within 1,000 m) to older aspen–birch cover (within 500 m) in landscapes surrounding nest sites was the key driver in predicting the probability of an active nest site. This finding can be used by forest managers to help sustain the active status of a goshawk nesting area through time (i.e., annually), and foster goshawk nesting activity in areas where active nesting is not currently occurring. Published 2013. This article is a U.S. Government work and is in the public domain in the USA.     

Phosphate removal by refined aspen wood fiber treated with carboxymethyl cellulose and ferrous chloride

Biomass-based filtration media are of interest as an economical means to remove pollutants and nutrients found in stormwater runoff. Refined aspen wood fiber samples treated with iron salt solutions demonstrated limited capacities to remove (ortho)phosphate from test solutions. To provide additional sites for iron complex formation, and thereby impart a greater capacity for phosphate removal, a fiber pretreatment with an aqueous solution of a non-toxic anionic polymer, carboxymethyl cellulose (CMC), was evaluated. Problems with excessive viscosities during the screening of commercially available CMC products led to the selection of an ultra low viscosity CMC product that was still usable at a 4% concentration in water. Soxhlet extractions of chipped aspen wood and refined aspen wood fiber samples showed a higher extractives content for the refined material. Analysis of these extracts by FTIR spectroscopy suggested that the higher extractives content for the refined material resulted from the fragmentation of cell wall polymers (e.g., lignin, hemicelluloses) normally insoluble in their native states. Spectroscopic analysis of CMC and ferrous chloride treated fibers showed that the complex formed was sufficiently stable to resist removal during subsequent water washes. Equilibrium sorption data, which fit better with a Freundlich isotherm model than a Langmuir isotherm model, showed that phosphate removal could be enhanced by the CMC pretreatment. Results suggest that the process outlined may provide a facile means to improve the phosphate removal capacity of biomass-based stormwater filtration media.     

Decrease in hepatic drug-metabolizing enzyme activities after removal of rats from pine bedding

Wood is often used as a contact bedding material for laboratory animals. It has been established that wood, particularly softwood, has the potential to induce hepatic drug-metabolizing enzymes. However, to the authors' knowledge, changes in enzyme activity after removal of animals from bedding have not been characterized. The purpose of the study reported here was to determine how hepatic ethoxyresorufin-O-deethylation and p-nitrophenol hydroxylation activities alter over time after removal of rats from pine bedding. Male rats, three to four months old, raised in cages containing pine bedding, were transferred to wire-bottomed cages. At various times thereafter (up to 84 days), groups of rats were euthanized and the liver was processed to obtain microsomes. The microsomal protein and total cytochrome P450 (CYP) content and enzyme activities were determined. Significant differences in total microsomal protein or total CYP values were not observed over the 84 days, but a decrease in ethoxyresorufin-O-deethylation and p-nitrophenol hydroxylation activities was detected. For p-nitrophenol hydroxylation, the decrease was exponential, with a half-life of approximately nine days, whereas for ethoxyresorufin-O-deethylation, a rapid decrease in activity in the first week was followed by a reduced rate of decrease thereafter. Enzyme activities did not stabilize for at least six weeks. Researchers using laboratory animals should, therefore, be aware that it takes several weeks for enzyme activities to stabilize once animals are removed from the bedding.     

Palatability of transgenic birch and aspen to roe deer and mountain hare

Genetic engineering of plant resistance characteristics against fungi may unintentionally influence traits that are important for plant–herbivore interactions. We studied the palatability of transgenic birch (Betula pendula), aspen (Populus tremula) and hybrid aspen (P. tremula x tremuloides) genetically modified with the aim to improve fungal disease resistance, to selective mammalian herbivores in cafeteria tests. Roe deer (Capreolus capreolus) were fed with transgenic birch carrying a sugar beet chitinase IV gene. In the experiment with roe deer, none of the six transgenic birch lines differed significantly from the wild-type control in the proportion of consumed plant biomass. Correlation analyses suggested that sugar content did not guide the feeding preferences of roe deer but revealed a positive correlation between starch content and proportion of mass consumed. However, the variation in starch content could not be related to the level of transgene expression. Mountain hares (Lepus timidus) were fed with plant material from chitinase transgenic birch and aspen and hybrid aspen that carried a pinosylvin synthase gene from Scots pine. One transgenic birch line was significantly less palatable to hares than the wild-type control. The results of this study suggest that plant genotype may be related to the palatability of plant material when transgenic and wild-type woody plant material is used as winter food for hares. The results of this case study did not reveal changes in the palatability of the studied transgenic lines that could be readily related to the functioning of the used transgenes.     

Corn fiber as a raw material for hemicellulose and ethanol production

Corn fiber (CF) is a potential raw material for the production of various products because it is widely available in corn-producing countries. Corn fiber is a byproduct of the corn wet-milling industry and a very large amount of it (approximately 130 t/day) is produced in Hungary. The major component of corn fiber is the pericarp that consists of 35% hemicellulose, 18% cellulose and 20% remaining starch (protein, fiber oil and lignin are also present in this material). Corn fiber is presently used as animal feed. However, with continuous growth in corn processing to ethanol, there might be problems with the utilization of the surplus fibrous byproducts. In this paper the conversion of corn fiber to ethanol or other products was examined. Destarched corn fiber was pretreated by using different alkaline solutions and dissolved hemicellulose was precipitated with ethanol for the recovery of a valuable coproduct. The residual material consisting mostly of cellulose was hydrolyzed with cellulolytic enzymes and fermented into ethanol by using Saccharomyces cerevisiae.     

Embryonic death is linked to maternal identity in the leatherback turtle (Dermochelys coriacea)

Leatherback turtles have an average global hatching success rate of ~50%, lower than other marine turtle species. Embryonic death has been linked to environmental factors such as precipitation and temperature, although, there is still a lot of variability that remains to be explained. We examined how nesting season, the time of nesting each season, the relative position of each clutch laid by each female each season, maternal identity and associated factors such as reproductive experience of the female (new nester versus remigrant) and period of egg retention between clutches (interclutch interval) affected hatching success and stage of embryonic death in failed eggs of leatherback turtles nesting at Playa Grande, Costa Rica. Data were collected during five nesting seasons from 2004/05 to 2008/09. Mean hatching success was 50.4%. Nesting season significantly influenced hatching success in addition to early and late stage embryonic death. Neither clutch position nor nesting time during the season had a significant affect on hatching success or the stage of embryonic death. Some leatherback females consistently produced nests with higher hatching success rates than others. Remigrant females arrived earlier to nest, produced more clutches and had higher rates of hatching success than new nesters. Reproductive experience did not affect stage of death or the duration of the interclutch interval. The length of interclutch interval had a significant affect on the proportion of eggs that failed in each clutch and the developmental stage they died at. Intrinsic factors such as maternal identity are playing a role in affecting embryonic death in the leatherback turtle.     

Bed-building in captive chimpanzees (Pan troglodytes): the importance of early rearing

In the wild, great apes sleep in beds they make by successively bending branches into an interwoven platform. These beds are functionally more closely related to human beds than they are to the nests and tree-holes used by other primate species. The idea that bed-building by great apes is learned behavior that is dependent on appropriate early experiences has been proposed but never fully tested. In the present study this hypothesis was indirectly tested in 73 captive adult chimpanzees (Pan troglodytes; 27 wild-born and 46 captive-born). Bed-building and use were tested experimentally by the introduction of three sets of bedding materials. Over 200 hr of scan-sampling data were collected during 45-min observations following introduction of the bedding material. The wild-born subjects built and used beds significantly more often than the captive-born subjects. Also, wild-born subjects used more complex techniques during construction. Captive-born subjects that were mother-reared through early adolescence spent more time building and using beds than their nursery-reared counterparts. These differences remained consistent even when previous adult experience with bedding (measured as naturalistic vs. traditional housing) was accounted for. These results suggest that bed-building is a learned behavior that requires early experience and practice for acquisition.     

Habitat selection and polygyny in breeding Corn Buntings Miliaria calandra

Unlike many other polygynous passerine species, female Corn Buntings Miliaria calandra apparently do not suffer costs by pairing polygynously, yet it is unclear whether this is because polygynous males hold the highest quality territories or because pairing with polygynous males is unimportant in determining female reproductive success. Male Corn Buntings on North Uist, Scotland, consistently defended territories which contained nesting habitat, and females often foraged outside male territories when provisioning nestlings. Females showed strong preferences for nesting in uncultivated land, and 80% of nests were under Hogweed Heracleum sphondylium, possibly because this provided cover against predation and the weather. When provisioning nestlings, females showed strong preferences for foraging in cereal crops, probably because this habitat provided better food resources and/or better cover from predators. Males were unpaired or paired with one to three females per breeding season, but variation in territory size or vegetation composition did not explain differences in the number of females paired with individual males. We suggest that when females neither gain benefits nor suffer costs by breeding polygynously, and males do not differ greatly in the areas of habitat selected, polygyny can arise through random female settlement within the nesting habitat.     

Cavity type influences abundance of nest-dwelling avian blow flies: an experiment with tree swallows

1. Diverse assemblages of blood-feeding parasitic arthropods occupy the nests of birds, and nest temperature and humidity can strongly influence the population dynamics of these ectoparasites, with important implications for parasite–host relationships. 2. This study used two types of nest box that differed in internal microclimates, one constructed of plywood and the other constructed of boles of aspen (Populus tremuloides Michx.), more closely replicating natural cavities, to examine how nest microclimate affects the prevalence and abundance of nest-dwelling larval blow flies (Protocalliphora and Trypocalliphora spp.) in nests of tree swallows (Tachycineta bicolor Vieillot, 1808). 3. Based on known microclimatic differences between the box types and responses of larval blow flies to different temperatures, it was predicted that the microclimate of plywood boxes would be more favourable for growth and development of larval blow flies, and therefore have higher abundance, and possibly higher prevalence, of larval blow flies. 4. Plywood nest boxes had higher abundance, but not prevalence, of larval blow flies compared with aspen boxes at two different geographical locations in Canada. Nest composition also differed between box types, particularly at one site, where aspen boxes contained more nesting material (grass and feathers) than did plywood boxes. 5. Although it seems probable that microclimate was driving the differences between box types in abundance of larval blow flies, several additional explanations are discussed. These findings may have implications for conservation efforts, particularly those where nest boxes are used to aid in the recovery of declining bird populations.     

Preferences of group-housed female mice regarding structure of softwood bedding

Bedding influences various parameters in the housing of laboratory mice, such as health, physiology and behaviour (often considered as being integral parts of welfare). Notwithstanding existent studies about bedding preferences of individually tested mice, data about group-housed mice are still lacking. The aim of this study was to find out the structure preference for softwood bedding of group-housed mice. One hundred and eight 8-week-old female mice (C57BL6/JOlaHsd and BALB/cOlaHsd) were housed in groups of three and were given one-week free access to two different bedding structures at a time. In three test combinations, softwood shaving bedding was tested versus softwood chip bedding products of three different particle sizes (fine/medium/coarse-grained). The preference test was performed in a DoubleCage system composed of two Makrolon type IIL cages, connected by a perspex tunnel. This validated system was able to detect the crossings of each individual animal with correct crossing time and direction. On the basis of these data, dwelling times on the particular bedding structures were statistically analysed as a parameter for bedding preferences. In all three test combinations, a highly significant shaving preference was detected. On average, mice spent 70% of their dwelling time on the shavings. This preference was more explicit during the light period and in C57BL/6J mice. The relative ranking of the bedding structures was: shavings > coarse-grained chips > medium chips = fine chips. By means of these results, a shaving structure as bedding can be recommended for laboratory mice, whereas fine chip structures should be avoided.