The structure of parvoviruses

Capsids of autonomous parvoviruses are assembled from two proteins, VP1 and VP2, which overlap in sequence, with VP1 having additional amino-terminal residues. Empty capsids can be assembled from VP2 alone. Post-translational cleavage of assembled particles can modify some of the proteins by truncation of a few of the amino-terminal residues of VP2 to generate VP3 in full virions. The structures of canine parvovirus (CPV) and feline panleukopenia virus (FPV) have been solved to better than 3·5 Å resolution, while the structure of human parvovirus, B19, has been determined to 8 Å resolution only. In each case the T=1 icosahedron is made up of 60 copies of a mixture of VP1, VP2 and VP3, where each subunit has a structural motif common to many other RNA and DNA viruses, consisting of an eight-stranded anti-parallel β-barrel. The surface of the capsid is made up primarily of large elaborate loops which connect the β-strands that make up the barrel. Variation in the amino acid sequence and topology of these loops account for differing biological properties.     

Immature and mature human astrovirus: structure, conformational changes, and similarities to hepatitis e virus

Human astroviruses (HAstVs) are a major cause of gastroenteritis. HAstV assembles from the structural protein VP90 and undergoes a cascade of proteolytic cleavages. Cleavage to VP70 is required for release of immature particles from cells, and subsequent cleavage by trypsin confers infectivity. We used electron cryomicroscopy and icosahedral image analysis to determine the first experimentally derived, three-dimensional structures of an immature VP70 virion and a fully proteolyzed, infectious virion. Both particles display T = 3 icosahedral symmetry and nearly identical solid capsid shells with diameters of ~ 350 Å. Globular spikes emanate from the capsid surface, yielding an overall diameter of ~ 440 Å. While the immature particles display 90 dimeric spikes, the mature capsid only displays 30 spikes, located on the icosahedral 2-fold axes. Loss of the 60 peripentonal spikes likely plays an important role in viral infectivity. In addition, immature HAstV bears a striking resemblance to the structure of hepatitis E virus (HEV)-like particles, as previously predicted from structural similarity of the crystal structure of the astrovirus spike domain with the HEV P-domain [Dong, J., Dong, L., Méndez, E. &; Tao, Y. (2011). Crystal structure of the human astrovirus capsid spike. Proc. Natl. Acad. Sci. USA 108, 12681–12686]. Similarities between their capsid shells and dimeric spikes and between the sequences of their capsid proteins suggest that these viral families are phylogenetically related and may share common assembly and activation mechanisms.     

Three-Dimensional Structure of Aleutian Mink Disease Parvovirus: Implications for Disease Pathogenicity

The three-dimensional structure of expressed VP2 capsids of Aleutian mink disease parvovirus strain G (ADVG-VP2) has been determined to 22 A resolution by cryo-electron microscopy and image reconstruction techniques. A structure-based sequence alignment of the VP2 capsid protein of canine parvovirus (CPV) provided a means to construct an atomic model of the ADVG-VP2 capsid. The ADVG-VP2 reconstruction reveals a capsid structure with a mean external radius of 128 A and several surface features similar to those found in human parvovirus B19 (B19), CPV, feline panleukopenia virus (FPV), and minute virus of mice (MVM). Dimple-like depressions occur at the icosahedral twofold axes, canyon-like regions encircle the fivefold axes, and spike-like protrusions decorate the threefold axes. These spikes are not present in B19, and they are more prominent in ADV compared to the other parvoviruses owing to the presence of loop insertions which create mounds near the threefold axes. Cylindrical channels along the fivefold axes of CPV, FPV, and MVM, which are surrounded by five symmetry-related beta-ribbons, are closed in ADVG-VP2 and B19. Immunoreactive peptides made from segments of the ADVG-VP2 capsid protein map to residues in the mound structures. In vitro tissue tropism and in vivo pathogenic properties of ADV map to residues at the threefold axes and to the wall of the dimples.     

Docking of a human rhinovirus neutralizing antibody onto the viral capsid

The structure of the complex between the Fab fragment of a human rhinovirus serotype 2 (HRV2) neutralizing antibody (8F5) and a cross-reactive synthetic peptide derived from the viral capsid protein VP2 has been recently determined by crystallographic methods.¹ The conformation adopted by the peptide was very similar to and could be superimposed onto the corresponding region of the viral protein VP2 of human rhinovirus 1A (HRV1A) whose three-dimensional structure is known.² The structure of the Fab fragment determined in the complex was docked onto the viral capsid using the superimposition transformation found for the peptide. In the resulting model the Fab protrudes almost radially to about 60 Å from the surface of the virion without any major steric problem. The Fab fragment was then placed on each one of the 60 equivalent epitopes using the T = 1 icosahedral symmetry of the virus. The closest pairs of Fab fragments are related by viral 2-fold axes and run almost parallel to each other without clashing. These axes of symmetry from the viral particle could thus be coincident with the dyad axes of the antibodies. Furthermore, comparison of the three-dimensional structure of the Fab/peptide complex with the structure of the Fab fragment alone³ indicates that the flexibility of the antibody's elbow would facilitate bivalent attachment to the same viral particle. In accordance with the docking results, experimental determination of the stoichiometry of binding yielded a ratio of 30 IgG molecules per virion also suggesting bivalent attachment of antibody 8F5 onto the viral particle. The neutralization of viral infectivity, being neither aggregation (this paper) nor inhibition of receptor binding,⁴ might be mainly achieved by reducing viral spread from cell to cell and/or inhibition of uncoating. © 1995 Wiley-Liss, Inc.     

Structure of adeno-associated virus serotype 5

Adeno-associated virus serotype 5 (AAV5) requires sialic acid on host cells to bind and infect. Other parvoviruses, including Aleutian mink disease parvovirus (ADV), canine parvovirus (CPV), minute virus of mice, and bovine parvovirus, also bind sialic acid. Hence, structural homology may explain this functional homology. The amino acids required for CPV sialic acid binding map to a site at the icosahedral twofold axes of the capsid. In contrast to AAV5, AAV2 does not bind sialic acid, but rather binds heparan sulfate proteoglycans at its threefold axes of symmetry. To explore the structure-function relationships among parvoviruses with respect to cell receptor attachment, we determined the structure of AAV5 by cryo-electron microscopy (cryo-EM) and image reconstruction at a resolution of 16 A. Surface features common to some parvoviruses, namely depressions encircling the fivefold axes and protrusions at or surrounding the threefold axes, are preserved in the AAV5 capsid. However, even though there were some similarities, a comparison of the AAV5 structure with those of ADV and CPV failed to reveal a feature which could account for the sialic acid binding phenotype common to all three viruses. In contrast, the overall surface topologies of AAV5 and AAV2 are similar. A pseudo-atomic model generated for AAV5 based on the crystal structure of AAV2 and constrained by the AAV5 cryo-EM envelope revealed differences only in surface loop regions. Surprisingly, the surface topologies of AAV5 and AAV2 are remarkably similar to that of ADV despite only exhibiting approximately 20% identity in amino acid sequences. Thus, capsid surface features are shared among parvoviruses and may not be unique to their replication phenotypes, i.e., whether they require a helper or are autonomous. Furthermore, specific surface features alone do not explain the variability in carbohydrate requirements for host cell receptor interactions among parvoviruses.     

Expression of Aleutian mink disease parvovirus capsid proteins in defined segments: localization of immunoreactive sites and neutralizing epitopes to specific regions.

The capsid proteins of the ADV-G isolate of Aleutian mink disease parvovirus (ADV) were expressed in 10 nonoverlapping segments as fusions with maltose-binding protein in pMAL-C2 (pVP1, pVP2a through pVP2i). The constructs were designed to capture the VP1 unique sequence and the portions analogous to the four variable surface loops of canine parvovirus (CPV) in individual fragments (pVP2b, pVP2d, pVP2e, and pVP2g, respectively). The panel of fusion proteins was immunoblotted with sera from mink infected with ADV. Seropositive mink infected with either ADV-TR, ADV-Utah, or ADV-Pullman reacted preferentially against certain segments, regardless of mink genotype or virus inoculum. The most consistently immunoreactive regions were pVP2g, pVP2e, and pVP2f, the segments that encompassed the analogs of CPV surface loops 3 and 4. The VP1 unique region was also consistently immunoreactive. These findings indicated that infected mink recognize linear epitopes that localized to certain regions of the capsid protein sequence. The segment containing the hypervariable region (pVP2d), corresponding to CPV loop 2, was also expressed from ADV-Utah. An anti-ADV-G monoclonal antibody and a rabbit anti-ADV-G capsid antibody reacted exclusively with the ADV-G pVP2d segment but not with the corresponding segment from ADV-Utah. Mink infected with ADV-TR or ADV-Utah also preferentially reacted with the pVP2d sequence characteristic of that virus. These results suggested that the loop 2 region may contain a type-specific linear epitope and that the epitope may also be specifically recognized by infected mink. Heterologous antisera were prepared against the VP1 unique region and the four segments capturing the variable surface loops of CPV. The antisera against the proteins containing loop 3 or loop 4, as well as the anticapsid antibody, neutralized ADV-G infectivity in vitro and bound to capsids in immune electron microscopy. These results suggested that regions of the ADV capsid proteins corresponding to surface loops 3 and 4 of CPV contain linear epitopes that are located on the external surface of the ADV capsid. Furthermore, these linear epitopes contain neutralizing determinants. Computer comparisons with the CPV crystal structure suggest that these sequences may be adjacent to the threefold axis of symmetry of the viral particle.     

Capsid protein evolution and comparative phylogeny of novel porcine parvoviruses

In addition to the well known “classical” porcine parvovirus (PPV1; responsible for reproductive failure of susceptible sows) several new porcine parvoviruses have been recognized (PPV2, PPV3 and PPV4) in recent years. The genetic variation, characteristics and evolutionary factors shaping these novel PPVs were studied by comparing the complete capsid (cap) genes of PPVs from domestic pigs and wild boars. Using Bayesian coalescent methods we estimated the rate of nucleotide substitution for PPV2, PPV3 and PPV4 to be of the order of 3.86 × 10^?4–8.23 × 10^?4 subs site^?1 year^?1, similar to those commonly measured for RNA viruses, although this rate in case of PPV2 is probably influenced by frequent recombination events. Given such rapid evolutionary dynamics, it is likely that novel PPVs will continue to improve their capacity to spread among Suidae hosts worldwide. The mean time to the most recent common ancestor for the sampled genetic diversity of the newly discovered porcine parvoviruses was estimated. The results indicated that novel PPVs originated within approximately the last 70 years. Incongruent phylogenetic relationships of several strains suggested recombination events supported by several recombination-detecting methods and by split-decomposition phylogenetic networks. Analyses of the selective constraints acting on each codon suggest that some regions of PPV cap genes were under positive selection. This study showed that inter- and intraspecies recombination and diversifying selection pressures are prevalent across the cap genes of novel PPVs, and beside host switching and gene flow are important driving forces of their evolution and may be significant factors in the emergence of new viral variants.     

Canine parvovirus host range is determined by the specific conformation of an additional region of the capsid.

We analyzed a region of the capsid of canine parvovirus (CPV) which determines the ability of the virus to infect canine cells. This region is distinct from those previously shown to determine the canine host range differences between CPV and feline panleukopenia virus. It lies on a ridge of the threefold spike of the capsid and is comprised of five interacting loops from three capsid protein monomers. We analyzed 12 mutants of CPV which contained amino acid changes in two adjacent loops exposed on the surface of this region. Nine mutants infected and grew in feline cells but were restricted in replication in one or the other of two canine cell lines tested. Three other mutants whose genomes contain mutations which affect one probable interchain bond were nonviable and could not be propagated in either canine or feline cells, although the VP1 and VP2 proteins from those mutants produced empty capsids when expressed from a plasmid vector. Although wild-type and mutant capsids bound to canine and feline cells in similar amounts, infection or viral DNA replication was greatly reduced after inoculation of canine cells with most of the mutants. The viral genomes of two host range-restricted mutants and two nonviable mutants replicated to wild-type levels in both feline and canine cells upon transfection with plasmid clones. The capsids of wild-type CPV and two mutants were similar in susceptibility to heat inactivation, but one of those mutants and one other were more stable against urea denaturation. Most mutations in this structural region altered the ability of monoclonal antibodies to recognize epitopes within a major neutralizing antigenic site, and that site could be subdivided into a number of distinct epitopes. These results argue that a specific structure of this region is required for CPV to retain its canine host range.     

B-cell epitopes of canine parvovirus: distribution on the primary structure and exposure on the viral surface.

Ten antigenic sites on canine parvovirus (CPV) were mapped with a complete set of overlapping nonapeptides of the capsid proteins VP1 and VP2: five of these sites were recognized by sera from CPV-infected dogs, three were recognized by a rabbit anti-CPV antiserum, and two were recognized by murine monoclonal anti-CPV antibodies. A region covering the first 21 amino-terminal amino acid residues of VP2 was recognized by three sera from infected dogs, one neutralizing rabbit antiserum, and one neutralizing murine monoclonal antibody. Immunoabsorption experiments with full virions indicated that at least 6 of the 10 antigenic sites are located on the surface. Of these six, three sites occur in the amino terminus of VP2. When superimposed on the three-dimensional structure of canine parvovirus (J. Tsao, M. S. Chapman, M. Agbandje, W. Keller, K. Smith, H. Wu, M. Luo, T. J. Smith, M. G. Rossmann, R. W. Compans, and C. R. Parrish, Science 251:1456-1464, 1991), the other three epitopes are located on two loops of VP2 which form the highly exposed "spike" around the threefold-symmetry axis of the virus. Thus, these regions (amino terminus and loops 1 and 3) are of interest as major target sites for induction of neutralizing antibodies.     

Nucleotide sequence of the coat protein gene of canine parvovirus.

The nucleotide sequence of the canine parvovirus (CPV2) from map units 33 to 95 has been determined. This includes the entire coat protein gene and noncoding sequences at the 3' end of the gene, exclusive of the terminal inverted repeat. The predicted capsid protein structures are discussed and compared with those of the rodent parvoviruses H-1 and MVM.     

Specificity of an anti-capsid antibody associated with Hepatitis B Virus-related acute liver failure

Previously, the livers of patients suffering from acute liver failure (ALF), a potentially fatal syndrome arising from infection by Hepatitis B Virus (HBV), were found to contain massive amounts of an antibody specific for the core antigen (HBcAg) capsid. We have used cryo-electron microscopy and molecular modeling to define its epitope. HBV capsids are icosahedral shells with 25 Å-long dimeric spikes, each a 4-helix bundle, protruding from the contiguous “floor”. Of the anti-HBcAg antibodies previously characterized, most bind around the spike tip while one binds to the floor. The ALF-associated antibody binds tangentially to a novel site on the side of the spike. This epitope is conformational. The Fab binds with high affinity to its principal determinants but has lower affinities for quasi-equivalent variants. The highest occupancy site is on one side of a spike, with no detectable binding to the corresponding site on the other side. Binding of one Fab per dimer was also observed by analytical ultracentrifugation. The Fab did not bind to the e-antigen dimer, a non-assembling variant of capsid protein. These findings support the propositions that antibodies with particular specificities may correlate with different clinical expressions of HBV infection and that antibodies directed to particular HBcAg epitopes may be involved in ALF pathogenesis.     

Expression and subcellular targeting of canine parvovirus capsid proteins in baculovirus-transduced NLFK cells

A mammalian baculovirus delivery system was developed to study targeting in Norden Laboratories feline kidney (NLFK) cells of the capsid proteins of canine parvovirus (CPV), VP1 and VP2, or corresponding counterparts fused to EGFP. VP1 and VP2, when expressed alone, both had equal nuclear and cytoplasmic distribution. However, assembled form of VP2 had a predominantly cytoplasmic localization. When VP1 and VP2 were simultaneously present in cells, their nuclear localization increased. Thus, confocal immunofluorescence analysis of cells transduced with the different baculovirus constructs or combinations thereof in the absence or presence of infecting CPV revealed that the VP1 protein is a prerequisite for efficient targeting of VP2 to the nucleus. The baculovirus vectors were functional and the genes of interest efficiently introduced to this CPV susceptible mammalian cell line. Thus, we show evidence that the system could be utilized to study targeting of the CPV capsid proteins.     

Antigenic structure of human hepatitis A virus defined by analysis of escape mutants selected against murine monoclonal antibodies.

We examined the antigenic structure of human hepatitis A virus (HAV) by characterizing a series of 21 murine monoclonal-antibody-resistant neutralization escape mutants derived from the HM175 virus strain. The escape phenotype of each mutant was associated with reduced antibody binding in radioimmunofocus assays. Neutralization escape mutations were identified at the Asp-70 and Gln-74 residues of the capsid protein VP3, as well as at Ser-102, Val-171, Ala-176, and Lys-221 of VP1. With the exception of the Lys-221 mutants, substantial cross-resistance was evident among escape mutants tested against a panel of 22 neutralizing monoclonal antibodies, suggesting that the involved residues contribute to epitopes composing a single antigenic site. As mutations at one or more of these residues conferred resistance to 20 of 22 murine antibodies, this site appears to be immunodominant in the mouse. However, multiple mutants selected independently against any one monoclonal antibody had mutations at only one or, at the most, two amino acid residues within the capsid proteins, confirming that there are multiple epitopes within this antigenic site and suggesting that single-amino-acid residues contributing to these epitopes may play key roles in the binding of individual antibodies. A second, potentially independent antigenic site was identified by three escape mutants with different substitutions at Lys-221 of VP1. These mutants were resistant only to antibody H7C27, while H7C27 effectively neutralized all other escape mutants. These data support the existence of an immunodominant neutralization site in the antigenic structure of hepatitis A virus which involves residues of VP3 and VP1 and a second, potentially independent site involving residue 221 of VP1.     

The VP1 N-terminal sequence of canine parvovirus affects nuclear transport of capsids and efficient cell infection.

The unique N-terminal region of the parvovirus VP1 capsid protein is required for infectivity by the capsids but is not required for capsid assembly. The VP1 N terminus contains a number of groups of basic amino acids which resemble classical nuclear localization sequences, including a conserved sequence near the N terminus comprised of four basic amino acids, which in a peptide can act to transport other proteins into the cell nucleus. Testing with a monoclonal antibody recognizing residues 2 to 13 of VP1 (anti-VP1-2-13) and with a rabbit polyclonal serum against the entire VP1 unique region showed that the VP1 unique region was not exposed on purified capsids but that it became exposed after treatment of the capsids with heat (55 to 75 degrees C), or urea (3 to 5 M). A high concentration of anti-VP1-2-13 neutralized canine parvovirus (CPV) when it was incubated with the virus prior to inoculation of cells. Both antibodies blocked infection when injected into cells prior to virus inoculation, but neither prevented infection by coinjected infectious plasmid DNA. The VP1 unique region could be detected 4 and 8 h after the virus capsids were injected into cells, and that sequence exposure appeared to be correlated with nuclear transport of the capsids. To examine the role of the VP1 N terminus in infection, we altered that sequence in CPV, and some of those changes made the capsids inefficient at cell infection.     

Structure of Bombyx mori densovirus 1, a silkworm pathogen

Bombyx mori densovirus 1 (BmDNV-1), a major pathogen of silkworms, causes significant losses to the silk industry. The structure of the recombinant BmDNV-1 virus-like particle has been determined at 3.1-? resolution using X-ray crystallography. It is the first near-atomic-resolution structure of a virus-like particle within the genus Iteravirus. The particles consist of 60 copies of the 55-kDa VP3 coat protein. The capsid protein has a β-barrel "jelly roll" fold similar to that found in many diverse icosahedral viruses, including archaeal, bacterial, plant, and animal viruses, as well as other parvoviruses. Most of the surface loops have little structural resemblance to other known parvovirus capsid proteins. In contrast to vertebrate parvoviruses, the N-terminal β-strand of BmDNV-1 VP3 is positioned relative to the neighboring 2-fold related subunit in a "domain-swapped" conformation, similar to findings for other invertebrate parvoviruses, suggesting domain swapping is an evolutionarily conserved structural feature of the Densovirinae.     

Cryo-EM study of Hepatitis B virus core antigen capsids decorated with antibodies from a human patient

The capsid (core antigen, HBcAg) is one of three major antigens present in patients infected with Hepatitis B virus. The capsids are icosahedral particles, whose most prominent features are spikes that extend 25 Å out from the contiguous “floor”. At the spike tip are two copies of the “immunodominant loop”. Previously, the epitopes of seven murine monoclonal antibodies have been identified by cryo-EM analysis of Fab-labeled capsids. All but one are conformational and all but one map around the spike tip. The exception, which is also the tightest-binder, straddles an inter-molecular interface on the floor. Seeking to relate these observations to the immunological response of infected humans, we isolated anti-cAg antibodies from a patient, prepared Fabs, and analyzed their binding to capsids. A priori, one possibility was that many different Fabs would give an undifferentiated continuum of Fab-related density. In fact, the density observed was highly differentiated and could be reproduced by modeling with just five Fabs, three binding to the spike and two to the floor. These results show that epitopes on the floor, far (～30 Å) from the immunodominant loop, are clinically relevant and that murine anti-cAg antibodies afford a good model for the human system.     

犬细小病毒VP2亲水性编码区的表达与免疫原性分析

目的：探讨犬细小病毒VP2亲水性编码区的免疫原性,为进一步研究基因工程亚单位疫苗奠定基础。方法：利用蛋白质分析软件Protean对已克隆的犬细小病毒VP2基因序列进行分析,选择亲水性好、抗原性强的293-520位氨基酸区域（命名为VP2S）作为靶序列,然后以已有VP2序列作为模版通过PCR扩增的方法获得VP2S,将VP2S克隆入pQE-31载体获得pQE-31-VP2S;将pQE-31-VP2S的原核表达产物经Western-blotting确认后免疫小鼠,用血凝抑制试验测定抗体水平。结果：293～520位氨基酸区域的亲水性好、抗原性强;重组质粒pQE-31-VP2S可成功表达大约29KDa的能被CPV抗血清识别的VP2S;VP2S能诱导小鼠产生高滴度的血凝抑制（HI）抗体（25）。结论：VP2S具有较强的免疫原性,能作为基因工程亚单位疫苗进行开发研究。     

Rat Parvovirus Type 1: the Prototype for a New Rodent Parvovirus Serogroup

A newly recognized parvovirus of laboratory rats, designated rat parvovirus type 1a (RPV-1a), was found to be antigenically distinct. It was cloned, sequenced, and compared with the University of Massachusetts strain of rat virus (RV-UMass) and other autonomous parvoviruses. RPV-1a VP1 identity with these viruses never exceeded 69%, thus explaining its antigenic divergence. In addition, RPV-1a had reduced amino acid identity in NS coding regions (82%), reflecting phylogenetic divergence from other rodent parvoviruses. RPV-1a infection in rats had a predilection for endothelium and lymphoid tissues as previously reported for RV. Infectious RPV-1a was isolated 3 weeks after inoculation of infant rats, suggesting that it, like RV, may result in persistent infection. In contrast to RV, RPV-1a was enterotropic, a characteristic previously associated with parvovirus infections of mice rather than rats. RPV-1a also differed from RV in that infection was nonpathogenic for infant rats under conditions where RV infection causes high morbidity and mortality. Thus, RPV-1a is the prototype virus of an antigenically, genetically, and biologically distinct rodent parvovirus serogroup.     

Conformational changes in the VP1-unique region of native human parvovirus B19 lead to exposure of internal sequences that play a role in virus neutralization and infectivity

The unique region of the capsid protein VP1 (VP1u) of human parvovirus B19 (B19) elicits a dominant immune response and has a phospholipase A(2) (PLA(2)) activity, which is necessary for the infection. In contrast to the rest of the parvoviruses, the VP1u of B19 is thought to occupy an external position in the virion, making this region a promising candidate for vaccine development. By using a monoclonal antibody against the most-N-terminal portion of VP1u, we revealed that this region rich in neutralizing epitopes is not accessible in native capsids. However, exposure of capsids to increasing temperatures or low pH led to its progressive accessibility without particle disassembly. Although unable to bind free virus or to block virus attachment to the cell, the anti-VP1u antibody was neutralizing, suggesting that the exposure of the epitope and the subsequent virus neutralization occur only after receptor attachment. The measurement of the VP1u-associated PLA(2) activity of B19 capsids revealed that this region is also internal but becomes exposed in heat- and in low-pH-treated particles. In sharp contrast to native virions, the VP1u of baculovirus-derived B19 capsids was readily accessible in the absence of any treatment. These results indicate that stretches of VP1u of native B19 capsids harboring neutralizing epitopes and essential functional motifs are not external to the capsid. However, a conformational change renders these regions accessible and triggers the PLA(2) potential of the virus. The results also emphasize major differences in the VP1u conformation between natural and recombinant particles.     

The crystallographic structure of Panicum Mosaic Virus (PMV)

The structure of Panicum Mosaic Virus (PMV) was determined by X-ray diffraction analysis to 2.9 Å resolution. The crystals were of pseudo symmetry F23; the true crystallographic unit cell was of space group P2₁ with a = 411.7 Å, b = 403.9 Å and c = 412.5 Å, with β = 89.7°. The asymmetric unit was two entire T = 3 virus particles, or 360 protein subunits. The structure was solved by conventional molecular replacement from two distant homologues, Cocksfoot Mottle Virus (CfMV) and Tobacco Necrosis Virus (TNV), of ～20% sequence identity followed by phase extension. The model was initially refined with exact icosahedral constraints and then with icosahedral restraints. The virus has Ca⁺⁺ ions octahedrally coordinated by six aspartic acid residues on quasi threefold axes, which is completely different than for either CfMV or TNV. Amino terminal residues 1–53, 1–49 and 1–21 of the A, B and C subunits, respectively, and the four C-terminal residues (239–242) are not visible in electron density maps. The additional ordered residues of the C chain form a prominent “arm” that intertwines with symmetry equivalent “arms” at icosahedral threefold axes, as was seen in both CfMV and TNV. A 17 nucleotide hairpin segment of genomic RNA is icosahedrally ordered and bound at 60 equivalent sites at quasi twofold A–B subunit interfaces at the interior surface of the capsid. This segment of RNA may serve as a conformational switch for coat protein subunits, as has been proposed for similar RNA segments in other viruses.