Non-random mating for selection with restricted rates of inbreeding and overlapping generations

Minimum coancestry mating with a maximum of one offspring per mating pair (MC1) is compared with random mating schemes for populations with overlapping generations. Optimum contribution selection is used, whereby ΔF is restricted. For schemes with ΔF restricted to 0.25% per year, 256 animals born per year and heritability of 0.25, genetic gain increased with 18% compared with random mating. The effect of MC1 on genetic gain decreased for larger schemes and schemes with a less stringent restriction on inbreeding. Breeding schemes hardly changed when omitting the iteration on the generation interval to find an optimum distribution of parents over age-classes, which saves computer time, but inbreeding and genetic merit fluctuated more before the schemes had reached a steady-state. When bulls were progeny tested, these progeny tested bulls were selected instead of the young bulls, which led to increased generation intervals, increased selection intensity of bulls and increased genetic gain (35% compared to a scheme without progeny testing for random mating). The effect of MC1 decreased for schemes with progeny testing. MC1 mating increased genetic gain from 11–18% for overlapping and 1–4% for discrete generations, when comparing schemes with similar genetic gain and size.     

Effect of non-random mating on genomic and BLUP selection schemes

Background

The risk of long-term unequal contribution of mating pairs to the gene pool is that deleterious recessive genes can be expressed. Such consequences could be alleviated by appropriately designing and optimizing breeding schemes i.e. by improving selection and mating procedures.

Methods

We studied the effect of mating designs, random, minimum coancestry and minimum covariance of ancestral contributions on rate of inbreeding and genetic gain for schemes with different information sources, i.e. sib test or own performance records, different genetic evaluation methods, i.e. BLUP or genomic selection, and different family structures, i.e. factorial or pair-wise.

Results

Results showed that substantial differences in rates of inbreeding due to mating design were present under schemes with a pair-wise family structure, for which minimum coancestry turned out to be more effective to generate lower rates of inbreeding. Specifically, substantial reductions in rates of inbreeding were observed in schemes using sib test records and BLUP evaluation. However, with a factorial family structure, differences in rates of inbreeding due mating designs were minor. Moreover, non-random mating had only a small effect in breeding schemes that used genomic evaluation, regardless of the information source.

Conclusions

It was concluded that minimum coancestry remains an efficient mating design when BLUP is used for genetic evaluation or when the size of the population is small, whereas the effect of non-random mating is smaller in schemes using genomic evaluation.     

Optimal mass selection policies for schemes with overlapping generations and restricted inbreeding

Optimum breeding schemes for maximising the rate of genetic progress with a restriction on the rate of inbreeding (per year or per generation) are investigated for populations with overlapping generations undergoing mass selection. The optimisation is for the numbers of males and females to be selected and for their distribution over age classes. Expected rates of genetic progress (ΔG) are combined with expected rates of inbreeding (ΔF) in a linear objective function (Φ = ΔG - λΔF) which is maximised. A simulated annealing algorithm is used to obtain the solutions. The restriction on inbreeding is achieved by increasing the number of parents and, in small schemes with severe restrictions, by increasing the generation interval. In the latter case the optimum strategy for obtaining the maximum genetic gain is far from truncation selection across age classes. In most situations, the optimum mating ratio is one but the differences in genetic gain obtained with different mating ratios are small. Optimisation of schemes when restricting the rate of inbreeding per generation leads to shorter generation intervals than optimisation when restricting the rate of inbreeding per year.     

Minimization of rate of inbreeding for small populations with overlapping generations

We propose a method that minimizes the rate of inbreeding (delta F) for small unselected populations with overlapping generations and several reproductive age classes. It minimizes the increase in coancestry of parents and optimizes the contribution of each selection candidate. The carrying capacity of the population is limited to a fixed number of animals per year. When survival rate equalled 100%, only animals from the oldest age class were selected, which maximized the number of parents per generation, slowed down the turnover of generations and minimized the increase of coancestry across sublines. However, the population became split into sublines separated by age classes, which substantially increased inbreeding within sublines. Sublines were prevented by a restriction of selecting at least one sire and one dam from the second-oldest age class, which resulted in an L times lower delta F, where L equals the average generation interval of sires and dams. Minimum coancestry mating resulted in lower levels of inbreeding than random mating, but delta F was approximately the same. For schemes where the oldest animals were selected, delta F increased by 18-52% compared with the proposed method.     

Selection against genetic defects in conservation schemes while controlling inbreeding

We studied different genetic models and evaluation systems to select against a genetic disease with additive, recessive or polygenic inheritance in genetic conservation schemes. When using optimum contribution selection with a restriction on the rate of inbreeding (ΔF) to select against a disease allele, selection directly on DNA-genotypes is, as expected, the most efficient strategy. Selection for BLUP or segregation analysis breeding value estimates both need 1–2 generations more to halve the frequency of the disease allele, while these methods do not require knowledge of the disease mutation at the DNA level. BLUP and segregation analysis methods were equally efficient when selecting against a disease with single gene or complex polygene inheritance, i.e. knowledge about the mode of inheritance of the disease was not needed for efficient selection against the disease. Smaller schemes or schemes with a more stringent restriction on ΔF needed more generations to halve the frequency of the disease alleles or the fraction of diseased animals. Optimum contribution selection maintained ΔF at its predefined level, even when selection of females was at random. It is argued that in the investigated small conservation schemes with selection against a genetic defect, control of ΔF is very important.     

Optimization of selection contribution and mate allocations in monoecious tree breeding populations

Background

The combination of optimized contribution dynamic selection and various mating schemes was investigated over seven generations for a typical tree breeding scenario. The allocation of mates was optimized using a simulated annealing algorithm for various object functions including random mating (RM), positive assortative mating (PAM) and minimization of pair-wise coancestry between mates (MCM) all combined with minimization of variance in family size and coancestry. The present study considered two levels of heritability (0.05 and 0.25), two restrictions on relatedness (group coancestry; 1 and 2%) and two maximum permissible numbers of crosses in each generation (100 and 400). The infinitesimal genetic model was used to simulate the genetic architecture of the trait that was the subject of selection. A framework of the long term genetic contribution of ancestors was used to examine the impacts of the mating schemes on population parameters.

Results

MCM schemes produced on average, an increased rate of genetic gain in the breeding population, although the difference between schemes was small but significant after seven generations (up to 7.1% more than obtained with RM). In addition, MCM reduced the level of inbreeding by as much as 37% compared with RM, although the rate of inbreeding was similar after three generations of selection. PAM schemes yielded levels of genetic gain similar to those produced by RM, but the increase in the level of inbreeding was substantial (up to 43%).

Conclusion

The main reason why MCM schemes yielded higher genetic gains was the improvement in managing the long term genetic contribution of founders in the population; this was achieved by connecting unrelated families. In addition, the accumulation of inbreeding was reduced by MCM schemes since the variance in long term genetic contributions of founders was smaller than in the other schemes. Consequently, by combining an MCM scheme with an algorithm that optimizes contributions of the selected individuals, a higher long term response is obtained while reducing the risk within the breeding program.     

The advantage of factorial mating under selection is uncovered by deterministically predicted rates of inbreeding

Rates of inbreeding (ΔF) in selected populations were predicted using the framework of long-term genetic contributions and validated against stochastic simulations. Deterministic predictions decomposed ΔF into four components due to: finite population size, directional selection, covariance of genetic contribution of mates, and deviation of variance of family size from that expected from a Poisson distribution. Factorial (FM) and hierarchical (HM) mating systems were compared under mass and sib-index selection. Prediction errors were in most cases for ΔF less than 10% and for rate of gain less than 5%. ΔF was higher with index than mass selection. ΔF was lower with FM than HM in all cases except random selection. FM reduced the variance of the average breeding value of the mates of an individual. This reduced the impact of the covariance of contributions of mates on ΔF. Thus, contributions of mates were less correlated with FM than HM, causing smaller deviations of converged contributions from the optimum contributions. With index selection, FM also caused a smaller variance of number of offspring selected from each parent. This reduced variance of family size reduced ΔF further. FM increases the flexibility in breeding schemes for achieving the optimum genetic contributions.     

Management of genetic diversity in small farm animal populations

Many local breeds of farm animals have small populations and, consequently, are highly endangered. The correct genetic management of such populations is crucial for their survival. Managing an animal population involves two steps: first, the individuals who will be permitted to leave descendants are to be chosen and the number offspring they will be permitted to produce has to be determined; second, the mating scheme has to be identified. Strategies dealing with the first step are directed towards the maximisation of effective population size and, therefore, act jointly on the reduction in the loss of genetic variation and in the increase of inbreeding. In this paper, the most relevant methods are summarised, including the so-called 'Optimum Contribution' methodology (contributions are proportional to the coancestry of each individual with the rest), which has been shown to be the best. Typically, this method is applied to pedigree information, but molecular marker data can be used to complete or replace the genealogy. When the population is subjected to explicit selection on any trait, the above methodology can be used by balancing the response to selection and the increase in coancestry/inbreeding. Different mating strategies also exist. Some of the mating schemes try to reduce the level of inbreeding in the short term by preventing mating between relatives. Others involve regular (circular) schemes that imply higher levels of inbreeding within populations in the short term, but demonstrate better performance in the long term. In addition, other tools such as cryopreservation and reproductive techniques aid in the management of small populations. In the future, genomic marker panels may replace the pedigree information in measuring the coancestry. The paper also includes the results of several experiments and field studies on the effectiveness and on the consequences of the use of the different strategies.     

Optimised parent selection and minimum inbreeding mating in small aquaculture breeding schemes: a simulation study

The effectiveness of low cost breeding scheme designs for small aquaculture breeding programmes were assessed for their ability to achieve genetic gain while managing inbreeding using stochastic simulation. Individuals with trait data were simulated over 15 generations with selection on a single trait. Combinations of selection methods, mating strategies and genetic evaluation options were evaluated with and without the presence of common environmental effects. An Optimal Parent Selection (OPS) method using semi-definite programming was compared with a truncation selection (TS) method. OPS constrains the rate of inbreeding while maximising genetic gain. For either selection method, mating pairs were assigned from the selected parents by either random mating (RM) or Minimum Inbreeding Mating (MIM), which used integer programming to determine mating pairs. Offspring were simulated for each mating pair with equal numbers of offspring per pair and these offspring were the candidates for selection of parents of the next generation. Inbreeding and genetic gain for each generation were averaged over 25 replicates. Combined OPS and MIM led to a similar level of genetic gain to TS and RM, but inbreeding levels were around 75% lower than TS and RM after 15 generations. Results demonstrate that it would be possible to manage inbreeding over 15 generations within small breeding programmes comprised of 30 to 40 males and 30 to 40 females with the use of OPS and MIM. Selection on breeding values computed using Best Linear Unbiased Prediction (BLUP) with all individuals genotyped to obtain pedigree information resulted in an 11% increase in genetic merit and a 90% increase in the average inbreeding coefficient of progeny after 15 generations compared with selection on raw phenotype. Genetic evaluation strategies using BLUP wherein elite individuals by raw phenotype are genotyped to obtain parentage along with a range of different samples of remaining individuals did not increase genetic progress in comparison to selection on raw phenotype. When common environmental effects on full-sib families were simulated, performance of small breeding scheme designs was little affected. This was because the majority of selection must anyway be applied within family due to inbreeding constraints.     

Prediction of heterosis in crosses between inbred lines of Drosophila melanogaster

Summary The aim of the experiment was to determine if the estimated genetic distance between two populations could be used to predict the amount of heterosis that would occur when they were crossed. Eight lines of known relatedness to each other were produced by eight generations of sib mating and sub-lining. This produced lines that varied in coefficient of coancestry from zero to 0.78. Fourteen reciprocal crosses of these lines were used to measure heterosis for larval viability and adult fecundity. Gene frequencies at six polymorphic enzyme loci were used to estimate the genetic distances between lines, which were then compared with the known degrees of coancestry. The estimated genetic differences were poorly correlated with the known coancestry coefficients (r=0.4), possibly due to the small number of loci typed. Also genetic distances were only about 1/3 of what was expected. Selection acting on blocks of genes linked to the enzyme loci probably prevented the expected increase in homozygosity. Coancestry coefficient was correlated with heterosis (r=0.44–0.71). This level of correlation implied differences in heterosis among parent lines with the same level of coancestry. This variability is expected if a small number of loci explain most of the heterosis. The average level of heterosis was less than expected after eight generations of sib mating. This is most likely due to selection opposing the increase in homozygosity caused by inbreeding. The combination of these two imperfect correlations resulted in no significant correlation between genetic distance estimated from markers and heterosis.     

Improved dairy cattle mating plans at herd level using genomic information

From 2012 to 2018, 223 180 Montbéliarde females were genotyped in France and the number of newly genotyped females increased at a rate of about 33% each year. With female genotyping information, farmers have access to the genomic estimated breeding values of the females in their herd and to their carrier status for genetic defects or major genes segregating in the breed. This information, combined with genomic coancestry, can be used when planning matings in order to maximize the expected on-farm profit of future female offspring. We compared different mating allocation approaches for their capacity to maximize the expected genetic gain while limiting expected progeny inbreeding and the probability to conceive an offspring homozygous for a lethal recessive allele. Three mate allocation strategies (random mating (RAND), sequential mating (gSEQ€) and linear programing mating (gLP€)) were compared on 160 actual Montbéliarde herds using male and female genomic information. Then, we assessed the benefit of using female genomic information by comparing matings planned using only female pedigree information with the equivalent strategy using genomic information. We measured the benefit of adding genomic expected inbreeding and risk of conception of an offspring homozygous for a lethal recessive allele to Net merit in mating plans. The influence of three constraints was tested: by relaxing the constraint on availability of a particular semen type (sexed or conventional) for bulls, by adding an upper limit of 8.5% coancestry between mate pairs or by using a more stringent maximum use of a bull in a herd (5% vs 10%). The use of genomic information instead of pedigree information improved the mate allocation method in terms of progeny expected genetic merit, genetic diversity and risk to conceive an offspring homozygous for a lethal recessive allele. Optimizing mate allocation using linear programming and constraining coancestry to a maximum of 8.5% per mate pair reduced the average coancestry with a small impact on expected Net Merit. In summary, for male and female selection pathways, using genomic information is more efficient than using pedigree information to maximize genetic gain while constraining the expected inbreeding of the progeny and the risk to conceive an offspring homozygous for a lethal recessive allele. This study also underlines the key role of semen type (sexed vs conventional) and the associated constraints on the mate allocation algorithm to maximize genetic gain while maintaining genetic diversity and limiting the risk to conceive an offspring homozygous for a lethal recessive allele.     

Mating strategies with genomic information reduce rates of inbreeding in animal breeding schemes without compromising genetic gain

We tested the hypothesis that mating strategies with genomic information realise lower rates of inbreeding (∆F) than with pedigree information without compromising rates of genetic gain (∆G). We used stochastic simulation to compare ∆F and ∆G realised by two mating strategies with pedigree and genomic information in five breeding schemes. The two mating strategies were minimum-coancestry mating (MC) and minimising the covariance between ancestral genetic contributions (MCAC). We also simulated random mating (RAND) as a reference point. Generations were discrete. Animals were truncation-selected for a single trait that was controlled by 2000 quantitative trait loci, and the trait was observed for all selection candidates before selection. The criterion for selection was genomic-breeding values predicted by a ridge-regression model. Our results showed that MC and MCAC with genomic information realised 6% to 22% less ∆F than MC and MCAC with pedigree information without compromising ∆G across breeding schemes. MC and MCAC realised similar ∆F and ∆G. In turn, MC and MCAC with genomic information realised 28% to 44% less ∆F and up to 14% higher ∆G than RAND. These results indicated that MC and MCAC with genomic information are more effective than with pedigree information in controlling rates of inbreeding. This implies that genomic information should be applied to more than just prediction of breeding values in breeding schemes with truncation selection.     

Optimization of selection for growth in Menz Sheep while minimizing inbreeding depression in fitness traits

The genetic trends in fitness (inbreeding, fertility and survival) of a closed nucleus flock of Menz sheep under selection during ten years for increased body weight were investigated to evaluate the consequences of selection for body weight on fitness. A mate selection tool was used to optimize in retrospect the actual selection and matings conducted over the project period to assess if the observed genetic gains in body weight could have been achieved with a reduced level of inbreeding. In the actual selection, the genetic trends for yearling weight, fertility of ewes and survival of lambs were 0.81 kg, –0.00026% and 0.016% per generation. The average inbreeding coefficient remained zero for the first few generations and then tended to increase over generations. The genetic gains achieved with the optimized retrospective selection and matings were highly comparable with the observed values, the correlation between the average breeding values of lambs born from the actual and optimized matings over the years being 0.99. However, the level of inbreeding with the optimized mate selections remained zero until late in the years of selection. Our results suggest that an optimal selection strategy that considers both genetic merits and coancestry of mates should be adopted to sustain the Menz sheep breeding program.     

Mitigation of inbreeding while preserving genetic gain in genomic breeding programs for outbred plants

Key message

Heuristic genomic inbreeding controls reduce inbreeding in genomic breeding schemes without reducing genetic gain.

Abstract

Genomic selection is increasingly being implemented in plant breeding programs to accelerate genetic gain of economically important traits. However, it may cause significant loss of genetic diversity when compared with traditional schemes using phenotypic selection. We propose heuristic strategies to control the rate of inbreeding in outbred plants, which can be categorised into three types: controls during mate allocation, during selection, and simultaneous selection and mate allocation. The proposed mate allocation measure GminF allocates two or more parents for mating in mating groups that minimise coancestry using a genomic relationship matrix. Two types of relationship-adjusted genomic breeding values for parent selection candidates (\({{\widetilde{\text{GEBV}}}_{\text{P}}}\)) and potential offspring (\({{\widetilde{\text{GEBV}}}_{\text{O}}}\)) are devised to control inbreeding during selection and even enabling simultaneous selection and mate allocation. These strategies were tested in a case study using a simulated perennial ryegrass breeding scheme. As compared to the genomic selection scheme without controls, all proposed strategies could significantly decrease inbreeding while achieving comparable genetic gain. In particular, the scenario using \({{\widetilde{\text{GEBV}}}_{\text{O}}}\) in simultaneous selection and mate allocation reduced inbreeding to one-third of the original genomic selection scheme. The proposed strategies are readily applicable in any outbred plant breeding program.

     

Effect of linkage on the control of inbreeding in selection programmes

Selection and mating methods for controlling inbreeding in selection programmes are based on relationships obtained from pedigrees. The efficiency of these methods has always been tested by studies using genetic models of independent loci. However, under linkage the rate of inbreeding obtained from pedigrees can be different from the probability of identity by descent of genes. We simulated a quantitative trait under artificial selection controlled by a large number of genes spread on genome regions of different sizes. A method to control inbreeding based on minimising the average coancestry of selected individuals with a restriction in the loss of selection response, and a mating procedure to control inbreeding were applied. These methods, that use coancestry relationships, were not effective in controlling inbreeding when the genome sizes were smaller than five morgans or so. However, for larger genome sizes the methods were sufficiently efficient. For very tight linkage, methods that utilise molecular information from markers should be used. We finally discuss the effects of the selection of individual major genes on the neutral variability of adjacent genome regions.     

The effect of fast created inbreeding on litter size and body weights in mice

This study was designed to reveal any differences in effects of fast created versus total inbreeding on reproduction and body weights in mice. A line selected for large litter size for 124 generations (H) and a control line (K) maintained without selection for the same number of generations were crossed (HK) and used as a basis for the experiment. Within the HK cross, full sib, cousin or random mating were practised for two generations in order to create new inbreeding (IB_F) at a fast rate. In the first generation of systematic mating, old inbreeding was regenerated in addition to creation of new inbreeding from the mating design giving total inbreeding (IB_T). The number of pups born alive (NBA) and body weights of the animals were then analysed by a model including both IB_T and IB_F. The IB_T of the dam was in the present study found to reduce the mean NBA with -0.48 (± 0.22) (p < 0.05) pups per 10% increase in the inbreeding coefficient, while the additional effect of IB_F was -0.42 (± 0.27). For the trait NBA per female mated, the effect of IB_T was estimated to be -0.45 (± 0.29) per 10% increase in the inbreeding coefficient and the effect of IB_F was -0.90 (± 0.37) (p < 0.05) pups. In the present study, only small or non-significant effects of IB_F of the dam could be found on sex-ratio and body weights at three and six weeks of age in a population already adjusted for IB_T.     

Genetic management of captive populations: the advantages of circular mating

We performed computer simulations to evaluate the effectiveness of circular mating as a genetic management option for captive populations. As a benchmark, we used the method proposed by Fernández and Caballero according to which parental contributions are set to produce minimum coancestry among the offspring and matings are performed so as to minimize mean pairwise coancestry (referred to as the Gc/mc method). In contrast to other methods, fitness does not vary with population size in the case of circular mating, and can be higher than under random mating. Whether circular mating is an effective method in conserving captive populations depends on the trade-off between different considerations. On the one hand, circular mating shows the highest allelic diversity and the lowest mean pairwise coancestry for all population sizes. It also shows a relatively higher efficiency of purging deleterious alleles. More importantly, circular mating can significantly increase the success probability of populations released to the wild relative to the Gc/mc method. On the other hand, circular mating has the drawback of showing high inbreeding rates and low fitness in early generations, which can result to an increase in the extinction probability of the captive populations. However, this increase is slight unless population size and litter size are both very low. Overall, if the slight increase in extinction probability can be tolerated then circular mating fulfils the primary goals of a captive breeding program, i.e., it maintains high levels of genetic diversity and increases the success probability of reintroduced populations.     

Effects of mating system in Japanese quail

Summary A 17-generation selection experiment was conducted to study direct and correlated responses to mass selection under a mating system with alternating generations of full-sib inbreeding and wide outbreeding (population I) as compared with a mass selected, randomly mated population (population II). The selection criterion was an index of total egg mass to 78 days divided by adult female body weight. Estimates of heritabilities and genetic correlations are reported. Estimated heritabilities for the index were 0.38±0.04 and 0.29±0.05 in population I and II, respectively. Realized heritabilites were 0.10±0.05 and 0.12±0.03. For most traits studied the mean phenotypic values in the cyclic mated population decreased for inbred generations. Increased inbreeding levels also caused outbred generation means of population I to decrease through the first six or seven generations. After this period of adaptation to inbreeding selection response was positive for the index and positively correlated traits. Total response to selection under the cyclic inbred-outbred mating system did not exceed selection response made under random mating. However, the rate of response in the cyclically mated population exceeded that in the randomly mated population in later generations when the cyclically mated population had apparently adapted to inbreeding.Published with approval of the Director of the Montana Agricultural Experiment Station, Journal Series No. 1221     

Slow Recovery from Inbreeding Depression Generated by the Complex Genetic Architecture of Segregating Deleterious Mutations

The deleterious effects of inbreeding have been of extreme importance to evolutionary biology, but it has been difficult to characterize the complex interactions between genetic constraints and selection that lead to fitness loss and recovery after inbreeding. Haploid organisms and selfing organisms like the nematode Caenorhabditis elegans are capable of rapid recovery from the fixation of novel deleterious mutation; however, the potential for recovery and genomic consequences of inbreeding in diploid, outcrossing organisms are not well understood. We sought to answer two questions: 1) Can a diploid, outcrossing population recover from inbreeding via standing genetic variation and new mutation? and 2) How does allelic diversity change during recovery? We inbred C. remanei, an outcrossing relative of C. elegans, through brother-sister mating for 30 generations followed by recovery at large population size. Inbreeding reduced fitness but, surprisingly, recovery from inbreeding at large populations sizes generated only very moderate fitness recovery after 300 generations. We found that 65% of ancestral single nucleotide polymorphisms (SNPs) were fixed in the inbred population, far fewer than the theoretical expectation of ∼99%. Under recovery, 36 SNPs across 30 genes involved in alimentary, muscular, nervous, and reproductive systems changed reproducibly across replicates, indicating that strong selection for fitness recovery does exist. Our results indicate that recovery from inbreeding depression via standing genetic variation and mutation is likely to be constrained by the large number of segregating deleterious variants present in natural populations, limiting the capacity for recovery of small populations.