Application of Arthrospira (Spirulina) platensis biomass for silver removal from aqueous solutions

The cyanobacterium Arthrospira (Spirulina) platensis was used to study the process of silver biosorption. Effects of various parameters such as contact time, dosage of biosorbent, initial pH, temperature, and initial concentration of Ag(I) were investigated for a batch adsorption system. The optimal biosorption conditions were determined as pH 5.0, biosorbent dosage of 0.4 g, and initial silver concentration of 30 mg/L. Equilibrium adsorption data were analyzed by the Langmuir and Freundlich models – however, the Freundlich model provided a better fit to the experimental data. The kinetic data fit the pseudo-second-order model well, with a correlation coefficient of 0.99. The analysis of thermodynamic parameters (ΔG°, ΔH° and ΔS°) revealed that the adsorption process of silver ion by spirulina biomass was exothermic and spontaneous (ΔG° < 0), and exothermic (ΔH° < 0) process. The biosorption capacity of biomass A. platensis serves as a basis for the development of green technology for environmental remediation.     

Arthrospira (Spirulina) platensis: An effective biosorbent for nutrients

Arthrospira (Spirulina) platensis was tested for biosorption properties. Preliminary experiments concerning biosorption kinetics were performed on Cr(III) ions. Equilibrium of biosorption was tested for Cr(III), Mn(II) and Mg(II) ions, since these elements are crucial for animals with metabolic disorders. In our study, Spirulina was proposed as a feed additive for animals suffering from diseases characterized by insulin dysregulation, abnormal adipose distribution and a high risk for laminitis. Maximum biosorption capacity of A. platensis, determined from Langmuir equation, was 45.2 for Cr(III), 44.3 for Mn(II) and 42.0 mg/g for Mg(II) ions. Biosorption of Mg(II) ions by microalga has never been studied so far. Finally, the raw and enriched microalgal biomass was examined by ICP-OES to determine its multielamental analysis before and after biosorption, FTIR to indicate functional groups that participated in biosorption and SEM-EDX to illustrate the binding of metal ions on the surface of algal biomass. ICP-OES showed that the content of elements significantly increased in the enriched A. platensis. FTIR spectroscopy evidenced that biosorption of metal ions was mainly due to carboxylate groups present on the microalgal cell wall. SEM analysis clearly showed that biosorption occurred. Arthrospira platensis turned out to be a good biosorbent of metal ions.     

Repeated fed-batch cultivation of Arthrospira (Spirulina) platensis using urea as nitrogen source

Arthrospira (Spirulina) platensis (Nordstedt) Gomont was autotrophically cultivated for biomass production in repeated fed-batch process using urea as nitrogen source, with the aim of making large-scale production easier, increasing cell productivity and then reducing the production costs. It was investigated the influence of the ratio of renewed volume to total volume (R), the urea feeding time (t_f) and the number of successive repeated fed-batch cycles on the maximum cell concentration (X_m), cell productivity (P_x), nitrogen-to-cell conversion yield (Y_x/n), maximum specific growth rate (μ_m) and protein content of dry biomass. The experimental results demonstrated that R = 0.80 and t_f = 6 d were the best cultivation conditions, being able to simultaneously ensure, throughout the three fed-batch cycles, the highest average values of three of the five responses (X_m = 2101 ± 113 mg L^?1, P_x = 219 ± 13 mg L^?1 d^?1 and Y_x/n = 10.3 ± 0.8 g g^?1).     

Effects of phosphorus concentration and light intensity on the biomass composition of Arthrospira (Spirulina) platensis

This paper presents the effects of various phosphorus concentrations (10, 50, 250 and 500 mg l(-1) K(2)HPO(4)) on the biomass production and composition of Arthrospira (Spirulina) platensis in relation to light intensity (24, 42 and 60 μE m(-2) s(-1)). The maximum biomass production was 3,592 ± 392 mg l(-1) and this was observed in 250 mg l(-1) K(2)HPO(4) at 60 μE m(-2) s(-1) light intensity after 32 days of cultivation. A maximum specific growth rate (μ(max)) of 0.55 d(-1) was obtained in 500 mg l(-1) K(2)HPO(4) at 60 μE m(-2) s(-1). The protein, lipid and chlorophyll contents of the biomass varied from 33.59 to 60.57 %, 5.34 to 13.33 % and 0.78 to 2.00 %, respectively. The most significant finding was that phosphorus limitation (10 mg l(-1) K(2)HPO(4)) caused a drastic increase of the carbohydrate content (59.64 %). The effect of phosphorus limitation on the carbohydrate content was independent of the light intensity. The accumulated carbohydrates are proposed to be used as substrate for biofuel generation via one of the appropriate biomass energy conversion technologies. Also, it was observed that phosphorus removal is a function of biomass density, phosphorus concentration and light intensity.     

Polyhydroxyalkanoates and pigments coproduction by Arthrospira (Spirulina) platensis cultivated in crude glycerol

Journal of Applied Phycology - Valorization of industrial waste as an alternative carbon source for microalgae mixotrophic cultivation and co-production of high-value compounds are strategies to...     

Simultaneous use of urea and potassium nitrate for Arthrospira (Spirulina) platensis cultivation

Urea has been considered as a promising alternative nitrogen source for the cultivation of Arthrospira platensis if it is possible to avoid ammonia toxicity; however, this procedure can lead to periods of nitrogen shortage. This study shows that the addition of potassium nitrate, which acts as a nitrogen reservoir, to cultivations carried out with urea in a fed-batch process can increase the maximum cell concentration (X(m) ) and also cell productivity (P(X) ). Using response surface methodology, the model indicates that the estimated optimum X(m) can be achieved with 17.3 mM potassium nitrate and 8.9 mM urea. Under this condition an X(m) of 6077 ± 199 mg/L and a P(X) of 341.5 ± 19.1 mg L(-1) day(-1) were obtained.     

Factors indicating culture status during cultivation of Spirulina (Arthrospira) platensis

Factors indicating culture status of two Spirulina platensis strains were monitored in a batch mode cultivation for 36 days. Changing mode in all factors showed a common turning point, indicating shift of cell or culture status. Mean biomass productivity was highly sustained until day 22, chlorophyll a concentration peaked on day 22, pH value was >12 on day 22, coil number was abruptly shortened on day 22, and floating activity was sustained at greater than 79% after day 22, indicating that day 22 is a criterion reflecting phase-transfer in cell physiology in a batch culture system. Many of these changes may have been caused by increased pH, suggesting that pH control is essential for mass production of S. platensis. Fluctuations in floating activity were likely induced by the number of cellular gas vacuoles. Consequently, coil number per trichome and floating activity of S. platensis could readily act as simple indicators for determination of culture status or harvesting time of cells.     

Spirulina platensis (Arthrospira): Physiology,Cell Biology and Biotechnologym,edited by Avigad Vonshak

Journal of Applied Phycology -     

Kinetic models for phycocyanin production by high cell density mixotrophic culture of the microalga Spirulina platensis

Phycocyanin production by high cell density cultivation of Spirulina platensis in batch and fed-batch modes in 3.7-L bioreactors with a programmed stepwise increase in light intensity program was investigated. The results showed that the cell density in fed-batch culture (10.2 g L⁻¹) was 4.29-fold that in batch culture (2.38 g L⁻¹), and the total phycocyanin production in the fed-batch culture (0.795 g L⁻¹) was 3.05-fold that in the batch culture (0.261 g L⁻¹). An unstructured kinetic model to describe the microalga culture system including cell growth, phycocyanin formation, as well as glucose consumption was proposed. The data fitted the models well (r ² > 0.99). Furthermore, based on the kinetic models, the potential effects of light limitation and photoinhibition on cell growth and phycocyanin formation can be examined in depth. The models demonstrated that the optimal light intensity for mixotrophic growth of Spirulina platensis in batch or fed-batch cultures using a 3.7-L bioreactor was 80160 μE m⁻² s⁻¹, and the stepwise increase in light intensity can be replaced by a constant light intensity mode. Received 28 July 1998/ Accepted in revised form 8 October 1998     

Enhanced biomass and gamma-linolenic acid production of mutant strain Arthrospira platensis

A mutant of Arthrospira platensis PCC 9108, strain M9108, obtained by mutagenesis with UV treatment, was able to mixotrophically grow in an SOT medium containing 40 g of glucose/l. The biomass and specific growth rate of strain M9108 (4.10 g/l and 0.70/d) were 1.9-fold and 1.4-fold higher, respectively, than those of the wild type (2.21 g/l and 0.58/d) under mixotrophic culture condition. In addition, when compared with the wild type, the content of gamma- linolenic acid (GLA) in the mutant was increased when glucose concentration was increased. Compared with the wild type, the GLA content of the mutant was 2-fold higher in autotrophic culture and about 3-fold higher in mixotrophic culture. Thus, the mutant appears to possess more efficient facility to assimilate and metabolize glucose and to produce more GLA than its wild-type strain.     

First description of a cyanophage infecting the cyanobacterium Arthrospira platensis (Spirulina)

Cyanobacteria constitute a versatile group of photosynthetic bacteria of immense commercial and ecological importance. Some species of this group are cultivated and sold as food because of their high nutritional value. This is typically the case for Arthrospira platensis. We describe, for the first time, a virus infecting this economically important filamentous cyanobacterium isolated from culture pools located in the South of France. This virus could be observed and discriminated easily from other particles with flow cytometry. Based on morphology and molecular investigation, it was proposed that the virus belongs to the cyanopodovirus group with a capsid and short tail of about 120 and 20 nm, respectively. Finally, the virus appeared to be highly specific (very narrow host range) to A. platensis.     

Growth inhibition of the cyanobacterium Spirulina (Arthrospira) platensis by 1.7 MHz ultrasonic irradiation

Ultrasonic waves of high frequency (1.7 MHz) and low intensity (0.6 W cm^–2) were employed to prevent cyanobacterial cells from growing fast and the effects of this growth inhibition were investigated. At least five minutes of ultrasonic irradiation was essential for effective inhibition. The growth rate of irradiated cells was reduced to 38.9% of the control during short-term culture. Longer exposure did not significantly enhance the inhibition. For a particular level of energy input, distributed ultrasonic exposure (more short intermittent exposures) was more effective in inhibiting growth than fewer, but longer exposures. For instance, the final biomass decreased to 30.1% of the control after ultrasonic irradiation for 4 minutes every 3 days, whereas it only decreased to 60% of the control with exposure for 12 minutes every 11 days. It is suggested that distributed ultrasonic irradiation is a practical method to prevent cyanobacterial cells from fast growth. A possible explanation for the inhibition is discussed in relation to cell structure, the absorption spectrum of intact cells, chlorophyll level and oxygen evolution.     

Protein,phycocyanin, and polysaccharide production by Arthrospira platensis grown with LED light in annular photobioreactors

Journal of Applied Phycology - Arthrospira platensis is a cyanobacterium known for its widespread use as nutraceutical and food additive. Besides a high protein content, this microorganism is also...     

Photosynthetic and respiratory electron transport in the alkaliphilic cyanobacterium Arthrospira (Spirulina) platensis

Photosynthetic and respiratory electron transport and their interplay with ion transport have been studied in Arthrospira platensis, a filamentous alkaliphilic cyanobacterium living in hypersaline lakes. As typical for alkaliphiles, A. platensis apparently does not maintain an outward positive pH gradient at its plasma membrane. Accordingly, sodium extrusion occurs via an ATP-dependent primary sodium pump, in contrast to the Na⁺/H⁺ antiport in most cyanobacteria. A. platensis is strongly dependent on sodium/bicarbonate symport for the uptake of inorganic carbon. Sodium extrusion in the presence of the Photosystem II inhibitor diuron indicates that a significant amount of ATP is supplied by cyclic electron transport around Photosystem I, the content of which in A. platensis is exceptionally high. Plastoquinol is oxidized by two parallel pathways, via the cytochrome b ₆ f complex and a putative cytochrome bd complex, both of which are active in the light and in the dark. This revised version was published online in August 2006 with corrections to the Cover Date.     

Zinc removal from model solution and wastewater by Arthrospira (Spirulina) Platensis biomass

The biosorption of zinc from model solution as well as wastewater by Arthrospira (Spirulina) platensis biomass was studied. Adsorption capacity of the biosorbent was investigated as a function of contact time between adsorbent and zinc, the initial metals and sorbent concentration, pH value, and temperature. The ability of Arthrospira biomass for zinc biosorption exhibited a maximum at the pH range 4–8. Equilibrium data fitted well with the Langmuir model as well as the Freundlich model with maximum adsorption capacity of 7.1 mg/g. The pseudo second-order model was found to correlate well with the experimental data. Different thermodynamic parameters, ΔG°, ΔH° and ΔS° were evaluated and it has been found that the sorption was feasible, spontaneous, and endothermic in nature. The process of zinc removal from industrial effluent was studied at different time of sorbat–sorbent interaction and different sorbent dosage. Maximum zinc removal (83%) was obtained at sorbent concentration 60 g/L during 1-h experiment. The results indicate that Arthrospira platensis biomass could be effectively used for zinc removal from industrial effluents.     

Different nitrogen sources and growth responses of Spirulina platensis in microenvironments

Spirulina platensis was cultivated, in comparative studies, using several sources of nitrogen. The standard source used (sodium nitrate) was the same as that used in the synthetic medium Zarrouk, whereas the alternative nitrogen sources consisted of ammonium nitrate, urea, ammonium chloride, ammonium sulphate or acid ammonium phosphate. The initial nitrogen concentrations tested were 0.01, 0.03 and 0.05 M in an aerated photobioreactor at 30 °C, with an illuminance of 1900 lux, and 12 h-light/12 h-dark photoperiod over a period of 672 h. Maximum biomass was produced in medium containing sodium nitrate (0.01–0.03–0.05 M), followed by ammonium nitrate (0.01 M) and urea (0.01 M). The final biomass concentrations were 1.992 g l^–1 (0.03 M sodium nitrate), 1.628 g l^–1 (0.05 M sodium nitrate), 1.559 g l^–1 (0.01 M sodium nitrate), 0.993 g l^–1 (0.01 M ammonium nitrate) and 0.910 g l^–1 (0.01 M urea). This suggested that it is possible to utilize nitrogen sources other than sodium nitrate for growing S. platensis, in order to decrease the production costs of scaled up projects.     

鄂尔多斯高原碱湖的钝顶螺旋藻光合生理研究

鄂尔多斯高原碱湖的钝顶螺旋藻光合色素含量高低排列为藻胆素>叶绿素a>类胡萝卜素;各色素具有特定的吸收光谱,活体吸收光谱体现出了各色素的吸收;各色素的荧光发射主峰波长约长于活体的13￣35nm,相对荧光强度约是活体的11倍。其光合速率的日变化呈单峰曲线,13:00时达到最高;光补偿点为28￣30μmol.m-2.s-1;光饱和点为220￣235μmol.m-2.s-1;光合作用的最适温度为35℃。呼吸速率日变化随温度的升高呈缓慢上升的趋势。     

Purification and characterization of phycoferritin from the blue-green alga, Arthrospira (Spirulina) platensis

Phycoferritin from the nutritionally important blue-green alga Arthrospira platensis has been isolated, by application of conventional biochemical techniques. The molecular mass, yield, iron and total neutral carbohydrate contents of the purified protein were 470 kDa, 0.044 mg g⁻¹ of Arthrospira, 1.4 and 20%, respectively. The iron content was much lower when compared to bacterial and mammalian ferritins. The P: Fe ratio of Arthrospira phycoferritin was 1: 3.5, a value akin to bacterioferritins. Native gel-electrophoresis revealed the presence of isoforms. Subunit analysis by SDS-PAGE and Western blotting showed a protein subunit with an apparent molecular mass of 18 kDa. Oligomeric forms of the protein subunit were also present. The phycoferritin exhibited cross-reactivity with anti-pea seed ferritin suggesting phylogenetic relationship with that of higher plants. Carbohydrate analysis of phycoferritin by GC-MS revealed the presence of sugars such as galactose, glucose and mannose similar to that of mammalian ferritins. Interestingly, the analysis also revealed sugars such as rhamnose, xylose and talose, which has not been reported in the structure of ferritins. Except for very low histidine content in phycoferritin, the rest of the amino acid composition resembled to ferritins of other species. UV-visible spectral analysis of the phycoferritin revealed the presence of haem groups, a property characteristic of bacterioferritins. The fluorescence intensity of phycoferritin was higher than equine spleen ferritin. Circular dichroic spectra revealed a lower degree of helicity.