Long-Term Chemiluminescent Signal Is Produced in the Course of Luminol Peroxidation Catalyzed by Peroxidase Isolated from Leaves of African Oil Palm Tree

Optimal conditions were found for the oxidation of luminol by hydrogen peroxide in the presence of peroxidase isolated from leaves of the African oil palm tree Elaeis guineensis (AOPTP). The pH range for maximal chemiluminescence intensity (8.3-8.6) is similar for AOPTP, horseradish, and Arthromyces ramosus peroxidases and slightly different from that for tobacco peroxidase (9.3). Increasing the buffer concentration decreases the chemiluminescence intensity. As in the case of other anionic peroxidases, the catalytic efficiency of AOPTP does not depend on the presence of enhancers (4-iodophenol and 4-hydroxycinnamic acid) in the reaction medium. The detectable limit of AOPTP assayed by luminol peroxidation is 2·10^–12 M. The long-term chemiluminescence signal produced during AOPTP-dependent luminol peroxidation is a characteristic feature of the African oil palm enzyme. This feature in combination with its very high stability suggests that AOPTP will be a promising tool in analytical practice.     

Luminol oxidation by hydrogen peroxide with chemiluminescent signal formation catalyzed by peroxygenase from the fungus Agrocybe aegerita V.Brig.

Conditions of luminol oxidation by hydrogen peroxide in the presence of peroxygenase from the mushroom Agrocybe aegerita V.Brig. have been optimized. The pH value (8.8) at which fungal peroxygenase produces a maximum chemiluminescent signal has been shown to be similar to the pH optimum value of horseradish peroxidase. Luminescence intensity changed when the concentration of Tris-buffer was varied; maximum intensity of chemiluminescence was observed in 40 mM solution. It has been shown that enhancer (p-iodophenol) addition to the substrate mixture containing A. aegerita peroxygenase exerted almost no influence on the intensity of the chemiluminescent signal, similarly to soybean, palm, and sweet potato peroxidases. Detection limit of the enzyme in the reaction of luminol oxidation by hydrogen peroxide was 0.8 pM. High stability combined with high sensitivity make this enzyme a promising analytical reagent.     

Enhanced chemiluminescence: A sensitive analytical system for detection of sweet potato peroxidase

3-(10'-Phenothiazinyl)propane-1-sulfonate (SPTZ) was shown to be a potent enhancer of anionic sweet potato peroxidase (aSPP)-induced chemiluminescence. The optimal conditions for aSPP-catalyzed oxidation of luminol were investigated by varying the concentrations of luminol, hydrogen peroxide, Tris, and SPTZ as well as the pH values of the reaction mixture. Addition of 4-morpholinopyridine (MORP) to the reaction mixture markedly increased the light intensity. Using SPTZ and MORP together enhanced the effect 265 times. The lower detection limit (LDL) of SPP was 0.09 pM, approximately in 10 times lower than that for the cationic isozyme c of horseradish peroxidase/4-iodophenol system. It was shown that aSPP in the presence of SPTZ produced a longer lasting chemiluminescent signal.     

Long‐term chemiluminescence signal is produced in the course of luminol oxidation catalyzed by enhancer‐independent peroxidase purified from Jatropha curcas leaves

Isoenzyme c of horseradish peroxidase (HRP‐C) is widely used in enzyme immunoassay combined with chemiluminescence (CL) detection. For this application, HRP‐C activity measurement is usually based on luminol oxidation in the presence of hydrogen peroxide (H₂O₂). However, this catalysis reaction was enhancer dependent. In this study, we demonstrated that Jatropha curcas peroxidase (JcGP1) showed high efficiency in catalyzing luminol oxidation in the presence of H₂O₂. Compared with HRP‐C, the JcGP1‐induced reaction was enhancer independent, which made the enzyme‐linked immunosorbent assay (ELISA) simpler. In addition, the JcGP1 catalyzed reaction showed a long‐term stable CL signal. We optimized the conditions for JcGP1 catalysis and determined the favorable conditions as follows: 50 mM Tris buffer (pH 8.2) containing 10 mM H₂O₂, 14 mM luminol and 0.75 M NaCl. The optimum catalysis temperature was 30°C. The detection limit of JcGP1 under optimum condition was 0.2 pM. Long‐term stable CL signal combined with enhancer‐independent property indicated that JcGP1 might be a valuable candidate peroxidase for clinical diagnosis and enzyme immunoassay with CL detection. Copyright © 2014 John Wiley & Sons, Ltd.     

Luminol oxidation catalyzed by royal palm leaf peroxidase

We optimized the conditions for oxidation of luminol by hydrogen peroxide in the presence of peroxidase (EC 1.11.1.7) from royal palm leaves (Roystonea regia). The pH range (8.3–8.6) corresponding to maximum chemiluminescence was similar for palm tree peroxidase and horseradish peroxidase. Variations in the concentration of the Tris buffer were accompanied by changes in chemiluminescence. Note that maximum chemiluminescence was observed in the 30 mM Tris solution. The detection limit of the enzyme assay during luminol oxidation by hydrogen peroxide was 1 pM. The specific feature of palm tree peroxidase was the generation of a long-term chemiluminescent signal. In combination with the data on the high stability of palm tree peroxidase, our results indicate that this enzyme is promising for its use in analytical studies.     

Biocatalytic properties of recombinant tobacco peroxidase in chemiluminescent reaction

The wild-type anionic tobacco peroxidase and its Glu141Phe mutant have been expressed in Escherichia coli, and reactivated to yield active enzymes. A Glu141Phe substitution was made with the tobacco anionic peroxidase (TOP) to mimic neutral plant peroxidases, such as horseradish peroxidase (HRP). Both recombinant forms of tobacco peroxidase show extremely high activity in luminol oxidation with hydrogen peroxide, and thus, preserve the unique property of the native tobacco peroxidase, a superior chemiluminescent reagent. The chemiluminescent signal intensity for both recombinant forms of TOP is orders of magnitude higher than that for wild-type recombinant HRP. The substitution slightly increases TOP activity and stability in the reaction course, but has almost no effect on the optimal parameters of the reaction (pH, luminol and hydrogen peroxide concentrations) and calibration plot. Comparison of substrate specificity profiles for recombinant TOP and HRP demonstrates that Glu141 has no principal effect on the enzyme activity. It is not the presence of the negative charge at the haem edge, but the high redox potential of TOP Compounds I and II that provides high activity towards aromatic amines and aminophenols, and luminol in particular.     

Oxidation of luminol with peroxidase from royal palm leaves

We optimized the conditions for luminol oxidation by hydrogen peroxide in the presence of peroxidase (EC 1.11.1.7) from royal palm leaves (Roystonea regia). The pH range (8.3-8.6) corresponding to maximum chemiluminescence was similar for palm tree peroxidase and horseradish peroxidase. Variations in the concentration of the Tris buffer were accompanied by changes in chemiluminescence. Note that maximum chemiluminescence was observed in the 30 mM solution. The detection limit of the enzyme assay during luminol oxidation by hydrogen peroxide was 1 pM. The specific feature of palm tree peroxidase was the generation of a long-term chemiluminescent signal. In combination with the data on the high stability of palm tree peroxidase, our results indicate that this enzyme is promising for its use in analytical studies.     

Biocatalytic properties of recombinant tobacco peroxidase in chemiluminescent reaction

The wild-type anionic tobacco peroxidase and its Glu141Phe mutant have been expressed in Escherichia coli, and reactivated to yield active enzymes. A Glu141Phe substitution was made with the tobacco anionic peroxidase (TOP) to mimic neutral plant peroxidases, such as horseradish peroxidase (HRP). Both recombinant forms of tobacco peroxidase show extremely high activity in luminol oxidation with hydrogen peroxide, and thus, preserve the unique property of the native tobacco peroxidase, a superior chemiluminescent reagent. The chemiluminescent signal intensity for both recombinant forms of TOP is orders of magnitude higher than that for wild-type recombinant HRP. The substitution slightly increases TOP activity and stability in the reaction course, but has almost no effect on the optimal parameters of the reaction (pH, luminol and hydrogen peroxide concentrations) and calibration plot. Comparison of substrate specificity profiles for recombinant TOP and HRP demonstrates that Glu141 has no principal effect on the enzyme activity. It is not the presence of the negative charge at the haem edge, but the high redox potential of TOP Compounds I and II that provides high activity towards aromatic amines and aminophenols, and luminol in particular.     

A comparison of chemical systems for luminometric determination of antioxidant capacity towards individual reactive oxygen species.

The aim of the study was to investigate the reactive oxygen species (ROS) production in the hypoxanthine-xanthinoxidase (HX-XO), hydrogen peroxide-ferrous sulphate (H2O2-FeSO4) and hydrogen peroxide (H2O2) systems by using various concentrations of ROS scavengers, such as superoxide dismutase (SOD), dimethylthiourea (DMTU) or catalase (CAT). Luminol (0.8 mmol/L) was dissolved in a borate buffer, pH 9.0, and was used as a luminophor in the chemiluminescence (CL) measurements. In the HX-XO system SOD, CAT and DMTU deepened the CL signal, whereas in the H2O2-FeSO4 system, only CAT and DMTU deepened the CL signal, and in the H2O2 system SOD and CAT increased and DMTU deepened the CL signal. Electron spin resonance (ESR) measurements were performed only in the H2O2-FeSO4 system. 5,5-dimethyl-pyrroline-N-oxide (DMPO) was used as a spin trap. According to typical ESR spectra, .OH was produced in this chemical system. It can be concluded that the chemical systems do not produce single reactive oxygen species but a mixture of them.     

Natural catalyst for luminol chemiluminescence: application to validate peroxide levels in commercial hair dyes

Here, we report a hydrothermally treated green leaves (Moringa oleifera) extract exploited as an efficient and highly sensitive catalyst to catalyze the chemiluminescence (CL) reaction of luminol. In the absence of enhancer, this green and hydrothermally treated catalyst was found to significantly enhance the CL intensity ~3.5-fold compared with the traditionally used K₃Fe(CN)₆ catalyst. The structure and surface morphology of the catalyst was elucidated using X-ray photoelectron spectroscopy, scanning electron microscopy, X-ray diffraction, and Raman spectroscopy. The synergistic effect of the catalyst in the CL reaction was systematically investigated in the presence of hydrogen peroxide using ultraviolet–visible and CL spectroscopy. Studies showed that the sensitivity of the catalyst could be amplified by adjusting several parameters such as pH of the medium and concentrations of the base and luminol. The sensitivity of the novel-type catalyst was examined through the validation of hydrogen peroxide levels in commercial hair dye samples. Markedly, the catalyst displayed ultrasensitivity to hydrogen peroxide as the limit of detection of hydrogen peroxide using this catalyst was determined to be 0.02 μM under optimized conditions. In general, the proposed inexpensive, ecofriendly, and nontoxic catalyst could enable the determination of hydrogen peroxide for diverse analytical applications.     

Chemiluminescence determination of pharmacologically active compounds by capillary electrophoresis.

A simple and rapid capillary electrophoresis with direct chemiluminescence method has been developed for the determination of five natural pharmacologically active compounds including rutin, protocatechuic aldehyde, chlorogenic acid, luteolin and protocatechuic acid. The luminol as a component of the separation electrolyte buffer was introduced at the head of the separation capillary. The separation of five compounds was carried out in a fused-silica capillary with 15.0 mmol/L tetraborate, 1.0 mmol/L SDS and 0.42 mmol/L luminol (pH 8.5). The analytes was determined by enhancing the chemiluminescence of luminol with 0.13 mmol/L K3Fe(CN)6 in 0.05 mol/L NaOH, which was introduced at the post-column stage. The voltage applied was 16 kV. Under the optimum conditions, the analytes were separated within 10 min. The excellent linearity was obtained over two to three orders of magnitude with a detection limit (signal:noise = 3) of 0.012-0.055 micromol/L for all five analytes. The method was successfully used in the analysis of pharmaceutical and biological samples, and the assay results were satisfactory.     

Chemiluminescence of daphnia cultivating medium and optimization of conditions for its determination

The article deals with the optimization of conditions for the chemiluminescence determination. The Daphnia habitat was shown to have no spontaneous chemiluminescence. This was revealed using hydrogen peroxide and luminol, the optimal concentrations of which were 23 and 1.6 x 10(-2) mmol/L. p-Iodphenol at low concentrations (4 x 10(-5)-2 x 10(-3) mmol/L) did not render its effect chemiluminescence signal while at high concentrations (4 x 10(-2) mmol/L) an inhibition of chemiluminescence was observed. To obtain the needed intensity of chemiluminescence no more than 5 daphnia persons is required to incubate in volume of 10 mL of sample for analyzing. The intensity of chemiluminescence of daphnia cultivating medium and the sensitivity of this organism to potassium chromate increased at the temperature increasing from 24 to 32 degrees C. Daphnia cultivating medium can be preserved in refrigerator for several hours without lost of chemiluminescence signal.     

Non‐competitive immunoassay for luteinizing hormone in human serum using capillary electrophoresis with chemiluminescence detection

A non‐competitive immunoassay based on capillary electrophoresis (CE) with chemiluminescence (CL) detection has been developed for the determination of luteinizing hormone (LH) in human serum. The work involved the development of separation and CL conditions, allowing for routine analysis of serum samples. In this study, horseradish peroxidase (HRP)‐labelled monoclonal anti‐LH can catalyse the luminol–hydrogen peroxide reaction. The determined LH can react with excessive amount of HRP‐labelled anti‐LH. Within 14 min, free enzyme conjugate and immune complex could be separated in alkaline borate buffer by means of a high voltage (15 kV). To improve sensitivity, a series of measures were adopted, including the choice of para‐iodophenol as a CL enhancer, unique design in detect window. Under the optimal conditions, the calibration curve for LH was established in the concentration range 1–200 mIU/mL and the detection limit was 0.08 mIU/mL. Compared with ELISA, this method decreased the detection limit by about 12 times, and it has been successfully employed in the determination of LH in human serum. Copyright © 2007 John Wiley & Sons, Ltd.     

Chemiluminescence flow biosensor for glucose using Mg-Al carbonate layered double hydroxides as catalysts and buffer solutions

In this work, serving as supports in immobilizing luminol reagent, catalysts of luminol chemiluminescence (CL), and buffer solutions for the CL reaction, Mg-Al-CO(3) layered double hydroxides (LDHs) were found to trigger luminol CL in weak acid solutions (pH 5.8). The silica sol-gel with glucose oxidase and horseradish peroxidase was immobilized in the first half of the inside surface of a clear quartz tube, and luminol-hybrid Mg-Al-CO(3) LDHs were packed in the second half. Therefore, a novel CL flow-through biosensor for glucose was constructed in weak acid solutions. The CL intensity was linear with glucose concentration in the range of 0.005-1.0mM, and the detection limit for glucose (S/N=3) was 0.1μM. The proposed biosensor exhibited excellent stability, high reproducibility and high selectivity for the determination of glucose and has been successfully applied to determine glucose in human plasma samples with satisfactory results. The success of this work has broken the bottleneck of the pH incompatibility between luminol CL and enzyme activity.     

Oxidation and chemiluminescence of catechol by hydrogen peroxide in the presence of Co(II) ions and CTAB micelles.

The oxidation of catechol in neutral and slightly alkaline aqueous solutions (pH 7-9.6) by excess hydrogen peroxide (0.002-0.09 mol/L) in the presence of Co(II) (2.10(-7)-2.10(-5) mol/L) is accompanied by abrupt formation of red purple colouration, which is subsequently decolourized within 1 h. The electron spectra of the reaction mixture are characterized by a broad band covering the whole visible range (400-700 nm), with maximum at 485 nm. The reaction is initiated by catechol oxidation to its semiquinone radical and further to 1,2-benzoquinone. By nucleophilic addition of hydrogen peroxide into the p-position of benzoquinone C=O groups, hydroperoxide intermediates are formed, which decompose to hydroxylated 1,4-benzoquinones. It was confirmed by MS spectroscopy that monohydroxy-, dihydroxy- and tetrahydroxy-1,4-benzoquinone are formed as intermediate products. As final products of catechol decomposition, muconic acid, its hydroxy- and dihydroxy-derivatives and crotonic acid were identified. In the micellar environment of hexadecyltrimethylammonium bromide the decomposition rate of catechol is three times faster, due to micellar catalysis, and is accompanied by chemiluminescence (CL) emission, with maxima at 500 and 640 nm and a quantum yield of 1 x 10(-4). The CL of catechol can be further sensitized by a factor of 8 (maximum) with the aid of intramicellar energy transfer to fluorescein.     

A highly sensitive and temporal visualization system for gaseous ethanol with chemiluminescence enhancer

A two‐dimensional gaseous ethanol visualization system has been developed and demonstrated using a horseradish peroxidase–luminol–hydrogen peroxide system with high‐purity luminol solution and a chemiluminescence (CL) enhancer. This system measures ethanol concentrations as intensities of CL via the luminol reaction. CL was emitted when the gaseous ethanol was injected onto an enzyme‐immobilized membrane, which was employed as a screen for two‐dimensional gas visualization. The average intensity of CL on the substrate was linearly related to the concentration of standard ethanol gas. These results were compared with the CL intensity of the CCD camera recording image in the visualization system. This system is available for gas components not only for spatial but also for temporal analysis in real time. A high‐purity sodium salt HG solution (L‐HG) instead of standard luminol solution and an enhancer, eosin Y (EY) solution, were adapted for improvement of CL intensity of the system. The visualization of gaseous ethanol was achieved at a detection limit of 3 ppm at optimized concentrations of L‐HG solution and EY. Copyright © 2011 John Wiley & Sons, Ltd.     

Importance of hydroxyl radical in the vanadium-stimulated oxidation of NADH

Vanadium compounds are known to stimulate the oxidation of NAD(P)H, but the mechanism remains unclear. This reaction was studied spectrophotometrically and by electron spin resonance spectroscopy (ESR) using vanadium in the reduced state (+4, vanadyl) and the oxidized state (+5, vanadate). In 25 mM sodium phosphate buffer at pH 7.4, vanadyl was slightly more effective in stimulating NADH oxidation than was vanadate. Addition of a superoxide generating system, xanthine/xanthine oxidase, resulted in a marked increase in NADH oxidation by vanadyl, and to a lesser extent, by vanadate. Decreasing the pH with superoxide present increased NADH oxidation for both vanadate and vanadyl. Addition of hydrogen peroxide to the reaction mixture did not change the NADH oxidation by vanadate, regardless of concentration or pH. With vanadyl however, addition of hydrogen peroxide greatly enhanced NADH oxidation which further increased with lower pH. Use of the spin trap DMPO in reaction mixtures containing vanadyl and hydrogen peroxide or a superoxide generating system resulted in the detection by ESR of hydroxyl. In each case, the hydroxyl radical signal intensity increased with vanadium concentration. Catalase was able to inhibit the formation of the DMPO--OH adduct formed by vanadate plus superoxide. These results show that the ability of vanadium to act in a Fenton-type reaction is an important process in the vanadium-stimulated oxidation of NADH.     

Application of optimized chemiluminescence assay for determination of the antioxidant capacity of herbal extracts

A chemiluminescence (CL) assay for the determination of antioxidant capacity (AOC) has been optimized and applied to analyses of herbal extracts in the present study. The optimal concentrations of reagents (luminol, H₂O₂, horseradish peroxidase) have been determined, as well as the optimal reaction conditions (wavelength, pH, temperature, sample volume). All of the measurements were performed at the emission maximum of the oxidized form of luminol (425 nm). The optimal concentrations of the reagents were determined as follows: 1.6 mmol/L luminol, 7.5 mmol/L H₂O₂ and 0.14 U/mL horseradish peroxidase activity in the reaction mixture. Analyses were carried out in phosphate buffer, pH 7.4, at room temperature. With the optimized CL assay, the AOCs of various water and methanol herbal extracts were determined (dog rose hips, plantain leaves and coltsfoot and thyme flowers) and the results were compared to those obtained by other classical methods for the evaluation of antioxidants. Strong correlations (r > 0.9) with the Folin–Ciocalteau assay and the 2,2‐diphenyl‐1‐picrylhydrazyl radical (DPPH)^● assay are confirmed, although there is no correlation between AOC and the concentration of ascorbic acid in the samples analysed. This optimized CL assay is simple, rapid and reliable, and it represents a good alternative to classical methods (Folin–Ciocalteau, DPPH^●) for the determination of AOC of herbal extracts and other food samples. Copyright © 2012 John Wiley & Sons, Ltd.     

Detection of superoxide and peroxynitrite in model systems and mitochondria by the luminol analogue L-012

In the present study we investigated the specificity and sensitivity of the chemiluminescence (CL) dye and luminol analogue 8-amino-5-chloro-7-phenylpyrido[3,4-d]pyridazine-1,4-(2H,3H) dione (L-012) to detect reactive oxygen species (ROS) such as superoxide, peroxynitrite and hydrogen peroxide in cell free systems as well as in isolated mitochondria. The results obtained by L-012 were compared with other CL substances such as luminol, lucigenin, coelenterazine and the fluorescence dye dihydroethidine. The results indicate that the L-012-derived chemiluminescence induced by superoxide from hypoxanthine/xanthine oxidase (HX/XO) or by 3-morpholino sydnonimine (SIN-1)-derived peroxynitrite largely depends on the incubation time. Irrespective of the experimental conditions, L-012-derived CL in response to HX/XO and SIN-1 was 10-100 fold higher than with other CL dyes tested. In a cell-free system, authentic peroxynitrite yielded a higher L-012-enhanced CL signal than authentic superoxide and the superoxide-induced signal in cell-free as well as isolated mitochondria increased in the presence of equimolar concentrations of nitrogen monoxide (NO). The superoxide signal/background ratio detected by L-012-enhanced CL in isolated mitochondria with blocked respiration was 7 fold higher than that obtained by the superoxide sensitive fluorescence dye dihydroethidine. We conclude that L-012-derived CL may provide a sensitive and reliable tool to detect superoxide and peroxynitrite formation in mitochondrial suspensions.     

Determination of nitrate and nitrite in freshwaters using flow‐injection with luminol chemiluminescence detection

A simple and sensitive flow‐injection (FI) method for the determination of nitrate and nitrite in natural waters, based on luminol chemiluminescence (CL) detection, is reported. Nitrate was reduced online to nitrite via a copperized cadmium (Cu–Cd) column and then reacted with acidic hydrogen peroxide to form peroxynitrous acid. CL emission was observed from the oxidation of luminol in an alkaline medium in the presence of the peroxynitrite anion. The limits of detection (S:N = 3) were 0.02 and 0.01 µg N/L, with sample throughputs of 40 and 90 /h for nitrate and nitrite, respectively. Calibration graphs were linear over the range 0.02–50 and 0.01–50 µg N/L [R² = 0.9984 (n = 8) and R² = 0.9965 (n = 7)] for nitrate and nitrite, respectively, with relative standard deviations (RSDs; n = 3) in the range 1.8–4.6%. The key chemical and physical variables (reagent concentrations, buffer pH, flow rates, sample volume, Cu–Cd reductor column length) were optimized and potential interferences investigated. The effect of cations [Ca(II), Mg(II), Co(II), Fe(II) and Cu(II)] was masked online with EDTA. Common anions (PO₄^3?, SO₄^2? and HCO₃^?) did not interfere at their maximum admissible concentrations in freshwaters. The effect of salinity on the luminol CL reaction with and without nitrate and nitrite (2 and 0.5 µg N/L, respectively) was also investigated. The method was successfully applied to freshwaters and the results obtained were in good agreement with those obtained by an automated segmented flow analyser reference method. Copyright © 2011 John Wiley & Sons, Ltd.