Essential DNA sequence for the replication of Rts1.

The promoter sequence of the mini-Rts1 repA gene encoding the 33,000-dalton RepA protein that is essential for replication was defined by RNA polymerase protection experiments and by analyzing RepA protein synthesized in maxicells harboring mini-Rts1 derivatives deleted upstream of or within the presumptive promoter region. The -10 region of the promoter which shows homology to the incII repeat sequences overlaps two inverted repeats. One of the repeats forms a pair with a sequence in the -35 region, and the other forms a pair with the translation initiation region. The replication origin region, ori(Rts1), which was determined by supplying RepA protein in trans, was localized within 188 base pairs in a region containing three incII repeats and four GATC sequences. Dyad dnaA boxes that exist upstream from the GATC sequences appeared to be dispensable for the origin function, but deletion of both dnaA boxes from ori(Rts1) resulted in reduced replication frequency, suggesting that host-encoded DnaA protein is involved in the replication of Rts1 as a stimulatory element. Combination of the minimal repA and ori(Rts1) segments, even in the reverse orientation compared with the natural sequence, resulted in reconstitution of an autonomously replicating molecule.     

Copy mutant of mini-Rts1: lowered binding affinity of mutated RepA protein to direct repeats.

Nucleotide sequence analysis of mini-Rts1 and its copy mutant disclosed the presence of two clusters of direct-repeat sequences flanking the coding region for the 33,000-dalton RepA protein and two base substitutions on the mini-Rts1cop1 genome (Kamio et al., J. Bacteriol. 158:307-312, 1984). On subcloning of the left cluster (incI) that is located downstream from repA, the five 24-base-pair repeats expressed a stronger incompatibility toward mini-Rts1 than did the four repeats. The right cluster (incII) that contains three 21-base-pair repeats also exhibited strong incompatibility toward mini-Rts1. By separating the two base substitutions of mini-Rts1cop1, the mutation that is responsible for the copy increase was determined to be a single base change in the RepA coding region. Both clusters of the repeats, cloned separately into the vector plasmid, showed a weaker incompatibility toward mini-Rts1cop1 than to the wild-type mini-Rts1. These findings suggest a lowered binding affinity of the mutated RepA protein to the direct repeats.     

Nucleotide sequence and copy control function of the extension of the incI region (incI-b) of Rts 1

An Rts1 derivative, pTW20, contains three incompatibility (inc) regions, incI-a (incI in previous studies), incII, and newly determined incI-b loci. By restriction analysis, we have located the incI-b adjacent to the incI-a region on the pTW20 map. Nucleotide sequence analysis of the minimal incI-b region revealed the presence of four repeated sequences, each consisting of 18 bp, which is similar to the incI-a and incII repeats existing on mini-Rts1. All four repeating units were required for expression of a strong incompatibility. In addition, RepA protein, essential for the replication of Rts1, bound specifically to the repeated sequences, suggesting that the repeats would titrate out RepA protein as do incI-a and IncII. Insertion of the incI-b to a mini-Rts1 plasmid in a natural arrangement decreases the copy number of mini-Rts1 to the same level as that of mini-F. The incI-a and incI-b might be a single constituent in incompatibility and copy number control of Rts1.     

Interactions of the RepA1 protein with its replicon targets: two opposing roles in control of plasmid replication.

By studying the interaction of derivatives of RepFIC miniplasmids, we were able to demonstrate that under certain conditions the RepA1 initiator protein inhibits plasmid replication. An analysis of cloned derivatives whose replication is inhibited by the RepA1 protein revealed the existence of two areas of the RepFIC genome that interact with RepA1 in the inhibition reaction. One of these areas, which occurs in the origin region, was explored by in vivo methylation protection footprinting studies. The protected area was 200 bp long and showed a definite periodicity of protected and hypersensitive sites, suggesting that RepA1 promotes a topological change in the RepFIC genome. The significance of our results is discussed in the context of plasmid replication control.     

Interaction of the initiator protein of an IncB plasmid with its origin of DNA replication

The replication initiator protein RepA of the IncB plasmid pMU720 was purified and used in DNase I protection assays in vitro. RepA protected a 68-bp region of the origin of replication of pMU720. This region, which lies immediately downstream of the DnaA box, contains four copies of the sequence motif 5'AANCNGCAA3'. Mutational analyses identified this sequence as the binding site specifically recognized by RepA (the RepA box). Binding of RepA to the RepA boxes was ordered and sequential, with the box closest to the DnaA binding site (box 1) occupied first and the most distant boxes (boxes 3 and 4) occupied last. However, only boxes 1, 2, and 4 were essential for origin activity, with box 3 playing a lesser role. Changing the spacing between box 1 and the other three boxes affected binding of RepA in vitro and origin activity in vivo, indicating that the RepA molecules bound to ori(B) interact with one another.     

Induced bending of plasmid pLS1 DNA by the plasmid-encoded protein RepA

The broad host range streptococcal plasmid pLS1 encodes for a 5.1-kDa repressor protein, RepA. This protein has affinity for DNA (linear or supercoiled) and is translated from the same mRNA as the replication initiator protein RepB. By gel retardation assays, we observed that RepA shows specificity for binding to the plasmid HinfID fragment, which includes the target of the protein. The target of RepA within the plasmid DNA molecule has been located around the plasmid single site ApaLI. This site is included in a region that contains the promoter for the repA and repB genes and is contiguous to the plasmid ori(+). A complex sequence-directed DNA curvature is observed in this region of pLS1. Upon addition of RepA to plasmid linear DNA or to circularly permuted restriction fragments, this intrinsic curvature was greatly enhanced. Thus, a strong RepA-induced bending could be located in the vicinity of the ApaLI site. Visualization of the bent DNA was achieved by electron microscopy of complexes between RepA and plasmid DNA fragments containing the RepA target.     

Importance of the C terminus of plasmid Rts1 RepA protein for replication and incompatibility of the plasmid.

RepA protein, essential for replication of plasmid Rts1, was found to bind in vivo immediately upstream of the repA promoter in studies with mini-Rts1 derivatives with deletions in the upstream region of repA. We constructed another series of repA mutants that would encode RepA derivatives containing oligopeptide substitutions in place of the carboxyl-terminal six amino acids. These modified RepA proteins could not activate ori (Rts1) at all and showed various degrees of incompatibility, or no incompatibility, toward a mini-Rts1 plasmid. These results suggest that the carboxyl-terminal six (or fewer) amino acids of RepA are important for exerting replication and incompatibility functions. One of the RepA derivatives, which showed an evident incompatibility without initiating replication, was examined for its ability to repress the repA gene.     

Purification and characterization of RepA, a protein involved in the copy number control of plasmid pLS1.

The promiscuous streptococcal plasmid pLS1 encodes for the 5.1 kDa RepA protein, involved in the regulation of the plasmid copy number. Synthesis of RepA was observed both in Bacillus subtilis minicells and in an Escherichia coli expression system. From this system, the protein has been purified and it appears to be a dimer of identical subunits. The amino acid sequence of RepA has been determined. RepA shows the alpha helix-turn-alpha helix motif typical of many DNA-binding proteins and it shares homology with a number of repressors, specially with the TrfB repressor encoded by the broad-host-range plasmid RK2. DNase I footprinting revealed that the RepA target is located in the region of the promoter for the repA and repB genes. Trans-complementation analysis showed that in vivo, RepA behaves as a repressor by regulating the plasmid copy number. We propose that the regulatory role of RepA is by limitation of the synthesis of the initiator protein RepB.     

Analysis of functional domains of Rts1 RepA by means of a series of hybrid proteins with P1 RepA.

The RepA protein of the plasmid Rts1, consisting of 288 amino acids, is a trans-acting protein essential for initiation of plasmid replication. To study the functional domains of RepA, hybrid proteins of Rts1 RepA with the RepA initiator protein of plasmid P1 were constructed such that the N-terminal portion was from Rts1 RepA and the C-terminal portion was from P1 RepA. Six hybrid proteins were examined for function. The N-terminal region of Rts1 RepA between amino acid residues 113 and 129 was found to be important for Rts1 ori binding in vitro. For activation of the origin in vivo, an Rts1 RepA subregion between residues 177 and 206 as well as the DNA binding domain was required. None of the hybrid initiator proteins activated the P1 origin. Both in vivo and in vitro studies showed, in addition, that a C-terminal portion of Rts1 RepA was required along with the DNA binding and ori activating domains to achieve autorepression, suggesting that the C-terminal region of Rts1 RepA is involved in dimer formation. A hybrid protein consisting of the N-terminal 145 amino acids of Rts1 and the C-terminal 142 amino acids from P1 showed strong interference with both Rts1 and P1 replication, whereas other hybrid proteins showed no or little effect on P1 replication.     

Analysis of pCU1 replication origins: dependence of oriS on the plasmid-encoded replication initiation protein RepA

The broad-host-range replicon of the plasmid pCU1 has three origins of vegetative replication called oriB, oriS, and oriV. In the multi-origin replicon, individual origins can distinguish among replication factors provided by the host. It has been found that during replication in Escherichia coli polA(-) host, oriS was the only active origin of a mutant pCU1 derivative bearing a mutation in the gene encoding replication initiation protein RepA. To further investigate the capacity of oriS to function in an E. coli polA(-) host we constructed a number of clones of the basic replicon of pCU1 containing oriS as the only replication origin. An oriS construct created with pUC18 could transform the polA(-) strain when RepA was supplied in trans. When the oriS region (between nucleotides 290 and 832) was ligated to an antibiotic resistance Omega fragment, the construct could be recovered as a plasmid from polA(+) strain if functional RepA was provided in trans. Our results therefore indicate that the basic replicon of pCU1, containing oriS as the sole origin, does require RepA to initiate plasmid replication in E. coli     

P1 plasmid replication. Purification and DNA-binding activity of the replication protein RepA

The minimal P1 replicon encompasses an open reading frame for the essential replication protein, RepA, bracketed by two sets of multiple 19-base pair repeated sequences, incA and incC. This study focused on the interaction of RepA with the incC and incA repeated sequences because earlier studies suggested that incA might control P1 copy number by titrating limiting amounts of RepA and because the incC repeats, which are part of the origin of replication, contain the promoter for repA. RepA is essential for origin function, autoregulates its own synthesis from the promoter, and, when overproduced, blocks origin function. In this study, RepA was overproduced from an expression vector and purified to 90% homogeneity. The binding of RepA to the DNA encompassing repeat sequences was assayed by monitoring the mobility of protein-DNA complexes on polyacrylamide gels. Distinct species of retarded bands were seen with the maximum number of bands corresponding to the number of repeats present in the target fragment. No evidence was found for RepA binding to fragments not containing the repeats. This suggests that the specific binding of RepA to the repeats may be involved in each of the diverse activities of RepA.     

Interaction of the DnaK and DnaJ chaperone system with a native substrate,P1 RepA

DnaK, the Hsp70 chaperone of Escherichia coli interacts with protein substrates in an ATP-dependent manner, in conjunction with DnaJ and GrpE co-chaperones, to carry out protein folding, protein remodeling, and assembly and disassembly of multisubunit protein complexes. To understand how DnaJ targets specific proteins for recognition by the DnaK chaperone system, we investigated the interaction of DnaJ and DnaK with a known natural substrate, bacteriophage P1 RepA protein. By characterizing RepA deletion derivatives, we found that DnaJ interacts with a region of RepA located between amino acids 180 and 200 of the 286-amino acid protein. A peptide corresponding to amino acids 180-195 inhibited the interaction of RepA and DnaJ. Two site-directed RepA mutants with alanine substitutions in this region were about 4-fold less efficiently activated for oriP1 DNA binding by DnaJ and DnaK than wild type RepA. We also identified by deletion analysis a site in RepA, in the region of amino acids 35-49, which interacts with DnaK. An alanine substitution mutant in amino acids 36-39 was constructed and found defective in activation by DnaJ and DnaK. Taken together the results suggest that DnaJ and DnaK interact with separate sites on RepA.     

Footprinting studies of specific complexes formed by RepA, a replication initiator of plasmid pCU1, and its binding site

The basic replicon of plasmid pCU1 contains three different replication origins. Replication initiated from the oriB origin requires pCU1-encoded protein RepA. Previously, information analysis of 19 natural RepA binding sequences predicted a 20-bp sequence as a RepA binding site. Guanines contacting RepA in the major groove of DNA have also been determined. In this study, we used the missing-nucleoside method to determine all of the bases relevant to RepA binding. The importance of some thymine bases was also confirmed by a missing-thymine site interference assay. Participation of the 5-methyl groups of two thymines (at positions -6 and 7) in RepA binding was pointed out by a missing-thymine methyl site interference assay. Phosphate groups of the DNA backbone which strongly interfered with RepA binding upon ethylation were also identified. The pattern of contacting positions mapped by hydroxyl radical protection footprinting indicates that RepA binds to one face of B-form DNA. The length of the binding site was found to be 20 bp by dissociation rate measurement of complexes formed between RepA and a variety of binding sequences. The symmetry of the binding site and that of the contacting bases, particularly the reacting 5-methyl groups of two thymines, suggest that pCU1-encoded RepA may contact its site as a homodimer.     

Plasmid replication functions: two distinct segments of plasmid R1, RepA and RepD, express incompatibility and are capable of autonomous replication.

The genetic determinants for replication and incompatibility of plasmid R1 were investigated by gene cloning methods, and three types of R1 miniplasmid derivatives were generated. The first, exemplified by plasmid pKT300, consisted of a single BglII endonuclease-generated deoxyribonucleic acid fragment derived from the R1 region that is located between the determinants for conjugal transfer and antibiotic resistance. Two types of miniplasmids could be formed from PstI endonuclease-generated fragments of pKT300. One of these, which is equivalent to miniplasmids previously generated from plasmids R1-19 and R1-19B2, consisted of two adjacent PstI fragments that encode the RepA replication system of plasmid R1. The other type contained a segment of R1, designated the RepD replication region, that is adjacent to the RepA region and that has not been identified previously as having the capacity for autonomous replication. Plasmid R1, therefore, contained two distinct deoxyribonucleic acid segments capable of autonomous replication. The RepA-RepD miniplasmid pKT300 had a copy number about eightfold higher than that of R1 and hence lacked a determinant for the regulation of plasmid copy number. Like R1, it was maintained stably in dividing bacteria. RepA miniplasmids had copy numbers which were two- to fourfold higher than that of R1 (i.e., which were lower than that of pKT300) and were maintained slightly less stably than those of pKT300 and R1. The RepD miniplasmid was not maintained stably in dividing bacteria. Previous experiments have shown that incompatibility of IncFII group plasmids is specified by a plasmid copy control gene. Despite the fact that RepA miniplasmids of R1 were defective in copy control, they nevertheless expressed incompatibility. This suggests that two genes are responsible for plasmid copy control, one that specifies incompatibility and is located on RepA miniplasmids and another that is located outside of, but adjacent to, the RepA replication region. Hybrid plasmids composed of pBR322 and one PstI fragment from the RepA region, P-8, exhibited incompatibility towards R2 and RepA miniplasmids but not the RepD miniplasmid, whereas hybrids composed of pBR322 and the PstI fragment of the RepD region, P-3, exhibited incompatibility towards R1 and the RepD miniplasmid but not RepA miniplasmids. These results indicate that the two replication systems are functionally distinct and that, although the RepA system is the principal replication system of R1, the RepD system also plays a role in the maintenance of this plasmid.     

Plasmid P1 RepA is homologous to the F plasmid RepE class of initiators

DNA replication of plasmid P1 requires a plasmid-encoded origin DNA-binding protein, RepA. RepA is an inactive dimer and is converted by molecular chaperones into an active monomer that binds RepA binding sites. Although the sequence of RepA is not homologous to that of F plasmid RepE, we found by using fold-recognition programs that RepA shares structural homology with RepE and built a model based on the RepE crystal structure. We constructed mutants in the two predicted DNA binding domains to test the model. As expected, the mutants were defective in P1 DNA binding. The model predicted that RepA binds the first half of the binding site through interactions with the C-terminal DNA binding domain and the second half through interactions with the N-terminal domain. The experiments supported the prediction. The model was further supported by the observation that mutants defective in dimerization map to the predicted subunit interface region, based on the crystal structure of pPS10 RepA, a RepE family member. These results suggest P1 RepA is structurally homologous to plasmid initiators, including those of F, R6K, pSC101, pCU1, pPS10, pFA3, pGSH500, Rts1, RepHI1B, RepFIB, and RSF1010.     

Isolation and properties of the RepA1 protein of the IncFII replicon, RepFIC

The initiator protein RepA1 of the IncFII replicon RepFIC derived from the enterotoxin plasmid EntP307 has been cloned under the control of the lambda PL promoter. This has enabled us to overproduce this protein and study its properties. Here we show that RepA1 is a soluble basic protein with an experimentally determined molecular weight of 40,000. Deletion analysis indicates that the overproduced protein originates from the open reading frame which we previously designated as coding for RepA1. We have also shown that the replication function of the replicon RepFIC depends on the intact RepA1 coding frame.     

P1 plasmid replication: measurement of initiator protein concentration in vivo.

To study the functions of the mini-P1 replication initiation protein RepA quantitatively, we have developed a method to measure RepA concentration by using immunoblotting. In vivo, there are about 20 RepA dimers per unit-copy plasmid DNA. RepA was deduced to be a dimer from gel filtration of the purified protein. Since there are 14 binding sites of the protein per replicon, the physiological concentration of the protein appears to be sufficiently low to be a rate-limiting factor for replication. Autoregulation is apparently responsible for the low protein level; at the physiological concentration of the protein, the repA promoter retains only 0.1% of its full activity as determined by gene fusions to lacZ. When the concentration is further decreased by a factor of 3 or increased by a factor of 40, replication is no longer detectable.