A Novel algorithm for identifying low-complexity regions in a protein sequence

MOTIVATION: We consider the problem of identifying low-complexity regions (LCRs) in a protein sequence. LCRs are regions of biased composition, normally consisting of different kinds of repeats. RESULTS: We define new complexity measures to compute the complexity of a sequence based on a given scoring matrix, such as BLOSUM 62. Our complexity measures also consider the order of amino acids in the sequence and the sequence length. We develop a novel graph-based algorithm called GBA to identify LCRs in a protein sequence. In the graph constructed for the sequence, each vertex corresponds to a pair of similar amino acids. Each edge connects two pairs of amino acids that can be grouped together to form a longer repeat. GBA finds short subsequences as LCR candidates by traversing this graph. It then extends them to find longer subsequences that may contain full repeats with low complexities. Extended subsequences are then post-processed to refine repeats to LCRs. Our experiments on real data show that GBA has significantly higher recall compared to existing algorithms, including 0j.py, CARD, and SEG. AVAILABILITY: The program is available on request.     

CAST: an iterative algorithm for the complexity analysis of sequence tracts. Complexity analysis of sequence tracts

MOTIVATION: Sensitive detection and masking of low-complexity regions in protein sequences. Filtered sequences can be used in sequence comparison without the risk of matching compositionally biased regions. The main advantage of the method over similar approaches is the selective masking of single residue types without affecting other, possibly important, regions. RESULTS: A novel algorithm for low-complexity region detection and selective masking. The algorithm is based on multiple-pass Smith-Waterman comparison of the query sequence against twenty homopolymers with infinite gap penalties. The output of the algorithm is both the masked query sequence for further analysis, e.g. database searches, as well as the regions of low complexity. The detection of low-complexity regions is highly specific for single residue types. It is shown that this approach is sufficient for masking database query sequences without generating false positives. The algorithm is benchmarked against widely available algorithms using the 210 genes of Plasmodium falciparum chromosome 2, a dataset known to contain a large number of low-complexity regions. AVAILABILITY: CAST (version 1.0) executable binaries are available to academic users free of charge under license. Web site entry point, server and additional material: http://www.ebi.ac.uk/research/cgg/services/cast/     

Predicting genes expressed via -1 and +1 frameshifts

Computational identification of ribosomal frameshift sites in genomic sequences is difficult due to their diverse nature, yet it provides useful information for understanding the underlying mechanisms and discovering new genes. We have developed an algorithm that searches entire genomic or mRNA sequences for frameshifting sites, and implements the algorithm as a web-based program called FSFinder (Frameshift Signal Finder). The current version of FSFinder is capable of finding -1 frameshift sites on heptamer sequences X XXY YYZ, and +1 frameshift sites for two genes: protein chain release factor B (prfB) and ornithine decarboxylase antizyme (oaz). We tested FSFinder on approximately 190 genomic and partial DNA sequences from a number of organisms and found that it predicted frameshift sites efficiently and with greater sensitivity and specificity than existing approaches. It has improved sensitivity because it considers many known components of a frameshifting cassette and searches these components on both + and - strands, and its specificity is increased because it focuses on overlapping regions of open reading frames and prioritizes candidate frameshift sites. FSFinder is useful for discovering unknown genes that utilize alternative decoding, as well as for analyzing frameshift sites. It is freely accessible at http://wilab.inha.ac.kr/FSFinder/.     

Detecting cryptically simple protein sequences using the SIMPLE algorithm

MOTIVATION: Low-complexity or cryptically simple sequences are widespread in protein sequences but their evolution and function are poorly understood. To date methods for the detection of low complexity in proteins have been directed towards the filtering of such regions prior to sequence homology searches but not to the analysis of the regions per se. However, many of these regions are encoded by non-repetitive DNA sequences and may therefore result from selection acting on protein structure and/or function. RESULTS: We have developed a new tool, based on the SIMPLE algorithm, that facilitates the quantification of the amount of simple sequence in proteins and determines the type of short motifs that show clustering above a certain threshold. By modifying the sensitivity of the program simple sequence content can be studied at various levels, from highly organised tandem structures to complex combinations of repeats. We compare the relative amount of simplicity in different functional groups of yeast proteins and determine the level of clustering of the different amino acids in these proteins. AVAILABILITY: The program is available on request or online at http://www.biochem.ucl.ac.uk/bsm/SIMPLE.     

Comparative ab initio prediction of gene structures using pair HMMs

We present a novel comparative method for the ab initio prediction of protein coding genes in eukaryotic genomes. The method simultaneously predicts the gene structures of two un-annotated input DNA sequences which are homologous to each other and retrieves the subsequences which are conserved between the two DNA sequences. It is capable of predicting partial, complete and multiple genes and can align pairs of genes which differ by events of exon-fusion or exon-splitting. The method employs a probabilistic pair hidden Markov model. We generate annotations using our model with two different algorithms: the Viterbi algorithm in its linear memory implementation and a new heuristic algorithm, called the stepping stone, for which both memory and time requirements scale linearly with the sequence length. We have implemented the model in a computer program called DOUBLESCAN. In this article, we introduce the method and confirm the validity of the approach on a test set of 80 pairs of orthologous DNA sequences from mouse and human. More information can be found at: http://www.sanger.ac.uk/Software/analysis/doublescan/     

A simple algorithm to infer gene duplication and speciation events on a gene tree

MOTIVATION: When analyzing protein sequences using sequence similarity searches, orthologous sequences (that diverged by speciation) are more reliable predictors of a new protein's function than paralogous sequences (that diverged by gene duplication), because duplication enables functional diversification. The utility of phylogenetic information in high-throughput genome annotation ('phylogenomics') is widely recognized, but existing approaches are either manual or indirect (e.g. not based on phylogenetic trees). Our goal is to automate phylogenomics using explicit phylogenetic inference. A necessary component is an algorithm to infer speciation and duplication events in a given gene tree. RESULTS: We give an algorithm to infer speciation and duplication events on a gene tree by comparison to a trusted species tree. This algorithm has a worst-case running time of O(n(2)) which is inferior to two previous algorithms that are approximately O(n) for a gene tree of sequences. However, our algorithm is extremely simple, and its asymptotic worst case behavior is only realized on pathological data sets. We show empirically, using 1750 gene trees constructed from the Pfam protein family database, that it appears to be a practical (and often superior) algorithm for analyzing real gene trees. AVAILABILITY: http://www.genetics.wustl.edu/eddy/forester.     

A branch-and-bound algorithm for the inference of ancestral amino-acid sequences when the replacement rate varies among sites: Application to the evolution of five gene families

MOTIVATION: We developed an algorithm to reconstruct ancestral sequences, taking into account the rate variation among sites of the protein sequences. Our algorithm maximizes the joint probability of the ancestral sequences, assuming that the rate is gamma distributed among sites. Our algorithm probably finds the global maximum. The use of 'joint' reconstruction is motivated by studies that use the sequences at all the internal nodes in a phylogenetic tree, such as, for instance, the inference of patterns of amino-acid replacement, or tracing the biochemical changes that occurred during the evolution of a given protein family. RESULTS: We give an algorithm that guarantees finding the global maximum. The efficient search method makes our method applicable to datasets with large number sequences. We analyze ancestral sequences of five gene families, exploring the effect of the amount of among-site-rate-variation, and the degree of sequence divergence on the resulting ancestral states. AVAILABILITY AND SUPPLEMENTARY INFORMATION: http://evolu3.ism.ac.jp/~tal/ Contact: tal@ism.ac.jp     

CLAGen: a tool for clustering and annotating gene sequences using a suffix tree algorithm

Most multiple gene sequence alignment methods rely on conventions regarding the score of a multiple alignment in pairwise fashion. Therefore, as the number of sequences increases, the runtime of sequencing expands exponentially. In order to solve the problem, this paper presents a multiple sequence alignment method using a linear-time suffix tree algorithm to cluster similar sequences at one time without pairwise alignment. After searching for common subsequences, cross-matching common subsequences were generated, and sometimes inexact matching was found. So, a procedure aimed at masking the inexact cross-matching pairs was suggested here. In addition, BLAST was combined with a clustering tool in order to annotate the clusters generated by suffix tree clustering. The proposed method for clustering and annotating genes consists of the following steps: (1) construction of a suffix tree; (2) searching and overlapping common subsequences; (3) grouping subsequence pairs; (4) masking cross-matching pairs; (5) clustering gene sequences; (6) annotating gene clusters by the BLAST search. The performance of the proposed system, CLAGen, was successfully evaluated with 42 gene sequences in a TCA cycle (a citrate cycle) of bacteria. The system generated 11 clusters and found the longest subsequences of each cluster, which are biologically significant.     

PhyloDraw: a phylogenetic tree drawing system

SUMMARY: PhyloDraw is a unified viewing tool for phylogenetic trees. PhyloDraw supports various kinds of multi-alignment formats (Dialign2, Clustal-W, Phylip format, NEXUS, MEGA, and pairwise distance matrix) and visualizes various kinds of tree diagrams, e.g. rectangular cladogram, slanted cladogram, phylogram, unrooted tree, and radial tree. By using several control parameters, users can easily and interactively manipulate the shape of phylogenetic trees. This program can export the final tree layout to BMP (bitmap image format) and PostScript. AVAILABILITY: http://pearl.cs.pusan.ac.kr/phylodraw/ CONTACT: jhchoi@pearl.cs.pusan.ac.kr     

Estimation of P-values for global alignments of protein sequences.

MOTIVATION: The global alignment of protein sequence pairs is often used in the classification and analysis of full-length sequences. The calculation of a Z-score for the comparison gives a length and composition corrected measure of the similarity between the sequences. However, the Z-score alone, does not indicate the likely biological significance of the similarity. In this paper, all pairs of domains from 250 sequences belonging to different SCOP folds were aligned and Z-scores calculated. The distribution of Z-scores was fitted with a peak distribution from which the probability of obtaining a given Z-score from the global alignment of two protein sequences of unrelated fold was calculated. A similar analysis was applied to subsequence pairs found by the Smith-Waterman algorithm. These analyses allow the probability that two protein sequences share the same fold to be estimated by global sequence alignment. RESULTS: The relationship between Z-score and probability varied little over the matrix/gap penalty combinations examined. However, an average shift of +4.7 was observed for Z-scores derived from global alignment of locally-aligned subsequences compared to global alignment of the full-length sequences. This shift was shown to be the result of pre-selection by local alignment, rather than any structural similarity in the subsequences. The search ability of both methods was benchmarked against the SCOP superfamily classification and showed that global alignment Z-scores generated from the entire sequence are as effective as SSEARCH at low error rates and more effective at higher error rates. However, global alignment Z-scores generated from the best locally-aligned subsequence were significantly less effective than SSEARCH. The method of estimating statistical significance described here was shown to give similar values to SSEARCH and BLAST, providing confidence in the significance estimation. AVAILABILITY: Software to apply the statistics to global alignments is available from http://barton.ebi.ac.uk. CONTACT: geoff@ebi.ac.uk     

PSIbase: a database of Protein Structural Interactome map (PSIMAP)

Protein Structural Interactome map (PSIMAP) is a global interaction map that describes domain-domain and protein-protein interaction information for known Protein Data Bank structures. It calculates the Euclidean distance to determine interactions between possible pairs of structural domains in proteins. PSIbase is a database and file server for protein structural interaction information calculated by the PSIMAP algorithm. PSIbase also provides an easy-to-use protein domain assignment module, interaction navigation and visual tools. Users can retrieve possible interaction partners of their proteins of interests if a significant homology assignment is made with their query sequences. AVAILABILITY: http://psimap.org and http://psibase.kaist.ac.kr/     

ModuleSearch: finding functional modules in a protein–protein interaction network

Many biological processes are performed by a group of proteins rather than by individual proteins. Proteins involved in the same biological process often form a densely connected sub-graph in a protein–protein interaction network. Therefore, finding a dense sub-graph provides useful information to predict the function or protein complex of uncharacterised proteins in the sub-graph. We developed a heuristic algorithm that finds functional modules in a protein–protein interaction network and visualises the modules. The algorithm has been implemented in a platform-independent, standalone program called ModuleSearch. In an interaction network of yeast proteins, ModuleSearch found 366 overlapping modules. Of the modules, 71% have a function shared by more than half the proteins in the module and 58% have a function shared by all proteins in the module. Comparison of ModuleSearch with other programs shows that ModuleSearch finds more sub-graphs than most other programs, yet a higher proportion of the sub-graphs correspond to known functional modules. ModuleSearch and sample data are freely available to academics at http://bclab.inha.ac.kr/ModuleSearch.     

A fast algorithm for genome-wide analysis of proteins with repeated sequences.

We present a fast algorithm to search for repeating fragments within protein sequences. The technique is based on an extension of the Smith-Waterman algorithm that allows the calculation of sub-optimal alignments of a sequence against itself. We are able to estimate the statistical significance of all sub-optimal alignment scores. We also rapidly determine the length of the repeating fragment and the number of times it is found in a sequence. The technique is applied to sequences in the Swissprot database, and to 16 complete genomes. We find that eukaryotic proteins contain more internal repeats than those of prokaryotic and archael organisms. The finding that 18% of yeast sequences and 28% of the known human sequences contain detectable repeats emphasizes the importance of internal duplication in protein evolution.     

GoBean: a Java GUI application for visual exploration of GO term enrichments

We have developed a biologist-friendly, Java GUI application (GoBean) for GO term enrichment analysis. It was designed to be a comprehensive and flexible GUI tool for GO term enrichment analysis, combining the merits of other programs and incorporating extensive graphic exploration of enrichment results. An intuitive user interface with multiple panels allows for extensive visual scrutiny of analysis results. The program includes many essential and useful features, such as enrichment analysis algorithms, multiple test correction methods, and versatile filtering of enriched GO terms for more focused analyses. A unique graphic interface reflecting the GO tree structure was devised to facilitate comparisons of multiple GO analysis results, which can provide valuable insights for biological interpretation. Additional features to enhance user convenience include built in ID conversion, evidence code-based gene-GO association filtering, set operations of gene lists and enriched GO terms, and user -provided data files. It is available at http://neon.gachon.ac.kr/GoBean/.     

Bayesian adaptive sequence alignment algorithms

The selection of a scoring matrix and gap penalty parameters continues to be an important problem in sequence alignment. We describe here an algorithm, the 'Bayes block aligner, which bypasses this requirement. Instead of requiring a fixed set of parameter settings, this algorithm returns the Bayesian posterior probability for the number of gaps and for the scoring matrices in any series of interest. Furthermore, instead of returning the single best alignment for the chosen parameter settings, this algorithm returns the posterior distribution of all alignments considering the full range of gapping and scoring matrices selected, weighing each in proportion to its probability based on the data. We compared the Bayes aligner with the popular Smith-Waterman algorithm with parameter settings from the literature which had been optimized for the identification of structural neighbors, and found that the Bayes aligner correctly identified more structural neighbors. In a detailed examination of the alignment of a pair of kinase and a pair of GTPase sequences, we illustrate the algorithm's potential to identify subsequences that are conserved to different degrees. In addition, this example shows that the Bayes aligner returns an alignment-free assessment of the distance between a pair of sequences.      

A method for comparing multiple bacterial community structures from 16S rDNA clone library sequences

Culture-independent approaches, based on 16S rDNA sequences, are extensively used in modern microbial ecology. Sequencing of the clone library generated from environmental DNA has advantages over fingerprint-based methods, such as denaturing gradient gel electrophoresis, as it provides precise identification and quantification of the phylotypes present in samples. However, to date, no method exists for comparing multiple bacterial community structures using clone library sequences. In this study, an automated method to achieve this has been developed, by applying pair wise alignment, hierarchical clustering and principle component analysis. The method has been demonstrated to be successful in comparing samples from various environments. The program, named CommCluster, was written in JAVA, and is now freely available, at http://chunlab.snu.ac.kr/commcluster/.     

Pair hidden Markov models on tree structures

MOTIVATION: Computationally identifying non-coding RNA regions on the genome has much scope for investigation and is essentially harder than gene-finding problems for protein-coding regions. Since comparative sequence analysis is effective for non-coding RNA detection, efficient computational methods are expected for structural alignments of RNA sequences. On the other hand, Hidden Markov Models (HMMs) have played important roles for modeling and analysing biological sequences. Especially, the concept of Pair HMMs (PHMMs) have been examined extensively as mathematical models for alignments and gene finding. RESULTS: We propose the pair HMMs on tree structures (PHMMTSs), which is an extension of PHMMs defined on alignments of trees and provides a unifying framework and an automata-theoretic model for alignments of trees, structural alignments and pair stochastic context-free grammars. By structural alignment, we mean a pairwise alignment to align an unfolded RNA sequence into an RNA sequence of known secondary structure. First, we extend the notion of PHMMs defined on alignments of 'linear' sequences to pair stochastic tree automata, called PHMMTSs, defined on alignments of 'trees'. The PHMMTSs provide various types of alignments of trees such as affine-gap alignments of trees and an automata-theoretic model for alignment of trees. Second, based on the observation that a secondary structure of RNA can be represented by a tree, we apply PHMMTSs to the problem of structural alignments of RNAs. We modify PHMMTSs so that it takes as input a pair of a 'linear' sequence and a 'tree' representing a secondary structure of RNA to produce a structural alignment. Further, the PHMMTSs with input of a pair of two linear sequences is mathematically equal to the pair stochastic context-free grammars. We demonstrate some computational experiments to show the effectiveness of our method for structural alignments, and discuss a complexity issue of PHMMTSs.     

Basic local alignment search tool

A new approach to rapid sequence comparison, basic local alignment search tool (BLAST), directly approximates alignments that optimize a measure of local similarity, the maximal segment pair (MSP) score. Recent mathematical results on the stochastic properties of MSP scores allow an analysis of the performance of this method as well as the statistical significance of alignments it generates. The basic algorithm is simple and robust; it can be implemented in a number of ways and applied in a variety of contexts including straightforward DNA and protein sequence database searches, motif searches, gene identification searches, and in the analysis of multiple regions of similarity in long DNA sequences. In addition to its flexibility and tractability to mathematical analysis, BLAST is an order of magnitude faster than existing sequence comparison tools of comparable sensitivity.