On the construction, circuitry and properties of liquid metal strain gages

A quick and easy method by which reliable and accurate liquid metal strain gages (LMSG) can be manufactured for use in measuring large strains within biological tissues has been developed. The circuitry used to power the gages is also simple and allows gage voltages to be recorded without the need for instrumentation amplifiers. An added advantage is that the gage output indicates absolute gage length rather than change in gage length. Lastly, evaluation of these gages error sensitivity has shown them to be acceptable for measurement of strains of magnitudes occurring within many soft tissues.     

Mechanical properties of the human lumbar anterior longitudinal ligament.

A new technique incorporating a motion analysis system and a materials testing machine was used to investigate regional differences in the tensile mechanical properties of the lumbar spine anterior longitudinal ligament (ALL). Bone-ALL-bone specimens were prepared from young human cadaveric motion segments with no disc or bony pathology. Each specimen was distracted until failure at a constant crosshead displacement rate of 2.5 mm s-1 (approximately 1.0% strain per second). Strains were evaluated from digitized video recordings of markers attached to the ALL at 12 sites along its length and width, including the ligament substance and insertions. The 'overall' strain in the ligament was calculated from the outermost pairs of markers along the ligament length. The average tensile strength, the 'overall' tensile modulus and the 'overall' strain of the ALL at failure were 27.4 MPa (S.D. 5.9), 759 MPa (S.D. 336) and 4.95% (S.D. 1.51), respectively. Large and significant variations in the strains were present along the width and length of the ALL. Peak substance strains were over twofold greater than peak strains at the ligament insertion sites, whereas across the ligament width, peak strains in the outer portion of the ligament were over 40% greater than in the central region. Failure consistently occurred in the ligament mid-substance and ultimate strains at the ligament failure site averaged 12.1% (S.D. 2.3). These results indicate that the strains are highly nonuniform in the normal ALL.     

Comparison of strain measurement in the mouse forearm using subject-specific finite element models,strain gaging,and digital image correlation

Mechanical loading in bone leads to the activation of bone-forming pathways that are most likely associated with a minimum strain threshold being experienced by the osteocyte. To investigate the correlation between cellular response and mechanical stimuli, researchers must develop accurate ways to measure/compute strain both externally on the bone surface and internally at the osteocyte level. This study investigates the use of finite element (FE) models to compute bone surface strains on the mouse forearm. Strains from three FE models were compared to data collected experimentally through strain gaging and digital image correlation (DIC). Each FE model was assigned subject-specific bone properties and consisted of one-dimensional springs representing the interosseous membrane. After three-point bending was performed on the ulnae and radii, moment of inertia was determined from microCT analysis of the bone region between the supports and then used along with standard beam analyses to calculate the Young’s modulus. Non-contact strain measurements from DIC were determined to be more suitable for validating numerical results than experimental data obtained through conventional strain gaging. When comparing strain responses in the three ulnae, we observed a 3–14% difference between numerical and DIC strains while the strain gage values were 37–56% lower than numerical values. This study demonstrates a computational approach for capturing bone surface strains in the mouse forearm. Ultimately, strains from these macroscale models can be used as inputs for microscale and nanoscale FE models designed to analyze strains directly in the osteocyte lacunae.     

An extensometer for global measurement of bone strain suitable for use in vivo in humans

An axial extensometer able to measure global bone strain magnitudes and rates encountered during physiological activity, and suitable for use in vivo in human subjects, is described. The extensometer uses paired capacitive sensors mounted to intraosseus pins and allows measurement of strain due to bending in the plane of the extensometer as well as uniaxial compression or tension. Data are presented for validation of the device against a surface-mounted strain gage in an acrylic specimen under dynamic four-point bending, with square wave and sinusoidal loading inputs up to 1500 mu epsilon and 20 Hz, representative of physiological strain magnitudes and frequencies. Pearson's correlation coefficient (r) between extensometer and strain gage ranged from 0.960 to 0.999. Mean differences between extensometer and strain gage ranged up to 15.3 mu epsilon. Errors in the extensometer output were directly proportional to the degree of bending that occurs in the specimen, however, these errors were predictable and less than 1 mu epsilon for the loading regime studied. The device is capable of tracking strain rates in excess of 90,000 mu epsilon/s.     

A real-time computational model for estimating kinematics of ankle ligaments

Background: An accurate assessment of ankle ligament kinematics is crucial in understanding the injury mechanisms and can help to improve the treatment of an injured ankle, especially when used in conjunction with robot-assisted therapy. A number of computational models have been developed and validated for assessing the kinematics of ankle ligaments. However, few of them can do real-time assessment to allow for an input into robotic rehabilitation programs. Method: An ankle computational model was proposed and validated to quantify the kinematics of ankle ligaments as the foot moves in real-time. This model consists of three bone segments with three rotational degrees of freedom (DOFs) and 12 ankle ligaments. This model uses inputs for three position variables that can be measured from sensors in many ankle robotic devices that detect postures within the foot–ankle environment and outputs the kinematics of ankle ligaments. Validation of this model in terms of ligament length and strain was conducted by comparing it with published data on cadaver anatomy and magnetic resonance imaging. Results: The model based on ligament lengths and strains is in concurrence with those from the published studies but is sensitive to ligament attachment positions. Conclusions: This ankle computational model has the potential to be used in robot-assisted therapy for real-time assessment of ligament kinematics. The results provide information regarding the quantification of kinematics associated with ankle ligaments related to the disability level and can be used for optimizing the robotic training trajectory.     

Some chemical and physical properties of extracellular polysaccharides produced by Butyrivibrio fibrisolvens strains

Most strains of Butyrivibrio fibrisolvens are known to produce extracellular polysaccharides (EPs). However, the rheological and functional properties of these EPs have not been determined. Initially, 26 strains of Butyrivibrio were screened for EP yield and apparent viscosities of cell-free supernatants. Yields ranged from less than 1.0 to 16.3 mg per 100 mg of glucose added to the culture. Viscosities ranged from 0.71 to 5.44 mPa.s. Five strains (CF2d, CF3, CF3a, CE51, and H10b) were chosen for further screening. The apparent viscosity of the EP from each of these strains decreased by only 50 to 60% when the shear rate was increased from 20 to 1,000 s-1. Strain CE51 produced the EP having the highest solution viscosity. A detailed comparison of shear dependency of the EP from strain CF3 with xanthan gum showed that this EP was less shear sensitive than xanthan gum and, at a shear rate of 1,000 s-1, more viscous. EPs from strains CF3 and H10b were soluble over a wide range of pH (1 to 13) in 80% (vol/vol) ethanol-water or in 1% (wt/vol) salt solutions. The pH of 1% EP solutions was between 4.5 and 5.5. Addition of acid increased solution viscosities, whereas addition of base decreased viscosity. EPs from strains CF3, CE51, and H10b displayed qualitatively similar infrared spectra. Calcium and sodium were the most abundant minerals in the three EPs. The amounts of magnesium, calcium, and iron varied considerably among the EPs, but the potassium contents remained relatively constant.     

Some chemical and physical properties of extracellular polysaccharides produced by Butyrivibrio fibrisolvens strains.

Most strains of Butyrivibrio fibrisolvens are known to produce extracellular polysaccharides (EPs). However, the rheological and functional properties of these EPs have not been determined. Initially, 26 strains of Butyrivibrio were screened for EP yield and apparent viscosities of cell-free supernatants. Yields ranged from less than 1.0 to 16.3 mg per 100 mg of glucose added to the culture. Viscosities ranged from 0.71 to 5.44 mPa.s. Five strains (CF2d, CF3, CF3a, CE51, and H10b) were chosen for further screening. The apparent viscosity of the EP from each of these strains decreased by only 50 to 60% when the shear rate was increased from 20 to 1,000 s-1. Strain CE51 produced the EP having the highest solution viscosity. A detailed comparison of shear dependency of the EP from strain CF3 with xanthan gum showed that this EP was less shear sensitive than xanthan gum and, at a shear rate of 1,000 s-1, more viscous. EPs from strains CF3 and H10b were soluble over a wide range of pH (1 to 13) in 80% (vol/vol) ethanol-water or in 1% (wt/vol) salt solutions. The pH of 1% EP solutions was between 4.5 and 5.5. Addition of acid increased solution viscosities, whereas addition of base decreased viscosity. EPs from strains CF3, CE51, and H10b displayed qualitatively similar infrared spectra. Calcium and sodium were the most abundant minerals in the three EPs. The amounts of magnesium, calcium, and iron varied considerably among the EPs, but the potassium contents remained relatively constant.     

Effects of perfusion on the viscoelastic characteristics of liver

Accurate characterization of soft tissue material properties is required to enable new computer-aided medical technologies such as surgical training and planning. The current means of acquiring these properties in the in vivo and ex vivo states is fraught with problems, including limited accessibility and unknown boundary conditions in the former, and unnatural behavior in the latter. This paper presents a new testing method where a whole porcine liver is perfused under physiologic conditions and tested in an ex vivo setting. To characterize the effects of perfusion on the viscoelastic response of liver, indentation devices made force and displacement measurements across four conditions: in vivo, ex vivo perfused, ex vivo post perfused, and in vitro on an excised section. One device imposed cyclic perturbations on the liver's surface, inducing nominal strains up to 5% at frequencies from 0.1 to 200 Hz. The other device measured 300 s of the organ's creep response to applied loads, inducing nominal surface stresses of 6.9-34.7 kPa and nominal strains up to 50%. Results from empirical models indicate that the viscoelastic properties of liver change with perfusion and that two time constants on the order of 1.86 and 51.3s can characterize the liver under large strains typical of surgical manipulation across time periods up to 300 s. Unperfused conditions were stiffer and more viscous than the in vivo state, resulting in permanent strain deformation with repeated indentations. Conversely, the responses from the ex vivo perfusion condition closely approximated the in vivo response.     

Tensile cervical facet capsule ligament mechanics: failure and subfailure responses in the rat

Clinical, epidemiological, and biomechanical studies suggest the involvement of the cervical facet joint in neck pain. Mechanical studies have suggested the facet capsular ligament to be at risk for subfailure tensile injury during whiplash kinematics of the neck. Ligament mechanical properties can be altered by subfailure injury and such loading can induce cellular damage. However, at present, there is no clear understanding of the physiologic context of subfailure facet capsular ligament injury and mechanical implications for whiplash-related pain. Therefore, this study aimed to define a relationship between mechanical properties at failure and a subfailure condition associated with pain for tension in the rat cervical facet capsular ligament. Tensile failure studies of the C6/C7 rat cervical facet capsular ligament were performed using a customized vertebral distraction device. Force and displacement at failure were measured and stiffness and energy to failure were calculated. Vertebral motions and ligament deformations were tracked and maximum principal strains and their directions were calculated. Mean tensile force at failure (2.96 +/- 0.69 N) was significantly greater (p < 0.005) than force at subfailure (1.17 +/- 0.48 N). Mean ligament stiffness to failure was 0.75 +/- 0.27 N/mm. Maximum principal strain at failure (41.3 +/- 20.0%) was significantly higher (p = 0.003) than the corresponding subfailure value (23.1 +/- 9.3%). This study determined that failure and a subfailure painful condition were significantly different in ligament mechanics and findings provide preliminary insight into the relationship between mechanics and pain physiology for this ligament. Together with existing studies, these findings offer additional considerations for defining mechanical thresholds for painful injuries.     

Postnatal developmental changes in CO2 sensitivity in rats.

Ventilatory sensitivity to CO(2) in awake adult Brown Norway (BN) rats is 50-75% lower than in adult Sprague-Dawley (SD) and salt-sensitive Dahl S (SS) rats. The purpose of the present study was to test the hypothesis that this difference would be apparent during the development of CO(2) sensitivity. Four litters of each strain were divided into four groups such that rats were exposed to 7% inspired CO(2) for 5 min in a plethysmograph every third day from postnatal day (P) 0 to P21 and again on P29 and P30. From P0 to P14, CO(2) exposure increased pulmonary ventilation (Ve) by 25-50% in the BN and SD strains and between 25 to over 200% in the SS strain. In all strains beginning around P15, the response to CO(2) increased progressively reaching a peak at P19-21 when Ve during hypercapnia was 175-225% above eucapnia. There were minimal changes in CO(2) sensitivity between P21 and P30, and at both ages there were minimal between-strain differences. At P30, the response to CO(2) in the SS and SD strains was near the adult response, but the response in the BN rats was 100% greater at P30 than in adults. We conclude that 1) CO(2)-sensing mechanisms, and/or mechanisms downstream from the chemoreceptors, change dramatically at the age in rats when other physiological systems are also maturing ( approximately P15), and 2) there is a high degree of age-dependent plasticity in CO(2) sensitivity in rats, which differs between strains.     

Determination of dynamic ankle ligament strains from a computational model driven by motion analysis based kinematic data

External rotation of the foot has been implicated in high ankle sprains. Recent studies by this laboratory, and others, have suggested that torsional traction characteristics of the shoe-surface interface may play a role in ankle injury. While ankle injuries most often involve damage to ligaments due to excessive strains, the studies conducted by this laboratory and others have largely used surrogate models of the lower extremity to determine shoe-surface interface characteristics based on torque measures alone. The objective of this study was to develop a methodology that would integrate a motion analysis-based kinematic foot model with a computational model of the ankle to determine dynamic ankle ligament strains during external foot rotation. Six subjects performed single-legged, internal rotation of the body with a planted foot while a marker-based motion analysis was conducted to track the hindfoot motion relative to the tibia. These kinematic data were used to drive an established computational ankle model. Ankle ligament strains, as a function of time, were determined. The anterior tibiofibular ligament (ATiFL) experienced the highest strain at 9.2±1.1%, followed by the anterior deltoid ligament (ADL) at 7.8±0.7%, averaged over the six subjects. The peak ATiFL strain occurred prior to peak strain in the ADL in all subjects. This novel methodology may provide new insights into mechanisms of high ankle sprains and offer a basis for future evaluations of shoe-surface interface characteristics using human subjects rather than mechanical surrogate devices.     

Effect of knee musculature on anterior cruciate ligament strain in vivo

Squatting is a commonly prescribed exercise following reconstruction of the anterior cruciate ligament (ACL). The objective of this paper was to measure the in vivo strain patterns of the normal ACL and the load at the knee for the simple squat and for squatting with a “sport cord”. A sport cord is a large elastic rubber tube used for added resistance. Strain patterns were deduced using displacement data from a Hall Effect Strain Transducer (HEST), while joint loads were determined by a mathematical model with inputs from a force plate and electrogoniometers. ACL strain for the free squat in one subject had a maximum of 2% at a knee angle of 10° and was slack for knee angles >17°. In squatting with a sport cord, peak strain was 1% at 10° and was slack at knee angles >14°. Since these peak strains are low, squatting appears to be a safe exercise for conservative rehabilitation of ACL reconstruction patients. In addition, the sport cord is a recommended augmentation to the activity. We believe that the decrease in strain with the sport cord results from added joint stiffness due to greater compressive forces at the tibiofemoral joint. This greater compressive force results from the approximately 10% increase in quadriceps activity. From shear force data predicted by the mathematical model, the maximum anterior drawer force for free squatting (50 N) was considerably less than for sport cord squatting (430 N). Therefore, the value of shear force at the tibiofemoral joint only partially determines the load placed on the ACL.     

Studies on rat liver plasma membrane. Altered protein and phospholipid metabolism after injection of D-galactosamine.

The displacement of NADH from cytoplasmic aldehyde dehydrogenase (EC 1.2.1.3) from sheep liver was studied by using NAD+, 1,10-phenanthroline, ADP-ribose, deamino-NAD+ and pyridine-3-aldehyde-adenine dinucleotide as displacing agents, by following the decrease in fluorescence as a function of time. The data obtained could be fitted by assuming two first-order processes were occurring, a faster process with an apparent rate constant of 0.85 +/- 0.20 s-1 and a relative amplitude of 60 +/- 10% and a slower process with an apparent rate constant of 0.20 +/- 0.05 s-1 and a relative amplitude of 40 +/- 10% (except for pyridine-3-aldehyde-adenine dinucleotide, where the apparent rate constant for the slow process was 0.05 s-1). The displacement rates did not change significantly when the pH was varied from 6.0 to 9.0. Kinetic data are also reported for the dependence of the rate of binding of NADH to the enzyme on the total concentration of NADH. Detailed arguments are presented based on the isolation and purification procedures, the equilibrium coenzyme-binding studies and the kinetic data, which lead to the following model for the release of NADH from the enzyme: (formula: see article). The parameters that best fit the data are: k + 1 = 0.2 s-1; k - 1 = 0.05 s-1; k + 2 = 0.8 s-1 and k - 2 = 5 X 10(5)litre-mol-1-s-1. The slow phase of the NADH release is similar to the steady-state turnover number for substrates such as acetaldehyde and propionaldehyde and appears to contribute significantly to the limitation of the steady-state rate.     

The effects of grip proximity on perceived local in vitro tendon strain

In vitro tensile loadings were performed on a series of sequentially-shortened canine tendon specimens which had been instrumented with mercury strain gages. The purpose of the experiments was to determine the tendon length necessary to ensure that the perceived local strain was effectively independent of the gripping configuration. The results showed that the mercury strain gage outputs exhibited statistically significant departures from initial (long tendon) values only when the tendons were shortened to lengths of less than about eight diameter multiples.     

The failure response of the human cervical facet capsular ligament during facet joint retraction

Studies implicate the cervical facet joint and its capsule as a primary anatomical site of injury during whiplash exposures to the neck. Although the facet joint is known to undergo stretch as the superior vertebra is retracted relative to the inferior vertebra during the whiplash kinematic, the response of the facet capsular ligament and its microstructure during failure in joint retraction is unknown. Polarized light imaging and vector correlation analysis were used to measure the collagen fiber alignment in the human capsular ligament, together with traditional mechanical metrics, during joint retraction sufficient to induce ligament failure. Anomalous fiber realignment occurs at 2.95±1.66mm of displacement, which is not different from the displacement when the ligament first yields (2.77±1.55mm), but is significantly lower (p=0.016) than the displacement at tissue failure (5.40±1.65mm). The maximum principal strain at the first detection of anomalous fiber realignment (0.66±0.39) also is significantly lower (p=0.046) than the strain at failure (1.39±0.64), but is not different from the strains at yield or partial failure. The onset of collagen fiber realignment determined in this study corresponds to the ligament's yielding and supports assertions that the facet capsule can undergo tissue injury during joint retraction. Further, such microstructural responses may indicate tissue damage in the absence of rupture.     

In vivo bone strain in the mandible of Galago crassicaudatus.

Single element foil strain gages were bonded to mandibular cortical bone in eight specimens of Galago crassicaudatus. The gage was bonded below the Pm4 or M2 adjacent to the lower border of the mandible. The bonded strain gage was connected to form one arm of a Wheatstone bridge. Following recovery from the general anesthetic, the restrained Galago bit either a piece of wood, a food object, or a bite force transducer. During these biting episodes, mandibular bone strain deformed the strain gage and the resulting change in electrical resistance of the gage caused voltage changes across the Wheatstone bridge. These changes, directly proportional to the amount of bone strain along the gage site, were recovered by a strip chart recorder. Bone strain was measured on both the working and balancing sides of the jaws. Maximum values of bone strain and bite force were 435 microstrain (compression) and 8.2 kilograms respectively. During bending of the mandible, the correlation between bone strain (tension or compression) and bite force ranged from -0.893 (tension) to 0.997 (compression). The experiments reported here demonstrate that only a small percentage of the Galago bite force is due to balancing side muscle force during isometric unilateral molar biting. In addition, these experiments demonstrate that the Galago mandible is bent in a predictable manner during biting. The amount of apparent mandibular bone strain is dependent on (1) the magnitude of the bite force and (2) the position of the bite point.     

Sedimentation of DNA of Dictyostelium discoideum lysed on alkaline sucrose gradients: role of single-strand breaks in gamma ray lethality of sensitive and resistant strains

The nuclear and mitochondrial DNA of the amoebae of the cellular slime mold Dictyostelium discoideum have been labeled with [methyl-³H]thymidine by allowing them to grow on Escherichia coli 15T^? containing this label in its DNA. Neutral CsCl gradients were used to identify the labeled molecules. Alkaline sucrose sedimentation profiles of cells lysed directly on the gradients revealed two high molecular weight species, one of about 90 S (single-strand mol wt = 1.4 × 10⁸) identified by alkaline CsCl rebanding as nuclear DNA, and another of 43 S (single-strand mol wt = 2.3 × 10⁷), identified as mitochondrial DNA. These alkaline sucrose gradients were used to study the production of single-strand breaks and their rejoining in DNA of a gamma ray-resistant strain (NC-4; 10% survival dose for cell proliferation, D₁₀ = 300 krad) and in two radiation-sensitive daughter mutants (γs-18, D₁₀ = 75 krad; γs-13, D₁₀ = 4 krad). With ⁶⁰Co gamma rays, breaks were produced in nuclear and mitochondrial DNA at an efficiency of one break per 33 eV in all three strains. At doses up to about 100 krad, these single-strand breaks were closed equally well during post-irradiation incubation of NC-4, γs-18 and γs-13, even though their survivals were widely different, indicating no apparent correlation between parental strand rejoining and survival in the sensitive strains. At higher doses, post-irradiation treatment with 1 mg caffeine/ml sensitized NC-4 and retarded strand-rejoining, suggesting that lethality in this resistant strain may be related to strand breaks. It is concluded that single-strand rejoining is a necessary, but not sufficient, condition for radiation survival in this organism. The nature of the apparently unrepaired lesions leading to lethality in the sensitive strains is not known.     

Mice bearing Acads mutation display altered postingestive but not 5-s orosensory response to dietary fat

A previous survey of mouse inbred strains revealed a wide range in self-selected fat intake, from 26 to 83% of energy. The BALB/cByJ strain selected a lower percentage of fat intake (36%) than all other strains tested except for the CAST/Ei. BALB/cByJ mice are deficient in the short-chain acyl-CoA dehydrogenase (SCAD) enzyme due to a spontaneous mutation in Acads. We hypothesized that this deficiency would alter fat appetite and used three behavioral test paradigms to compare the response of BALB/cByKz. Acads -/- and BALB/cByKz. Acads +/+ mice to fat stimuli. First, during 10-day exposure to a macronutrient self-selection diet, Acads -/- mice consumed proportionately less fat and more carbohydrate than Acads +/+ mice, yet total energy intake was similar between strains. Next, in 48-h two-bottle preference tests, Acads +/+ mice displayed a preference for 50% corn oil, but Acads -/- mice did not. Finally, in brief-access taste tests employing successive 5-s presentations of corn oil in an ascending concentration series ending with 50%, there were no effects of strain on total licks, indicating that Acads does not alter acute orosensory response to this fat stimulus. With 15-s presentations, however, the Acads +/+ mice licked more of the 50% oil than Acads -/-, suggesting orosensory effects related to the increased exposure time. In contrast to corn oil, there were no strain differences in licking response to sucrose solution in either the two-bottle or brief-access taste tests. The observation that SCAD-deficient mice display altered postingestive responses to dietary fat provides further evidence for the metabolic control of feeding.     

Intraspecific variability in growth response to cadmium of the wood-rotting fungus Piptoporus betulinus

The intraspecific variability in growth response to cadmium (Cd) on agar media and in liquid culture was studied among fourteen strains of a wood-rotting fungus Piptoporus betulinus. The variability of Cd tolerance was found to be very high. The ED(50) ranged from 6.8 μM Cd in the most sensitive strain, up to 255.1 μM in the most resistant one. On agar media the addition of Cd to nutrient media resulted in reduction of relative growth rate and increased lag time. While the reduction of growth rate was already apparent at 10 μM Cd, the lag time was significantly increased in higher Cd concentrations. Five strains of P. betulinus failed to grow at 250 μM Cd and none grew at 500 μM metal. Biomass production in liquid culture was less sensitive to addition of Cd than the growth rate on solid media. At 100 μM Cd the radial growth rate of the mycelium was reduced to 27%, whereas the dry mass of mycelium was 77% of the respective control value. A group of four Cd-sensitive strains was found, showing low metal tolerance both on solid media and in liquid cultures. Although the isolates originated from sites with different Cd-pollution level, no correlation between level of Cd-pollution and resistance (ED(50)) was found. The growth rate of fourteen tested strains displayed lower variability than biomass production, showing that radial growth rate is more species-specific and therefore more valuable for interspecific comparisons of growth response.     

A comparison of patellofemoral cartilage morphology and deformation in anterior cruciate ligament deficient versus uninjured knees

Anterior cruciate ligament (ACL) deficient patients have an increased rate of patellofemoral joint (PFJ) osteoarthritis (OA) as compared to the general population. Although the cause of post-injury OA is multi-factorial, alterations in joint biomechanics may predispose patients to cartilage degeneration. This study aimed to compare in vivo PFJ morphology and mechanics between ACL deficient and intact knees in subjects with unilateral ACL ruptures. Eight male subjects underwent baseline MRI scans of both knees. They then performed a series of 60 single-legged hops, followed by a post-exercise MRI scan. This process was repeated for the contralateral knee. The MR images were converted into three-dimensional surface models of cartilage and bone in order to assess cartilage thickness distributions and strain following exercise. Prior to exercise, patellar cartilage was significantly thicker in intact knees as compared to ACL deficient knees by 1.8%. In response to exercise, we observed average patellar cartilage strains of 5.4 ± 1.1% and 2.5 ± 1.4% in the ACL deficient and intact knees, respectively. Importantly, the magnitude of patellar cartilage strain in the ACL deficient knees was significantly higher than in the intact knees. However, while trochlear cartilage experienced a mean strain of 2.4 ± 1.6%, there was no difference in trochlear cartilage strain between the ACL deficient and uninjured knees. In summary, we found that ACL deficiency was associated with decreased patellar cartilage thickness and increased exercise-induced patellar cartilage strain when compared to the uninjured contralateral knees.