Studies of the oxovanadium(IV)—oxalate system: syntheses and crystal structures of binuclear (Ph4P)2[(VO)2(H2O)2(C2O4)3]·4H2O and of the one-dimensional chain material, (Ph4P)[VOCl(C2O4)]

The hydrothermal reactions of (Ph₄P)[VO₂Cl₂] and H₂C₂O₄ at 150 and 125°C yield (Ph₄P)₂[V₂O₂(H₂O)₂(C₂O₄)₃]·4H₂O (1) and (Ph₄P)[VOCl(C₂O₄)] (2), respectively. The structure of the molecular anion of 1 consists of a binuclear unit of oxovanadium(IV) octahedra bridged by a bisbidentate oxalate group. The VO₆ coordination geometry at each vanadium site is defined by a terminal oxo group, an aquo ligand, and four oxygen donors — two from the bisbidentate bridging oxalate and two from the terminal bidentate oxalate. The structure of 2 consists of discrete Ph₄P⁺ cations occupying regions between [VOCl(C₂O₄)]⁻_∞ spiral chains. The structure of the one-dimensional anionic chain exhibits V(IV) octahedra bridged by bisbidentate oxalate groups. Crystal data: 1·4H₂O, monoclinic P2₁/n, A = 12.694(3), B = 12.531(3), C = 17.17(3) Å, β = 106.32(2)°, V = 2621.3(13) ų, Z = 2, D_calc = 1.501 g cm⁻³, structure solution and refinement converged at a conventional residual of 0.0518; 2, tetragonal P4₃, A = 12.145(2), C = 15.991(3) Å, V = 2358.7(12) ų, Z = 4, R = 0.0452.     

Synthesis and characterization of trisodium salt of bis(thiosalicylato)aurate(I): Na3[Au(TSA)2]·5H2O

Sodium salt of a water-soluble, anionic, and monomeric 1:2 complex of Au(I) with a dianion of thiosalicylic acid TSA²⁻(Hin2TSA) = o-HS(C₆H₄)COOH) was first prepared and isolated as colorless needle crystals through a stoichiometric reaction of NaAuCl₄:H₂TSA:NaOH = 1:4:8 molar ratio in aqueous/EtOH solution. In this reaction, TSA²⁻ ligand has played a role of a reducing agent for the starting Au(III) ion and also of donor ligands coordinating to the reduced Au(I). This compound was characterized by complete elemental analyses, TG/DTA, FT-IR, 2D-NMR (¹H-¹H COSY, ¹H-¹³C HMBC, and ¹H-¹³C HMQC) spectroscopy, and the molmass measurement based on the cryoscopic method. It was shown that this complex was a monomeric species of Au(I) with a formula of Na₃[Au(TSA)₂]·5H₂O in the solid state, but not a polymeric species even in aqueous solution. A full assignment of seven carbon and four proton resonances in the coordinated TSA²⁻ ligand was achieved by the 2D ¹H-¹³C HMBC NMR technique.     

The synthesis and properties of binuclear pentacyanoiron(III)-μ-cyano- amminetetracyanoiron(III) [(C6H5)4P]4[(NC)5Fe---NC---Fe(CN)4NH3]·6H2O

The binuclear cyanoferrate, tetraphenylphosphonium pentacyanoiron(III)-μ-cyano-amminetetracyanoiron(III), [(C₆H₅)₄P]₄[Fe₂(CN)₁₀NH₃]⁴⁻, was synthesized by air oxidation of aqueous solutions of Na₃[Fe(CN)₅NH₃] · 3H₂O. Single crystal X-ray diffraction studies show the compound to contain the binuclear, cyano-bridged anion, [(NC)₅Fe---NC---Fe(CN)₄NH₃]⁴⁻. This compound is structurally identical to the one prepared by A. Ludi et al., [Inorg. Chim. Acta, 34, 113 (1979)], with the exception that [Fe(CN)₆]³⁻ is not required for the synthesis of this compound. The Fe(III) atoms are antiferromagnetically coupled through the CN⁻ bridge, as shown by a maximum in the magnetic susceptibility at 50 K. The electronic and IR spectra of the complex in the solid state and in solution are discussed.     

Crystal growth in aqueous hydrofluoric acid and (HF)x · pyridine solutions: syntheses and crystal structures of [Ni(H2O)6][MF6] (M = Ti, Zr, Hf) and Ni3(py)12F6 · 7H2O

The syntheses and structures of [Ni(H₂O)₆]²⁺[MF₆]²⁻ (M = Ti,Zr,Hf) and Ni₃(py)₁₂F₆·7H₂O are reported. The former three compounds are isostructural, crystallizing in the trigonal space group (No. 148) with Z = 3. The lattice parameters are a = 9.489(4), C = 9.764(7) Å, with V = 761(1) ų for Ti; a = 9.727(2), C = 10.051(3) Å, with V = 823.6(6) ų for Zr; and a = 9.724(3), C = 10.028(4)Å, with V = 821.2(8)ų for Hf. The structures consist of discrete [Ni(H₂O)₆]²⁺ and [MF₆]²⁻ octahedra joined by O---HF hydrogen bond Large single crystals were grown in an aqueous hydrofluoric acid solution. Ni₃(py)₁₂F₆·7H₂O crystallizes in the monoclinic space group I2/a (No. 15) with Z = 4. The lattice parameters are a = 16.117(4), B = 8.529(3), C = 46.220(7) Å, β = 92.46(2)°, and V = 6348(5) ų. The structure consists of discrete Ni(py)₄F₂ octahedra linked through H---O---HF and H---O---HO hydrogen bonding interactions. Single c were grown from a (HF)_x·pyridine/pyridine/water solution.     

Charge-transfer complexes of benzylviologen (1,1′-dibenzyl-4,4′-bipyridinium(2+) cation) with cyanocuprate(I) and the structure of (BzV)3Cu9(CN)15·H2O

Reactions between 1,1′-dibenzyl-4,4′-bipyridinium(2+) (benzylviologen, BzV) chloride and cyanocuprates(I) gave two charge-transfer complexes having different colors: dark brown (BzV)₃Cu₉(CN)₁₅·H₂O and light brown (BzV)Cu(CN)₃·2H₂O. An X-ray crystal analysis of the former compound showed that nine crystallographically nonequivalent Cu atoms form three kinds of triad ---Cu---(CN)---Cu--- screws, which are linked by CN groups resulting in a unique three-dimensional network structure. Three of the nine Cu atoms have distorted tetrahedral (td) coordination geometries while the others have triangular plane (tp) geometries. Each screw consists of a (-tp-td-tp-)_n array. There are three crystallographically nonequivalent viologen molecules. Certain CuCN moieties are located above a viologen ring or by the side of a viologen ring, with close interatomic contacts. These close contacts are characteristic of the charge-transfer complex and are responsible for the deep color of the complex.     

Synthesis and characterization of SrCu2(O2CR)3(bdmap)3 and Bi2(O2CCH3)4(bdmap)2(H2O) (R = CH3, CF3; bdmap = 1,3-bis(dimethylamino)-2-propanolato)

New mixed metal complexes SrCu₂(O₂CR)₃(bdmap)₃ (R = CF₃ (1a), CH₃ (1b)) and a new dinuclear bismuth complex Bi₂(O₂CCH₃)₄(bdmap)₂(H₂O) (2) have been synthesized. Their crystal structures have been determined by single-crystal X-ray diffraction analyses. Thermal decomposition behaviors of these complexes have been examined by TGA and X-ray powder diffraction analyses. While compound 1a decomposes to SrF₂ and CuO at about 380°C, compound 1b decomposes to the corresponding oxides above 800°C. Compound 2 decomposes cleanly to Bi₂O₃ at 330°C. The magnetism of 1a was examined by the measurement of susceptibility from 5–300 K. Theoretical fitting for the susceptibility data revealed that 1a is an antiferromagnetically coupled system with g = 2.012(7), −2J = 34.0(8) cm⁻¹. Crystal data for 1a: C₂₇H₅₁N₆O₉F₉Cu₂Sr/THF, monoclinic space group P2₁/m, A = 10.708(6), B = 15.20(1), C = 15.404(7) Å, β = 107.94(4)°, V = 2386(2) ų, Z = 2; for 1b: C₂₇H₆₀N₆O₉Cu₂Sr/THF, orthorhombic space group Pbcn, A = 19.164(9), B = 26.829(8), C = 17.240(9) Å, V = 8864(5) ų, Z = 8; for 2: C₂₂H₄₈O₁₁N₄Bi₂, monoclinic space group P2₁/c, A = 17.614(9), B = 10.741(3), C = 18.910(7) Å, β = 109.99(3)°, V = 3362(2) ų, Z = 4.     

Structural determinations, magnetic and EPR studies of complexes involving the Cr(OH)2Cr unit

Five heterometallic compounds with formulae [Ba(H₂O)₄Cr₂(μ-OH)₂(nta)₂] · 3H₂O (I), [M(bpy)₂(H₂O)₂] [Cr₂(OH)₂(nta)₂] · 7H₂O, where M²⁺ = Zn, (II); Ni, (III); Co, (IV) and [Mn(H₂O)₃(bpy)Cr₂(OH)₂(nta)₂] · (bpy) · 5H₂O (V); bpy = 2,2′-bipyridine, (nta = nitrilotriacetate ion) have been prepared by reaction of I with the corresponding M^II-sulfates in the presence of 2,2′-bipyridine. Substances I–V have been characterized by magnetic susceptibility measurements, EPR and X-ray determinations. I represents a 2D coordination polymer formed by coordination of centrosymmetrical dimeric chromium(III) units and Barium cations. The 10-coordinate Ba polyhedron is completed by four water molecules. Compounds II–IV are isostructural and consist of non-centrosymmetric dimeric anions [Cr₂(μ-OH)₂(nta)₂]²⁻, complex cations [M^II(bpy)₂(H₂O)₂]²⁺ and solvate water molecules. The octahedral coordination of chromium atoms implies four donor atoms of the nta³⁻ ligands and two bridging OH groups. Multiple hydrogen bonds of coordinated and solvate water molecules link anions and cations in a 3D network. A similar [Cr₂(μ-OH)₂(nta)₂]²⁻ unit is found in V. The bridging function is performed by a carboxylate oxygen atom of the nta ligand that leads to the formation of a trinuclear complex [Mn(bpy)(H₂O)₂Cr₂(μ-OH)₂(nta)₂]. Experimental and calculated frequency and temperature dependences of EPR spectra of these compounds are presented. The fine structure appearing on the EPR spectra of compound V is analyzed in detail at different temperatures. It is established that the main part of the EPR signals is due to the transitions in the spin states of a spin multiplet with S = 2. Analyses of experimental and calculated spectra confirm the absence of interaction between metal ions (M^II) and Cr-dimers in complexes III and IV and the presence of weak Mn–Cr interactions in V. The temperature dependence of magnetic susceptibilities for I–V was fitted on the basis of the expression derived from isotropic Hamiltonian including a bi-quadratic exchange term.     

Synthesis, crystal structure and magnetic properties of the first structurally characterized 1,2-dithiocroconato-containing Cu(II) complex, [Cu(bpca)(H2O)]2[Cu(1,2-dtcr)2]·2H2O

The first crystal and molecular structure of a transition metal complex containing 1,2-dithiocroconate (1,2-dtcr, dianion of 1,2-dimercaptocylopent-1-ene-3,4,5-trione), [Cu(bpca)(H₂O)]₂[Cu(1,2-dtcr)₂]·2H₂O (where bpca is the bis(2-pyrdidylcarbonyl)amide anion), has been determined by single crystal X-ray diffraction methods. The compound crystallizesin the monoclinic syste, space group P2₁/c, with a = 11.661(3), b = 20.255(6), c = 8.265(3) Å, ß = 107.26(2)° and Z = 2. The structure is formally built of [Cu(1,2-dtcr)₂]²⁻ and [Cu(bpca)(H₂O)]⁺ ions and water of hydration. The copper atom of the anion is situated at a crystallographic inversion centre, bonded to four sulfur atoms in a planar, approximately square arrangement. In the cation the copper equatorial plane is formed by the three nitrogen atoms of the bpca ligand and a water oxygen atom. In addition there is a very weak axial bond to one of the sulfur atoms of a 1,2-dtcr ligand in the anion. Through these latter weak bonds each anion is connected to, and sandwiched between, two cations, resulting in neutral, trinuclear, centrosymmetric formula units. The triple-decker molecules are arranged in stacks along the crystallographic a-axis creating close contacts between the terminal copper atoms and bpca groups of the neighbouring molecules. This intermolecular interaction is, however, too weak to define the structure as a chain compound. The distance between adjacent copper atoms within the trinuclear unit is 4.189(1) Å, while the shortest intra-stack metal-metal separation between terminal copper atoms is 5.281(1) Å. Variable-temperature magnetic susceptibility measurements in the temperature r.2–140 K reveal that a Curie law is followed; with three non-interacting copper(II) ions in the formula unit.     

Interactions between thiamine and large anions. Crystal structures of (H-thiamine)[Pt(SCN)4] · 3H2O and (H-thiamine)[Pt(SCN)6] · H2O

The reaction of thiamine with K₂Pt^IICl₄ and with Pt^IVCl₄ in the presence of excess NaSCN in aqueous solution gave thiamine salts, (H-thiamine)[Pt(SCN)₄] · 3H₂O (1) and (H-thiamine)[Pt(SCN)₆] · H₂O (2), respectively, structures of which have been determined by X-ray diffraction. The thiamine molecule adopts the usual F conformation in each salt. In 1, [Pt(SCN)₄]²⁻ ions act as large planar spacers in the crystal lattice and interact scarcely with thiamine, except for a hydrogen bonding with the terminal hydroxy O(5γ). Instead, water molecules form two types of host–guest-like interactions with the pyrimidine and the thiazolium moieties of a thiamine molecule, one being a C(2)–Hwaterpyrimidine bridge and the other being an N(4′)–Hwaterthiazolium bridge. In 2, despite the much larger ion size, octahedral [Pt(SCN)₆]²⁻ ions form a C(2)–Hanionpyrimidine bridge and an N(4′)–Hanionthiazolium bridge. An additional hydrogen bonding between the anion and the terminal O(5γ) of thiamine creates a hydrogen-bonded macrocyclic ring {thiaminium–[Pt(SCN)₆]²⁻}₂, a supramolecule.     

Mg-activated double-stranded DNA cleavage by [(bpy)2(OH2)Ru---O---Ru(H2O) (bpy)2]

The reaction of the title complex with DNA has been examined. Addition of [(bpy)₂(OH₂)RuORu(OH₂) (bpy)₂]⁴⁺ to DNA leads to the reduction of the complex to Ru(bpy)₂(OH₂)₂²⁺, as indicated by absorption spectroscopy and cyclic voltammetry. The reaction is accelerated by Mg²⁺. The combined evidence points to a mechanism where the oxo-bridged dimer is hydrolyzed to a monomeric Ru(III) complex that is capable of oxidizing DNA to effect strand scission. Gel electrophoresis demonstrates nicking of supercoiled /gfX174 DNA by [(bpy)₂(OH₂)RuORu(OH₂) (bpy)₂]⁴⁺, and double-stranded cleavage is observed in the presence of Mg²⁺. Linearization of the plasmid prior to treatment with the complex does not lead to further fragmentation, suggesting that supercoiling is required to realize double-stranded cleavage.     

Syntheses, spectra and crystal structures of ruthenium(II) complexes with polypyridyl: [Ru(bipy)2(phen)](ClO4)2 · H2O and [Ru(bipy)2(Me-phen)](ClO4)2

Two ruthenium(II) complexes with polypyridyl, Ru(bipy)₂(phen)](ClO₄)₂·H₂O (1) and [Ru(bipy)₂(Me-phen)](ClO₄)₂ (2), (phen = 1,10-phenanthroline, bipy = 2,2′-bipyridine, Me-phen = 5-methyl-1,10-phenanthroline), were synthesized and characterized by IR, MS and NMR spectra. Their structures were determined by single crystal X-ray diffraction techniques. The strong steric interaction between the polypyridyl ligands was relieved neither by the elongation of the Ru---N bonds nor increase of the N---Ru---N bite angles. The coordination sphere was distorted to relieve the ligand interaction by forming specific angles (δ) between the polypyridyl ligand planes and coordination planes (N---Ru---N), and forming larger twisted angles between the two pyridine rings for each bipy. The bond distances of Ru---N(bipy) and Ru---N(phen) were virtually identical with experimental error, as expected of π back-bonding interactions which statistically involve each of the ligands present in the coordination sphere.     

Mixed anion lanthanide(III) crown ether complexes: crystal structures of [LaCl2(NO3)(12-crown-4)]2, [La(NO3)(OH2)4-(12-crown-4)]Cl2·CH3CN and [LaCl2(NO3)(18-crown-6)]

Reaction of LaCl₃·7H₂O containing small amounts of La(NO₃)₃·7H₂O as an impurity with 12-crown-4 or 18-crown-6 in 3:1 CH₃CN:CH₃OH resulted in the isolation of the mixed anion complexes [LaCl₂(NO₃)(12-crown-4)]₂, [La(NO₃)(OH₂)₄(12-crown-4)]Cl₂·CH₃CN and [LaCl₂(NO₃)(18-crown-6)]. The nine-coordinate dimer, [LaCl₂(NO₃)(12-crown-4)]₂, has all of the anions in the inner coordination sphere and La³⁺ has a capped square antiprismatic geometry. It crystallizes in the orthorhombic space group Pbca with (at −150 °C) a = 12.938(6), B = 15.704(3), C = 13.962(2) Å, and D_calc = 2.08 g cm⁻³ for Z = 4. The second complex isolated from the same reaction, [La(NO₃)(OH₂)₄(12-crown-4)]Cl₂·CH₃CN, has the bidentate nitrate anion in the inner coordination sphere but the two chloride anions are in a hydrogen bonded outer sphere. This complex is ten-coordinate 4A,6B-expanded dodecahedral and crystallizes in the monoclinic space group P2₁ with (at 20 °C) A = 7.651(2), B = 11.704(7), C = 11.608(4) Å, β = 95.11(2)°, and D_calc = 1.80 g cm⁻³ for Z = 2. The 18-crown-6 complex, [LaCl₂(NO₃)(18-crown-6)], has all inner sphere anions and has ten-coordinate 4A,6B-expanded dodecahedral La³⁺ centers. It crystallizes in the orthorhombic space group Pbca with (at 20 °C) a = 14.122(7), B = 13.563(5), C = 19.311(9) Å, and D_calc = 1.89 g cm⁻³ for Z = 8.     

Catalytic and electrochemical properties of new manganese(III) compounds of 2-(2′-hydroxyphenyl)-oxazoline (Hphox or HClphox). Molecular structures of [Mn(Clphox)2(MeOH)2](ClO4) and [Mn(phox)2(MeOH)2][Mn(phox)2(ClO4)2](H2O)2

New manganese(III) complexes of Hphox (2-(2′-hydroxyphenyl)-oxazoline) and HClphox (2-(5′-chloro-2′-hydroxyphenyl)-oxazoline) have been synthesised. The X-ray structures of [Mn(phox)₂(MeOH)₂][Mn(phox)₂(ClO₄)₂](H₂O)₂ and [Mn(Clphox)₂(MeOH)₂](ClO₄) show the manganese(III) ions to be octahedrally coordinated with methanol or perchlorate at the axial coordination sites. The cyclic voltammograms of the complexes, with the exception of [Mn(phox)₂(acac)] (Hacac=2,4-pentanedione), show an irreversible reduction wave of manganese(III) to manganese(II). After addition of an excess of 1-methylimidazole (1-Meim), the reduction process shifts towards lower potentials and becomes (quasi-) reversible, indicating that the presence of 1-Meim affects the catalytic efficiency of the complexes. The complexes catalyse the epoxidation of styrene by dihydrogen peroxide. The cumulative turnover numbers towards styrene oxide obtained after 15 min. vary from 16 for [Mn(Clphox)₂(MeOH)₂](ClO₄) to 26 for [Mn(phox)₂(acac)]. Ligand degradation appears to be the limiting factor for obtaining higher turnover numbers.     

Synthesis, magnetism and crystal structure of [V2O2(μ-OH)2(tpen)]I2·4H2O; a binuclear complex containing the syn-{VO(μ-OH)2VO} core (tpen = tetrakis(2-pyridylmethyl)ethylenediamine)

The reaction of N,N,N′,N′-tetrakis(2-pyridylmethyl)ethylenediamine (tpen) with VCl₃ in CH₃CN yields Cl₃V(tpen)VCl₃ which was hydrolyzed in water in the presence of oxygen affording [V₂O₂(μ-OH)₂(tpen)]I₂·2H₂O, the crystal structure of which has been determined. Asyn-{OV(μ-OH)₂VO}²⁺ core has been identified where the V(IV) centers are antiferromagnetically coupled (J = −150 cm⁻¹;g = 1.80).     

Electrospray mass spectrometry of trans-[Ru(NO)Cl(dpaH)2] (dpaH=2,2′-dipyridylamine) and ‘caged NO’, [RuCl3(NO)(H2O)2]: loss of HCl and NO from positive ions versus NO and Cl from negative ions

The positive ion electrospray mass spectrometry (ESI-MS) of trans-[Ru(NO)Cl)(dpaH)₂]Cl₂ (dpaH=2,2′-dipyridylamine), obtained from the carrier solvent of H₂O–CH₃OH (50:50), revealed 1+ ions of the formulas [Ru^II(NO⁺)Cl(dpaH)(dpa)]⁺ (m/z=508), [Ru^IIICl(dpaH)(dpa⁻)]⁺ (m/z=478), [Ru^II(NO⁺)(dpa)₂]⁺ (m/z=472), [Ru^III(dpa)₂]⁺ (m/z=442), originating from proton dissociation from the parent [Ru^II(NO⁺)Cl(dpaH)₂]²⁺ ion with subsequent loss of NO (17.4% of dissociative events) or loss of HCl (82.6% of dissociative events). Further loss of NO from the m/z=472 fragment yields the m/z=442 fragment. Thus, ionization of the NH moiety of dpaH is a significant factor in controlling the net ionic charge in the gas phase, and allowing preferential dissociation of HCl in the fragmentation processes. With NaCl added, an ion pair, {Na[Ru^II(NO)Cl(dpa)₂]}⁺ (m/z=530; 532), is detectable. All these positive mass peaks that contain Ru carry a signature ‘handprint’ of adjacent m/z peaks due to the isotopic distribution of ¹⁰⁴Ru, ¹⁰²Ru, ¹⁰¹Ru, ⁹⁹Ru, ⁹⁸Ru and ⁹⁶Ru mass centered around ¹⁰¹Ru for each fragment, and have been matched to the theoretical isotopic distribution for each set of peaks centered on the main isotope peak. When the starting complex is allowed to undergo aquation for two weeks in H₂O, loss of the axial Cl⁻ is shown by the approximately 77% attenuation of the [Ru^II(NO⁺)Cl(dpaH)(dpa)]⁺ ion, being replaced by the [Ru^II(NO⁺)(H₂O)(dpa)₂]⁺ (m/z=490) as the most abundant high-mass species. Loss of H₂O is observed to form [Ru^II(NO⁺)(dpa)₂]⁺ (m/z=472). No positive ion mass spectral peaks were observed for RuCl₃(NO)(H₂O)₂, ‘caged NO’. Negative ions were observed by proton dissociation forming [Ru^II(NO)Cl₃(H₂O)(OH)]⁻ in the ionization chamber, detecting the parent 1− ion at m/z=274, followed by the loss of NO as the main dissociative pathway that produces [Ru^IIICl₃(H₂O)(OH)]⁻ (m/z=244). This species undergoes reductive elimination of a chlorine atom, forming [Ru^IICl₂(H₂O)(OH)]⁻ (m/z=208). The ease of the NO dissociation is increased for the negative ions, which should be more able to stabilize a Ru^III product upon NO loss.     

Thermal and photochemical substitution reactions of CpRe(PPh3)2H2 and CpRe(PPh3)H4. Catalytic insertion of ethylene into the C-H bond of benzene

The thermal and photochemical reactions of CpRe(PPh₃)₂H₄ and CpRe(PPh₃)H₄ (Cp = η⁵-C₅H₅) with PMe₃, P(p-tolyl)₃, PMe₂Ph, DMPE, DPPE, DPPM, CO, 2,6-xylylisocyanide and ethylene have been examined. While CpRe(PPh₃)₂H₂ is thermally inert, it will undergo photochemical substitution of one or two PPh₃ ligands. With ethylene, substitution is followed by insertion of the olefin into the C-H bond of benzene, giving ethylbenzene. CpRe(PPh₃)H₄ undergoes thermal loss of PPh₃, which leads to substituted products of the type CpRe(L) H₄. Photochemically, reductive elimination of dihydrogen occurs preferentially. The complex trans-CpRe(DMPE)H₂ was structurally characterized, crystallizing in the monoclinic space group P2₁/n (No. 14) with a = 6.249(6), b = 16.671(8), c = 13.867(7) Å, β = 92.11(6)°, V = 1443.7(2.9) Å and Z = 4. The complex trans-CpRe(PMe₂Ph)₂H₂ was structurally characterized, crystallizing in the monoclinic space group P2₁/n (No. 14) with a = 7.467(3), b = 23.874(14), c = 11.798(6) Å, β = 100.16(4)°, V = 2070.2(3.4) ų and Z = 4.     

The crystal and molecular structures of lithium trimethylenediaminetetraacetatoferrate(III) trihydrate Li[Fe(trdta)]·3H2O and sodium ethylenediamine-N,N′-diacetato-N,N′-di-3-propionatoferrate(II) pentahydrate Na[Fe(eddda)]·5H2O

The crystal structures of Li[Fe(trtda)]·3H₂O and Na[Fe(eddda)]·5H₂O (trtda = trimethylenediaminetetraacetate and eddda = ethylenediamine-N,N′-diacetate-N,N′-di-3-propionate) have been determined by single crystal X-ray diffraction techniques. The former crystal was monoclinic with the space group P2₁/n,a = 17.775(3),b = 10.261(1),c = 8.883(2)Å, β = 95.86(4)° and Z = 4. The latter was also monoclinic with the space group P2₁/n,a = 6.894(2),b = 20.710(6),c = 13.966(3)Å, β = 101.44(2)° and Z = 4. Both complex anions were found to adopt an octahedral six-coordinated structure with all of six ligand atoms of trdta⁴⁻ or eddda⁴⁻ coordinated to the Fe(III) ion, unlike the corresponding edta⁴⁻ complex which is usually seven-coordinate with the seventh coordination site occupied by H₂O. Of the three geometrical isomers possible for the eddda complex, the trans(O₅) isomer was actually found in the latter crystal. Factors determining the structural types of metal–edta complexes are discussed in detail.     

Copper(II) complexes with (2-hydroxybenzyl-2-pyridylmethyl)amine–Hbpa: syntheses, characterization and crystal structures of the ligand and [Cu(II)(Hbpa)2](ClO4)2·2H2O

Copper(II) complexes were synthesized and characterized by means of elemental analysis, IR and visible spectroscopies, EPR and electrochemistry, as well as X-ray structure crystallography. The group consists of discrete mononuclear units with the general formula [Cu(II)(Hbpa)₂](A)₂·nH₂O, where Hbpa=(2-hydroxybenzyl-2-pyridylmethyl)amine and A=ClO₄ ⁻, n=2 (1), CH₃COO⁻, n=3 (2), NO₃ ⁻, n=2 (3) and SO₄ ²⁻, n=3 (4). The structures of the ligand Hbpa and complex 1 have been determined by X-ray crystallography. Complexes 1–4 have had their UV–Vis spectra measured in both MeCN and DMF. It was observed that the compounds interact with basic solvents, such that molecules coordinate to the metal in axial positions in which phenol oxygen atoms are coordinated in the protonated forms. The values were all less than 1000 M⁻¹ cm⁻¹. EPR measurements on powdered samples of 1–3 gave g/A values between 105 and 135 cm⁻¹, typical for square planar coordination environments. Complex 4·3H₂O exhibits a behaviour typical for tetrahedral coordination. The electrochemical behaviour for complexes 1 and 2 was studied showing irreversible redox waves for both compounds.     

The ReH6[P(C6H5)3]2 ion as a ligand: complexes with M(CO)3 fragments (M = Cr, Mo, W)

The reactions of [(H₅C₆)₃P]₂ReH₆⁻ with (CH₃CN)₃Cr(CO)₃, (diglyme)Mo(CO)₃ or (C₃H₇CN)₃W(CO)₃ led to the formation of [(H₅C₆)₃P]₂ReH₆M(CO)₃⁻ (M = Cr, Mo, W) complexes. These have been characterized by IR and NMR spectroscopies, as well as elemental analyses. A single crystal X-ray diffraction study has also been carried out for the M = Cr complex as a K(18-crown-6)⁺ salt. The complex crystallizes as a THF monosolvate in the monoclinic space group P2₁/n with a = 22.323(6), B = 9.523(2), C = 27.502(5) Å, β = 104.98(2)⁰ and V = 5648 ų for Z = 4. The Re---Cr separation is 2.5745(12) Å, and the two phosphine ligands are oriented unsymmetrically. Although the hydride ligands were not found, the presence of three bridging hydrides and a dodecahedral coordination geometry about rhenium could be inferred. Low temperature ¹H and ³¹P NMR spectroscopic studies did not reveal the low symmetry of the solid state structure.     

Five-coordinate rhenium(III)-thiolato complexes: the structure of [Re(SCH2PhOCH3)3(PPh3)2]

A novel five-coordinate rhenium(III)-thiolato complex, Re(SCH₂C₆H₄OCH₃-p)₃(PPh₃)₂ has been isolated during the reaction of trans-ReOCl₃(PPh₃)₂ with p-methoxybenzyl mercaptan. In the unexpected structure that was acquired, the central metal has undergone a reduction from Re(V) to Re(III). The five-coordinate Re(III) complex has been characterized by spectroscopic methods, elemental analysis and X-ray crystallography. X-ray crystallographic studies showed the coordination geometry around rhenium to be that of a trigonal bipyramid. The basal plane is defined by three sulfur atoms of the monodentate ligand, while the two apical positions are occupied by two phosphines of the precursor.