Synthesis and properties of pullulan acetate. Thermal properties, biodegradability, and a semi-clear gel formation in organic solvents

Pullulan acetate (AcPL) with various degree of substitution (DS: 1.0–3.0) was synthesized by the reaction of pullulan with acetyl chloride in the presence of pyridine. The product was characterized by gel permeation chromatography (GPC), infra-red (IR) and ¹H NMR spectroscopy. The weight average molecular weights of the products did not decrease less than 190,000 (GPC) in the acetylation reaction. Thermogravimetric analysis (TGA) revealed that AcPL has a higher decomposition temperature (306–363 °C) than unmodified pullulan (295 °C). Differential scanning calorimetry analysis (DSC) revealed that all the AcPLs exhibit a clear T_g, which decreased with increasing DS value in the range of DS 1.0–2.4. The AcPL with DS 2.4 showed the lowest T_g (153 °C), and the AcPL with DS 3.0 had a slightly higher T_g (163 °C). Tensile modulus of AcPL films was comparable to that of a popular cellulose acetate film. The biodegration rate of AcPL decreased with increasing degree of acetylation. The AcPL with DS 3.0 was found to form a semi-clear gel in organic solvents such as dimethyl sulfoxide (DMSO), N,N-dimethylformamide (DMF), and 1,4-dioxane.     

Carboxypeptidase Y-Catalyzed Reaction in Systems Containing Organic Solvent

The effect of organic solvents on carboxypeptidase Y (a serine carboxypeptidase from yeast)-catalyzed hydrolysis of amino acid ester and peptide synthesis from N-acyl amino acid ester and amino acid amide was investigated.

The K_m value of ester hydrolysis increased with an increase in the solvent content. Dioxane was the most effective and dimethyl sulfoxide (DMSO) the least, whilst K_cat showed a tendency to increase slightly in N, N-dimethylformamide (DMF) and DMSO. For dioxane and acetonitrile (MeCN) a maximum was observed.

In peptide formation from Fua-Phe-OEt and Gly-NH₂, dioxane and MeCN supported high product yield at molar fractions smaller than ca. 0.05 but the yield decreased significantly at higher fractions, although a relatively constant selectivity (ratio of the peptide bond formed to the ester consumed) was maintained. DMSO gave rather low peptide yields and selectivity even at lower molar fractions. DMF showed an intermediate tendency.

An apparent saturation parameter of the amine component was evaluated and the dissociation constant of a complex between acyl-enzyme and amino acid amide (K_n), as well as the rate constant of aminolysis exerted by the amino acid amide bound correctly on the enzyme (K_n), was calculated by initial rate analysis of peptide formation. In contrast to K_m values, K_n decreased with increasing concentrations of organic cosolvent. while a suppressive effect was observed (except for DMSO) on the K_n parameter.

Effects of the solvent practically immiscible in water was also studied by use of the enzyme physically “immobilized” on glass beads.     

溶剂稳定性蛋白酶产生菌的筛选和鉴定

自油污土样等样品中分离获得一株具有产胞外溶剂稳定性蛋白酶的耐有机溶剂极端微生物,经BIOLOG系统鉴定及16S rDNA序列(GenBank,EF105377)分析,该菌株为Bacillus licheniformis YP1。该菌株能耐受中浓度盐、强碱性环境(pH12)及多种不同浓度的有机溶剂,但对多种抗生素敏感。在YP1产蛋白酶发酵过程中添加各种有机溶剂结果表明,丙酮虽抑制了菌体生物量的生长却促进了单位菌体的蛋白酶分泌,而长链烷醇如辛醇、十二醇等能强烈抑制该蛋白酶的分泌。该菌株所产蛋白酶经11种50%(V/V)有机溶剂处理后均能保留高活力。该溶剂稳定性蛋白酶在有机相生物催化等领域具有良好的应用前景。     

Mitochondrial morphology and function impaired by dimethyl sulfoxide and dimethyl Formamide

In this work, the effects of two non-ionic, non-hydroxyl organic solvents, dimethyl sulfoxide (DMSO) and dimethyl formamide (DMF) on the morphology and function of isolated rat hepatic mitochondria were investigated and compared. Mitochondrial ultrastructures impaired by DMSO and DMF were clearly observed by transmission electron microscopy. Spectroscopic and polarographic results demonstrated that organic solvents induced mitochondrial swelling, enhanced the permeation to H⁺/K⁺, collapsed the potential inner mitochondrial membrane (IMM), and increased the IMM fluidity. Moreover, with organic solvents addition, the outer mitochondrial membrane (OMM) was broken, accompanied with the release of Cytochrome c, which could activate cell apoptosis signaling pathway. The role of DMSO and DMF in enhancing permeation or transient water pore formation in the mitochondrial phospholipid bilayer might be the main reason for the mitochondrial morphology and function impaired. Mitochondrial dysfunctions induced by the two organic solvents were dose-dependent, but the extents varied. Ethanol (EtOH) showed the highest potential damage on the mitochondrial morphology and functions, followed by DMF and DMSO.     

Control of the nitrile-hydrolyzing enzyme activity in Rhodococcus rhodochrous IFO 15564: preferential action of nitrile hydratase and amidase depending on the reaction condition factors and its application to the one-pot preparation of amides from aldehydes

The reaction conditions towards the preferential action of either nitrile hydratase or amidase in the harvested whole cells of Rhodococcus rhodochrous IFO 15564 were elaborated. The amidase showed higher heat tolerance than the nitrile hydratase and, at 45 °C the amidase worked exclusively. DMSO assisted the preferential action of nitrile hydratase, however, at more than 30% (v/v) addition of DMF, the nitrile hydratase activity was completely lost and only amidase worked. A one-pot chemo-enzymatic conversion of aldehydes to amides [(1) aq. NH₃, I₂, DMSO; (2) Na₂S₂O₃; (3) harvested cells of R. rhodochrous] was established. Under these reaction conditions, most of the amidase was lost, and the incubation of the firstly formed intermediates, nitriles in aq. NH₃ was responsible for the selective inhibition of amidase. The freezing of harvested cells in an exhaustively deionized environment provided a long-term preservable “ready to use” for the organic chemist.     

Synthesis of UV-curable chitosan derivatives and palladium (II) adsorption behavior on their UV-exposed films

Novel chitosan derivatives with UV-curable functional groups, such as 3-methoxy-4-(2-hydroxy-3-methacryloyloxypropoxy)benzyl, 3,4-bis(2-hydroxy-3-methacryloyloxypropoxy)benzyl, 3-methoxy-4-methacryloyloxybenzyl, and 3,5-dimethacryloyloxybenzyl groups, were prepared. Introduction of photosensitive functional groups to chitosan was accomplished by reductive N-alkylation via Schiff’s bases using corresponding photosensitive aldehydes. Compared to starting chitosan, UV-curable chitosan derivatives showed better solubility in several organic solvents, such as DMSO and 70% methacrylic acid. The solubility of these compounds increased with an increase in the degree of substitution of the N-alkyl side chains. After UV irradiation for 20 s under a high-pressure mercury lamp at a distance of 15 cm from the samples, acidic methanol solutions of these derivatives were transformed to gels in the presence of photo-initiator, and their dried films adsorbed palladium (II) at pH 1.1 and pH 5.3. The UV-curable chitosan derivatives were successfully used as coating materials for electroless plating on non-conductive substances.     

In Vitro Phenotypic Alteration of Human Melanoma Cells Induced by Differentiating Agents: Heterogeneous Effects on Cellular Growth and Morphology,Enzymatic Activity,and Antigenic Expression

Sodium butyrate (butyrate), 5-azacytidine (5Aza-C), dimethyl sulfoxide (DMSO), and dimethyl formamide (DMF) were applied to a human melanoma cell line for the purpose of inducing pigmentation and terminal differentiation. The results are summarized as follows: 1) butyrate, DMSO, and DMF had a strong cytostatic effect, arresting cells in the G₁ phase of the cycle; 2) butyrate caused a morphological change to spindle shape whereas DMSO and DMF produced rounded cells, without affecting the levels of vimentin and intermediate filaments; 3) tyrosinase activity and melanization were stimulated by DMSO and DMF but not by butyrate; 4) butyrate induced several membrane-bound enzyme activities (alkaline phosphatase and -γ-glutamyl transpeptidase); 5) changes in the expression of antigens related to tyrosinase activity (2B7 and 5C12) only partly corresponded to the changes in enzyme activity; 6) expression of the melanosomal B863 antigen was decreased by butyrate, DMSO, and DMF; and 7) the action of DMF resembled that of DMSO whereas 5Aza-C had little effect. The results indicate that these differentiating agents activate different sets of genes, the melanogenic pathway being activated independently of -γ-glutamyltranspeptidase. The down regulation of B8G3 antigen by these agents may provide a common focus for understanding the essential action of differentiation inducers in melanoma cells.     

In vitro phenotypic alteration of human melanoma cells induced by differentiating agents: heterogeneous effects on cellular growth and morphology, enzymatic activity, and antigenic expression.

Sodium butyrate (butyrate), 5-azacytidine (5Aza-C), dimethyl sulfoxide (DMSO), and dimethyl formamide (DMF) were applied to a human melanoma cell line for the purpose of inducing pigmentation and terminal differentiation. The results are summarized as follows: 1) butyrate, DMSO, and DMF had a strong cytostatic effect, arresting cells in the G1 phase of the cycle; 2) butyrate caused a morphological change to spindle shape whereas DMSO and DMF produced rounded cells, without affecting the levels of vimentin and intermediate filaments; 3) tyrosinase activity and melanization were stimulated by DMSO and DMF but not by butyrate; 4) butyrate induced several membrane-bound enzyme activities (alkaline phosphatase and gamma-glutamyl transpeptidase); 5) changes in the expression of antigens related to tyrosinase activity (2B7 and 5C12) only partly corresponded to the changes in enzyme activity; 6) expression of the melanosomal B8G3 antigen was decreased by butyrate, DMSO, and DMF; and 7) the action of DMF resembled that of DMSO whereas 5Aza-C had little effect. The results indicate that these differentiating agents activate different sets of genes, the melanogenic pathway being activated independently of gamma-glutamyltranspeptidase. The down regulation of B8G3 antigen by these agents may provide a common focus for understanding the essential action of differentiation inducers in melanoma cells.     

The synthetic rate of dipeptide catalyzed by organic solvent-stable protease from Pseudomonas aeruginosa PST-01 in the presence of water-soluble organic solvents

The initial synthetic rates of peptide Cbz-Arg-Leu-NH(2) from Cbz-Arg and Leu-NH(2) using PST-01 protease in the presence and absence of organic solvents were investigated under various conditions. The synthetic rates of Cbz-Arg-Leu-NH(2) in the presence of 50% (v/v) methanol, 50% (v/v) N,N-dimethylformamide (DMF) and 60% (v/v) dimethyl sulfoxide (DMSO) were 1.6-, 2.4-, and 5.1-times higher than that in the absence of organic solvent, respectively. The PST-01 protease was not only stable in the presence of organic solvents but also exhibited high reaction rates in the presence of methanol, DMF, and DMSO. When the Cbz-Arg concentration was lower than 60mM or the Leu-NH(2) concentration was lower than 400mM, the initial rates increased lineally with increase in their concentrations. However, the rates did not increase when the Leu-NH(2) concentration was more than 500mM. The optimum temperature and pH of the reaction were 40 degrees C and 7.0, respectively.     

Effect of organic solvents on the activity and stability of an extracellular protease secreted by the haloalkaliphilic archaeon <Emphasis Type="Italic">Natrialba magadii</Emphasis>

The effect of various organic solvents on the activity and stability of an extracellular protease produced by the haloalkaliphilic archaeon Natrialba magadii was tested. This protease was active and stable in aqueous-organic solvent mixtures containing 1.5 M NaCl and glycerol, dimethylsulfoxide (DMSO), N,N-dimethyl formamide, propylenglycol, and dioxane. Among the solvents tested, DMSO, propylenglycol, and glycerol were effective in preserving enzyme stability in suboptimal NaCl concentrations. The stabilizing effect of DMSO on this haloalkaliphilic protease was more efficient at pH 8 than at pH 10, suggesting that DMSO may not substitute for salt to allow halophilic proteins to withstand the effect of high pH values. These results show that Nab. magadii extracellular protease is a solvent tolerant enzyme and suggest a potential application of this haloalkaliphilic protease in aqueous-organic solvent biocatalysis.     

Phenylethanolamine N-methyltransferase has beta-carboline 2N-methyltransferase activity: hypothetical relevance to Parkinson's disease

Mammalian brain has a β-carboline 2N-methyltransferase activity that converts β-carbolines, such as norharman and harman, into 2N-methylated β-carbolinium cations, which are structural and functional analogs of the Parkinsonian-inducing toxin 1-methyl-4-phenylpyridinium cation (MPP⁺). The identity and physiological function of this β-carboline 2N-methylation activity was previously unknown. We report pharmacological and biochemical evidence that phenylethanolamine N-methyltransferase (EC 2.1.1.28) has β-carboline 2N-methyltransferase activity. Specifically, purified phenylethanolamine N-methyltransferase (PNMT) catalyzes the 2N-methylation (21.1 pmol/h per unit PNMT) of 9-methylnorharman, but not the 9N-methylation of 2-methylnorharmanium cation. LY134046, a selective inhibitor of phenylethanolamine N-methyltransferase, inhibits (IC₅₀ 1.9 μM) the 2N-methylation of 9-methylnorharman, a substrate for β-carboline 2N-methyltransferase. Substrates of phenylethanolamine N-methyltransferase also inhibit β-carboline 2N-methyltransferase activity in a concentration-dependent manner. β-Carboline 2N-methyltransferase activity (43.7 pmol/h/mg protein) is present in human adrenal medulla, a tissue with high phenylethanolamine N-methyltransferase activity.

We are investigating the potential role of N-methylated β-carbolinium cations in the pathogenesis of idiopathic Parkinson’s disease. Presuming that phenylethanolamine N-methyltransferase activity forms toxic 2N-methylated β-carbolinium cations, we propose a novel hypothesis regarding Parkinson’s disease—a hypothesis that includes a role for phenylethanolamine N-methyltransferase-catalyzed formation of MPP⁺-like 2N-methylated β-carbolinium cations.     

Regeneration of ethyl parathion antibodies for repeated use in immunosensor: a study on dissociation of antigens from antibodies

Reliable analysis using an immunosensor strongly depends on the specificity, activity, and sensitivity of the antibody. Immobilization of antibody on the solid matrix enables its repeated use, for which it is required to dissociate the antigens and antigen-enzyme conjugate from the immobilized antibody matrix after each use and while doing so, a maximum retention of activity and specificity are crucial requirements. In the present investigation, on the development of an immunosensor for the organophosphorus pesticide ethyl parathion (EP) using EP antibodies, different dissociating agents such as organic solvents, detergents and acidic buffers, that is, dimethyl sulphoxide (DMSO), Tween-20, cetyl trimethylammonium bromide (CTAB), methanol, chloroform, guanidium chloride (GdmCl), glycine-HCl (Gly-HCl) buffer in the pH range of 1.5-3.0, pierce buffer and combination of DMSO and methanol in phosphate buffer and Gly-HCl buffer and salts like NaCl and MgCl2 were used. Generally about 50-60% dissociation was obtained with some degree of denaturation of the antibody immobilized on the sepharose matrix. However, 1% DMSO in combination with 0.2 M Gly-HCl buffer at a pH of 2.3 showed 97% dissociation and the immobilized antibody retained sufficient activity to carry out 14 reproducible assays for EP.     

Optimization and characterization of dextran membranes prepared by electrospinning

Dextran is soluble in both water and organic solvents, so it could be a versatile biomacromolecule for preparing nanofibrous electrospun membranes by blending with either water-soluble bioactive agents or hydrophobic biodegradable polymers for biomedical applications. We have formulated electrospun dextran membranes, and the effects of various processing parameters on the membrane properties were investigated. It was found that uniform nanofibrous dextran membranes could be formed by using water, DMSO/water, and DMSO/DMF mixtures as solvents through adjusting the processing conditions (solution concentration, voltage, and the distance between the electrode and the collecting plate). When water was used as a solvent, up to 10% (w/w) of bovine serum albumin (BSA) or lysozyme could be directly incorporated into the dextran electrospun membrane without compromising its morphology. No significant effect of the electrospinning process on lysozyme activity was observed. The composite electrospun membranes consisting of poly(D,L-lactide-co-glycolide) (PLGA) and dextran were obtained using DMSO/DMF (50/50, volume ratio) mixture as solvents. For cross-linking the electrospun membrane, dextran was modified by substitution of methacrylate groups at the hydroxyl sites. It was found that the electrospun membranes prepared from methacrylated dextran can be cured by UV irradiation in the presence of 1% of 2,2-dimethoxy-2-phenylacetophenone (DMPA) as a photoinitiator.     

Structure of lysozyme dissolved in neat organic solvents as assessed by NMR and CD spectroscopies

The structure of the model protein hen egg-white lysozyme dissolved in water and in five neat organic solvents (ethylene glycol, methanol, dimethylsulfoxide (DMSO), formamide, and dimethylformamide (DMF)) has been examined by means of 1H NMR and circular dichroism (CD) spectroscopies. The NMR spectra of lysozyme reveal the lack of a defined tertiary structure in all five organic solvents, although the examination of line widths suggests the possibility of some ordered structure in ethylene glycol and in methanol. The near-UV CD spectra of the protein suggest no tertiary structure in lysozyme dissolved in DMSO, formamide, and DMF, while a distinctive (albeit less pronounced than in water) tertiary structure is seen in ethylene glycol and a drastically changed one in methanol. A highly developed secondary structure was observed by far-UV CD in ethylene glycol and methanol; interestingly, the alpha-helix content of the protein in both was greater than in water, while the beta-structure content was lower. (Solvent absorbance in the far-UV region prevents conclusions about the secondary structure in DMSO, formamide and DMF.) Copyright 1999 John Wiley & Sons, Inc.     

Solution properties of starch nanoparticles in water and DMSO as studied by dynamic light scattering

Solution properties of starch nanoparticles dispersed in DMSO and in water were studied using dynamic light scattering. The particle size distribution had two main peaks in both solvents at all scattering angles studied. They were at around 40 and 300 nm, ascribed to isolated starch nanoparticles and their aggregates, respectively. From the excess scattering intensity by the 40-nm particles, the molecular weight of the nanoparticle was estimated as 2.2–2.6×10⁶ g/mol. When the concentration was increased, another peak appeared at around 1 μm. Raising the temperature from 25 to 65 °C did not change the distribution, indicating a purely entropic process in dynamic equilibrium of the aggregation. In DMSO, an oscillatory behavior was observed in the autocorrelation function at high temperatures.     

Stability of free and immobilised peroxidase in aqueous–organic solvents mixtures

The activity and stability of horseradish (Amoracia rusticana) peroxidase (HRP) free in solution and immobilised onto silica microparticles was studied in the presence of organic co-solvents.

The effect of several hydrophilic organic solvents, namely dimethyl sulfoxide, dimethylformamide, dioxan, acetonitrile and tetrahydrofuran, in the activity and stability of free HRP was studied. From the solvents tested, DMSO led to the highest activities and stabilities. After 2 h of incubation at 35°C, the remaining activity of the enzyme in the presence of 30% of each solvent was less than 30%, with exception of DMSO for which the enzyme remained fully active.

In order to increase stability, HRP was covalently immobilised onto silica microparticles. The half-life of the enzyme in buffer at 50°C increased from 2 to 52 h when the enzyme was immobilised. The stability of both free and immobilised HRP was also studied at 50°C in aqueous mixtures of 3.5, 20, 35 and 50% (v/v) DMSO. Free HRP stability was not affected by the presence of 3.5 and 20% DMSO, but higher contents lead to a more pronounced deactivation. Immobilised HRP stability increased with DMSO content up to 20%, decreasing for higher contents. The enzyme half-life increased more than 300% when changing from buffer to 20% DMSO.

The deactivation of free HRP was modelled using the simple exponential decay, and the deactivation of immobilised HRP was described by a two-step inactivation model.     

Physical properties of methylcelluloses in relation with the conditions for cellulose modification

A high molecular weight glycoprotein antigen was isolated by size exclusion chromatography on Sepharose 4B from an extract of the yeast Saccharomyces cerevisiae. The glycoprotein antigen Sc 500 was shown to be identical to the antigen termed gp200 previously isolated (Heelan et al., 1991). The MW of Se 500 was determined to be about 500 kDa by size exclusion chromatography on Superose 6 and 460 kDa ± 20k Da by size-exclusion chromatography/multi-angle laser light scattering (SEC/MALLS). Sc 500 contained 90% mannose and traces of N-acetylglucosamine. The amino acid composition revealed that serine and threonine were the most abundant amino acids of the protein part. By alkaline borohydride treatment some, but not all bonds between protein and carbohydrate were broken. This indicates that the main type of linkage between protein and carbohydrate is O-glycosidic and that a minor type is of N-glycosidic nature. Methylation analysis revealed that the mannose residues were connected by 1 → 2 and 1 → 3 linkages with 1 → 2, 1→ 6 linked branch points.

Purified Sc 500 was subjected to a series of chemical and enzymatic modifications followed by studies of antibody binding activity. Treatments with both periodate and alkaline sodium borohydride reduced the human serum IgA, IgG and monoclonal IgM antibody binding activity of Sc 500 whereas trypsin and pronase did not affect its ability to bind these antibodies. The mannosidase Man1 → 2,3,6Man reduced the IgM binding to Sc 500 while the other enzymes included in this experiment (Man1→2 Man, Manβ1 →4GlcNAc and PNGase F) had no effect on the antibody binding.     

Enzymatic transesterification of purine nucleoside having a low solubility in organic medium

Enzymatic transesterification of guanosine having low solubility against organic solvent was examined. For the transesterification between guanosine and divinyl adipate catalyzed by alkaline protease from Bacillus (Bioprase), DMSO was added to DMF to increase the solublility of the nucleoside, and the conversion rate of guanosine to the vinyl guanosine ester was less than 30%. To overcome the reversible inactivation of enzyme by hydrophilic organic solvents, the reaction was carried out with 10% (v/v) water. The transesterification reaction was effectively catalyzed in DMF/DMSO in the presence of water and the conversion rate increased ca. 70% after 7 d reaction. The result shows that the water effect of Bioprase would be a useful method for the synthesis of low solublility nucleoside esters.     

Optimizing lipase activity, enantioselectivity, and stability with medium engineering and immobilization for beta-blocker synthesis.

Lipase from Pseudomonas cepacia showed poor activity and moderate enantioselectivity (E) in pure aqueous systems for hydrolysis of a racemic mixture (+/-)-1-chloro-2-acetoxy-3-(1-naphthyloxy)-propane, which is a potential intermediate for beta-blocker synthesis. However, addition of polar organic solvents to the reaction can change both the activity and the enantioselectivity for this chiral reaction significantly. It was observed, in general, that the activity increases and the enantioselectivity decreases with the increase in the polarity of the organic solvent added to the medium. Among the six solvents chosen (i.e., dimethylsulfoxide [DMSO], 1, 4-dioxane, dimethylformamide [DMF], acetone, 1-propanol, and tetrahydrofuran [THF]), maximum activity and minimum enantioselectivity was obtained with DMSO, whereas minimum activity and maximum enantioselectivity was obtained with THF as the cosolvents. In the subsequent studies, native or polyethylene glycol (PEG)-modified lipase was immobilized by entrapping in Caalginate gel beads. In a fixed-bed continuous reactor containing these catalyst beads, the enzyme was found to be at least three times more enantioselective than the native form in a batch reactor. This fixed-bed reactor with the beads could be operated with high concentration of acetone (33% v/v) for about 1 month without a significant loss of enzyme activity and enantioselectivity.     

Activity studies of glucose oxidase immobilized onto poly(N-vinylimidazole) and metal ion-chelated poly(N-vinylimidazole) hydrogels

Poly(N-vinylimidazole), PVIm, gels were prepared by γ-irradiation polymerization of N-vinylimidazole in aqueous solutions. These affinity gels with a water swelling ratio of 1800% for plain polymeric gel and between 30 and 80% for Cu(II) and Co(II)-chelated gels at pH 6.0 in phosphate buffer were used in glucose oxidase (GOx) adsorption–desorption studies. Different amounts of Cu(II) and Co(II) ions (maximum 3.64 mmol/g dry gel for Cu(II) and 1.72 mmol/g dry gel for Co(II)) were loaded onto the gels by changing the initial concentration of Cu(II) and Co(II) ions, and pH. GOx adsorption on these gels from aqueous solutions containing different amount of GOx at different pH was investigated in batch reactors. Immobilized glucose oxidase activity onto the poly(N-vinylimidazole), and Cu(II) and Co(II)-chelated poly(N-vinylimidazole) were investigated with changing pH and the initial glucose oxidase concentration. Maximum activity of immobilized glucose oxidase onto the PVIm, Cu(II) and Co(II)-chelated PVIm gels was investigated and pH dependence was observed to be at pH 6.5 for free enzyme, pH 7.0 for PVIm, pH 7.5 for Cu(II) and Co(II)-chelated PVIm gels, respectively. The stability of the immobilized enzyme is very high for all gels and the residual activity was higher than 93% in the first 10 days.