Highly selective resonance scattering detection of trace thrombin using aptamer-modified AuRe nanoprobe

The gold-rhenium (AuRe) composite nanoparticle was prepared by NaBH₄ reduction procedure, and was modified by the aptamer to obtain an AuRe nanoprobe (AuRessDNA) for thrombin. In pH 7.0 Tris–HCl buffer solution and in the presence of salt, the nanoprobe specifically combined with thrombin to form AuRe-aptamer-thrombin cluster that resulted in the resonance scattering intensity (I _560 nm) increasing at 560 nm. The increased intensity ΔI _{560 nm} was linear to the thrombin concentration in the range of 0.115–6.93 nmol/L, with a regression equation of ΔI _{560 nm} = 53.0 C + 2.5, a correlation coefficient of 0.9989, and a detection limit of 13 pmol/L. This method was applied to detect thrombin in human plasma samples, with satisfactory results.     

A highly sensitive resonance scattering spectral assay for carcinoembryonic antigen using immunonanogold as probe and nanocatalyst of NH2OH�CCu(II) particle reaction

Nanogold of 10 nm was used to label carcinoembryonic antigen antibody (CEAAb) to prepare a probe (Au-CEAAb) for carcinoembryonic antigen (CEA). In a Na₂HPO₄–NaH₂PO₄ buffer solution of pH 6.8, CEA reacted with Au-CEAAb to form a big Au-CEAAb–CEA immunocomplex that can be removed by centrifugation. The unreacted Au-CEAAb in the centrifugal supernatant exhibited catalytic effect on the Cu₂O particle reaction, and the Cu₂O particles displayed a resonance scattering (RS) peak at 602 nm. When CEA increased, the RS intensity at 602 nm decreased, and the decreased RS intensity (ΔI _602 nm) was linear to CEA concentration (C _CEA) in the range of 0.02–12 ng mL⁻¹, with the regression equation of ΔI _602 nm = 27.1 C _CEA + 3.3, correlation coefficient of 0.9978 and detection limit of 3 pg mL⁻¹ CEA. The proposed method was applied to detect CEA in real samples, with satisfactory results.     

Sensitive detection of strong acidic condition by a novel rhodamine‐based fluorescent pH chemosensor

A novel rhodamine‐based fluorescent pH probe responding to extremely low pH values has been synthesized and characterized. This probe showed an excellent photophysical response to pH on the basis that the colorless spirocyclic structure under basic conditions opened to a colored and highly fluorescent form under extreme acidity. The quantitative relationship between fluorescence intensity and pH value (1.75–2.62) was consistent with the equilibrium equation pH = pKa + log[(I_max – I)/(I – I_min)]. This sensitive pH probe was also characterized with good reversibility and no interaction with interfering metal ions, and was successfully applied to image Escherichia coli under strong acidity. Copyright © 2015 John Wiley & Sons, Ltd.     

A novel and sensitive resonance scattering assay for detection of urea in serum coupled urease catalytic reaction and NH4 + associated particle reaction

In the pH 6.6 Na₂HPO₄–NaH₂PO₄ buffer solutions and in the presence of urease catalyst, urea can be decomposed to form NH₄ ⁺. The NH₄ ⁺ reacted with sodium tetraphenyl boron (NaTPB) to form the association particles that exhibited a resonance scattering (RS) peak at 474 nm. When the urea concentration increased, NH₄ ⁺ increased, and RS intensity at 474 nm enhanced linearly. Under the chosen conditions, the increased RS intensity (ΔI _474 nm) had a linear response to the urea concentration in the range of 0.125–15 μM, with a detection limit of 0.058 μM urea, and a regression equation of ΔI _474 nm = 31.6C + 2.1, a correlation coefficient of 0.9986. This catalytic RS method was applied for the detection of urea in human serum sample, with good selectivity and sensitivity, and the results were consistent with the reference method.     

A Simple and Sensitive SPRS Method for Trace H2O2 Based on the TiO2+ Complex and Gold Nanoparticles Aggregation Reactions

In the medium of H₂SO₄ and in the presence of TiO²⁺, gold nanoparticles in size of 10 nm exhibited a weak surface plasmon resonance scattering (SPRS) peak at 775 nm. Upon addition of trace H₂O₂, the yellow complex [TiO(H₂O₂)]²⁺ formed that cause the gold nanoparticles aggregations to form bigger gold nanoparticle clusters in size of about 900 nm, and the SPRS intensity at 775 nm (I) enhanced greatly. The enhanced intensity ΔI was linear to the H₂O₂ concentration in the range of 0.025–48.7 μg/mL, with a detection limit of 0.014 μg/mL H₂O₂. This SPRS method was applied to determining H₂O₂ in water samples with satisfactory results.     

Validated sensitive spectrofluorimetric method for determination of antihistaminic drug azelastine HCl in pure form and in pharmaceutical dosage forms: application to stability study

A highly sensitive, simple and rapid spectrofluorimetric method was developed for the determination of azelastine HCl (AZL) in either its pure state or pharmaceutical dosage form. The proposed method was based on measuring the native fluorescence of the studied drug in 0.2 M H₂SO₄ at λ_em = 364 nm after excitation at λ_ex = 275 nm. Different experimental parameters were studied and optimized carefully to obtain the highest fluorescence intensity. The proposed method showed a linear dependence of the fluorescence intensity on drug concentration over a concentration range of 10–250 ng/mL, with a limit of detection of 1.52 ng/mL and limit of quantitation of 4.61 ng/mL. Moreover, the method was successfully applied to pharmaceutical preparations, with percent recovery values (± SD) of 99.96 (± 0.4) and 100.1 (± 0.52) for nasal spray and eye drops, respectively. The results were in good agreement with those obtained by the comparison method, as revealed by Student's t‐test and the variance ratio F‐test. The method was extended to study the stability of AZL under stress conditions, where the drug was exposed to neutral, acidic, alkaline, oxidative and photolytic degradation according to International Conference on Harmonization (ICH) guidelines. Copyright © 2016 John Wiley & Sons, Ltd.     

Paper mill sludge-based carbon quantum dots as a specifically ratiometric fluorescent probe for the sensitive and selective detection of coptisine

Coptisine (COP), one of the bioactive components in Rhizoma Coptidis, has many pharmacological effects. Meanwhile, the determination of COP is essential in pharmacological and clinical applications. Herein, we prepared carbon quantum dots (CQDs) by one-step oil-thermal method using paper mill sludge (PMS) as precursor, and developed a ratiometric fluorescence method for the determination of COP. The structural and optical properties of PMS-CQDs were evaluated through high-resolution transmission electron microscopy (HRTEM), Fourier-transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), X-ray powder diffraction (XRD), ultraviolet-visible (UV-vis), fluorescence, zeta potential and fluorescence lifetime experiments. Fluorescence intensity ratio at 550 nm and 425 nm (I₅₅₀/I₄₂₅) was recorded as an index for quantitative detection of COP. The detection concentration of COP ranges from 0.1 to 50 μM in good linear correlation (R² = 0.9974) with a limit of detection of 0.028 μM (3σ/k). The quenching mechanism was deduced to be inner filter effect and static quenching. The ratiometric fluorescent probe showed impressive selectivity and sensitivity towards COP, and was successfully applied to the detection of COP in human urine with expected recoveries (95.22–111.00%) and relative standard deviations (0.46–2.95%), indicating that our developed method has a great application prospect in actual sample detection.     

Study on the interaction between erythrosine B and the cardiac drug amiodarone using fluorescence,scattering, and absorbance spectra and their analytical application

In an acidic buffered solution, erythrosine B can react with amiodarone to form an association complex, which not only generates great enhancement in resonance Rayleigh scattering (RRS) spectrum of erythrosine B at 346.5 nm but also results in quenching of fluorescence spectra of erythrosine B at λ_emission = 550.4 nm/λ_excitation = 528.5 nm. In addition, the formed erythrosine B–amiodarone complex produces a new absorbance peak at 555 nm. The spectral characteristics of the RRS, absorbance, and fluorescence spectra, as well as the optimum analytical conditions, were studied and investigated. As a result, new spectroscopic methods were developed to determine amiodarone by utilizing erythrosine B as a probe. Moreover, the ICH guidelines were used to validate the developed RRS, photometric, and fluorimetric methods. The enhancements in the absorbance and the RRS intensity and the decrease in the fluorescence intensity of the used probe were proportional to the concentration of amiodarone in ranges of 2.5–20.0, 0.2–2.5, and 0.25–1.75 μg/mL, respectively. Furthermore, limit of detection values were 0.52 ng/mL for the spectrophotometric method, 0.051 μg/mL for the RRS method, and 0.075 μg/mL for the fluorimetric method. Moreover, with good recoveries, the developed spectroscopic procedures were applied to analyze amiodarone in its commercial tablets.     

Bioinspired multicolour carbon dots: comprehensive cytotoxicity,phytotoxicity, and bioimaging in animal cells and plants

During the past decades, carbon dots (CDs) as a kind of nanoparticles with interesting fluorescence properties have retained their place as one of the best bioimaging agents, although their effects on plants have been rarely studied. In this study, we synthesized two kinds of concentration-dependent multicolour CDs using two solvent approaches, phosphate-buffered saline (PBS) and ethanol 20%. We confirmed the nature of the CDs through Fourier transform infrared spectroscopy, atomic force microscopy, dynamic light scattering, zeta potential, X-ray powder diffraction, and high-resolution transmission electron microscopy. Afterwards, the cytotoxicity, phytotoxicity, and bioimaging of animal cells and plants using both synthesized CDs were examined. Eventually, PBS-based CDs were recommended during this study as an efficient bioimaging agent for animal cells and plants because of the appealing features of this CD, such as a small size range of less than 10 nm, surface charge with an average of −24 mV, a high quantum yield of 35.82%, the higher fluorescence intensity of ~400 a.u. for blue fluorescence light and 250 a.u. for green fluorescence light. Other features showing the superiority of PBS-based CDs include high photostability, low phytotoxicity (p ≤ 0.05 and p ≤ 0.01) and above all, there was no significant cytotoxicity at the concentration range of 500–7.81 μg/ml.     

A selective resonance scattering assay for immunoglobulin G using Cu(II)-ascorbic acid-immunonanogold reaction

In sodium acetate–acetic acid buffer solution, Au, Ag, Pt, Pd, Fe₃O₄, and Cu₂O nanoparticles have catalytic enhancement effect on the reduction of Cu²⁺ by ascorbic acid to form large copper particles that exhibit a strong resonance scattering peak at 610 nm. Those nanocatalytic reactions were studied by the resonance scattering spectral technique, and smaller nanogold exhibited stronger catalytic enhancement effect in pH 4.2 sodium acetate–acetic acid buffer solution. The resonance scattering intensity at 610 nm increased linearly with the concentrations of 0.02 to 1.60, 0.040 to 1.20, and 0.12 to 4.70 nM nanogold in sizes of 5, 10, and 15 nm with detection limits of 0.010, 0.030, and 0.10 nM, respectively. An immunonanogold-catalytic resonance scattering bioassay was established, combining the immunonanogold-catalytic effect on CuSO₄–ascorbic acid reaction with the resonance scattering detection technique. As a model, 0.03 to 7.5 ng ml⁻¹ immunoglobulin G can be assayed by this immunonanogold-catalytic resonance scattering bioassay with a detection limit of 0.015 ng ml⁻¹.     

A ratiometric fluorescence strategy based on copper nanoclusters/carbon dots for sensitive detection of doxorubicin

Sensitive detection of doxorubicin (DOX) is critical for clinical theranostics. A novel ratiometric fluorescence strategy based on the inner filter effect (IFE) has been established for the sensitive detection of DOX by designing a ratiometric fluorescence probe. In the presence of DOX, the fluorescence intensity of copper nanoclusters (CuNCs) at 485 nm decreases, and the fluorescence intensity of carbon dots at 560 nm increases. Therefore, DOX can be quantitatively detected by measuring the ratio of the fluorescence intensities at 560 and 485 nm (F₅₆₀/F₄₈₅). The F₅₆₀/F₄₈₅ ratio exhibits a linear correlation with the DOX concentration in the range from 1.0 × 10⁻⁸ M to 1.0 × 10⁻⁴ M with the detection limit of 3.7 nM. Furthermore, this method was also successfully applied to the analysis of DOX in human plasma samples, affording an effective platform for drug safety management.     

Temperature- and pH-Induced Structural Changes in the Membrane of the Hyperthermophilic Archaeon Aeropyrum pernix K1

The influence of pH and temperature on the structural organization, fluidity and permeability of the hyperthermophilic archaeon membrane was investigated in situ by a combination of electron paramagnetic resonance (EPR) and fluorescence emission spectroscopy. For EPR measurements, Aeropyrum pernix cells, after growing at different pHs, were spin-labeled with the doxyl derivative of palmitic acid methylester (MeFASL[10,3]). From the EPR spectra maximal hyperfine splitting (2A _max) and empirical correlation time (τ_emp), which are related to mean membrane fluidity, were determined. The mean membrane fluidity increases with temperature and depends on the pH of the growth medium. Computer simulation of the EPR spectra shows that membrane of A. pernix is heterogeneous and consists of the regions characterized with three different types of motional characteristics, which define three types of membrane domains. Order parameter and proportion of the spin probes in the three types of domains define mean membrane fluidity. The fluidity changes of the membrane with pH and temperature correlate well with the ratio between the fluorescence emission intensity of the first and third bands in the vibronic spectra of pyrene, I₁/I₃. At pH 7.0 a decrease of I₁/I₃ from 2.0 to 1.2, due to the penetration of pyrene into the nonpolar membrane region, is achieved at temperatures above 65°C, the lower temperature limit of A. pernix growth.     

Relationship between the wavelength maximum of a protein and the temperature dependence of its intrinsic tryptophan fluorescence intensity

Proper determination of the temperature dependence of intrinsic tryptophan fluorescence intensity in native and denatured states is an essential prerequisite for extracting the free energy of protein unfolding from the thermal denaturation profile. The most common method employed in determining the temperature dependence of these conformations is through the determination of slopes of pre- and post-transition baselines. However, simulations of protein unfolding profiles suggest that this method does not work for marginally stable proteins. We show herein that the temperature dependence of the fluorescence intensity of N-acetyl tryptophanamide (NATA) in organic solvents and water may be used to represent the temperature dependence of the fluorescence intensity of tryptophan in native and denatured conformations of a protein, respectively. The wavelength of the emission maximum, λ _max, of N-acetyl tryptophanamide (NATA) in a particular solvent or tryptophan in proteins is related to the temperature dependence (m) of its fluorescence intensity by the equation: m (K⁻¹) = (−0.000299 ± 2.2 × 10⁻⁵ K⁻¹ nm⁻¹) × λ _max (nm) + (0.0919 ± 0.0025 K⁻¹).     

Nuclear fast red‐based colorimetric sensors for sensitive and selective detection of Ag ions

The reduction of nuclear fast red (NFR) stain by sodium tetrahydroboron was catalyzed in the presence of silver ions (Ag⁺). The fluorescence properties of reduced NFR differed from that of NFR. The product showed fluorescence emission at 480 nm with excitation at 369 nm. Furthermore, the fluorescence intensity of the mixture increased strongly in the presence of Ag⁺ and Britton–Robinson buffer at pH 4.78. There was a good linear relationship between increased fluorescence intensity (ΔI) and Ag⁺ concentration in the range 5.0 × 10^?9 to 5.0 × 10^?8 M. The correlation coefficient was 0.998, and the detection limit (3σ/k) was 1.5 × 10^?9 M. The colour of the reaction system changed with variation in Ag⁺ concentration over a wide range. Based on the colour change, a visual semiquantitative detection method for recognition and sensing of Ag⁺ was developed for the range 1.0 × 10^?8 to 5.0 × 10^?4 M, with an indicator that was visible to the naked eye. Therefore, a sensitive, simple method for determination of Ag⁺ was developed. Optimum conditions for Ag⁺ detection, the effect of other ions and the analytical application of Ag⁺ detection of synthesized sample were investigated.     

Catalytic effect of ReAu nanoalloy on the Te particle reaction and its application to resonance scattering spectral assay of CA125

ReAu nanoparticles with a molar ratio of 2:8 Re and Te nanoparticles were prepared by NaBH₄ reduction. In HCl medium at 65°C, ultratrace Re, Te and ReAu bimetallic nanoparticles strongly catalyzed the slow reaction between Sn(II) and Te(VI) to form Te particles, which exhibited the strongest resonance scattering (RS) peak at 782 nm. As the amount of nanocatalyst increased, the RS intensity at 782 nm (I_{782 nm}) increased linearly, and the increase in intensity ΔI_{782 nm} was linear to the ReAu, Re and Te concentrations in the ranges 0.07–9.0, 0.01–4.5 and 30–1200 nm , respectively. As a model, a ReAu immunonanoprobe catalytic Te–particle resonance scattering spectral (RSS) method was established for detection of CA125, using ReAu nanoparticle labeling CA125 antibody (CA125Ab) to obtain an immunonanoprobe (ReAuCA125Ab) for CA125. In pH 7.6 citric acid–Na₂HPO₄ buffer solution, ReAuCA125Ab aggregated nonspecifically. Upon addition of CA125, the immunonanoprobe reacted with it to form ReAuCA125Ab–CA125 dispersive immunocomplex in the solution. After the centrifugation, the supernatant containing the immunocomplex was used to catalyze the reaction of Te(VI)–Sn(II) to produce the Te particles that resulted in the I_{782 nm} increasing. The ΔI_{782 nm} was linear to CA125 concentration (C_CA125) in the range 0.1–240 mU/mL. The regression equation, correlation coefficient and detection limit were ΔI_{782 nm} = 1.61 C_CA125 + 1.5, 0.9978 and 0.02 mU/mL, respectively. The proposed method was applied to detect CA125 in serum samples, with satisfactory results. Copyright © 2010 John Wiley & Sons, Ltd.     

From a non‐target to a target: identification of a fermentation volatile blend attractive to Zaprionus indianus

The African fig fly, Zaprionus indianus Gupta, is rapidly spreading through the New World and is a new potential pest for numerous fruit crops. Methods are needed to detect and monitor Z. indianus. A recent study shows that Z. indianus can be attracted with a mixture of wine and vinegar, but there are no chemical attractants yet identified. This fly was captured incidentally as a non‐target insect in experiments to develop chemical lures, based on wine and vinegar fermentation volatiles, for Drosophila suzukii Matsumura and Drosophila melanogaster Meigen. We then generated testable hypotheses on what combination of these volatiles was involved in Z. indianus attraction to wine and vinegar. We determined through a series of trapping experiments that the blend of ethanol, acetic acid, acetoin, isoamyl acetate, methionol and ethyl hexanoate constitutes a strong attractant for Z. indianus and accounts for its attraction to the combination of wine and vinegar. These results and findings provide the first opportunity to develop a long‐lasting and consistent chemical lure for trapping of Z. indianus. Such a lure in a suitable trap should provide a good means to document the spread of the fly and determine its seasonality and abundance in new areas and crops.     

Method for resolution and quantification of components of the non-photochemical quenching (<Emphasis Type="Italic">q</Emphasis><Subscript>N</Subscript>)

A new method of the chlorophyll (Chl) a fluorescence quenching analysis is described, which allows the calculation of values of (at least) three components of the non-photochemical quenching of the variable Chl a fluorescence (q _N) using a non-linear regression of a multi-exponential function within experimental data. Formulae for coefficients of the “energy”-dependent (ΔpH-dependent) quenching (q _E), the state-transition quenching (q _T) and the photo/inhibitory quenching (q _I) of Chl a fluorescence were found on the basis of three assumptions: (i) the dark relaxation kinetics of q _N, as well as of all its components, is of an exponential nature, (ii) the superposition principle is valid for individual Chl a fluorescence quenching processes and (iii) the same reference fluorescence level (namely the maximum variable Chl a fluorescence yield in the dark-adapted state, F _V) is used to define both q _N and its components. All definitions as well as the algorithms for analytical recognition of the q _N components are theoretically clarified and experimentally tested. The described theory results in a rather simple equation allowing to compute values for all q _N components (q _E, q _T, q _I) as well as the half-times of relaxation (τ_1/2) of corresponding quenching processes. It is demonstrated that under the above assumptions it holds: q _N = q _E + q _T + q _I. The theoretically derived equations are tested, and the results obtained are discussed for non-stressed and stressed photosynthetically active samples. Semi-empirical formulae for a fast estimation of values of the q _N components from experimental data are also given.     

Isolation and classification of acetic acid bacteria from high percentage vinegar fermentations

Summary A method for growing acetic acid bacteria from high percentage submerged vinegar fermentations was established by overflowing soft agar, containing acetic acid, with fermenting reactor fluid. Mixed cultures were found in a submerged process that was working well (1), in a submerged process that had broken down (2), and in a vinegar generator (3). The strains differed in part from each other with respect to tolerance towards acetic acid, ethanol, pH and in other physiological criteria. All strains that were isolated from (1) and some from (3) were specialized for acetate media as they needed acetic acid and low pH values (2.1–3.8) in addition to yeast extract and glucose or ethanol. We suppose that they belonged to the acetic acid-producing strains active in the process. None of the strains derived from (2) was of this acetophilic type. All except one of the stains from (2) belonged to the species Acetobacter hansenii, the other cultures were of A. pasteurianus.     

Synthesis of novel bispyrene diamines and their application as ratiometric fluorescent probes for detection of DNA

Fluorescent DNA probes with 1,6-hexanediyl as the linker between two pyrenes, phenylpyrenes or phenylethynyl pyrene fluorophores were synthesized (Py-1, Py-2 and Py-3) and their interactions with DNA were studied by UV–vis absorption spectra, fluorescence spectra and viscosity measurements. The probes show red-shifted emission compared with pyrene (up to 20 nm). We found the interaction of these probes with DNA can be either intercalation or groove binding. Ratiometric fluorometry (ratio of the monomer and excimer emission intensity versus concentration of DNA) was achieved with these probes for DNA quantification (with limit of detection, LOD, up to 0.1 μg/mL). We also found that the undesired oxygen sensitivity of the emission intensity of pyrene fluorophore can be greatly suppressed by extending the π-conjugation framework of pyrene (the I_Ar/I_air value is decreased from 8.10 for pyrene to less than 2.20 for the DNA probes described herein).     

A red fluorescent carbon dots with good water solubility for rapid detection of Al3+ in actual samples

We developed a facile strategy for the fabrication of red fluorescent carbon nanodots (R-CDs) and demonstrated their applications for Al³⁺ sensing. Red-emission carbon dots (CDs) were synthesized using a simple hydrothermal treatment with citric acid and urea as precursors, manifesting intriguing red-emission behaviour at 610 nm. With increasing Al³⁺ concentration, the fluorescence band at 610 nm decreased gradually. Monitoring the intrinsic fluorescence variation (I_610nm), as-prepared CDs were developed as an effective platform for fluorescent Al³⁺ sensing, with a linear range of 0.5–60.0 μM and a detection limit of 3.0 nM. More importantly, R-CDs have been applied successfully to the analysis of Al³⁺ in actual samples with satisfactory recoveries in the range 97.12–102.05%, which indicated that obtained CDs could be implemented as an effective tool for the identification and detection of Al³⁺ in actual samples.