Enhanced chemiluminescence of the fluorescein–KIO4 system by CdTe quantum dots for determination of catechol

In this paper, a novel chemiluminescence (CL) system was introduced based on the use of CdTe quantum dots (QDs) with the mixture solutions of fluorescein and potassium periodate (KIO₄) in alkaline medium. The CL signal of an ultra‐weak system was strongly enhanced in the presence of QDs. The application of CdTe QDs–fluorescein–KIO₄ system is reported for the first time. It was found that catechol had a diminishing effect on the CL reaction. Under optimal experimental conditions, CL intensity decreased linearly in a 1 to 100 μM catechol concentration range, with a 0.18 μM detection limit. A possible reaction mechanism was proposed according to the results of kinetic analyses, CL spectra, ultraviolet–visible and fluorescence spectra. The results pointed to an efficient energy transfer between the CL energy donor CdTe QDs and acceptor fluorescein. Finally, the CL method was successfully applied to the determination of catechol in environmental water samples.     

Ultrasensitive chemiluminescence assay for cimetidine detection based on the synergistic improving effect of Au nanoclusters and graphene quantum dots

A novel and sensitive chemiluminescence (CL) procedure based on the synergetic catalytic effects of gold nanoclusters (Au NCs) and graphene quantum dots (GQDs) was developed for the reliable measurement of cimetidine (CM). The initial experiments showed that the KMnO₄‐based oxidation of alkaline rhodamine B (RhoB) generated a very weak CL emission, which was intensively enhanced in the simultaneous presence of Au NCs and GQDs. CL intermediates can be adsorbed and gathered on the surface of Au NCs, becoming more stable. GQDs participate in the energy transferring processes and facilitate them. These improving effects were simultaneously obtained by adding both Au NCs and GQDs into the RhoB‐KMnO₄ reaction. Consequently, the increasing effect of the Au NCs/GQDs mixture was more than that of pure Au NCs or GQDs, and a new nano‐assisted powerful CL system was achieved. Furthermore, a marked quenching in the emission of the introduced CL system was observed in the presence of CM, so the system was examined to design a sensitive sensor for CM. After optimization of influencing parameters, the linear lessening in CL emission intensity of KMnO₄‐RhoB‐Au NCs/GQDs was verified for CM concentrations in the range 0.8–200 ng ml^?1. The limit of detection (3S_b/m) was 0.3 ng ml^?1. Despite being a simple CL method, good sensitivity was obtained for CM detection with reliable results for CM determination in human urine samples.     

Determination of ethanol using permanganate–CdS quantum dot chemiluminescence system

A novel and highly sensitive chemiluminescence (CL) method for the determination of ethanol was developed based on the CdS quantum dots (QDs)–permanganate system. It was found that KMnO₄ could directly oxidize CdS QDs in acidic media resulting in relatively high CL emission. A possible mechanism was proposed for this reaction based on UV/Vis absorption, fluorescence and the generated CL emission spectra. However, it was observed that ethanol had a remarkable inhibition effect on this system. This effect was exploited in the determination of ethanol within the concentration range 12–300 µg/L, with detection at 4.3 µg/L. In order to evaluate the capability of presented method, it was satisfactorily utilized in the determination of alcohol in real samples. Copyright © 2014 John Wiley & Sons, Ltd.     

Magnetic quantum dots in biotechnology – synthesis and applications

Quantum dots (QDs) have great promise in biological imaging, and as this promise is realized, there has been increasing interest in combining the benefits of QDs with those of other materials to yield composites with multifunctional properties. One of the most common materials combined with QDs is magnetic materials, either as ions (e.g. gadolinium) or as nanoparticles (e.g. superparamagnetic iron oxide nanoparticles, SPIONs). The fluorescent property of the QDs permits visualization, whereas the magnetic property of the composite enables imaging, magnetic separation, and may even have therapeutic benefit. In this review, the synthesis of fluorescent–magnetic nanoparticles, including magnetic QDs is explored; and the applications of these materials in imaging, separations, and theranostics are discussed. As the properties of these materials continue to improve, QDs have the potential to greatly impact biological imaging, diagnostics, and treatment.     

荧光量子点探针及其标记技术

量子点作为一种新型荧光标记物,与有机染料和荧光蛋白质相比,它们具有可调谐且宽的吸收光谱,激发可产生多重荧光颜色、强荧光信号、抗光漂白能力强等独特的光学特性,使其广泛应用在生物和医学领域。该文就量子点探针的表面修饰和功能化及其标记技术的研究进展进行了阐述。     

Graphene‐amplified electrogenerated chemiluminescence of CdTe quantum dots for H2O2 sensing

Electrogenerated chemiluminescence (ECL) of thiol‐capped CdTe quantum dots (QDs) in aqueous solution was greatly enhanced by PDDA‐protected graphene (P‐GR) film that were used for the sensitive detection of H₂O₂. When the potential was cycled between 0 and ?2.3 V, two ECL peaks were observed at ?1.1 (ECL‐1) and ?1.4 V (ECL‐2) in pH 11.0, 0.1 M phosphate buffer solution (PBS), respectively. The electron‐transfer reaction between individual electrochemically‐reduced CdTe nanocrystal species and oxidant coreactants (H₂O₂ or reduced dissolved oxygen) led to the production of ECL‐1. While mass nanocrystals packed densely in the film were reduced electrochemically, assembly of reduced nanocrystal species reacted with coreactants to produce an ECL‐2 signal. ECL‐1 showed higher sensitivity for the detection of H₂O₂ concentrations than that of ECL‐2. Further, P‐GR film not only enhanced ECL intensity of CdTe QDs but also decreased its onset potential. Thus, a novel CdTe QDs ECL sensor was developed for sensing H₂O₂. Light intensity was linearly proportional to the concentration of H₂O₂ between 1.0 × 10^?5 and 2.0 x 10^‐7 mol L^?1 with a detection limit of 9.8 x 10^?8 mol L^?1. The P‐GR thin‐film modified glassy carbon electrode (GCE) displayed acceptable reproducibility and long‐term stability. Copyright © 2012 John Wiley & Sons, Ltd.     

Preparation of carbon quantum dots based on starch and their spectral properties

A simple method for the synthesis of water‐soluble carbon quantum dots (CQDs) has been developed based on chemical oxidation of starch. The structures and optical properties of the CQDs were characterized by ultraviolet–visible (UV–Vis) spectroscopy, photoluminescence spectroscopy (PL) and transmission electron microscopy. The CQDs were found to emit bright blue fluorescence and disperse uniformly. The effects of ambient temperature, light and pH on the properties of CQDs were studied. The CQDs exhibited good chemical stability, good photostability and pH sensitivity. Furthermore, the interaction between CQDs and bovine serum albumin (BSA) was investigated. Copyright © 2014 John Wiley & Sons, Ltd.     

Sulfur and nitrogen co‐doped graphene quantum dot‐assisted chemiluminescence for sensitive detection of tryptophan and mercury (II)

A simple one‐step thermal treatment to prepare strong fluorescent sulfur and nitrogen co‐doped graphene quantum dots (SN‐GQD) using citric acid and l ‐cysteine as precursors was developed. The ultra‐weak chemiluminescence (CL) from the reaction of hydrogen peroxide (H₂O₂) and periodate (IO₄^?) was significantly enhanced by SN‐GQD in acidic medium. The enhanced CL was induced by excited‐state SN‐GQD (SN‐GQD*), which was produced from the transfer energy of (O₂)₂* and ¹O₂ to SN‐GQD and recombination of oxidant‐injected holes and electrons in SN‐GQD. In the presence of tryptophan (Trp), the CL intensity of the SN‐GQD–H₂O₂–KIO₄ system was greatly diminished. This finding was used to design a novel method for determination of Trp in the linear range 0.6–20.0 μM, with a limit of detection (LOD) of 58.0 nM. Furthermore, Hg²⁺ was detectable in the range 0.1–9.0 μM with a LOD of 64.0 nM, based on its marked enhancement of the SN‐GQD–H₂O₂–KIO₄ CL system. The proposed method was successfully applied to detect Trp in milk and human plasma samples and Hg²⁺ in drinking water samples, with recoveries in the range 95.7–107.0%.     

Sensitization enhancement of europium in ZnSe/ZnS core/shell quantum dots induced by efficient energy transfer

Eu‐doped ZnSe:/ZnS quantum dots (formed as ZnSe:Eu/ZnS QDs) were successfully synthesized by a two‐step wet chemical method: nucleation doping and epitaxial shell growing. The sensitization characteristics of Eu‐doped ZnSe and ZnSe/ZnS core/shell QD are studied in detail using photoluminescence (PL), PL excitation spectra (PLE) and time‐resolved PL spectroscopy. The emission intensity of Eu ions is enhanced and that of ZnSe QDs is decreased, implying that energy was transferred from the excited ZnSe host materials (the donor) to the doped Eu ions (the acceptor). PLE reveals that the ZnSe QDs act as an antenna for the sensitization of Eu ions through an energy transfer process. The dynamics of ZnSe:Eu/ZnS core/shell quantum dots with different shell thicknesses and doping concentrations are studied via PL spectra and fluorescence lifetime spectra. The maximum phosphorescence efficiency is obtained when the doping concentration of Eu is approximately 6% and the sample showed strong white light under ultraviolet lamp illumination. By surface modification with ZnS shell layer, the intensity of Eu‐related PL emission is increased approximately three times compared with that of pure ZnSe:Eu QDs. The emission intensity and wavelength of ZnSe:Eu/ZnS core/shell quantum dots can be modulated by different shell thickness and doping concentration. The results provide a valuable insight into the doping control for practical applications in laser, light‐emitting diodes and in the field of biotechnology. Copyright © 2014 John Wiley & Sons, Ltd.     

Interaction properties of biosynthesized cadmium sulphide quantum dots with human serum albumin: further investigation of antibacterial activities and sensing applications

The synthesis of small-sized quantum dots (QDs) (1–10 nm) via the green route has garnered great interest regarding their prospective use in many biological applications (diagnosis, drug delivery and in vivo sensing); this is difficult to achieve using chemical synthesis methods, which produce larger size QD particles and also require hazardous reagents. Here, we synthesized biogenic cadmium sulphide (CdS) QDs using green tea extract as the reducing agent to produce particles that were homogeneous and a smaller size of 2–4 nm. We also elucidated the (a) protein binding, (b) antibacterial use and (c) sensing applications of biogenic CdS QDs in this present work. The biosynthesized CdS QDs were found to have extensive antibacterial activity against both Gram-negative Escherichia coli and Gram-positive Enterococcus faecalis bacterial strains. The introduction of QDs in biological medium can lead to the formation of protein–QD complexes; therefore we investigated the binding interaction of CdS QDs with the carrier protein human serum albumin (HSA) in vitro. The synthesized CdS QDs quenched the intrinsic fluorescence of HSA through a static quenching mechanism and the binding constant (K_b) was in the order of 10⁴ M⁻¹. It was also observed that the presence of biogenic CdS QDs affected the HSA–ligand interactions in vitro. The synthesized CdS made highly effective sensors for tetracycline, rifampicin, and bilirubin with limit of detection (LOD) values of 99, 141 and 29 ng/ml, respectively.     

The behaviors of metal ions in the CdTe quantum dots–H2O2 chemiluminescence reaction and its sensing application

The behaviors of 15 kinds of metal ions in the thiol‐capped CdTe quantum dots (QDs)–H₂O₂ chemiluminescence (CL) reaction were investigated in detail. The results showed that Ag⁺, Cu²⁺ and Hg²⁺ could inhibit CdTe QDs and H₂O₂ CL reaction. A novel CL method for the selective determination of Ag⁺, Cu²⁺ and Hg²⁺ was developed, based on their inhibition of the reaction of CdTe QDs and H₂O₂. Under the optimal conditions, good linear relationships were realized between the CL intensity and the logarithm of concentrations of Ag⁺, Cu²⁺ and Hg²⁺. The linear ranges were from 2.0 × 10^?6 to 5.0 × 10^?8 mol L^?1 for Ag⁺, from 5.0 × 10^?6 to 7.0 × 10^?8 mol L^?1 for Cu²⁺ and from 2.0 × 10^?5 to 1.0 × 10^?7 mol L^?1 for Hg²⁺, respectively. The limits of detection (S/N = 3) were 3.0 × 10^?8, 4.0 × 10^?8 and 6.7 × 10^?8 mol L^?1 for Ag⁺, Cu²⁺ and Hg²⁺, respectively. A possible mechanism for the inhibition of CdTe QDs and H₂O₂ CL reaction was also discussed. Copyright © 2009 John Wiley & Sons, Ltd.     

A novel chemiluminescence sensor for the determination of indomethacin based on sulfur and nitrogen co‐doped carbon quantum dot–KMnO4 reaction

We report on a simple and sensitive sulfur and nitrogen co‐doped carbon quantum dot (S,N‐CQD)‐based chemiluminescence (CL) sensor for the determination of indomethacin. S,N‐CQDs were prepared by a hydrothermal method and characterized by fluorescence spectra, Fourier transform infrared spectroscopy and transmission electron microscopy. To obtain the best CL system for determination of indomethacin, the reaction of S,N‐CQDs with some common oxidants was studied. Among the tested systems, the S,N‐CQD–KMnO₄ reaction showed the highest sensitivity for the detection of indomethacin. Under optimum conditions, the calibration plot was linear over a concentration range of 0.1–1.5 mg L^?1, with a limit of detection (3σ) of 65 μg L^?1. The method was applied to the determination of indomethacin in environmental and biological samples with satisfactory results.     

Aqueous synthesis of CdTe/CdS/ZnS quantum dots and their optical and chemical properties

In this paper, we described a strategy for synthesis of thiol‐coated CdTe/CdS/ZnS (core–shell–shell) quantum dots (QDs) via aqueous synthesis approach. The synthesis conditions were systematically optimized, which included the size of CdTe core, the refluxing time and the number of monolayers and the ligands, and then the chemical and optical properties of the as‐prepared products were investigated. We found that the mercaptopropionic acid (MPA)‐coated CdTe/CdS/ZnS QDs presented highly photoluminescent quantum yields (PL QYs), good photostability and chemical stability, good salt tolerance and pH tolerance and favorable biocompatibility. The characterization of high‐resolution transmission electron microscopy (HRTEM), X‐ray powder diffraction (XRD) and fluorescence correlation spectroscopy (FCS) showed that the CdTe/CdS/ZnS QDs had good monodispersity and crystal structure. The fluorescence life time spectra demonstrated that CdTe/CdS/ZnS QDs had a longer lifetime in contrast to fluorescent dyes and CdTe QDs. Furthermore, the MPA‐stabilized CdTe/CdS/ZnS QDs were applied for the imaging of cells. Compared with current synthesis methods, our synthesis approach was reproducible and simple, and the reaction conditions were mild. More importantly, our method was cost‐effective, and was very suitable for large‐scale synthesis of CdTe/CdS/ZnS QDs for future applications. Copyright © 2010 John Wiley & Sons, Ltd.     

Tunable excitation properties of ZnCdS:Mn/ZnS quantum dots for cancer imaging

Water‐soluble ZnS:Mn quantum dots (QDs) were synthesized using a hydrothermal method with 3‐mercaptopropionic acid as stabilizer. The optical properties of ZnS:Mn QDs were thoroughly investigated by tuning the doping concentration of Mn²⁺ and the Zn/S precursor ratio, to obtain an optimal parameter for QDs with excellent fluorescence characteristics. ZnS:Mn QDs excited at only one wavelength, however, which seriously limited their further application. Here, a trace Cd ion was doped into a ZnS host, resulting in QD excitation covering a wide adjustable waveband. Furthermore, when a ZnS shell was coated onto the surface of the ZnCdS:Mn QDs, photoluminescence intensity and stability were further enhanced. After coupling with an anti‐CK 19 antibody, the ZnCdS:Mn/ZnS core/shell QDs were able to function by labeling cancer cells, indicating that they could be considered as a suitable bio‐probe for cells and tissue imaging.     

Determination of naphazoline hydrochloride in biological and pharmaceutical samples by a quantum dot‐assisted chemiluminescence system using response‐surface methodology

A simple and highly sensitive chemiluminescence (CL) method is reported for the determination of naphazoline hydrochloride (NH). It was found that the weak CL from the reaction of luminol and KIO₄ in an alkaline medium could be highly amplified by cysteine‐capped cadmium telluride quantum dots (QDs) and the enhanced CL was effectively quenched by NH and this finding was utilized as a basis for the determination of NH. The QDs were synthesized in aqueous medium and characterized by X‐ray diffraction (XRD), transmission electron microscopy (TEM), and UV‐vis and photoluminescence spectroscopy. A possible mechanism was proposed for the CL system based on radical identification experiments, along with CL spectrum of the system. The experimental parameters were optimized by the reliable response surface methodology (RSM). Under the optimized experimental conditions, the proposed method allowed the determination of NH over the range of 5.0 × 10^‐10–2.0 × 10^‐7 mol/L (r² = 0.9993, n = 10). The precision (RSD%) of the method, obtained from five replicate determinations of 2.0 and 150 nmol/L NH, was found to be 1.0% and 1.3%, respectively. The method was successfully applied to the determination of NH in pharmaceutical formulations and human urine and serum samples with results corroborated with the aid of those obtained from a standard method. Copyright © 2014 John Wiley & Sons, Ltd.     

量子点对细菌的标记及抗菌作用

目的量子点是近年来发展起来的一种新型的荧光纳米材料,与传统的材料相比具有独特的性质,所以在生物传感器、实时追踪、多色标记及成像等方面有着广泛的应用。本文主要对量子点在细菌标记和抗菌等方面的应用进行了综述。     

Synthesis of CdSe quantum dots with luminescence in the violet region of the solar spectrum

We have designed a simple, one‐step synthesis of CdSe quantum dots with photoluminescence frequencies ranging from the red through to the violet region of the solar spectrum. The photoluminescence peaks have FWHM of 30 nm indicating absorption over a narrow range of wavelengths. The effect of solvent type and solvent boiling point on the physical and photoluminescence properties of the quantum dots has been studied. High boiling point, non‐polar solvents shift the photoluminescence peak to longer wavelengths and low boiling point, polar solvents shift the photoluminescence peak to shorter wavelengths. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis of carbon‐based quantum dots from starch extracts: Optical investigations

Carbon‐based quantum dots (C‐QDs) were synthesized through microwave‐assisted carbonization of an aqueous starch suspension mediated by sulphuric and phosphoric acids. The as‐prepared C‐QDs showed blue, green and yellow luminescence without the addition of any surface‐passivating agent. The C‐QDs were further analyzed by UV?vis spectroscopy to measure the optical response of the organic compound. The energy gaps revealed narrow sizing of C‐QDs in the semiconductor range. The optical refractive index and dielectric constant were investigated. The C‐QDs size distribution was characterized. The results suggested an easy route to the large scale production of C‐QDs materials.     

Synthesis of near‐infrared‐emitting CdTeSe and CdZnTeSe quantum dots

We exploited the synthesis of near‐infrared (NIR) emitting ternary‐alloyed CdTeSe and quaternary‐alloyed CdZnTeSe quantum dots (QDs) with rod and tetrapod morphologies, which have tunable emission in the NIR electromagnetic spectrum. The morphologies of the QDs depended strongly on their growth kinetics, probably due to the coordinating ligands used in the preparation. Using oleic acid, stearic acid and hexadecylamine as ligands and keeping the same reaction parameters, QDs with tetrapod and rod morphologies were created. Not only had the capping ligands influenced the morphologies of QDs, but also they influenced the optical properties of QDs. The molar ratios of Cd/Zn and Te/Se upon preparation were adjusted for investigating the effect of composition on the properties of resulting QDs. By varying the composition of QDs, the photoluminescence (PL) wavelength of QDs was tuned from 650 nm to 800 nm. To enhance PL efficiency and stability, QDs were coated with a CdZnS shell. As NIR PL has numerous advantages in biological imaging detection, these QDs hold great potential for application. Copyright © 2012 John Wiley & Sons, Ltd.     

Highly luminescent S,N co‐doped carbon quantum dots‐sensitized chemiluminescence on luminol–H2O2 system for the determination of ranitidine

S,N co‐doped carbon quantum dots (N,S‐CQDs) with super high quantum yield (79%) were prepared by the hydrothermal method and characterized by transmission electron microscopy, photoluminescence, UV–Vis spectroscopy and Fourier transformed infrared spectroscopy. N,S‐CQDs can enhance the chemiluminescence intensity of a luminol–H₂O₂ system. The possible mechanism of the luminol–H₂O₂–(N,S‐CQDs) was illustrated by using chemiluminescence, photoluminescence and ultraviolet analysis. Ranitidine can quench the chemiluminescence intensity of a luminol–H₂O₂–N,S‐CQDs system. So, a novel flow‐injection chemiluminescence method was designed to determine ranitidine within a linear range of 0.5–50 μg ml^?1 and a detection limit of 0.12 μg ml^?1. The method shows promising application prospects.