A rapid and high‐throughput method for the determination of serum uric acid based on microarray technology and nanomaterial

Serum uric acid (SUA) is a new therapeutic target for non‐alcoholic fatty liver disease (NAFLD). In this study, we introduced a chemiluminescence (CL) method combined with microarray technology and a simple fabrication procedure to obtain a highly sensitive SUA probe based on a mesoporous metal oxide nanomaterial. The high‐throughput method was based on the generation of H₂O₂ from SUA by immobilized uricase and its measurement by a CL reaction catalyzed by mesoporous metal oxide nanomaterials. The CL probe was designed for SUA The linear range of the uric acid concentration was 0.6–9 μM and the detection limit was 0.1 μM. In comparison with the other SUA detection techniques, this method has the advantages of a low detection limit, high sensitivity and simplicity. A new sensitive high‐throughput approach was obtained for the determination of SUA.     

A colorimetric and fluorogenic probe for bisulfite using benzopyrylium as the recognition unit

A coumarin–benzopyrylium ( CB ) platform has been developed for the colorimetric and fluorogenic detection of bisulfite. The proposed probe utilizes coumarin as the fluorophore and positively charged benzopyrylium as the reaction site. The method employs the nucleophilic addition of bisulfite to the benzopyrylium moiety of CB to inactivate the electron‐deficient oxonium ion. The driving force for photo‐induced electron transfer is considerably diminished, thereby promoting the emission intensity of the coumarin fluorophore. The fluorescence intensity at 510 nm is linear with bisulfite concentration over a range of 0.2–7.5 μM with a detection limit of 42 nM (3δ). CB shows a rapid response (within 30 s) and high selectivity and sensitivity for bisulfite. Preliminary studies show that CB has great potential for bisulfite detection in real samples and in living cells.     

Rapid and visual detection for hypochlorite of an AIE enhanced fluorescence probe

In this paper, a new ‘turn‐on' fluorescence probe for the rapid, sensitive, and visual detection of hypochlorite is reported. The push–pull type trianiline–tricyanofuran‐based fluorescent probe was prepared using a condensation reaction between tricyanofuran and the thiophene–trianiline derivative that had high quantum yields and showed aggregation‐induced emission enhanced properties. Upon exposure to hypochlorite, prominent fluorescence enhancement of the probe was observed via the release of the fluorophore from the probe. The probe showed a ratiometric absorption change at 315 nm and 575 nm. Importantly, the probe showed an excellent detection limit for hypochlorite at 1.2 × 10^?7 M in solution and it was successfully applied for monitoring hypochlorite in waste water by test strip. This work reports a new fluorescence analytical sensing method for hypochlorite that has potential practical value in environmental monitoring and biological discrimination.     

A colorimetric fluorescent probe for rapid and specific detection of nitrite

The method of fluorescent probes has been an important technique for detection of nitrite (NO₂^?). As an important inorganic salt, excessive nitrite would threaten humans and the environment. In this paper, a colorimetric fluorescent probe P‐N (1,2‐diaminoanthraquinone) with rapid response and high selectivity, which could detect NO₂^? by visual colour changes and fluorescence spectroscopy is presented. The probe P‐N solution (pH 1) changed from pink to colourless with the addition of NO₂^? and fluorescence intensity at 639 nm clearly decreased. Good linear exists between fluorescence intensities and NO₂^? concentrations for the range 0–16 μM, and the detection limit was 54 nM (based on a 3σ/slope). Moreover, probe P‐N could also detect NO₂^? in real water samples, and results were all satisfactory. Probe P‐N shows great practical application value for detecting NO₂^? in the environment.     

A new colorimetric and far‐red fluorescent probe for hydrazine with a large red‐shifted absorption spectrum

Recently, growing attention has been paid to the detection of hydrazine (NH₂NH₂) because of its important roles in industrial chemical and high toxicity to human beings. Herein, we have constructed a new colorimetric and far‐red fluorescent probe containing a receptor of 4‐bromobutanoate to selectively detect hydrazine. The probe could detect hydrazine quantitatively in the range of 40–500 μM with the detection limit of 2.9 μM. In addition, the probe could monitor hydrazine by the ratiometric method with a large (185 nm) red‐shifted absorption spectrum, and the color changes from yellow to blue make it as a ‘naked‐eye’ indicator for hydrazine. Consequently, our proposed probe would be of great benefit for monitoring hydrazine in aqueous solution.     

Colorimetric detection of gallic acid based on the enhanced oxidase‐like activity of floral‐like magnetic Fe3O4@MnO2

In this study, a colorimetric method was developed for rapid and sensitive determination of gallic acid (GA) by using floral‐like magnetic Fe₃O₄@MnO₂ composite material with enhanced oxidase‐like activity. Fe₃O₄@MnO₂ composite material is able to oxidize 3,3′,5,5′‐tetramethylbenzidine (TMB) to a blue product (oxTMB) with apparent color change and absorbance at 652 nm. GA can reduce the oxTMB yielding a fading blue color. Based on these results, a technique is proposed to detect GA quantitatively and qualitatively with UV–vis spectroscopy and bare eyes. A low detection limit of 0.105 μM and a detection range of 0.01 to 15 μM were obtained with UV–vis spectroscopy. This methodology possesses high potential for application in determination of GA.     

A carbonothioate‐based highly selective fluorescent probe with a large Stokes shift for detection of Hg2+

Mercury (Hg) is one of the heavy metal pollutants in the environment. Even a very small amount of mercury can cause serious harm to human beings. Herein, we reported a new carbonothioate‐based fluorescent probe for the detection of Hg²⁺ without interference from other metal ions. This probe possessed a very large Stokes shift (192 nm), which could improve the detection sensitivity by minimizing the interferences resulted from self‐absorption or auto‐fluorescence. With the addition of Hg²⁺ to the probe solution, considerable fluorescence enhancement was observed. Additionally, the Hg²⁺ concentration of 0–16 μM and fluorescence intensity showed a good linear relationship (y = 22106× + 53108, R² = 0.9955). Finally, the proposed probe was used to detect Hg²⁺ in real water samples, and its result was satisfactory. Therefore, our proposed probe would provide a promising method for the determination of Hg²⁺ in the environment.     

Copper nanoclusters: an efficient fluorescence sensing platform for quinoline yellow

Fluorescence quenching behavior of artificial food colorant quinoline yellow (QY), on interaction with l ‐cysteine stabilized copper nanoclusters (l ‐Cys‐CuNCs) is investigated in this work. For this purpose, l ‐cysteine stabilized CuNCs were synthesized and characterized using various analytical techniques. Results demonstrated that the synthesized probe (size ~2 nm) had very promising optical features such as bright blue fluorescence, significant quantum yield and excellent photostability. l ‐Cys‐CuNCs can function as a fluorescence sensor by selectively sensing QY among other yellow colorants, giving a detection limit as low as 0.11 μM. The developed sensor exhibited a linear concentration range from 5.50 to 0.20 μM. The developed fluorescence assay was successfully applied for testing commercial samples, thereby making this sensing strategy significant for quality control of food stuffs.     

Fabrication of nitrogen‐ and phosphorous‐doped carbon dots by the pyrolysis method for iodide and iron(III) sensing

A facile and novel strategy to synthesize nitrogen‐ and phosphorous‐doped carbon dots (NPCDs) by single step pyrolysis method is described here. Citric acid is used as carbon source and di‐ammonium hydrogen phosphate is used as both nitrogen and phosphorous sources, respectively. Through the extensive study on optical properties, morphology and chemical structures of the synthesized NPCDs, it is found that as‐synthesized NPCDs exhibited good excitation‐dependent luminescence property, spherical morphology and high stability. The obtained NPCDs are stable in aqueous medium and possess a quantum yield of 10.58%. In this work, a new assay method is developed to detect iodide ions using the synthesized NPCDs. Here, the inner filter effect is applied to detect the iodide ion and exhibited a wide linear response concentration range (10–60 μM) with a limit of detection (LOD) of 0.32 μM. Furthermore, the synthesized NPCDs are used for the selective detection of iron(III) (Fe³⁺) ions and cell imaging. Fe³⁺ ions sensing assay shows a detection range from 0.2 to 30 μM with a LOD of 72 nM. As an efficient photoluminescence sensor, the developed NPCDs have an excellent biocompatibility and low cytotoxicity, allowing Fe³⁺ ion detection in HeLa cells.     

Micellar liquid chromatographic determination of metformin hydrochloride using fluorimetric detection after pre‐column derivatization: application to pharmacokinetic parameters in immediate and sustained release formulations

An accurate and selective method using micellar liquid chromatography was developed to determine metformin hydrochloride both in its pharmaceutical dosage forms and human plasma. Separation was conducted using a Zorbax SB‐Phenyl (250 × 4.6 mm id) stainless steel column at ambient temperature after pre‐column derivatization with 9,10‐phenanthraquinone. A mobile phase composed of 0.1 M sodium dodecyl sulfate, 10% 1‐propanol and triethylamine (0.3%) in 0.02 M phosphoric acid, adjusted to pH 2.5, was used at a flow rate of 1 ml/min with fluorimetric detection at 450 nm after excitation at 306 nm. The proposed method showed high sensitivity with limit of quantification of 0.35 μg/ml and limit of detection of 0.23 μg/ml, being linear from 0.5 to 3.0 μg/ml. Being highly sensitive, the method could be applied to spiked human plasma, and also to follow the pharmacokinetic parameters of the studied drug in healthy volunteers after administration of both its immediate and sustained release tablet formulations. Such procedures were carried out without any extraction steps, which improves the accuracy and precision of the proposed method when applied to human plasma. Detailed validation procedures were also carried out giving results in accordance with the comparison method. The proposed method has also the advantage of being environmentally safe, where the use of organic solvents is highly limited in comparison with other traditional chromatographic separation methods that depend mainly on a high proportion of organic modifiers. This concept, in turn, emphasizes the application of green chemistry in the analysis of pharmaceutical products. The simplicity, relatively low cost and short analysis time of the suggested method makes it a candidate for routine quality control work.     

Hg2+‐selective ratiometric and colorimetric probe based on dansyl–rhodamine and its staining function in cell imaging

A new ratiometric probe composed of a dansyl–rhodamine dyad for the detection of Hg²⁺ via fluorescence resonance energy transfer was designed and synthesized. Rhodamine, dansyl chloride, and hydrazide were selected as the acceptor, donor, and reaction site, respectively. It displayed high selectivity and sensitivity to Hg²⁺ with obvious colour change and fluorescence change due to Hg²⁺‐assisted hydrolysis of rhodamine hydrazide. A good linear relationship ranging from 0 to 16 μM and 0–28 μM for the Hg²⁺ concentration was found based on absorbance and fluorescence assay, respectively. Detection limits of absorbance and fluorescence for Hg²⁺ were calculated to be 1.22 μM and 9.10 μM, respectively.     

Silver‐doped graphite carbon nitride nanosheets as fluorescent probe for the detection of curcumin

Green fluorescent silver (Ag)‐doped graphite carbon nitride (Ag‐g‐C₃N₄) nanosheets have been fabricated by an ultrasonic exfoliating method. The fluorescence of the Ag‐g‐C₃N₄ nanosheets is quenched by curcumin. The fluorescence intensity decreases with the increase in the concentration of curcumin, indicating that the Ag‐g‐C₃N₄ nanosheets can function as a non‐toxic and facile fluorescence probe to detect curcumin. The fluorescence intensity of Ag‐g‐C₃N₄ nanosheets shows a linear relationship to curcumin in the concentration range 0.01–2.00 μM with a low detection limit of 38 nM. The fluorescence quenching process between curcumin and Ag‐g‐C₃N₄ nanosheets mainly is based on static quenching. The fluorescent probe has been successfully applied to analyse curcumin in human urine and serum samples with satisfactory results.     

A simple innovative spectrofluorometric method for the determination of alendronate in bulk and in pharmaceutical tablets

Sodium alendronate is the first in a pharmacological class known as bisphosphonates, used for treatment of various bone diseases. Assay of bisphosphonates by a spectroscopic technique is very challenging due to the fact that they lack chromophores and none of them are fluorescent. In this work, a simple method is presented for determination of alendronate in bulk and in pharmaceutical tablets using spectrofluorometry by exploiting the ability of alendronate to displace salicylate from the iron(III)–salicylate chelate, forming a non‐fluorescent colorless iron(III)–alendronate complex. The liberated salicylate is fluorescent and is equivalent to the mount of alendronate added. The response was linear over the concentration range 20–90 μM and the proposed method was validated according to the guidelines of the International Conference on Harmonization. The correlation coefficient was found to be 0.995 and the limit of detection was 7.5 μM. The method was successfully applied for determination of alendronate in the commercially available Osteonate® tablets. The average percent recovery ± percent relative standard deviation was found to be 102.118 ± 2.033 which is congruent with the label claim of the dosage form. The results were also compared to a reported method using t‐test and F‐test at 95% confidence level; no significant differences were observed. The presented method is simple, fast, easy, cost‐effective and suitable for routine pharmaceutical analysis.     

Two‐channel near‐infrared fluorescence Ag+ ion sensing of a new star‐shaped dendrimer

A new near‐infrared fluorescence sensor PDI‐PD for Ag⁺ ions was successfully prepared and its structure characterized by ¹H nuclear magnetic resonance (NMR), ¹³C NMR and high‐resolution mass spectrometry; matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (HRMS MALDI‐TOF). The probe exhibited rapid, sensitive, and selective two‐channel fluorescence responses towards Ag⁺ ions and protons. The probe has a marked high binding affinity and high sensitivity for Ag⁺, with a detection limit of 1.4 × 10^?6 M. An approximately five‐fold enhanced core emission at 784 nm was attributed to fluorescence resonance energy transfer (FRET). The enhanced core emission of the probe with Ag⁺ ions based on photo‐induced electron transfer and FRET is discussed. In addition, the probe presented a visible colour change. All experimental results demonstrated that PDI‐PD is an efficient tool for the selective, sensitive and rapid detection of Ag⁺ ions and protons using two‐channel fluorescence responses.     

Copper nanoclusters as fluorescence‐quenching probes for the quantitative analysis of total iodine

Tannic acid‐coated copper nanoclusters (CuNCs@TA) were synthesized and used quantitatively to analyze iodine in kelp. Compared with other methods for iodine detection, the proposed method showed excellent performance. The iodine‐induced linear decrease in the fluorescence intensity of CuNCs@TA allowed the quantitative detection of iodine in the range 20–100 μM, and the limit of detection for iodine was 18 nM. The probe can be used for the determination of iodine in real samples with reliable and accurate results. Modified Stern–Volmer equation and thermodynamic calculation studies were used to discuss the quenching mechanism.     

High‐yield production of a human monoclonal IgG by rhizosecretion in hydroponic tobacco cultures

Rhizosecretion of recombinant pharmaceuticals from in vitro hydroponic transgenic plant cultures is a simple, low cost, reproducible and controllable production method. Here, we demonstrate the application and adaptation of this manufacturing platform to a human antivitronectin IgG₁ monoclonal antibody (mAb) called M12. The rationale for specific growth medium additives was established by phenotypic analysis of root structure and by LC‐ESI‐MS/MS profiling of the total protein content profile of the hydroponic medium. Through a combination of optimization approaches, mAb yields in hydroponic medium reached 46 μg/mL in 1 week, the highest figure reported for a recombinant mAb in a plant secretion‐based system to date. The rhizosecretome was determined to contain 104 proteins, with the mAb heavy and light chains the most abundant. This enabled evaluation of a simple, scalable extraction and purification protocol and demonstration that only minimal processing was necessary prior to protein A affinity chromatography. MALDI‐TOF MS revealed that purified mAb contained predominantly complex‐type plant N‐glycans, in three major glycoforms. The binding of M12 purified from hydroponic medium to vitronectin was comparable to its Chinese hamster ovary (CHO)‐derived counterpart. This study demonstrates that in vitro hydroponic cultivation coupled with recombinant protein rhizosecretion can be a practical, low‐cost production platform for monoclonal antibodies.     

Boron and nitrogen co‐doped carbon dots as a sensitive fluorescent probe for the detection of curcumin

In this present study, a fluorescent probe was developed to detect curcumin, which is derived from the rhizomes of the turmeric. We used a simple and economical way to synthesize boron and nitrogen co‐doped carbon dots (BNCDs) by microwave heating. The maximum emission wavelength of the BNCDs was 450 nm at an excitation wavelength of 360 nm. The as‐prepared BNCDs were characterized by multiple analytical techniques such as transmission electron microscopy, X‐ray photoelectron spectroscopy, X‐ray diffraction, and infrared spectroscopy. The synthesized carbon nanoparticles had an average particle diameter of 4.23 nm. The BNCDs exhibited high sensitivity to the detection of curcumin at ambient conditions. The changes of BNCDs fluorescent intensity show a good linear relationship with the curcumin concentrations in the range 0.2–12.5 μM. This proposed method has been successfully applied to detect the curcumin in urine samples with the recoveries of 96.5–105.5%.     

Methylene blue-based 7-nitro-1,2,3-benzoxadiazole NIR fluorescent probe triggered by H2S

A new Methylene blue–based 7-nitro-1,2,3-benzoxadiazole NIR fluorescent probe 3, 7-bis-dimethylamino-10-(7-nitrobenzo[c][1,2,5]oxadiazol-4-yl)-10H-phenothiazine (leuco-MB-NBD) was designed and synthesized. Leuco-MB-NBD showed high sensitivity and selectivity for H₂S as a fluorescent probe in C₂H₅OH-PBS (9:1, v/v, pH = 7.4) solution, this fluorescent assay showed a linear range of 0–50.0 μM and a LOD (limit of detection) of 0.43 μM. Moreover, the probe leuco-MB-NBD has lower toxicity at low concentrations to HCT-116 cells and can be used for cell imaging. Additionally, Leuco-MB-NBD is triggered by hydrogen sulfide to generate methylene blue, methylene blue which has potential rescuing effects on the mitochondrial activity can act as an antidote against sulfide intoxication.     

Signal‐on fluorescence assay for pyrophosphate ions based on DNA‐stabilized silver nanoclusters

Pyrophosphate anion (P₂O₇^4?, PPi) is considered as a potential biomarker for arthritic diseases because high levels of PPi may result in calcium pyrophosphate dehydrate crystal deposition diseases. In this study, a simple fluorescence method for PPi was demonstrated by organic integration of the efficient fluorescence quenching ability of copper ions to DNA‐scaffolded silver nanoclusters and the strong affinity of PPi towards copper ions. This simple fluorescence sensor showed a low detection limit (0.28 μM based on signal/noise = 3) towards the detection of PPi. Practical application of this method was also validated by detection of PPi in the synovial fluid.     

IgY‐binding peptide screened from a random peptide library as a ligand for IgY purification

Chicken egg yolk immunoglobulin (IgY) is a functional substitute for mammalian IgG for antigen detection. Traditional IgY purification methods involve multi‐step procedures resulting in low purity and recovery of IgY. In this study, we developed a simple IgY purification system using IgY‐specific peptides identified by T7 phage display technology. From disulfide‐constrained random peptide libraries constructed on a T7 phage, we identified three specific binding clones (Y4‐4, Y5‐14, and Y5‐55) through repeated biopanning. The synthetic peptides showed high binding specificity to IgY‐Fc and moderate affinity for IgY‐Fc (K_d: Y4‐4 = 7.3 ± 0.2 μM and Y5‐55 = 4.4 ± 0.1 μM) by surface plasmon resonance analysis. To evaluate the ability to purify IgY, we performed immunoprecipitation and affinity high‐performance liquid chromatography using IgY‐binding peptides; the result indicated that these peptides can be used as affinity ligands for IgY purification. We then used a peptide‐conjugated column to purify IgY from egg yolks pre‐treated using an optimized delipidation technique. Here, we report the construction of a cost‐effective, one‐step IgY purification system, with high purity and recovery. © 2017 The Authors. Journal of Peptide Science published by European Peptide Society and John Wiley & Sons Ltd.