Probing the optical properties and luminescence mechanism of a UV‐emitting SrBPO5:Ce3+ phosphor

Ce‐doped (1 × 10^?5 to 3.0 mol%) SrBPO₅ phosphors were synthesized using a conventional solid‐state reaction route at 1273 K in an air atmosphere. Phase and morphology of the samples were studied from powder X‐ray diffraction (XRD) patterns and scanning electron microscope (SEM) micrographs, respectively. The band gap energies of the pure and Ce‐doped SrBPO₅ phosphors were calculated from the recorded diffuse reflectance spectra. Photoluminescence (PL) and Ce³⁺ lifetime were recorded at 300 and 77 K. Photoluminescence lifetime measurements revealed two‐lifetime values for Ce³⁺ at both 300 K (17 and 36 nsec) and 77 K (12 and 30 nsec), suggesting the presence of two different environments around Ce³⁺. Time‐resolved emission spectroscopy (TRES) studies confirmed the presence of Ce³⁺ in two different environments. In addition, SrBPO₅:Ce exhibited intense UV emission, signifying its possible use as an efficient sensitizer for solid‐state lighting applications. The effect of γ‐irradiation on PL was also determined. Thermally stimulated luminescence (TSL) glow curves of the γ‐irradiated phosphor, along with trap parameters, dose–response, and the possible TSL mechanism were also investigated. Positron annihilation lifetime spectroscopy was carried out to probe defects present in undoped and Ce‐doped SrBPO₅.     

Photoluminescence,cathodoluminescence and thermal stability of Sm3+‐activated Sr3La(VO4)3 red‐emitting phosphors

A series of Sm³⁺‐activated Sr₃La(VO₄)₃ phosphors were synthesized by a facile sol‐gel method. X‐ray diffraction patterns and photoluminescence (PL)/cathodoluminescence (CL) spectra as well as PL decay curves were employed to characterize the obtained samples. Upon 402 nm light excitation, the characteristic emissions of Sm³⁺ ions corresponding to ⁴G_5/2→⁶H_J transitions were observed in all the as‐prepared products. The PL emission intensity was increased with increase in Sm³⁺ ion concentration, while concentration quenching occurred when the doping concentration was over 4 mol%. The non‐radiative energy transfer mechanism for concentration quenching of Sm³⁺ ions was dominated by dipole–dipole interaction and the critical distance was around 21.59 Å. Furthermore, temperature‐dependent PL emission spectra revealed that the obtained phosphors possessed good thermal stability with an activation energy of 0.19 eV. In addition, the CL spectra of the samples were almost the same as the PL spectra, and the CL emission intensity showed a tendency to increase with increase in accelerating voltage and filament current. These results suggest that the Sm³⁺‐activated Sr₃La(VO₄)₃ phosphors with good color coordinates, high color purity and superior thermal stability may be a potential candidate for applications in white light‐emitting diodes and field‐emission displays as red‐emitting phosphors.     

Identifying the Real Minority Carrier Lifetime in Nonideal Semiconductors: A Case Study of Kesterite Materials

Time‐resolved photoluminescence (TRPL) is a powerful characterization technique to study carrier dynamics and quantify absorber quality in semiconductors. The minority carrier lifetime, which is critically important for high‐performance solar cells, is often derived from TRPL analysis. However, here it is shown that various nonideal absorber properties can dominate the TRPL signal making reliable extraction of the minority carrier lifetime not possible. Through high‐resolution intensity‐, temperature‐, voltage‐dependent, and spectrally resolved TRPL measurements on absorbers and devices it is shown that photoluminescence (PL) decay times for kesterite materials are dominated by minority carrier detrapping. Therefore, PL decay times do not correspond to the minority carrier lifetime for these materials. The lifetimes measured here are on the order of hundreds of picoseconds in contrast to the nanosecond lifetimes suggested by the decay curves. These results are supported with additional measurements, device simulation, and comparison with recombination limited PL decays measured on Cu(In,Ga)Se₂. The kesterite material system is used as a case study to demonstrate the general analysis of TRPL data in the limit of various measurement conditions and nonideal absorber properties. The data indicate that the current bottleneck for kesterite solar cells is the minority carrier lifetime.     

Luminescence study on Mn,Ni co‐doped zinc sulfide nanocrystals

Zinc sulfide (ZnS) doped with transition metal has been used as phosphor for various optoelectronic applications. In the present report, ZnS:Mn doped and ZnS:Mn,Ni co‐doped were prepared using chemical co‐precipitation method using polyvinyl pyrolidone as a surfactant. The structural studies were carried out using an X‐ray diffraction technique; optical studies have been performed using ultraviolet–visible light absorption and photoluminescence (PL) spectroscopy. The presences of functional groups were confirmed using Fourier transform infrared spectroscopy. The X‐ray diffraction study and Reitveld analysis confirms the formation of cubic phase with crystalline size 2–3 nm for undoped and doped ZnS nanoparticles. A novel and enhanced luminescence characteristic have been observed in PL spectra. The luminescence intensity of Mn,Ni co‐doped ZnS in the blue region is much higher of that of ZnS. The PL results indicate that the doping of Ni creates shallow trap states or luminescence centres in the forbidden energy gap, which quenches the Mn states emission. Concentration quenching has been observed in Mn‐doped ZnS nanoparticles. From CIE coordinates, it is seen that the yellow and blue light emission of ZnS:Mn,Ni co‐doped nanophosphor may be a promising candidate for display devices and phosphor converted light‐emitting diode applications.     

Luminescence properties of a nanoporous freshwater diatom

Freshwater diatom frustules show special optical properties. In this paper we observed luminescence properties of the freshwater diatom Cyclotella meneghiniana. To confirm the morphological properties we present scanning electron microscopy (SEM) images. X‐ray diffraction (XRD) studies were carried out to visualize the structural properties of the frustules, confirming that silica present in diatom frustules crystallizes in an α‐quartz structure. Study of the optical properties of the silica frustules of diatoms using ultra‐violet‐visible (UV‐vis) spectroscopy and photoluminescence spectroscopy confirmed that the diatom C. meneghiniana shows luminescence in the blue region of the electromagnetic spectrum when irradiated with UV light. This property of diatoms can be exploited to obtain many applications in day‐to‐day life. Also, using time‐resolved photoluminescence spectroscopy (TRPL) it was confirmed that this species of diatom shows bi‐exponential decay. Copyright © 2011 John Wiley & Sons, Ltd.     

Investigation on the pH‐independent photoluminescence emission from carbon dots impregnated on polymer matrix

Highly luminescent, polymer nanocomposite films based on poly(vinyl alcohol) (PVA), and monodispersed carbon dots (C‐dots) derived from multiwalled carbon nanotubes (MWCNTs), as coatings on substrates as well as free standing ones are obtained via solution‐based techniques. The synthesized films exhibit pH‐independent photoluminescence (PL) emission, which is an advantageous property compared with the pH‐dependent photoluminescence intensity variations, generally observed for the C‐dots dispersed in aqueous solution. The synthesized C‐dots and the nanocomposite films are characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), X‐ray diffraction (XRD), Fourier transform infra‐red spectroscopy ( FTIR), ultraviolet (UV) ? visible spectroscopy and photoluminescence spectroscopy (PL) techniques. The TEM image provides clear evidence for the formation of C‐dots of almost uniform shape and average size of about 8 nm, homogeneously dispersed in aqueous medium. The strong anchoring of C‐dots within the polymer matrix can be confirmed from the XRD results. The FTIR spectral studies conclusively establish the presence of oxygen functional groups on the surfaces of the C‐dots. The photoluminescence (PL) emission spectra of the nanocomposite films are broad, covering most part of the visible region. The PL spectra do not show any luminescence intensity variations, when the pH of the medium is changed from 1 to 11. The pH‐independent luminescence, shown by these films offers ample scope for using them as coatings for designing diagnostic and imaging tools in bio medical applications. The non‐toxic nature of these nanocomposite films has been established on the basis of cytotoxicity studies.     

Water‐soluble mercaptoundecanoic acid (MUA)‐coated CdTe quantum dots: one‐step microwave synthesis,characterization and cancer cell imaging

ABSTRACT: In this study, a one‐step approach for aqueous synthesis of highly luminescent semiconductors, CdTe quantum dots (QDs), using long‐chain thiols‐mercaptoundecanoic acid (MUA) as surface ligand, was developed in a microwave irradiation system. The synthetic conditions were systematically investigated. The as‐prepared MUA‐coated QDs were characterized by various spectroscopy techniques, transmission electron microscopy (TEM) and X‐ray powder diffraction (XRD). The experimental results document that MUA‐coated CdTe QDs have small diameter, good stability, high luminescence and long lifetime. Particularly, it was confirmed, using fluorescence correlation spectroscopy (FCS) that, compared with other ligand, MUA formed a thicker ligand layer on the QD surfaces, which will help their stability and conjugation with biomolecules. Furthermore, MUA‐coated QDs were successfully used for HeLa cell imaging. Copyright © 2011 John Wiley & Sons, Ltd.     

High‐speed X‐ray‐induced luminescence computed tomography

X‐ray‐induced luminescence computed tomography (XLCT) is an emerging molecular imaging. Challenges in improving spatial resolution and reducing the scan time in a whole‐body field of view (FOV) still remain for practical in vivo applications. In this study, we present a novel XLCT technique capable of obtaining three‐dimensional (3D) images from a single snapshot. Specifically, a customed two‐planar‐mirror component is integrated into a cone beam XLCT imaging system to obtain multiple optical views of an object simultaneously. Furthermore, a compressive sensing based algorithm is adopted to improve the efficiency of 3D XLCT image reconstruction. Numerical simulations and experiments were conducted to validate the single snapshot X‐ray‐induced luminescence computed tomography (SS‐XLCT). The results show that the 3D distribution of the nanophosphor targets can be visualized much faster than conventional cone beam XLCT imaging method that was used in our comparisons while maintaining comparable spatial resolution as in conventional XLCT imaging. SS‐XLCT has the potential to harness the power of XLCT for rapid whole‐body in vivo molecular imaging of small animals.     

Sensitization enhancement of europium in ZnSe/ZnS core/shell quantum dots induced by efficient energy transfer

Eu‐doped ZnSe:/ZnS quantum dots (formed as ZnSe:Eu/ZnS QDs) were successfully synthesized by a two‐step wet chemical method: nucleation doping and epitaxial shell growing. The sensitization characteristics of Eu‐doped ZnSe and ZnSe/ZnS core/shell QD are studied in detail using photoluminescence (PL), PL excitation spectra (PLE) and time‐resolved PL spectroscopy. The emission intensity of Eu ions is enhanced and that of ZnSe QDs is decreased, implying that energy was transferred from the excited ZnSe host materials (the donor) to the doped Eu ions (the acceptor). PLE reveals that the ZnSe QDs act as an antenna for the sensitization of Eu ions through an energy transfer process. The dynamics of ZnSe:Eu/ZnS core/shell quantum dots with different shell thicknesses and doping concentrations are studied via PL spectra and fluorescence lifetime spectra. The maximum phosphorescence efficiency is obtained when the doping concentration of Eu is approximately 6% and the sample showed strong white light under ultraviolet lamp illumination. By surface modification with ZnS shell layer, the intensity of Eu‐related PL emission is increased approximately three times compared with that of pure ZnSe:Eu QDs. The emission intensity and wavelength of ZnSe:Eu/ZnS core/shell quantum dots can be modulated by different shell thickness and doping concentration. The results provide a valuable insight into the doping control for practical applications in laser, light‐emitting diodes and in the field of biotechnology. Copyright © 2014 John Wiley & Sons, Ltd.     

UV or blue light excited red persistent perovskite phosphor with millisecond lifetime for use in AC‐LEDs

Energy storage phosphors with millisecond period afterglow that compensate for the diming time of alternating current light‐emitting diodes (AC‐LEDs) have promising application. To obtain a persistent luminescence (PersL) white colour in AC‐LEDs, we focussed on a red afterglow with short period phosphorescence. Ca₄Ti₃O₁₀ forms a type of perovskite‐related Ruddlesden–Popper phase structure. Doping Pr³⁺ ions into Ca₄Ti₃O₁₀, an ideal red PersL was obtained. X‐ray diffraction and element analysis demonstrated that our target samples were crystallized well. Steady‐state and afterglow luminescence properties were investigated in detail. Notably, the PersL intensity was dependent on various excitation wavelengths. By measuring three‐dimensional thermoluminescence spectra, we found that the trap depths showed a continuous distribution and that the shallowest trap contributed to the millisecond afterglow. Two PersL mechanism models were used to elucidate the electron charging and de‐trapping processes under UV or blue light activation.     

The size effect to O2−–Ce4+ charge transfer emission and band gap structure of Sr2CeO4

Sr₂CeO₄ phosphors with different crystalline sizes were synthesized by the sol–gel method or the solid‐state reaction. Their crystalline size, luminescence intensity of O^2??Ce⁴⁺ charge transfer and energy gaps were obtained through the characterization by X‐ray diffraction, photoluminescence spectra, as well as UV–visible diffuse reflectance measurements. An inverse relationship between photoluminescence (PL) spectra and crystalline size was observed when the heating temperature was from 1000°C to 1300°C. In addition, band energy calculated for all samples showed that a reaction temperature of 1200°C for the solid‐state method and 1100°C for sol–gel method gave the largest values, which corresponded with the smallest crystalline size. Correlation between PL intensity and crystalline size showed an inverse relationship. Band structure, density of states and partial density of states of the crystal were calculated to analyze the mechanism using the cambrige sequential total energy package (CASTEP) module integrated with Materials Studio software.     

Lanthanide Circularly Polarized Luminescence: Bases and Applications

Lanthanide (III) luminescence is very characteristic: it is characterized by narrow emission bands, large Stokes shift, and a long excited state lifetime. Moreover, chiral lanthanide complexes can emit strongly circularly polarized light in a way that is almost precluded to purely organic molecules. Thanks to the sensitivity and specificity of the Ln circularly polarized luminescence (CPL) signal, CPL‐active complexes are therefore employed as bioanalytical tools and other uses can be envisaged in many other fields. Here we present a brief overview of the most recently developed CPL‐active lanthanide complexes and a selected few examples of their applications. We briefly discuss the main mechanisms that can rationalize the observed outstanding CPL properties of these systems, and some practical suggestions on how to measure and report data. Chirality 27:1–13, 2015. © 2014 Wiley Periodicals, Inc.     

Synthesis,characterization and optical studies of highly luminescent ZnS nanoparticles associated with hypromellose matrix as a green and novel stabilizer

ZnS nanoparticles stabilized by a carbohydrate‐based matrix, hypromellose (hydroxypropyl methylcellulose) were prepared via a wet chemical method. The nanocomposite was characterized by X‐ray diffraction, transmission electon microscopy and Fourier transform infrared spectroscopy. X‐Ray diffraction patterns revealed a zinc blende structure. Thermogravimetric analysis suggested that polymer attached to the surface decomposes at 700 °C. Absorption measurements were carried out and calculation of the diameter polydispersity index (DPI) suggests the formation of monodisperse nanoparticles. The optical properties of the as‐prepared samples were studied by UV/vis spectroscopy and steady‐state photoluminescence (PL) spectroscopy. The PL studies indicate the applicability of these nanoparticles as biocompatible sensors or luminescence markers in future. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and characterization of pure and Li+ activated Alq3 complexes for green and blue organic light emitting diodes and display devices

Pure and Li⁺‐doped Alq₃ complexes were synthesized by simple precipitation method at room temperature, maintaining the stoichiometric ratio. These complexes were characterized by X‐ray diffraction, ultraviolet‐visible absorption and Fourier transform infrared and photoluminescence (PL) spectra. X‐ray diffraction analysis reveals the crystalline nature of the synthesized complexes, while Fourier transform infrared spectroscopy confirm the molecular structure, the completion of quinoline ring formation and presence of quinoline structure in the metal complex. Ultraviolet‐visible and PL spectra revealed that Li⁺ activated Alq₃ complexes exhibit the highest intensity in comparison to pure Alq₃ phosphor. Thus, Li⁺ enhances PL emission intensity when doped into Alq₃ phosphor. The excitation spectra lie in the range of 383–456 nm. All the synthesized complexes other than Liq give green emission, while Liq gives blue emission with enhanced intensity. Thus, he synthesized phosphors are the best suitable candidates for green‐ and blue‐emitting organic light emitting diode, PL liquid‐crystal display and solid‐state lighting applications. Copyright © 2013 John Wiley & Sons, Ltd.     

Tuneable luminescence properties of EDTA‐assisted ZnS:Mn nanocrystals from a yellow‐orange to a red emission band

Luminescence technology has been improved with the help of semiconductor nanoparticles that possess novel optical and electrical properties compared with their bulk counterpart. The aim of this study was to design semiconductor nanocrystals in their pure (ZnS) or doped form (ZnS:Mn) with different concentrations of Mn²⁺ ions by a wet chemical route stabilized by ethylenediamine tetra‐acetic acid (EDTA) and to evaluate their luminescence properties. The nanocrystals were characterized by physicochemical techniques such as X‐ray diffraction (XRD), High‐resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SEAD), EDS, and ultraviolet (UV)–visible light and photoluminescence (PL) studies. These results showed the presence of cubic phase and spherically shaped nanocrystals. A blue shift with respect to their bulk counterpart was observed. PL emission spectra were observed with a fixed blue peak and the yellow‐orange bands were red shifted towards the red region under the same excitation wavelength. The orange‐red bands were attributed to the radiation transition of electrons in 3d5 unfilled shells of Mn²⁺ ions [⁴T₁(⁴G)‐⁶A₁(⁶S)]; the ZnS matrix varied with Mn²⁺ concentration. Shift and increase in the intensity of the PL and absorption bands were observed with increase in Mn content. The study showed that Mn²⁺‐doped ZnS nanocrystal emission bands can be tuned from the yellow‐orange to the red regions under a controlled synthesis process and could be used as promising luminescent emitters in the biology field upon functionalization with suitable materials. Further studies on construction with various other materials will be useful for practical applications.     

Improving the Performance and Stability of Inverted Planar Flexible Perovskite Solar Cells Employing a Novel NDI‐Based Polymer as the Electron Transport Layer

A new naphthalene diimide (NDI)‐based polymer with strong electron withdrawing dicyanothiophene (P(NDI2DT‐TTCN)) is developed as the electron transport layer (ETL) in place of the fullerene‐based ETL in inverted perovskite solar cells (Pero‐SCs). A combination of characterization techniques, including atomic force microscopy, scanning electron microscopy, grazing‐incidence wide‐angle X‐ray scattering, near‐edge X‐ray absorption fine‐structure spectroscopy, space‐charge‐limited current, electrochemical impedance spectroscopy, photoluminescence (PL), and time‐resolved PL decay, is used to demonstrate the interface phenomena between perovskite and P(NDI2DT‐TTCN) or [6,6]‐phenyl‐C61‐butyric acid methyl ester (PCBM). It is found that P(NDI2DT‐TTCN) not only improves the electron extraction ability but also prevents ambient condition interference by forming a hydrophobic ETL surface. In addition, P(NDI2DT‐TTCN) has excellent mechanical stability compared to PCBM in flexible Pero‐SCs. With these improved functionalities, the performance of devices based on P(NDI2DT‐TTCN) significantly outperform those based on PCBM from 14.3 to 17.0%, which is the highest photovoltaic performance with negligible hysteresis in the field of polymeric ETLs.     

Luminescence study and dosimetry approach of Ce on an α‐Sr2P2O7 phosphor synthesized by a high‐temperature combustion method

We report synthesis of a cerium‐activated strontium pyrophosphate (Sr₂P₂O₇) phosphor using a high‐temperature combustion method. Samples were characterized by X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FT‐IR), photoluminescence (PL) and thermoluminescence (TL). The XRD pattern reveals that Sr₂P₂O₇ has an α‐phase with crystallization in the orthorhombic space group of Pnam. The IR spectrum of α‐Sr₂P₂O₇ displays characteristic bands at 746 and 1190 cm^‐1 corresponding to the absorption of (P₂O₇)^‐4. PL emission spectra exhibit a broad emission band around 376 nm in the near‐UV region due to the allowed 5d–4f transition of cerium and suggest its applications in a UV light‐emitting diode (LED) source. PL also reveals that the emission originates from 5d–4f transition of Ce³⁺ and intensity increases with doping concentration. TL measurements made after X‐ray irradiation, manifest a single intense glow peak at around 192°C, which suggests that this is an outstanding candidate for dosimetry applications. The kinetic parameters, activation energy and frequency factor of the glow curve were calculated using different analysis methods. Copyright © 2014 John Wiley & Sons, Ltd.     

Photoluminescence property of A9B(VO4)7 [A = Ca,Sr, Ba and B = La,Gd] phosphors

A new efficient phosphor, A₉B(VO₄)₇ [A = Ca, Sr, Ba and B = La, Gd] has been synthesized by the solid‐state method at high temperature. X‐ray diffraction analysis confirmed the formation of the compound. Photoluminescence excitation measurements show that the phosphor can be efficiently excited by near‐ultraviolet light from 300 nm to 400 nm to realize emission covering the 397–647 nm region of visible spectrum. Therefore, newly synthesized novel phosphor may be useful as green‐emitting phosphor in solid‐state lighting. Copyright © 2012 John Wiley & Sons, Ltd.     

A novel in vivo Cerenkov luminescence image‐guided surgery on primary and metastatic colorectal cancer

Intraoperative Cerenkov luminescence imaging (CLI) can effectively improve the performance of tumor surgery. Nevertheless, the existing approaches are still unsatisfying to the clinical demands of open surgery. This study develops a novel intraoperative in vivo CLI approach to investigate the potential and value of Cerenkov luminescence (CL) image‐guided surgery. A system characterized with high sensitivity (19.61 kBq mL^{?1 18}F‐FDG) and desirable spatial resolution (88.34 μm) is developed. CL image‐guided surgery is performed on colorectal cancer (CRC) models of mice and swine. Tumor surgery is guided by the static CL images, and the resection quality is evaluated quantitatively and contrasted with other imaging modalities exemplified by bioluminescence imaging (BLI). The in vivo results demonstrated the effectiveness of the proposed intraoperative CLI approach for removing primary and metastatic CRC. Safety of performing in vivo CL image‐guided surgery is verified as well through radiation measurements of related staffs. Overall, the developed intraoperative in vivo CLI approach can efficiently improve the cancer treatment.     

Stimulation of luminescence of mycelium of luminous fungus Neonothopanus nambi by ionizing radiation

The luminescent system of higher luminous fungi is not fully understood and the enzyme/substrate pair of the light emission reaction has not been isolated. It was suggested that luminescence of fungi involves oxidase‐type enzymes, and reactive oxygen species are important for fungal light production. Generation of reactive oxygen species can be stimulated by ionizing irradiation, which has not been studied for luminous fungi. We report the effect of X‐irradiation on the luminescence of fungus Neonothopanus nambi. Experiments were performed with mycelium on a home‐built setup based on an X‐ray tube and monochromator/photomultiplier tube. Application of X‐rays does not change the emission spectrum, but after approximately 20 min of continuous irradiation, light production from unsupported mycelium starts growing and increases up to approximately five times. After peaking, its level decreases irrespective of the presence of X‐irradiation. After staying at a certain level, light production collapses to zero, which is not related to the drying of the mycelium or thermal impact of radiation. The observed shape of kinetics is characteristic of a multistage and/or chain reaction. The time profile of light production must reflect the current levels of radicals present in the system and/or the activity of enzyme complexes involved in light production. Copyright © 2014 John Wiley & Sons, Ltd.