Sensitive and selective detection of Cu(II) ion: A new effective 1,8‐naphthalimide‐based fluorescence ‘turn off’ sensor

The present study reports the development of a new 1,8‐naphthalimide‐based fluorescent sensor V for monitoring Cu(II) ions. The sensor exhibited pH independence over a wide pH range 2.52–9.58, and indicated its possible use for monitoring Cu(II) ions in a competitive pH medium. The sensor also showed high selectivity and sensitivity towards the Cu(II) ions over other competitive metal ions in DMSO–HEPES buffer (v/v, 1:1; pH 7.4) with a fluorescence ‘turn off’ mode of 79.79% observed. A Job plot indicated the formation of a 1:1 binding mode of the sensor with Cu(II) ions. The association constant and detection limit were 1.14 × 10⁶ M^–1 and 4.67 × 10^–8 M, respectively. The fluorescence spectrum of the sensor was quenched due to the powerful paramagnetic nature of the Cu(II) ions. Potential application of this sensor was also demonstrated when determining Cu(II) ion levels in two different water samples.     

A highly selective fluorescent sensor for mercury ion (II) based on azathia-crown ether possessing a dansyl moiety

An intramolecular charge transfer (ICT) fluorescent sensor 1 using a dansyl moiety as the fluorophore and an azathia-crown ether as the receptor was designed, synthesized and characterized. The ions-selective signaling behaviors of the sensor 1 were investigated in CH(3) CN-H(2) O (1:1, v/v) by fluorescence spectroscopy. It exhibited remarkable fluorescence quenching upon addition of Hg(2+), which was attributed to the 1:1 complex formation between 1 and Hg(2+), while other selected metal ions induced basically no spectral changes. The sensor 1 showed a rapid and linear response towards Hg(2+) in the concentration range from 5.0 × 10(-7) to 1.0 × 10(-5) mol L(-1) with the detection limit of 1.0 × 10(-7) mol L(-1). Furthermore, the whole process could be carried out in a wide pH range of 2.0-8.0 and was not disturbed by other metal ions. Thus, the sensor 1 was used for practical determination of Hg(2+) in different water samples with satisfactory results.     

Ratiometric and selective fluorescent chemodosimeter for Cu(II) by Cu(II)‐induced oxidation

A new rhodamine derivative, rhodamine B 4‐N,N‐dimethylaminobenzaldehyde hydrazone (1), was designed for ratiometric sensing of Cu(II) selectively. A red‐shift from 515 to 585 nm was observed in the fluorescence spectrum when Cu(II) was added to 1 in acetonitrile. Other metal ions of interest showed no ratiometric response. The interaction between Cu(II) and 1 was found to be the Cu(II)‐induced oxidation of 1. Copyright © 2008 John Wiley & Sons, Ltd.     

A highly selective and simple fluorescent sensor for mercury (II) ion detection based on cysteamine‐capped CdTe quantum dots synthesized by the reflux method

Cysteamine (CA)‐capped CdTe quantum dots (QDs) (CA–CdTe QDs) were prepared by the reflux method and utilized as an efficient nano‐sized fluorescent sensor to detect mercury (II) ions (Hg²⁺). Under optimum conditions, the fluorescence quenching effect of CA–CdTe QDs was linear at Hg²⁺ concentrations in the range of 6.0–450 nmol/L. The detection limit was calculated to be 4.0 nmol/L according to the 3σ IUPAC criteria. The influence of 10‐fold Pb²⁺, Cu²⁺ and Ag⁺ on the determination of Hg²⁺ was < 7% (superior to other reports based on crude QDs). Furthermore, the detection sensitivity and selectivity were much improved relative to a sensor based on the CA–CdTe QDs probe, which was prepared using a one‐pot synthetic method. This CA–CdTe QDs sensor system represents a new feasibility to improve the detection performance of a QDs sensor by changing the synthesis method. Copyright © 2014 John Wiley & Sons, Ltd.     

Terbium (III) coordination polymer–copper (II) compound as fluorescent probe for time‐resolved fluorescence ‘turn‐on’ detection of hydrogen sulfide

With recognition of the biological importance of hydrogen sulfide (H₂S), we present a simple and effective fluorescent probe for H₂S using a Tb³⁺ coordination polymer–Cu²⁺ compound (DPA/Tb/G–Cu²⁺). Dipicolinic acid (DPA) and guanosine (G) can coordinate with Tb³⁺ to form a macromolecular coordination polymer (DPA/Tb/G). DPA/Tb/G specifically binds to Cu²⁺ in the presence of coexisting cations, and obvious fluorescence quenching is observed. The quenched fluorescence can be exclusively recovered upon the addition of sulfide, which is measured in the mode of time‐resolved fluorescence. The fluorescence intensities of the DPA/Tb/G–Cu²⁺ compound enhance linearly with increasing sulfide concentrations from 1 to 30 μM. The detection limit for sulfide in aqueous solution is estimated to be 0.3 μM (at 3σ). The DPA/Tb/G–Cu²⁺ compound was successfully applied to sense H₂S in human serum samples and exhibited a satisfactory result. It displays some desirable properties, such as fast detection procedure, high selectivity and excellent sensitivity. This method is very promising to be utilized for practical detection of H₂S in biological and environmental samples.     

A selective and sensitive fluorescent sensor for cysteine detection based on bi‐8‐carboxamidoquinoline derivative and Cu2+ complex

In this paper, a novel fluorescent sensor 1 for selective and sensitive detection of cysteine was developed based on a complex between bi‐8‐carboxamidoquinoline derivative ligand ( L ) and Cu²⁺. The interaction of Cu²⁺ with the ligand causes a dramatic fluorescence quenching most likely due to its high affinity towards Cu²⁺ and a ligand–metal charge transfer (LMCT) process. The in situ generated L–Cu ² complex was utilized as a chemosensing ensemble for cysteine. In the presence of cysteine, the fluorophore, L , was released from L–Cu ² complex because of the strong affinity of cysteine to Cu²⁺ via the Cu–S bond, leading to the fluorescence recovery of the ligand. The proposed displacement mechanism was confirmed by the results of mass spectrometry (MS) study. Under optimized conditions, the recovered fluorescence intensity is linear with cysteine concentrations in the range 1 × 10^?6 mol/l to 8 × 10^?6 mol/l. The detection limit for cysteine is 1.92 × 10^?7 mol/l. Furthermore, the established method showed a highly sensitive and selective response to cysteine among the 20 fundamental α‐amino acids used as the building blocks of proteins, after Ni²⁺ was used as a masking agent to eliminate the interference of His. The proposed sensor is applicable in monitoring cysteine in practical samples with good recovery rate.     

Multifunctional peptide‐based fluorescent chemosensor for detection of Hg2+, Cu2+ and S2− ions

A novel multifunctional fluorescent peptide sensor based on pentapeptide dansyl‐Gly‐His‐Gly‐Gly‐Trp‐COOH (D‐P5) was designed and synthesized efficiently using Fmoc solid‐phase peptide synthesis (SPPS). This fluorescent peptide sensor shows selective and sensitive responses to Hg²⁺ and Cu²⁺ among 17 metal ions and six anions studied in N‐2‐hydroxyethylpiperazine‐N‐2‐ethane sulfonic acid (HEPES) buffer solution. The peptide probe differentiates Hg²⁺ and Cu²⁺ ions by a ‘turn‐on’ response to Hg²⁺ and a ‘turn‐off’ response to Cu²⁺. Upon addition of Hg²⁺ or Cu²⁺ ions, the sensor displayed an apparent color change that was visible under an ultraviolet lamp to the naked eye. The limits of detection (LOD) of DP‐5 were 25.0 nM for Hg²⁺ and 85.0 nM for Cu²⁺; the detection limits for Cu²⁺ were much lower than the drinking water maximum contaminant levels set out by the United States Environmental Protection Agency (USEPA). It is noteworthy that both D‐P5‐Hg and D‐P5‐Cu systems were also used to detect S^2? successfully based on the formation of ternary complexes. The LODs of D‐P5‐Hg and D‐P5‐Cu systems for S^2? were 217.0 nM and 380.0 nM, respectively. Furthermore, the binding stoichiometry, binding affinity and pH sensitivity of the probe for Hg²⁺ and Cu²⁺ were investigated. This study gives new possibilities for using a short fluorescent peptide sensor for multifunctional detection, especially for anions.     

Label-free fluorescent sensor for lead ion detection based on lead(II)-stabilized G-quadruplex formation

A label-free fluorescent DNA sensor for the detection of lead ions (Pb²⁺) based on lead(II)-stabilized G-quadruplex formation is proposed in this article. A guanine (G)-rich oligonucleotide, T30695, was used as a recognition probe, and a DNA intercalator, SYBR Green I (SG), was used as a signal reporter. In the absence of Pb²⁺, the SG intercalated with the single-stranded random-coil T30695 and emitted strong fluorescence. While in the presence of Pb²⁺, the random-coil T30695 would fold into a G-quadruplex structure and the SG could barely show weak fluorescence, and the fluorescence intensity was inversely proportional to the involving amount of Pb²⁺. Based on this, a selective lead ion sensor with a limit of detection of 3.79 ppb (parts per billion) and a detection range from 0 to 600 ppb was constructed. Because detection for real samples was also demonstrated to be reliable, this simple, low-cost, sensitive, and selective sensor holds good potential for Pb²⁺ detection in real environmental samples.     

d‐penicillamine capped cadmium telluride quantum dots as a novel fluorometric sensor of copper(II)

d ‐penicillamine‐capped cadmium telluride quantum dots (DPA‐capped CdTe QDs) were synthesized as the new fluorescent semiconductor nanocrystal in aqueous solution. Fourier transmission infrared spectroscopy, X‐ray diffraction, transmission electron microscopy, ultraviolet‐visible and photoluminescence spectroscopy were used for characterization of the QDs. Based on the quenching effect of Cu²⁺ ions on the fluorescence intensity of DPA‐capped CdTe QDs, a new fluorometric sensor for copper(II) detection was developed that showed good linearity over the concentration range 5 × 10^–9–3 × 10^–6 m with the detection limit 0.4 × 10^–9 m . Owing to the strong affinity of the DPA to copper(II), the sensor showed appropriate selectivity for copper(II) compared with conventional QDs. The DPA‐capped CdTe QDs was successfully applied for determination of Cu²⁺ concentration in river, well and tap waters with satisfactory results. Copyright © 2013 John Wiley & Sons, Ltd.     

A single 8-hydroxyquinoline-appended bile acid fluorescent probe obtained by click chemistry for solvent-dependent and distinguishable sensing of zinc(II) and cadmium(II)

Construction of fluorescent probes for zinc ion (Zn²⁺) and cadmium ion (Cd²⁺) is significant for the safety of humans. However, the discriminating recognition of Zn²⁺ and Cd²⁺ by a single probe remains challenging owing to their similar properties. Herein, a novel deoxycholic acid derivative containing 8-hydroxyquinoline fluorophore has been facilely synthesized through click chemistry to form a clamp-like probe. Using its perfect bonding cavity from 1,2,3-triazole and quinoline, this molecule showed favorable solvent-dependent fluorescent responses and distinguished Zn²⁺ and Cd²⁺ in different solvents. In ethanol aqueous solution, it displayed good selectivity and ratiometric fluorescence to Zn²⁺ with 30 nm spectroscopic red-shifts. In acetonitrile aqueous solution, it exhibited good selectivity and ratiometric fluorescence to Cd²⁺ with 18 nm spectroscopic red-shifts. Moreover, the unique microstructural features of the probe in assembly were used to reflect its recognition processes. Due to its merits of low detection limit and instant response time, the probe was utilized for sensing Zn²⁺ and Cd²⁺ in water, beer and urine with high accuracy. Meanwhile, this probe served as a handy tool and was employed to obtain inexpensive test strips for the prompt and semiqualitative analysis of Zn²⁺ and Cd²⁺ with the naked eye.     

A rhodamine‐based fluorescent probe for Cu(II) determination in aqueous solution

An ‘off–on’ rhodamine‐based fluorescence probe for the selective detection of Cu(II) has been designed, exploiting the guest‐induced structure transform mechanism. This system shows a sharp Cu(II)‐selective fluorescence enhancement response in an aqueous system under physiological pH, and possesses high selectivity against a background of environmentally and biologically relevant metal ions. Under optimum conditions, the fluorescence intensity enhancement of this system is linearly proportional to the Cu(II) concentration from 50 nM to 6.0 μM with a detection limit of 29 nM. Copyright © 2014 John Wiley & Sons, Ltd.     

A switch‐off fluorescence probe towards Pb(II) and cu(II) ions based on a calix[4]pyrrole bearing amino‐quinoline group

A new fluorescence receptor calix[4]pyrrole‐N‐(quinoline‐8‐yl) acetamide (CAMQ) containing a pyrrolic ring connected via the meso‐position was synthesized, purified and characterized by elemental analysis, NMR and mass spectroscopy. This compound was examined for its fluorescence properties towards different metal ions e.g. Ag(I), Hg(II), Co(II), Ca(II), Ni(II), Zn(II), Cr(II), Ba(II), Fe(II), Cu(II), Pb(II)and Mg(II) ions by spectrophotometry and spectrofluorometry. It was concluded that the compound (CAMQ) possessed significantly enhanced selectivity for Pb(II) and Cu(II) ions in dimethyl sulfoxide (DMSO) even at very low concentrations (1 μM). It exhibit ‘turn‐on’ fluorescence when exposed to Pb(II) and Cu(II) and did so in preference to other metal ions. The binding constants, stoichiometry and quantum yields have been determined. The quenching mechanism was assessed using the Stern–Volmer equation and was also discussed.     

A highly efficient and selective turn‐on fluorescent sensor for Hg2+, Ag+ and Ag nanoparticles based on a coumarin dithioate derivative

Based on chelation‐enhanced fluorescence, a new fluorescent coumarin derivative probe 3(1‐(7‐hydroxy‐4‐methylcoumarin)ethylidene)hydrazinecarbodithioate for Hg²⁺, Ag⁺ and Ag nanoparticles is reported. Fluorescent probe acts as a rapid and highly selective “off–on” fluorescent probe and fluorescence enhancement by factors 5 to12 times was observed upon selective complexation with Hg²⁺, Ag⁺ and Ag nanoparticles. The molar ratio plots indicated the formation of 1:1 complexes between Hg²⁺ and Ag⁺ with the probe. The linear response range covers a concentration range 0.1 × 10^–5–1.9 × 10^–5 mol/L, 0.1 × 10^–5–2.3 × 10^–5 mol/L and 0.146 × 10^–12–2.63 × 10^–12 mol/L for Hg²⁺, Ag⁺ and Ag nanoparticles, respectively. The interference effect of some anions and cations was also tested. Copyright © 2013 John Wiley & Sons, Ltd.     

A novel phosphorescence sensor for Co2+ ion based on Mn‐doped ZnS quantum dots

N‐acetyl‐l ‐cysteine‐capped Mn‐doped ZnS quantum dots (QDs) were prepared by hydrothermal methods. It could emit phosphorescence at 583 nm with the excitation wavelength at 315 nm. The phosphorescence intensity of QDs could be quenched dramatically by increasing the concentration of Co²⁺ ion. The novel phosphorescence sensor based on N‐acetyl‐l ‐cysteine‐capped QDs was developed for detecting Co²⁺ ion with a linear dynamic range of 1.25 × 10^–6–3.25 × 10^–5 m . The limit of detection and RSD were 6.0 × 10^–8 m and 2.3%, respectively. Interference experiments showed excellent selectivity over numerous cations such as alkali, alkaline earth and transitional metal ions. The possible quenching mechanism was also examined by phosphorescence decays. The proposed phosphorescence method was further applied to the trace determination of Co²⁺ ion in tap and pond water samples with recoveries of 97.75–103.32%. Copyright © 2013 John Wiley & Sons, Ltd.     

A new Schiff base as a turn‐off fluorescent sensor for Cu2+ and its photophysical properties

A new Schiff base receptor 1 was synthesized and its photophysical properties were investigated by absorption, emission and excitation techniques. Furthermore, its chromogenic and fluorogenic sensing abilities towards various metal ions were examined. Receptor 1 selectively detects Cu²⁺ ion through fluorescence quenching and detection was not inhibited in the presence of other metal ions. From fluorescence titration, the limit of detection of receptor 1 as a fluorescent ‘turn‐off’ sensor for the analysis of Cu²⁺ was estimated to be 0.35 μM.     

Discriminative detection of mercury (II) and hydrazine using a dual‐function fluorescent probe

A dual‐function fluorescent probe (Probe 1 ) was developed for discriminative detection of Hg²⁺ and N₂H₄. Probe 1 could discriminatively detect Hg²⁺ and N₂H₄ through two different reaction sites, with the mechanism for Probe 1 for Hg²⁺ depending on a desulfurization reaction and for N₂H₄ depending on the Schiff‐base reaction. N₂H₄ had minimal effect on Hg²⁺ detection in dimethyl sulfoxide (DMSO)/H₂O solution, but Hg²⁺ could interfere with N₂H₄ detection in DMSO/buffer solution. Different concentrations of Hg²⁺ and N₂H₄ resulted in different blue shades of Probe 1 test strips, and the shade of blue was different with the same concentration of Hg²⁺ or N₂H₄, as observed under ultraviolet light at 365 nm wavelength.     

Chemiluminescence method for the determination of piroxicam by the enhancement of the tris‐(4,7‐diphenyl‐1,10‐phenanthrolinedisulphonic acid) ruthenium(II) (RuBPS)–cerium(IV) system and its application

A simple, rapid chemiluminescence (CL) method was described for the determination of piroxicam, a commonly used analgesic agent drug. A strong CL signal was detected when cerium(IV) sulphate was injected into tris‐(4,7‐diphenyl‐1,10‐phenanthrolinedisulphonic acid) ruthenium(II) (RuBPS)–piroxicam solution. The CL signal was proportional to the concentration of piroxicam in the range 2.8 × 10^–8–1.2 × 10^–5 mol/L. The detection limit was 2 × 10^–8 mol/L and the relative standard deviation (RSD) was 3.7% (c = 7.0 × 10^–7 mol/L piroxicam; n = 11). The proposed method was applied to the determination of piroxicam in pharmaceutical preparations in capsules, spiked serum and urine samples with satisfactory results. Copyright © 2008 John Wiley & Sons, Ltd.     

A simple and sensitive spectrofluorimetric method for the determination of furosemide using zinc(II)–1,4‐bis(imidazol‐1‐ylmethyl)benzene complexes

A novel spectrofluorometric method for the determination of furosemide (FUR) is described. The method is based on enhancement of fluorescence emission of FUR in the presence of zinc (II) complexes of 1,4‐bis(imidazol‐1‐ylmethyl)benzene. Under optimum conditions, the enhanced fluorescence intensity is linearly related to the concentration of FUR. The proposed method has been successfully applied to the determination of FUR in pharmaceutical preparations. The possible mechanism of this reaction is discussed briefly based on data from fluorescence spectroscopy, UV–vis absorption and infrared spectroscopy. Copyright © 2012 John Wiley & Sons, Ltd.     

A sensitive electrochemiluminescent sensor chip based on the ssDNA-Ru(II) complex and aptamer for the determination of thrombin

In this work, an electrochemiluminescence (ECL) sensor chip for sensitive detection of thrombin (TB) was prepared using a screen-printed electrode (SPE) as a working electrode and an aptamer as a specific recognition moiety. To produce an ECL sensor chip, a layer of pL-Cys was immobilized on the surface of the SPE using the cyclic voltammetry scanning method. A layer of gold nanoparticles (AuNPs) was assembled through an Au–S bond and hairpin DNA was further immobilized on the electrode surface. Ru(bpy)₂(mcpbpy)²⁺, as a luminescent reagent, was covalently bound to single-stranded DNA (ssDNA) to prepare a luminescence probe ssDNA-Ru. The probe was hybridized with TB aptamer to form a capture probe. In the presence of TB, the TB aptamer in the capture probe bound to TB, causing the release of ssDNA-Ru that could bind to hairpin DNA on the electrode surface. The Ru(II) complex as a luminescent reagent was assembled onto the electrode, and pL-Cys was used as a co-reactant to enhance the ECL efficiency. The ECL signal of the sensor chip generated based on the above principles had a linear relationship with log TB concentration at the range 10 fM to1 nM, and the detection limit was 0.2 fM. Finally, TB detection using this method was verified using real blood samples. This work provides a new method using an aptamer as a foundation and SPE as a material for the detection of biological substances.     

A new fluorescent chemosensor for cadmium(II) based on a pyrene‐appended piperidone derivative and its β‐cyclodextrin complex

We report, in this article, a piperidin‐4‐one derivative carrying pyrenyl fluorescent reporter groups which acts as a Cd²⁺ ion sensor. The compound is synthesized and characterized using IR and NMR spectral techniques. The compound forms an inclusion complex with β‐cyclodextrin. It selectively binds to Cd²⁺ ions in water and aqueous β‐cyclodextrin media. The stoichiometry of the host–guest complex of the compound with β‐cyclodextrin is 1:2. The ligand–metal ion binding stoichiometry is 1:1 both in water and in β‐cyclodextrin. The linear concentration range of detection of the metal ion is reported. Cyclodextrin complex formation does not affect the metal ion selectivity of the compound.