A carbonothioate‐based highly selective fluorescent probe with a large Stokes shift for detection of Hg2+

Mercury (Hg) is one of the heavy metal pollutants in the environment. Even a very small amount of mercury can cause serious harm to human beings. Herein, we reported a new carbonothioate‐based fluorescent probe for the detection of Hg²⁺ without interference from other metal ions. This probe possessed a very large Stokes shift (192 nm), which could improve the detection sensitivity by minimizing the interferences resulted from self‐absorption or auto‐fluorescence. With the addition of Hg²⁺ to the probe solution, considerable fluorescence enhancement was observed. Additionally, the Hg²⁺ concentration of 0–16 μM and fluorescence intensity showed a good linear relationship (y = 22106× + 53108, R² = 0.9955). Finally, the proposed probe was used to detect Hg²⁺ in real water samples, and its result was satisfactory. Therefore, our proposed probe would provide a promising method for the determination of Hg²⁺ in the environment.     

Phenothiazine–rhodamine‐based colorimetric and fluorogenic ‘turn‐on' sensor for Zn2+ and bioimaging studies in live cells

A phenothiazine–rhodamine (PTRH) fluorescent dyad was synthesized and its ability to selectively sense Zn²⁺ ions in solution and in in vitro cell lines was tested using various techniques. When compared with other competing metal ions, the PTRH probe showed the high selectivity for Zn²⁺ ions that was supported by electronic and emission spectral analyses. The emission band at 528 nm for the PTRH probe indicated the ring closed form of PTRH, as for Zn²⁺ ion binding to PTRH, the λ_em get shift to 608 nm was accompanied by a pale yellow to pink colour (under visible light) and green to pinkish red fluorescence emission (under UV light) due to ring opening of the spirolactam moiety in the PTRH ligand. Spectral overlap of the donor emission band and the absorption band of the ring opened form of the acceptor moiety contributed towards the fluorescence resonance energy transfer ON mechanism for Zn²⁺ ion detection. The PTRH sensor had the lowest detection limit for Zn²⁺, found to be 2.89 × 10^?8 M. The sensor also demonstrated good sensing application with minimum toxicity for in vitro analyses using HeLa cells.     

A rhodamine‐triazole fluorescent chemodosimeter for Cu2+ detection and its application in bioimaging

A rhodamine‐based fluorescent chemodosimeter rhodamine hydrazide‐triazole (RHT) tethered with a triazole moiety was developed for Cu²⁺ detection. In aqueous medium, the RHT probe exhibited high selectivity and sensitivity toward Cu²⁺ among other metal ions. The addition of Cu²⁺ triggered a fluorescence emission of RHT by 384‐fold (Φ = 0.33) based on a ring‐opening process and a subsequent hydrolysis reaction. Moreover, RHT also showed a selective colorimetric response toward Cu²⁺ from colorless solution to pink, readily observed with the naked eye. The limit of detection of RHT for Cu²⁺ was calculated to be 1 nM (0.06 ppb). RHT was successfully demonstrated to detect Cu²⁺ in Chang liver cells by confocal fluorescence microscopy.     

Hg2+‐selective ratiometric and colorimetric probe based on dansyl–rhodamine and its staining function in cell imaging

A new ratiometric probe composed of a dansyl–rhodamine dyad for the detection of Hg²⁺ via fluorescence resonance energy transfer was designed and synthesized. Rhodamine, dansyl chloride, and hydrazide were selected as the acceptor, donor, and reaction site, respectively. It displayed high selectivity and sensitivity to Hg²⁺ with obvious colour change and fluorescence change due to Hg²⁺‐assisted hydrolysis of rhodamine hydrazide. A good linear relationship ranging from 0 to 16 μM and 0–28 μM for the Hg²⁺ concentration was found based on absorbance and fluorescence assay, respectively. Detection limits of absorbance and fluorescence for Hg²⁺ were calculated to be 1.22 μM and 9.10 μM, respectively.     

‘Turn‐on’ fluorescent chemosensors based on naphthaldehyde‐2‐pyridinehydrazone compounds for the detection of zinc ion in water at neutral pH

A series of naphthaldehyde‐2‐pyridinehydrazone derivatives were discovered to display interesting ‘turn‐on’ fluorescence response to Zn²⁺ in 99% water/DMSO (v/v) at pH 7.0. Mechanism study indicated that different substituent groups in the naphthaldehyde moiety exhibited significant influence on the detection of Zn²⁺. The electron rich group resulted in longer fluorescence wavelengths but smaller fluorescence enhancement for Zn²⁺. Among these compounds, 1 showed the highest fluorescence enhancement of 19‐fold with the lowest detection limit of 0.17 μmol/L toward Zn²⁺. The corresponding linear range was at least from 0.6 to 6.0 μmol/L. Significantly, 1 showed an excellent selectivity toward Zn²⁺ over other metal ions including Cd²⁺.     

Two‐channel near‐infrared fluorescence Ag+ ion sensing of a new star‐shaped dendrimer

A new near‐infrared fluorescence sensor PDI‐PD for Ag⁺ ions was successfully prepared and its structure characterized by ¹H nuclear magnetic resonance (NMR), ¹³C NMR and high‐resolution mass spectrometry; matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (HRMS MALDI‐TOF). The probe exhibited rapid, sensitive, and selective two‐channel fluorescence responses towards Ag⁺ ions and protons. The probe has a marked high binding affinity and high sensitivity for Ag⁺, with a detection limit of 1.4 × 10^?6 M. An approximately five‐fold enhanced core emission at 784 nm was attributed to fluorescence resonance energy transfer (FRET). The enhanced core emission of the probe with Ag⁺ ions based on photo‐induced electron transfer and FRET is discussed. In addition, the probe presented a visible colour change. All experimental results demonstrated that PDI‐PD is an efficient tool for the selective, sensitive and rapid detection of Ag⁺ ions and protons using two‐channel fluorescence responses.     

A colorimetric fluorescent probe for rapid and specific detection of nitrite

The method of fluorescent probes has been an important technique for detection of nitrite (NO₂^?). As an important inorganic salt, excessive nitrite would threaten humans and the environment. In this paper, a colorimetric fluorescent probe P‐N (1,2‐diaminoanthraquinone) with rapid response and high selectivity, which could detect NO₂^? by visual colour changes and fluorescence spectroscopy is presented. The probe P‐N solution (pH 1) changed from pink to colourless with the addition of NO₂^? and fluorescence intensity at 639 nm clearly decreased. Good linear exists between fluorescence intensities and NO₂^? concentrations for the range 0–16 μM, and the detection limit was 54 nM (based on a 3σ/slope). Moreover, probe P‐N could also detect NO₂^? in real water samples, and results were all satisfactory. Probe P‐N shows great practical application value for detecting NO₂^? in the environment.     

Highly selective and sensitive ‘on–off’ fluorescent chemosensor for Fe3+ ions crafted by benzofuran moiety in both experimental and theoretical methods

A benzofuran glycinamide-based chemosensor, 3-(2-([4-fluorobenzyl]amino)acetamido)benzofuran-2-carboxamide ( BGA ) was developed and synthesized for the selective and sensitive detection of Fe³⁺ ions. The photophysical properties of the probe BGA were studied using UV–visible light absorption and fluorescence spectrophotometers. The chemosensor BGA showed a marked ‘on–off’ fluorescence response towards Fe³⁺ ions in the presence of other metal ions in DMSO/H₂O solution (9/1, v/v). The very low limits of detection (LOD) were calculated to be 10 nM and 43 nM using UV–visible light absorption and fluorescence spectrophotometers, respectively. Job's plot analysis revealed the formation of a BGA -Fe³⁺ complex with a 1:1 binding stoichiometry ratio using UV–visible light spectroscopy. The sensing mechanism was also demonstrated using density functional theory calculation.     

A new benzimidazole‐based selective and sensitive ‘on–off’ fluorescence chemosensor for Cu2+ ions and application in cellular bioimaging

Two new twinborn benzimidazole derivates ( L and A ), which bonded pyridine via the ester space on the opposite and adjacent positions of the benzene ring of benzimidazole respectively, were designed and synthesized. Compound L displayed fluorescence quenching response only towards copper(II) ions (Cu²⁺) in acetonitrile solution with high selectivity and sensitivity. However, compound A presented ‘on–off’ fluorescence response towards a wide range of metal ions to different degrees and did not have selectivity. Furthermore, compound L formed a 1:1 complex with Cu²⁺ and the binding constant between sensor L and Cu²⁺ was high at 6.02 × 10⁴ M^?1. Job's plot, mass spectra, IR spectra, ¹H‐NMR titration and density functional theory (DFT) calculations demonstrated the formation of a 1:1 complex between L and Cu²⁺. Chemosensor L displayed a low limit of detection (3.05 × 10^?6 M) and fast response time (15 s) to Cu²⁺. The Stern–Volmer analysis illustrated that the fluorescence quenching agreed with the static quenching mode. In addition, the obvious difference of L within HepG2 cells in the presence and absence of Cu²⁺ indicated L had the recognition capability for Cu²⁺ in living cells.     

Characterization of a highly Al3+‐selective fluorescence probe based on naphthalimide‐Schiff base and its application to practical water samples

A new fluorescent Al³⁺‐probe, N‐allyl‐4‐[3,3′‐((2‐aminoethyl)azanediyl)‐bis(N´‐(2‐hydroxybenzylidene)propanehy‐drazide)]‐1,8‐naphthalimide ( L ), was designed and synthesized based on 1,8‐naphthalimide. The probe L contains 1,8‐naphthalimide moiety as the fluorophore and a Schiff base as the recognition group. The structure of L was determined by single crystal X‐ray. L emission at 526 nm increased on addition of Al³⁺ under excitation wavelength at 350 nm. L exhibited high selectivity and sensitivity fluorescence emission towards to Al³⁺ in ethanol/Tris–HCl buffer solution (1:1, v/v, pH = 7.2) as compared with other tested metal ions. A good linearity with a correlation coefficient (R²) of 0.99 was observed in the concentration range 2–10 μM. The binding constant and the detection limit of L for Al³⁺ were calculated to 2.6 × 10⁴ M^?1 and 0.34 μM, respectively. The results of experiments that including Job plot, ultraviolet–visible (UV–Vis) light titration, fluorescence titration, ESI‐MS and ¹H NMR titration, indicated a 1:1 stoichiometric complex between L and Al³⁺. L was highly effective in monitoring Al³⁺ in real‐life Yellow River and tap water samples.     

A highly selective colorimetric and long‐wavelength fluorescent probe for the detection of Hg2+

Currently, the fluorescent probe is an important method for detecting heavy metal ions, especially mercury ion (Hg²⁺), which is harmful to the health of humans and the environment due to its toxicity and extensive use. In this paper, we designed and synthesized a colorimetric and long‐wavelength fluorescent probe Hg‐P with high sensitivity and excellent selectivity, which could detect Hg²⁺ by the changes of visual color, fluorescence and absorption spectroscopy. With the addition of Hg²⁺ to probe Hg‐P solution, its color changed from yellow to pink, and showed a 171 nm red‐shifted absorption spectrum. Probe Hg‐P was used in real water and soil solution samples to detect Hg²⁺, and the result is satisfactory. Therefore, this new probe shows great value and application in detecting Hg²⁺ in the environment.     

A new rhodamine‐based fluorescent chemodosimeter for mercuric ions in water media

A new rhodamine–ethylenediamine–nitrothiourea conjugate (RT) was synthesized and its sensing property as a fluorescent chemodosimeter toward metal ions was explored in water media. Analytical results from absorption and fluorescence spectra revealed that the addition of Hg²⁺ ions to the aqueous solution of the chemodosimeter RT caused a distinct fluorescence OFF–ON response with a remarkable visual color change from colorless to pink; however, no clear spectral and color changes were observed from other metal ions including: Zn²⁺, Cu²⁺, Cd²⁺, Pb²⁺, Ag⁺, Fe²⁺, Cr³⁺, Co³⁺, Ni²⁺, Ca²⁺, Mg²⁺, K⁺ and Na⁺. The sensing results and the molecular structure suggested that a Hg²⁺‐induced a desulfurization reaction and cyclic guanylation of the thiourea moiety followed by ring‐opening of the rhodamine spirolactam in RT are responsible for a distinct fluorescence turn‐on signal, indicating that RT is a remarkably sensitive and selective chemodosimeter for Hg²⁺ ions in aqueous solution. Hg²⁺ within a concentration range from 0.1 to 25 μM can be determined using RT as a chemodosimeter and a detection limit of 0.04 μM is achieved. Copyright © 2014 John Wiley & Sons, Ltd.     

Colorimetric chiral fluorescent sensors for Eu3+ and sequential enantioselective sensing of malate anion

Novel phenanthroline Schiff base fluorescent sensors L1 , L2 , and D1 were designed and synthesized. The sensing abilities of the compounds in the presence of metal cations (Li⁺, Na⁺, K⁺, Ag⁺, Mg²⁺, Ba²⁺, Ca²⁺, Mn²⁺, Pb²⁺, Hg²⁺, Ni²⁺, Zn²⁺, Cd²⁺, Co²⁺, Cu²⁺, Cr³⁺, Fe³⁺, Fe²⁺, Al³⁺, and Eu³⁺) were studied by UV‐vis and fluorescent spectroscopy. The compounds L1 , L2 , and D1 could act as Eu³⁺ ion turn‐off fluorescent sensors based on ligand‐to‐metal binding mechanism in DMSO‐H₂O solution (v/v = 1:1, 10 mM Tris, pH = 7.4). Additionally, the L1 –Eu³⁺ and D1 –Eu³⁺ complexes could be applied as turn‐on enantioselective sensors sensing of malate anion isomers with color changes. Furthermore, biological experiments using living PC‐12 cells demonstrated that L1 and D1 had excellent membrane permeability and could be used as effective fluorescent sensors for detecting Eu³⁺ and malate anion in living cells.     

Rapid and visual detection for hypochlorite of an AIE enhanced fluorescence probe

In this paper, a new ‘turn‐on' fluorescence probe for the rapid, sensitive, and visual detection of hypochlorite is reported. The push–pull type trianiline–tricyanofuran‐based fluorescent probe was prepared using a condensation reaction between tricyanofuran and the thiophene–trianiline derivative that had high quantum yields and showed aggregation‐induced emission enhanced properties. Upon exposure to hypochlorite, prominent fluorescence enhancement of the probe was observed via the release of the fluorophore from the probe. The probe showed a ratiometric absorption change at 315 nm and 575 nm. Importantly, the probe showed an excellent detection limit for hypochlorite at 1.2 × 10^?7 M in solution and it was successfully applied for monitoring hypochlorite in waste water by test strip. This work reports a new fluorescence analytical sensing method for hypochlorite that has potential practical value in environmental monitoring and biological discrimination.     

CAX1 suppresses Cd‐induced generation of reactive oxygen species in Arabidopsis halleri

The molecular analysis of metal hyperaccumulation in species such as Arabidopsis halleri offers the chance to gain insights into metal homeostasis and into the evolution of adaptation to extreme habitats. A prerequisite of metal hyperaccumulation is metal hypertolerance. Genetic analysis of a backcross population derived from Arabidopsis lyrata × A. halleri crosses revealed three quantitative trait loci for Cd hypertolerance. A candidate gene for Cdtol2 is AhCAX1, encoding a vacuolar Ca²⁺/H⁺ antiporter. We developed a method for the transformation of vegetatively propagated A. halleri plants and generated AhCAX1‐silenced lines. Upon Cd²⁺ exposure, several‐fold higher accumulation of reactive oxygen species (ROS) was detectable in roots of AhCAX1‐silenced plants. In accordance with the dependence of Cdtol2 on external Ca²⁺ concentration, this phenotype was exclusively observed in low Ca²⁺ conditions. The effects of external Ca²⁺ on Cd accumulation cannot explain the phenotype as they were not influenced by the genotype. Our data strongly support the hypothesis that higher expression of CAX1 in A. halleri relative to other Arabidopsis species represents a Cd hypertolerance factor. We propose a function of AhCAX1 in preventing a positive feedback loop of Cd‐elicited ROS production triggering further Ca²⁺‐dependent ROS accumulation.     

A highly selective and sensitive turn‐on fluorescent probe for the detection of Al3+ and its bioimaging

A novel fluorescent sensor, 1‐((2‐hydroxynaphthalen‐1‐yl)methylene)urea (ocn) has been designed and applied as a highly selective and sensitive fluorescent probe for recognition of Al³⁺ in Tris–HCl (pH = 7.20) solution. The probe ocn exhibits an excellent selectivity to Al³⁺ over other examined metal ions, anions and amino acids with a prominent fluorescence ‘turn‐on’ at 438 nm. ocn binds to Al³⁺ with a 2:1 binding stoichiometry and the detection limit was 0.3 μM. Furthermore, its capability of biological application was evaluated and the results showed that the sensor could be used to detect Al³⁺ in living cells.     

Three colorimetric and off–on fluorescent chemosensors for Fe3+ in aqueous media

Three Rhodamine B derivatives were synthesized and characterized by ESI‐MS, NMR, HR‐MS and IR. The probes exhibit high selectivity and sensitivity towards Fe³⁺ over other metal ions in CH₃CN–water. Upon the addition of Fe³⁺, the spirocyclic ring of the probe was opened and a significant enhancement of visible color and fluorescence within the range of 540–700 nm was observed. The colorimetric and fluorescent response to Fe³⁺ can be conveniently detected even by the naked eye, which provides a facile method for the visual detection of Fe³⁺. Job's plot, fluorescence titration and MS indicated the formation of 1:2 complexes between the probes and Fe³⁺. The reversibility of the reaction establishes the potential of these probes as chemosensors for Fe³⁺ detection. Copyright © 2013 John Wiley & Sons, Ltd.     

Multifunctional peptide‐based fluorescent chemosensor for detection of Hg2+, Cu2+ and S2− ions

A novel multifunctional fluorescent peptide sensor based on pentapeptide dansyl‐Gly‐His‐Gly‐Gly‐Trp‐COOH (D‐P5) was designed and synthesized efficiently using Fmoc solid‐phase peptide synthesis (SPPS). This fluorescent peptide sensor shows selective and sensitive responses to Hg²⁺ and Cu²⁺ among 17 metal ions and six anions studied in N‐2‐hydroxyethylpiperazine‐N‐2‐ethane sulfonic acid (HEPES) buffer solution. The peptide probe differentiates Hg²⁺ and Cu²⁺ ions by a ‘turn‐on’ response to Hg²⁺ and a ‘turn‐off’ response to Cu²⁺. Upon addition of Hg²⁺ or Cu²⁺ ions, the sensor displayed an apparent color change that was visible under an ultraviolet lamp to the naked eye. The limits of detection (LOD) of DP‐5 were 25.0 nM for Hg²⁺ and 85.0 nM for Cu²⁺; the detection limits for Cu²⁺ were much lower than the drinking water maximum contaminant levels set out by the United States Environmental Protection Agency (USEPA). It is noteworthy that both D‐P5‐Hg and D‐P5‐Cu systems were also used to detect S^2? successfully based on the formation of ternary complexes. The LODs of D‐P5‐Hg and D‐P5‐Cu systems for S^2? were 217.0 nM and 380.0 nM, respectively. Furthermore, the binding stoichiometry, binding affinity and pH sensitivity of the probe for Hg²⁺ and Cu²⁺ were investigated. This study gives new possibilities for using a short fluorescent peptide sensor for multifunctional detection, especially for anions.     

Measuring mitochondrial and cytoplasmic Ca2+ in EGFP expressing cells with a low-affinity Calcium Ruby and its dextran conjugate

The limited choice and poor performance of red-emitting calcium (Ca²⁺) indicators have hampered microfluorometric measurements of the intracellular free Ca²⁺ concentration in cells expressing yellow- or green-fluorescent protein constructs. A long-wavelength Ca²⁺ indicator would also permit a better discrimination against cellular autofluorescence than the commonly used fluorescein-based probes. Here, we report an improved synthesis and characterization of Calcium Ruby, a red-emitting probe consisting of an extended rhodamine chromophore (578/602 nm peak excitation/emission) conjugated to BAPTA and having an additional NH₂ linker arm. The low-affinity variant (K_D,Ca ～30 μM) with a chloride in meta position that was specifically designed for the detection of large and rapid Ca²⁺ transients. While Calcium Ruby is a mitochondrial Ca²⁺probe, its conjugation, via the NH₂ tail, to a 10,000 MW dextran abolishes the sub-cellular compartmentalization and generates a cytosolic Ca²⁺ probe with an affinity matched to microdomain Ca²⁺ signals. As an example, we show depolarization-evoked Ca²⁺ signals triggering the exocytosis of individual chromaffin granules. Calcium Ruby should be of use in a wide range of applications involving dual- or triple labeling schemes or targeted sub-cellular Ca²⁺ measurements.     

A novel optical probe based on d‐penicillamine‐functionalized graphene quantum dots: Preparation and application as signal amplification element to minoring of ions in human biofluid

In this study, d ‐penicillamine‐functionalized graphene quantum dots (DPA‐GQD) has been synthesized, which significantly increases the fluorescence intensity of GQD. We used this simple fluorescent probe for metal ions detection in human plasma samples. Designed DPA‐GQD respond to Hg²⁺, Cu²⁺, Au²⁺, Ag⁺, Co²⁺, Zn²⁺, and Pb²⁺ with high sensitivity. The fluorescence intensity of this probe decreased significantly in the presence of metal ions such as, Hg²⁺, Cu²⁺, Au²⁺, Ag⁺, Co²⁺, Zn²⁺, and Pb²⁺. In this work, a promising probe for ions monitoring was introduced. Moreover, DPA‐GQD probe has been tested in plasma samples. The functionalized DPA‐GQDs exhibits great promise as an alternative to previous fluorescent probes for bio‐labeling, sensing, and other biomedical applications in aqueous solution.