Estimating the Greenhouse Gas Balance of Individual Gas‐Fired and Oil‐Fired Electricity Plants on a Global Scale

Life cycle greenhouse gas (LC‐GHG) emissions from electricity generated by a specific resource, such as gas and oil, are commonly reported on a country‐by‐country basis. Estimation of variability in LC‐GHG emissions of individual power plants can, however, be particularly useful to evaluate or identify appropriate environmental policy measures. Here, we developed a regression model to predict LC‐GHG emissions per kilowatt‐hour (kWh) of electricity produced by individual gas‐ and oil‐fired power plants across the world. The regression model uses power plant characteristics as predictors, including capacity, age, fuel type (fuel oil or natural gas), and technology type (single or combined cycle) of the plant. The predictive power of the model was relatively high (R² = 81% for predictions). Fuel and technology type were identified as the most important predictors. Estimated emission factors ranged from 0.45 to 1.16 kilograms carbon dioxide equivalents per kilowatt‐hour (kg CO₂‐eq/kWh) and were clearly different between natural gas combined cycle (0.45 to 0.57 kg CO₂‐eq/kWh), natural gas single cycle (0.66 to 0.85 kg CO₂‐eq/kWh), oil combined cycle power plants (0.63 to 0.79 kg CO₂‐eq/kWh), and oil single cycle (0.94 to 1.16 kg CO₂‐eq/kWh). Our results thus indicate that emission data averaged by fuel and technology type can be profitably used to estimate the emissions of individual plants.     

Site‐specific life cycle assessment of a pilot floating offshore wind farm based on suppliers’ data and geo‐located wind data

Renewable energy systems are essential in coming years to ensure an efficient energy supply while maintaining environmental protection. Despite having low environmental impacts during operation, other phases of the life cycle need to be accounted for. This study presents a geo‐located life cycle assessment of an emerging technology, namely, floating offshore wind farms. It is developed and applied to a pilot project in the Mediterranean Sea. The materials inventory is based on real data from suppliers and coupled to a parameterized model which exploits a geographic information system wind database to estimate electricity production. This multi‐criteria assessment identified the extraction and transformation of materials as the main contributor to environmental impacts such as climate change (70% of the total 22.3 g CO₂ eq/kWh), water use (73% of 6.7 L/kWh), and air quality (76% of 25.2 mg PM2.5/kWh), mainly because of the floater's manufacture. The results corroborate the low environmental impact of this emerging technology compared to other energy sources. The electricity production estimates, based on geo‐located wind data, were found to be a critical component of the model that affects environmental performance. Sensitivity analyses highlighted the importance of the project's lifetime, which was the main parameter responsible for variations in the analyzed categories. Background uncertainties should be analyzed but may be reduced by focusing data collection on significant contributors. Geo‐located modeling proved to be an effective technique to account for geographical variability of renewable energy technologies and contribute to decision‐making processes leading to their development.     

Life Cycle–based Assessment of Energy Use and Greenhouse Gas Emissions in Almond Production,Part I: Analytical Framework and Baseline Results

This first article of a two‐article series describes a framework and life cycle–based model for typical almond orchard production systems for California, where more than 80% of commercial almonds on the world market are produced. The comprehensive, multiyear, life cycle–based model includes orchard establishment and removal; field operations and inputs; emissions from orchard soils; and transport and utilization of co‐products. These processes are analyzed to yield a life cycle inventory of energy use, greenhouse gas (GHG) emissions, criteria air pollutants, and direct water use from field to factory gate. Results show that 1 kilogram (kg) of raw almonds and associated co‐products of hulls, shells, and woody biomass require 35 megajoules (MJ) of energy and result in 1.6 kg carbon dioxide equivalent (CO₂‐eq) of GHG emissions. Nitrogen fertilizer and irrigation water are the dominant causes of both energy use and GHG emissions. Co‐product credits play an important role in estimating the life cycle environmental impacts attributable to almonds alone; using displacement methods results in net energy and emissions of 29 MJ and 0.9 kg CO₂‐eq/kg. The largest sources of credits are from orchard biomass and shells used in electricity generation, which are modeled as displacing average California electricity. Using economic allocation methods produces significantly different results; 1 kg of almonds is responsible for 33 MJ of energy and 1.5 kg CO₂‐eq emissions. Uncertainty analysis of important parameters and assumptions, as well as temporary carbon storage in orchard trees and soils, are explored in the second article of this two‐part article series.     

Life cycle assessment of recirculating aquaculture systems: A case of Atlantic salmon farming in China

Recirculating aquaculture systems (RAS) are an alternative technology to tackle the major environmental challenges associated with conventional cage culture systems. In order to systematically assess the environmental performance of RAS farming, it is important to take the whole life cycle into account so as to avoid ad hoc and suboptimal environmental measures. So far, the application of life cycle assessment (LCA) in aquaculture, especially to indoor RAS, is still in progress. This study reports on an LCA of Atlantic salmon harvested at an indoor RAS farm in northern China. Results showed that 1 tonne live‐weight salmon production required 7,509 kWh farm‐level electricity and generated 16.7 tonnes of CO₂ equivalent (eq), 106 kg of SO₂ eq, 2.4 kg of P eq, and 108 kg of N eq (cradle‐to‐farm gate). In particular, farm‐level electricity use and feed product were identified as primary contributors to eight of nine impact categories assessed (54–95% in total), except the potential marine eutrophication (MEU) impact (dominated by the grow‐out effluents). Among feed ingredients (on a dry‐weight basis), chicken meal (5%) and krill meal (8%) dominated six and three, respectively, of the nine impact categories. Suggested environmental improvement measures for this indoor RAS farm included optimization of stocking density, feeding management, grow‐out effluent treatment, substitution of feed ingredients, and selection of electricity generation sources. In a generic context, this study can contribute to a better understanding of the life cycle environmental impacts of land‐based salmon RAS operations, as well as science‐based communication among stakeholders on more eco‐friendly farmed salmon.     

Environmental Damage Assessment of Carbon Capture and Storage

An end‐point life cycle impact assessment is used to evaluate the damages of electricity generation from fossil fuel‐based power plants with carbon dioxide capture and storage (CCS) technology. Pulverized coal (PC), integrated gasification combined cycle (IGCC), and natural gas combined cycle (NGCC) power plants are assessed for carbon dioxide (CO₂) capture, pipeline transport, and storage in a geological formation. Results show that the CCS systems reduce the climate change‐related damages but increase the damages from toxicity, acidification, eutrophication, and resource consumption. Based on the currently available damage calculation methods, it is concluded that the benefit of reducing damage from climate change is larger than the increases in other damage categories, such as health effects from particulates or toxic chemicals. CCS significantly reduces the overall environmental damage, with a net reduction of 60% to 70% in human health damage and 65% to 75% in ecosystem damage. Most of the damage is due to fuel production and combustion processes. The energy and infrastructure demands of CCS cause increases in the depletion of natural resources by 33% for PC, 19% for IGCC, and 18% for NGCC power plants, mostly due to increased fossil fuel consumption.     

Variability in greenhouse gas footprints of the global wind farm fleet

While technological characteristics largely determine the greenhouse gas (GHG) emissions during the construction of a wind farm and meteorological circumstances the actual electricity production, a thorough analysis to quantify the GHG footprint variability (in g CO₂eq/kWh electricity produced) between wind farms is still lacking at the global scale. Here, we quantified the GHG footprint of 26,821 wind farms located across the globe, combining turbine-specific technological parameters, life-cycle inventory data, and location- and temporal-specific meteorological information. These wind farms represent 79% of the 651 global wind (GW) capacity installed in 2019. Our results indicate a median GHG footprint for global wind electricity of 10 g CO₂eq/kWh, ranging from 4 to 56 g CO₂eq/kWh (2.5th and 97.5th percentiles). Differences in the GHG footprint of wind farms are mainly explained by spatial variability in wind speed, followed by whether the wind farm is located onshore or offshore, the turbine diameter, and the number of turbines in a wind farm. We also provided a metamodel based on these four predictors for users to be able to easily obtain a first indication of GHG footprints of new wind farms considered. Our results can be used to compare the GHG footprint of wind farms to one another and to other sources of electricity in a location-specific manner.     

Life Cycle–based Assessment of Energy Use and Greenhouse Gas Emissions in Almond Production,Part II: Uncertainty Analysis through Sensitivity Analysis and Scenario Testing

This is the second part of a two‐article series examining California almond production. The part I article describes development of the analytical framework and life cycle–based model and presents typical energy use and greenhouse gas (GHG) emissions for California almonds. This part II article builds on this by exploring uncertainty in the life cycle model through sensitivity and scenario analysis, and by examining temporary carbon storage in the orchard. Sensitivity analysis shows life cycle GHG emissions are most affected by biomass fate and utilization, followed by nitrous oxide emissions rates from orchard soils. Model sensitivity for net energy consumption is highest for irrigation system parameters, followed by biomass fate and utilization. Scenario analysis shows utilization of orchard biomass for electricity production has the greatest potential effect, assuming displacement methods are used for co‐product allocation. Results of the scenario analysis show that 1 kilogram (kg) of almond kernel and associated co‐products are estimated to cause between ?3.12 to 2.67 kg carbon dioxide equivalent (CO₂‐eq) emissions and consume between 27.6 to 52.5 megajoules (MJ) of energy. Co‐product displacement credits lead to avoided emissions of between ?1.33 to 2.45 kg CO₂‐eq and between ?0.08 to 13.7 MJ of avoided energy use, leading to net results of ?1.39 to 3.99 kg CO₂‐eq and 15.3 to 52.6 MJ per kg kernel (net results are calculated by subtracting co‐product credits from the results for almonds and co‐products). Temporary carbon storage in orchard biomass and soils is accounted for by using alternative global warming characterization factors and leads to a 14% to 18% reduction in CO₂‐eq emissions. Future studies of orchards and other perennial cropping systems should likely consider temporary carbon storage.     

A Miscanthus plantation can be carbon neutral without increasing soil carbon stocks

National governments and international organizations perceive bioenergy, from crops such as Miscanthus, to have an important role in mitigating greenhouse gas (GHG) emissions and combating climate change. In this research, we address three objectives aimed at reducing uncertainty regarding the climate change mitigation potential of commercial Miscanthus plantations in the United Kingdom: (i) to examine soil temperature and moisture as potential drivers of soil GHG emissions through four years of parallel measurements, (ii) to quantify carbon (C) dynamics associated with soil sequestration using regular measurements of topsoil (0–30 cm) C and the surface litter layer and (iii) to calculate a life cycle GHG budget using site‐specific measurements, enabling the GHG intensity of Miscanthus used for electricity generation to be compared against coal and natural gas. Our results show that methane (CH₄) and nitrous oxide (N₂O) emissions contributed little to the overall GHG budget of Miscanthus, while soil respiration offset 30% of the crop's net aboveground C uptake. Temperature sensitivity of soil respiration was highest during crop growth and lowest during winter months. We observed no significant change in topsoil C or nitrogen stocks following 7 years of Miscanthus cultivation. The depth of litter did, however, increase significantly, stabilizing at approximately 7 tonnes dry biomass per hectare after 6 years. The cradle‐to‐farm gate GHG budget of this crop indicated a net removal of 24.5 t CO₂‐eq ha^?1 yr^?1 from the atmosphere despite no detectable C sequestration in soils. When scaled up to consider the full life cycle, Miscanthus fared very well in comparison with coal and natural gas, suggesting considerable CO₂ offsetting per kWh generated. Although the comparison does not account for the land area requirements of the energy generated, Miscanthus used for electricity generation can make a significant contribution to climate change mitigation even when combusted in conventional steam turbine power plants.     

Hybrid Input‐Output Life Cycle Assessment of First‐ and Second‐Generation Ethanol Production Technologies in Brazil

A hybrid approach combining life cycle assessment and input‐output analysis was used to demonstrate the economic and environmental benefits of current and future improvements in agricultural and industrial technologies for ethanol production in Brazilian biorefineries. In this article, three main scenarios were evaluated: first‐generation ethanol production with the average current technology; the improved current technology; and the integration of improved first‐ and second‐generation ethanol production. For the improved first‐generation scenario, a US$1 million increase in ethanol demand can give rise to US$2.5 million of total economic activity in the Brazilian economy when direct and indirect purchases of inputs are considered. This value is slightly higher than the economic activity (US$1.8 million) for an energy equivalent amount of gasoline. The integration of first‐ and second‐generation technologies significantly reduces the total greenhouse gas emissions of ethanol production: 14.6 versus 86.4 grams of carbon dioxide equivalent per megajoule (g CO₂‐eq/MJ) for gasoline. Moreover, emissions of ethanol can be negative (–10.5 g CO₂‐eq/MJ) when the system boundary is expanded to account for surplus bioelectricity by displacement of natural gas thermal electricity generation considering electricity produced in first‐generation optimized biorefineries.     

中国省级火电供应生命周期清单分析

应用生命周期评价方法,建立了我国各省区的火电供应生命周期清单。清单分析结果表明,我国各省区单位火电供应的生命周期清单之间,及与全国单位火电供应的生命周期清单之间均存在一定差异,以总能源投入和全球变暖潜值为例进行了分析。在全球变暖潜值方面,我国单位火电供应的平均值为1.05kg/k Wh。云南等15个省区的单位火电全球变暖潜值与全国平均水平相差±10%以上。如果基于全国单位火电供应的平均全球变暖潜值计算各省火电总量全球变暖潜值,与基于各省单位火电全球变暖潜值计算的结果相比,也存在一定的差距。15个省区与基于全国平均值计算的结果相差±10%以上,表明了核算各省区火电清单的必要性。中国省级火电供应生命周期清单为省区级别的材料、产品、产业等生命周期评价提供数据支撑,也为各省区电力节能减排提供了理论基础。     

Life Cycle Greenhouse Gas Emissions Reduction From Rigid Thermal Insulation Use in Buildings

Thermal insulation is a strategic product for reducing energy consumption and related greenhouse gas (GHG) emissions from the building sector. This study examines from a life cycle perspective the changes in GHG emissions resulting from the use of two rigid thermal insulation products manufactured and installed from 1971 to 2025. GHG emissions related to insulation production and fugitive releases of blowing agents are modeled and compared with GHG savings from reduced heating loads in North America, Europe, and Asia. Implementation of alternative blowing agents has greatly improved the carbon dioxide 100‐year equivalent (CO₂‐eq) emission performance of thermal insulation. The net average CO₂‐eq savings to emissions ratio for current extruded polystyrene (XPS) and polyisocyanurate (PIR) insulation studied was 48:1, with a broad range from 3 to 1,800. Older insulation products manufactured with chlorofluorocarbons (CFCs) can result in net cumulative GHG emissions. Reduction of CO₂‐eq emissions from buildings is governed by complex interactions between insulation thickness and placement, climate, fuel type, and heating system efficiencies. A series of charts mapping both emissions payback and net savings demonstrate the interactions between these factors and provide a basis for specific policy recommendations to guide effective insulation investments and placement.     

Life Cycle Assessment of Biomass‐based Combined Heat and Power Plants

Norway, like many countries, has realized the need to extensively plan its renewable energy future sooner rather than later. Combined heat and power (CHP) through gasification of forest residues is one technology that is expected to aid Norway in achieving a desired doubling of bioenergy production by 2020. To assess the environmental impacts to determine the most suitable CHP size, we performed a unit process‐based attributional life cycle assessment (LCA), in which we compared three scales of CHP over ten environmental impact categories—micro (0.1 megawatts electricity [MWe]), small (1 MWe), and medium (50 MWe) scale. The functional units used were 1 megajoule (MJ) of electricity and 1 MJ of district heating delivered to the end user (two functional units), and therefore, the environmental impacts from distribution of electricity and hot water to the consumer were also considered. This study focuses on a regional perspective situated in middle‐Norway's Nord‐ and Sør‐Trøndelag counties. Overall, the unit‐based environmental impacts between the scales of CHP were quite mixed and within the same magnitude. The results indicated that energy distribution from CHP plant to end user creates from less than 1% to nearly 90% of the total system impacts, depending on impact category and energy product. Also, an optimal small‐scale CHP plant may be the best environmental option. The CHP systems had a global warming potential ranging from 2.4 to 2.8 grams of carbon dioxide equivalent per megajoule of thermal (g CO₂‐eq/MJ_th) district heating and from 8.8 to 10.5 grams carbon dioxide equivalent per megajoule of electricity (g CO₂‐eq/MJ_el) to the end user.     

Influence of spatially dependent,modeled soil carbon emission factors on life‐cycle greenhouse gas emissions of corn and cellulosic ethanol

Converting land to biofuel feedstock production incurs changes in soil organic carbon (SOC) that can influence biofuel life‐cycle greenhouse gas (GHG) emissions. Estimates of these land use change (LUC) and life‐cycle GHG emissions affect biofuels' attractiveness and eligibility under a number of renewable fuel policies in the USA and abroad. Modeling was used to refine the spatial resolution and depth extent of domestic estimates of SOC change for land (cropland, cropland pasture, grassland, and forest) conversion scenarios to biofuel crops (corn, corn stover, switchgrass, Miscanthus, poplar, and willow) at the county level in the USA. Results show that in most regions, conversions from cropland and cropland pasture to biofuel crops led to neutral or small levels of SOC sequestration, while conversion of grassland and forest generally caused net SOC loss. SOC change results were incorporated into the Greenhouse Gases, Regulated Emissions, and Energy use in Transportation (GREET) model to assess their influence on life‐cycle GHG emissions of corn and cellulosic ethanol. Total LUC GHG emissions (g CO₂eq MJ^?1) were 2.1–9.3 for corn‐, ?0.7 for corn stover‐, ?3.4 to 12.9 for switchgrass‐, and ?20.1 to ?6.2 for Miscanthus ethanol; these varied with SOC modeling assumptions applied. Extending the soil depth from 30 to 100 cm affected spatially explicit SOC change and overall LUC GHG emissions; however, the influence on LUC GHG emission estimates was less significant in corn and corn stover than cellulosic feedstocks. Total life‐cycle GHG emissions (g CO₂eq MJ^?1, 100 cm) were estimated to be 59–66 for corn ethanol, 14 for stover ethanol, 18–26 for switchgrass ethanol, and ?7 to ?0.6 for Miscanthus ethanol. The LUC GHG emissions associated with poplar‐ and willow‐derived ethanol may be higher than that for switchgrass ethanol due to lower biomass yield.     

A methodology for separating uncertainty and variability in the life cycle greenhouse gas emissions of coal-fueled power generation in the USA

Purpose

Results of life cycle assessments (LCAs) of power generation technologies are increasingly reported in terms of typical values and possible ranges. Extents of these ranges result from both variability and uncertainty. Uncertainty may be reduced via additional research. However, variability is a characteristic of supply chains as they exist; as such, it cannot be reduced without modifying existing systems. The goal of this study is to separately quantify uncertainty and variability in LCA.

Methods

In this paper, we present a novel method for differentiating uncertainty from variability in life cycle assessments of coal-fueled power generation, with a specific focus on greenhouse gas emissions. Individual coal supply chains were analyzed for 364 US coal power plants. Uncertainty in CO₂ and CH₄ emissions throughout these supply chains was quantified via Monte Carlo simulation. The method may be used to identify key factors that drive the range of life cycle emissions as well as the limits of precision of an LCA.

Results and discussion

Using this method, we statistically characterized the carbon footprint of coal power in the USA in 2009. Our method reveals that the average carbon footprint of coal power (100 year time horizon) ranges from 0.97 to 1.69 kg CO₂eq/kWh of generated electricity (95 % confidence interval), primarily due to variability in plant efficiency. Uncertainty in the carbon footprints of individual plants spans a factor of 1.04 for the least uncertain plant footprint to a factor of 1.2 for the most uncertain plant footprint (95 % uncertainty intervals). The uncertainty in the total carbon footprint of all US coal power plants spans a factor of 1.05.

Conclusions

We have developed and successfully implemented a framework for separating uncertainty and variability in the carbon footprint of coal-fired power plants. Reduction of uncertainty will not substantially reduce the range of predicted emissions. The range can only be reduced via substantial changes to the US coal power infrastructure. The finding that variability is larger than uncertainty can obviously not be generalized to other product systems and impact categories. Our framework can, however, be used to assess the relative influence of uncertainty and variability for a whole range of product systems and environmental impacts.     

Contribution of Urban Water Supply to Greenhouse Gas Emissions in China

Greenhouse gas (GHG) emissions from energy use in the water sector in China have not received the same attention as emissions from other sectors, but interest in this area is growing. This study uses 2011 data to investigate GHG emissions from electricity use for urban water supply in China. The objective is to measure the climate cobenefit of water conservation, compare China with other areas on a number of emissions indicators, and assist in development of policy that promotes low‐emission water supply. Per capita and per unit GHG emissions for water supplied to urban areas in China in 2011 were 24.5 kilograms carbon dioxide equivalent (kg CO₂‐eq) per capita per year and 0.213 kg CO₂‐eq per cubic meter, respectively. Comparison of provinces within China revealed that GHG emissions for urban water supply as a percentage of total province‐wide emissions from electricity use correlate directly with the rate of leakage and water loss within the water distribution system. This highlights controlling leakage as a possible means of reducing the contribution of urban water supply to GHG emissions. An inverse correlation was established between GHG emissions per unit water and average per capita daily water use, which implies that water demand tends to be higher when per unit emissions are lower. China's high emission factor for electricity generation inflates emissions for urban water supply. Shifting from emissions‐intensive electricity sources is crucial to reducing emissions in the water supply sector.     

Life cycle environmental impacts of decommissioning Magnox nuclear power plants in the UK

Purpose

Full life cycle assessment (LCA) impacts from decommissioning have rarely been assessed, largely because few sites have been decommissioned so that the impacts of decommissioning are currently uncertain. This paper presents the results of an LCA study of the ongoing decommissioning of the Magnox power plant at Trawsfynydd in the UK. These results have been used to estimate the potential environmental impacts for the whole UK Magnox fleet of 11 reactors that will have to be decommissioned during this century.

Methods

The functional unit is defined as ‘decommissioning one Magnox power plant’. The system boundary considers all stages in the life cycle of decommissioning, including site management, waste retrieval, plant deconstruction, packaging and storage of intermediate- and low-level wastes (ILW and LLW). High-level waste, i.e. waste fuel is excluded as it was being removed from the site to be reprocessed at Sellafield. The environmental impacts have been estimated using the CML 2001 methodology. Primary data have been sourced from the Trawsfynydd site and the background from Ecoinvent.

Results and discussion

Most impacts from decommissioning are due to the plant deconstruction (25–75 %) and ILW storage and disposal (25–70 %). For the example of global warming potential (GWP), estimated at 241 kt CO₂ eq./functional unit, or 3.5 g CO₂ eq./kWh of electricity generated during the lifetime of the plant, 55 % of the impact is from plant deconstruction and 30 % from ILW disposal. The results for the whole UK Magnox fleet indicate that the impacts vary greatly for different sites. For example, the GWP ranges from 0.89 to 7.14 g CO₂ eq./kWh. If the impacts from storage of waste fuel at Sellafield are included in the estimates, the GWP increases on average by four times. Overall, decommissioning of the UK Magnox reactors would generate 2 Mt of CO₂ eq. without and 11 Mt of CO₂ eq. with the waste from Sellafield. This represents 0.4 and 2 % of the total UK annual emissions, respectively.

Conclusions

The impacts of decommissioning can vary greatly at different sites depending on the amount of waste and electricity generated by the plants. Delaying decommissioning to allow the energy system to decarbonise could reduce the environmental impacts, e.g. GWP could be reduced by 50 %. The impacts could also be reduced by reducing the volume of waste and increasing recycling of materials. For example, recycling 70 % of steel would reduce the impacts on average by 34 %.     

Life cycle assessment of wind farms in Ethiopia

Purpose

The overall aim of this study is to contribute to the creation of LCA database on electricity generation systems in Ethiopia. This study specifically estimates the environmental impacts associated with wind power systems supplying high voltage electricity to the national grid. The study has regional significance as the Ethiopian electric system is already supplying electricity to Sudan and Djibouti and envisioned to supply to other countries in the region.

Materials and methods

Three different grid-connected wind power systems consisting of four different models of wind turbines with power rates between 1 and 1.67 MW were analyzed for the situation in Ethiopia. The assessment takes into account all the life cycle stages of the total system, cradle to grave, considering all the processes related to the wind farms: raw material acquisition, manufacturing of main components, transporting to the wind farm, construction, operation and maintenance, and the final dismantling and waste treatment. The study has been developed in line with the main principles of the ISO 14040 and ISO 14044 standard procedures. The analysis is done using SimaPro software 8.0.3.14 multi-user, Ecoinvent database version 3.01, and ReCiPe 2008 impact assessment method. The assumed operational lifetime as a baseline is 20 years.

Results and discussion

The average midpoint environmental impact of Ethiopian wind power system per kWh electricity generated is for climate change: 33.6 g CO₂ eq., fossil depletion: 8 g oil eq., freshwater ecotoxicity: 0.023 g 1,4-DCB eq., freshwater eutrophication: 0.005 g N eq., human toxicity: 9.9 g 1,4-DCB eq., metal depletion: 18.7 g Fe eq., marine ecotoxicity: 0.098 g 1,4-DCB eq., particulate matter formation: 0.097 g PM10 eq., photochemical oxidant formation: 0.144 g NMVOC, and terrestrial acidification: 0.21 g SO₂ eq. The pre-operation phase that includes the upstream life cycle stage is the largest contributor to all the environmental impacts, with shares ranging between 82 and 96%. The values of cumulative energy demand (CED) and energy return on investment (EROI) for the wind power system are 0.393 MJ and 9.2, respectively.

Conclusion

The pre-operation phase is the largest contributor to all the environmental impact categories. The sensitivity and scenario analyses indicate that changes in wind turbine lifespans, capacity factors, exchange rates for parts, transport routes, and treatment activities would result in significant changes in the LCA results.

     

Life cycle inventory for electricity generation in China

Background, Goal and Scope The objective of this study was to produce detailed a life cycle inventory (LCI) for the provision of 1 kWh of electricity to consumers in China in 2002 in order to identify areas of improvement in the industry. The system boundaries were processes in power stations, and the construction and operation of infrastructure were not included. The scope of this study was the consumption of fossil fuels and the emissions of air pollutants, water pollutants and solid wastes, which are listed as follows: (1) consumption of fossil fuels, including general fuels, such as raw coal, crude oil and natural gas, and the uranium used for nuclear power; (2) emissions of air pollutants from thermal power, hydropower and nuclear power plants; (3) emissions of water pollutants, including general water waste from fuel electric plants and radioactive waste fluid from nuclear power plants; (4) emissions of solid wastes, including fly ash and slag from thermal power plants and radioactive solid wastes from nuclear power plants. Methods Data were collected regarding the amount of fuel, properties of fuel and the technical parameters of the power plants. The emissions of CO₂, SO₂, NO_x, CH₄, CO, non-methane volatile organic compound (NMVOC), dust and heavy metals (As, Cd, Cr, Hg, Ni, Pb, V, Zn) from thermal power plants as well as fuel production and distribution were estimated. The emissions of CO₂ and CH₄ from hydropower plants and radioactive emissions from nuclear power plants were also investigated. Finally, the life cycle inventory for China’s electricity industry was calculated and analyzed. Results Related to 1 kWh of usable electricity in China in 2002, the consumption of coal, oil, gas and enriched uranium were 4.57E-01, 8.88E-03, 7.95E-03 and 9.03E-08 kg; the emissions of CO₂, SO₂, NO_x, CO, CH₄, NMVOC, dust, As, Cd, Cr, Hg, Ni, Pb, V, and Zn were 8.77E-01, 8.04E-03, 5.23E-03, 1.25E-03, 2.65E-03, 3.95E-04, 1.63E-02, 1.62E-06, 1.03E-08, 1.37E-07, 7.11E-08, 2.03E-07, 1.42E-06, 2.33E-06, and 1.94E-06 kg; the emissions of waste water, COD, coal fly ash, and slag were 1.31, 6.02E-05, 8.34E-02, and 1.87E-02 kg; and the emissions of inactive gas, halogen and gasoloid, tritium, non-tritium, and radioactive solid waste were 3.74E+01 Bq, 1.61E-01 Bq, 4.22E+01 Bq, 4.06E-02 Bq, and 2.68E-10 m³ respectively. Conclusions The comparison result between the LCI data of China’s electricity industry and that of Japan showed that most emission intensities of China’s electricity industry were higher than that of Japan except for NMVOC. Compared with emission intensities of the electricity industry in Japan, the emission intensities of CO₂ and Ni in China were about double; the emission intensities of NO_x, Cd, CO, Cr, Hg and SO₂ in China were more than 10 times that of Japan; and the emission intensities of CH₄, V, Pb, Zn, As and dust were more than 20 times. The reasons for such disparities were also analyzed. Recommendations and Perspectives To get better LCI for the electricity industry in China, it is important to estimate the life cycle emissions during fuel production and transportation for China. Another future improvement could be the development of LCIs for construction and operation of infrastructure such as factory buildings and dams. It would also be important to add the information about land use for hydropower.