Septal and lateral wall localization of PBP5, the major D,D‐carboxypeptidase of Escherichia coli,requires substrate recognition and membrane attachment

The distribution of PBP5, the major D,D‐carboxypeptidase in Escherichia coli, was mapped by immunolabelling and by visualization of GFP fusion proteins in wild‐type cells and in mutants lacking one or more D,D‐carboxypeptidases. In addition to being scattered around the lateral envelope, PBP5 was also concentrated at nascent division sites prior to visible constriction. Inhibiting PBP2 activity (which eliminates wall elongation) shifted PBP5 to midcell, whereas inhibiting PBP3 (which aborts divisome invagination) led to the creation of PBP5 rings at positions of preseptal wall formation, implying that PBP5 localizes to areas of ongoing peptidoglycan synthesis. A PBP5(S44G) active site mutant was more evenly dispersed, indicating that localization required enzyme activity and the availability of pentapeptide substrates. Both the membrane bound and soluble forms of PBP5 converted pentapeptides to tetrapeptides in vitro and in vivo, and the enzymes accepted the same range of substrates, including sacculi, Lipid II, muropeptides and artificial substrates. However, only the membrane‐bound form localized to the developing septum and restored wild‐type rod morphology to shape defective mutants, suggesting that the two events are related. The results indicate that PBP5 localization to sites of ongoing peptidoglycan synthesis is substrate dependent and requires membrane attachment.     

Lytic transglycosylases RlpA and MltC assist in Vibrio cholerae daughter cell separation

The cell wall is a crucial structural feature in the vast majority of bacteria and comprises a covalently closed network of peptidoglycan (PG) strands. While PG synthesis is important for survival under many conditions, the cell wall is also a dynamic structure, undergoing degradation and remodeling by ‘autolysins’, enzymes that break down PG. Cell division, for example, requires extensive PG remodeling, especially during separation of daughter cells, which depends heavily upon the activity of amidases. However, in Vibrio cholerae, we demonstrate that amidase activity alone is insufficient for daughter cell separation and that lytic transglycosylases RlpA and MltC both contribute to this process. MltC and RlpA both localize to the septum and are functionally redundant under normal laboratory conditions; however, only RlpA can support normal cell separation in low‐salt media. The division‐specific activity of lytic transglycosylases has implications for the local structure of septal PG, suggesting that there may be glycan bridges between daughter cells that cannot be resolved by amidases. We propose that lytic transglycosylases at the septum cleave PG strands that are crosslinked beyond the reach of the highly regulated activity of the amidase and clear PG debris that may block the completion of outer membrane invagination.     

DipM,a new factor required for peptidoglycan remodelling during cell division in Caulobacter crescentus

In bacteria, cytokinesis is dependent on lytic enzymes that facilitate remodelling of the cell wall during constriction. In this work, we identify a thus far uncharacterized periplasmic protein, DipM, that is required for cell division and polarity in Caulobacter crescentus. DipM is composed of four peptidoglycan binding (LysM) domains and a C‐terminal lysostaphin‐like (LytM) peptidase domain. It binds to isolated murein sacculi in vitro, and is recruited to the site of constriction through interaction with the cell division protein FtsN. Mutational analyses showed that the LysM domains are necessary and sufficient for localization of DipM, while its peptidase domain is essential for function. Consistent with a role in cell wall hydrolysis, DipM was found to interact with purified murein sacculi in vitro and to induce cell lysis upon overproduction. Its inactivation causes severe defects in outer membrane invagination, resulting in a significant delay between cytoplasmic compartmentalization and final separation of the daughter cells. Overall, these findings indicate that DipM is a periplasmic component of the C. crescentus divisome that facilitates remodelling of the peptidoglycan layer and, thus, coordinated constriction of the cell envelope during the division process.     

Peptidoglycan transformations during Bacillus subtilis sporulation

While vegetative Bacillus subtilis cells and mature spores are both surrounded by a thick layer of peptidoglycan (PG, a polymer of glycan strands cross‐linked by peptide bridges), it has remained unclear whether PG surrounds prespores during engulfment. To clarify this issue, we generated a slender ΔponA mutant that enabled high‐resolution electron cryotomographic imaging. Three‐dimensional reconstructions of whole cells in near‐native states revealed a thin PG‐like layer extending from the lateral cell wall around the prespore throughout engulfment. Cryotomography of purified sacculi and fluorescent labelling of PG in live cells confirmed that PG surrounds the prespore. The presence of PG throughout engulfment suggests new roles for PG in sporulation, including a new model for how PG synthesis might drive engulfment, and obviates the need to synthesize a PG layer de novo during cortex formation. In addition, it reveals that B. subtilis can synthesize thin, Gram‐negative‐like PG layers as well as its thick, archetypal Gram‐positive cell wall. The continuous transformations from thick to thin and back to thick during sporulation suggest that both forms of PG have the same basic architecture (circumferential). Endopeptidase activity may be the main switch that governs whether a thin or a thick PG layer is assembled.     

Different Binding Specificities of S-Layer Homology Modules from Clostridium thermocellum AncA,Slp1, and Slp2

S-layer homology (SLH) module polypeptides were derived from Clostridium thermocellum S-layer proteins Slp1 and Slp2 and cellulosome anchoring protein AncA as rSlp1-SLH, rSlp2-SLH, and rAncA-SLH respectively. Their binding specificities were investigated using C. thermocellum cell-wall preparations. rAncA-SLH associated with native peptidoglycan-containing sacculi from C. thermocellum, including both peptidoglycan and secondary cell wall polymers (SCWP), but not to hydrofluoric acid-extracted peptidoglycan-containing sacculi (HF-EPCS) lacking SCWPs, suggesting that SCWPs are responsible for binding with SLH modules of AncA. On the other hand, rSlp1-SLH and rSlp2-SLH associated with HF-EPCS, suggesting that these polypeptides had an affinity for peptidoglycan. A binding assay using a peptidoglycan fraction prepared from Escherichia coli cells definitely confirmed that rSlp1-SLH and rSlp2-SLH specifically interacted with peptidoglycan but not with SCWP.     

Binding of S-layer homology modules from Clostridium thermocellum SdbA to peptidoglycans

S-layer homology (SLH) module polypeptides were derived from Clostridium josui xylanase Xyn10A, Clostridium stercorarium xylanase Xyn10B, and Clostridium thermocellum scafoldin dockerin binding protein SdbA as rXyn10A-SLH, rXyn10B-SLH, and rSdbA-SLH, respectively. Their binding specificities were investigated using various cell wall preparations. rXyn10A-SLH and rXyn10B-SLH bound to native peptidoglycan-containing sacculi consisting of peptidoglycan and secondary cell wall polymers (SCWP) prepared from these bacteria but not to hydrofluoric acid-extracted peptidoglycan-containing sacculi (HF-EPCS) lacking SCWP, suggesting that SCWP are responsible for binding with SLH modules. In contrast, rSdbA-SLH interacted with HF-EPCS, suggesting that this polypeptide had an affinity for peptidoglycans but not for SCWP. The affinity of rSdbA-SLH for peptidoglycans was confirmed by a binding assay using a peptidoglycan fraction prepared from Escherichia coli cells. The SLH modules of SdbA must be useful for cell surface engineering in bacteria that do not contain SCWP.     

Effects of Low PBP2b Levels on Cell Morphology and Peptidoglycan Composition in Streptococcus pneumoniae R6

Streptococcus pneumoniae produces two class B penicillin-binding proteins, PBP2x and PBP2b, both of which are essential. It is generally assumed that PBP2x is specifically involved in septum formation, while PBP2b is dedicated to peripheral cell wall synthesis. However, little experimental evidence exists to substantiate this belief. In the present study, we obtained evidence that strongly supports the view that PBP2b is essential for peripheral peptidoglycan synthesis. Depletion of PBP2b expression gave rise to long chains of cells in which individual cells were compressed in the direction of the long axis and looked lentil shaped. This morphological change is consistent with a role for pneumococcal PBP2b in the synthesis of the lateral cell wall. Depletion of PBP2x, on the other hand, resulted in lemon-shaped and some elongated cells with a thickened midcell region. Low PBP2b levels gave rise to changes in the peptidoglycan layer that made pneumococci sensitive to exogenously added LytA during logarithmic growth and refractory to chain dispersion upon addition of LytB. Interestingly, analysis of the cell wall composition of PBP2b-depleted pneumococci revealed that they had a larger proportion of branched stem peptides in their peptidoglycan than the corresponding undepleted cells. Furthermore, MurM-deficient mutants, i.e., mutants lacking the ability to synthesize branched muropeptides, were found to require much higher levels of PBP2b to sustain growth than those required by MurM-proficient strains. These findings might help to explain why increased incorporation of branched muropeptides is required for high-level beta-lactam resistance in S. pneumoniae.     

Identification of MltG as a potential terminase for peptidoglycan polymerization in bacteria

Bacterial cells are fortified against osmotic lysis by a cell wall made of peptidoglycan (PG). Synthases called penicillin‐binding proteins (PBPs), the targets of penicillin and related antibiotics, polymerize the glycan strands of PG and crosslink them into the cell wall meshwork via attached peptides. The average length of glycan chains inserted into the matrix by the PBPs is thought to play an important role in bacterial morphogenesis, but polymerization termination factors controlling this process have yet to be discovered. Here, we report the identification of Escherichia coli MltG (YceG) as a potential terminase for glycan polymerization that is broadly conserved in bacteria. A clone containing mltG was initially isolated in a screen for multicopy plasmids generating a lethal phenotype in cells defective for the PG synthase PBP1b. Biochemical studies revealed that MltG is an inner membrane enzyme with endolytic transglycosylase activity capable of cleaving at internal positions within a glycan polymer. Radiolabeling experiments further demonstrated MltG‐dependent nascent PG processing in vivo, and bacterial two‐hybrid analysis identified an MltG‐PBP1b interaction. Mutants lacking MltG were also shown to have longer glycans in their PG relative to wild‐type cells. Our combined results are thus consistent with a model in which MltG associates with PG synthetic complexes to cleave nascent polymers and terminate their elongation.     

Protein content of peptidoglycan of liquid-grown cells differs from that of surface-grown,gliding Cytophaga johnsonae

The peptidoglycan sacculi of surface-grown Cytophaga johnsonae had associated with them a large amoutn of protein (the major species is 50 kDa) whereas sacculi from liquid-grown cells had little or no attached protein. The 50 kDa protein was localized in the outer membrane of liquid-grown cells. A portion of this membrane-derived 50 kDa protein was attached to the peptidoglycan only when the cells made contact with the substratum. Protein synthesis did not appear to be required for attachment as the process was not inhibited by chloramphenicol. Association of the 50 kDa protein with the peptidoglycan in response to cell contact with the substratum is suggested.     

The crystal structure of Clostridium perfringens SleM,a muramidase involved in cortical hydrolysis during spore germination

Clostridium perfringens spores employ two peptidoglycan lysins to degrade the spore cortex during germination. SleC initiates cortex hydrolysis to generate cortical fragments that are degraded further by the muramidase SleM. Here, we present the crystal structure of the C. perfringens S40 SleM protein at 1.8 Å. SleM comprises an N‐terminal catalytic domain that adopts an irregular α/β‐barrel fold that is common to GH25 family lysozymes, plus a C‐terminal fibronectin type III domain. The latter is involved in forming the SleM dimer that is evident in both the crystal structure and in solution. A truncated form of SleM that lacks the FnIII domain shows reduced activity against spore sacculi indicating that this domain may have a role in facilitating the position of substrate with respect to the enzyme's active site. Proteins 2016; 84:1681–1689. © 2016 Wiley Periodicals, Inc.     

FtsEX is required for CwlO peptidoglycan hydrolase activity during cell wall elongation in Bacillus subtilis

The peptidoglycan (PG) sacculus, a meshwork of polysaccharide strands cross‐linked by short peptides, protects bacterial cells against osmotic lysis. To enlarge this covalently closed macromolecule, PG hydrolases must break peptide cross‐links in the meshwork to allow insertion of new glycan strands between the existing ones. In the rod‐shaped bacterium Bacillus subtilis, cell wall elongation requires two redundant endopeptidases, CwlO and LytE. However, it is not known how these potentially autolytic enzymes are regulated to prevent lethal breaches in the cell wall. Here, we show that the ATP‐binding cassette transporter‐like FtsEX complex is required for CwlO activity. In Escherichia coli, FtsEX is thought to harness ATP hydrolysis to activate unrelated PG hydrolases during cell division. Consistent with this regulatory scheme, B. subtilis FtsE mutants that are unable to bind or hydrolyse ATP cannot activate CwlO. Finally, we show that in cells depleted of both CwlO and LytE, the PG synthetic machinery continues moving circumferentially until cell lysis, suggesting that cross‐link cleavage is not required for glycan strand polymerization. Overall, our data support a model in which the FtsEX complex is a remarkably flexible regulatory module capable of controlling a diverse set of PG hydrolases during growth and division in different organisms.     

Cell division is antagonized by the activity of peptidoglycan endopeptidases that promote cell elongation

A peptidoglycan (PG) cell wall composed of glycans crosslinked by short peptides surrounds most bacteria and protects them against osmotic rupture. In Escherichia coli, cell elongation requires crosslink cleavage by PG endopeptidases to make space for the incorporation of new PG material throughout the cell cylinder. Cell division, on the contrary, requires the localized synthesis and remodeling of new PG at midcell by the divisome. Little is known about the factors that modulate transitions between these two modes of PG biogenesis. In a transposon-insertion sequencing screen to identify mutants synthetically lethal with a defect in the division protein FtsP, we discovered that mutants impaired for cell division are sensitive to elevated activity of the endopeptidases. Increased endopeptidase activity in these cells was shown to interfere with the assembly of mature divisomes, and conversely, inactivation of MepS was found to suppress the lethality of mutations in essential division genes. Overall, our results are consistent with a model in which the cell elongation and division systems are in competition with one another and that control of PG endopeptidase activity represents an important point of regulation influencing the transition from elongation to the division mode of PG biogenesis.     

Architecture and assembly of the Gram‐positive cell wall

The bacterial cell wall is a mesh polymer of peptidoglycan – linear glycan strands cross‐linked by flexible peptides – that determines cell shape and provides physical protection. While the glycan strands in thin ‘Gram‐negative’ peptidoglycan are known to run circumferentially around the cell, the architecture of the thicker ‘Gram‐positive’ form remains unclear. Using electron cryotomography, here we show that Bacillus subtilis peptidoglycan is a uniformly dense layer with a textured surface. We further show it rips circumferentially, curls and thickens at free edges, and extends longitudinally when denatured. Molecular dynamics simulations show that only atomic models based on the circumferential topology recapitulate the observed curling and thickening, in support of an ‘inside‐to‐outside’ assembly process. We conclude that instead of being perpendicular to the cell surface or wrapped in coiled cables (two alternative models), the glycan strands in Gram‐positive cell walls run circumferentially around the cell just as they do in Gram‐negative cells. Together with providing insights into the architecture of the ultimate determinant of cell shape, this study is important because Gram‐positive peptidoglycan is an antibiotic target crucial to the viability of several important rod‐shaped pathogens including Bacillus anthracis, Listeria monocytogenes, and Clostridium difficile.     

Visualizing the production and arrangement of peptidoglycan in Gram‐positive cells

Decades of study have revealed the fine chemical structure of the bacterial peptidoglycan cell wall, but the arrangement of the peptidoglycan strands within the wall has been challenging to define. The application of electron cryotomography (ECT) and new methods for fluorescent labelling of peptidoglycan are allowing new insights into wall structure and synthesis. Two articles in this issue examine peptidoglycan structures in the model Gram‐positive species Bacillus subtilis. Beeby et al. combined visualization of peptidoglycan using ECT with molecular modelling of three proposed arrangements of peptidoglycan strands to identify the model most consistent with their data. They argue convincingly for a Gram‐positive wall containing multiple layers of peptidoglycan strands arranged circumferentially around the long axis of the rod‐shaped cell, an arrangement similar to the single layer of peptidoglycan in similarly shaped Gram‐negative cells. Tocheva et al. examined sporulating cells using ECT and fluorescence microscopy to demonstrate the continuous production of a thin layer of peptidoglycan around the developing spore as it is engulfed by the membrane of the adjacent mother cell. The presence of this peptidoglycan in the intermembrane space allows the refinement of a model for engulfment, which has been known to include peptidoglycan synthetic and lytic functions.     

Structural insights into the binding and catalytic mechanisms of the Listeria monocytogenes bacteriophage glycosyl hydrolase PlyP40

Endolysins are bacteriophage‐encoded peptidoglycan hydrolases that specifically degrade the bacterial cell wall at the end of the phage lytic cycle. They feature a distinct modular architecture, consisting of enzymatically active domains (EADs) and cell wall‐binding domains (CBDs). Structural analysis of the complete enzymes or individual domains is required for better understanding the mechanisms of peptidoglycan degradation and provides guidelines for the rational design of chimeric enzymes. We here report the crystal structure of the EAD of PlyP40, a member of the GH‐25 family of glycosyl hydrolases, and the first muramidase reported for Listeria phages. Site‐directed mutagenesis confirmed key amino acids (Glu98 and Trp10) involved in catalysis and substrate stabilization. In addition, we found that PlyP40 contains two heterogeneous CBD modules with homology to SH3 and LysM domains. Truncation analysis revealed that both domains are required for full activity but contribute to cell wall recognition and lysis differently. Replacement of CBDP40 with a corresponding domain from a different Listeria phage endolysin yielded an enzyme with a significant shift in pH optimum. Finally, domain swapping between PlyP40 and the streptococcal endolysin Cpl‐1 produced an intergeneric chimera with activity against Listeria cells, indicating that structural similarity of individual domains determines enzyme function.     

Chemical composition of the peptidoglycan-free cell walls of methanogenic bacteria

Cell walls were prepared from freeze-dried samples of 7 strains of Methanobacterium by mechanical disintegration of the cells followed by incubation with trypsin. Electron microscopy revealed the presence of sacculi exhibiting the shape of the original cells, on which no surface structure could be detected. Ultrathin sections of the isolated sacculi showed a homogenously electron dense layer of about 10–15 nm in width. The ash content varied between 8 and 18% of dry weight. The sacculi of all the strains contained Lys: Ala: Glu: GlcNAc or GalNAc in a molar ratio of about 1:1.2:2:1. In one strain (M. ruminantium M 1) alanine is replaced by threonine, however. Neutral sugars and-in some strains-additional amounts of the amino sugars were present in variable amounts, and could be removed by formamide extraction or HF treatment without destroying the sacculi. No muramic acid or d-amino acids typical of peptidoglycan were found. Therefore, the sacculi of the methanobacteria consist of a different polymer containing a set of three l-amino acids and one N-acetylated amino sugar. From cells of Methanospirillum hungatii no sacculi, but tube-like sheaths could be isolated, which tend to fracture perpendicularly to the long axis of the sheath along the fibrills seen on the surface. The sheaths consist of protein containing 18 amino acids and small amounts of neutral sugars. They are resistent to the proteinases tested and are not disintegrated by boiling in 2% sodium dodecylsulfate for 30 min.The three Gram-negative strains Black Sea isolate JR-1, Cariaco isolate JR-1 and Methanobacterium mobile do not contain a rigid sacculus, but merely a SDS-sensitive surface layer composed of regularly arranged protein subunits. This evidence indicates that, within the methanogens, different cell wall polymers characteristic of particular groups of organisms may have evolved during evolution, and supports the hypothesis that the evolution of the methanogens was separated from that of the peptidoglycan-containing procaryotic organisms at a very early stage.Non Standard Abbreviations SDS sodium dodecylsulfate - EDTA ethylenediaminetetra acetic acid - DNP dinitrophenyl Dedicated to Prof. Dr. Adolf Butenandt on the occasion of his 75th birthday     

An early cytoplasmic step of peptidoglycan synthesis is associated to MreB in Bacillus subtilis

MreB proteins play a major role during morphogenesis of rod‐shaped bacteria by organizing biosynthesis of the peptidoglycan cell wall. However, the mechanisms underlying this process are not well understood. In Bacillus subtilis, membrane‐associated MreB polymers have been shown to be associated to elongation‐specific complexes containing transmembrane morphogenetic factors and extracellular cell wall assembly proteins. We have now found that an early intracellular step of cell wall synthesis is also associated to MreB. We show that the previously uncharacterized protein YkuR (renamed DapI) is required for synthesis of meso‐diaminopimelate (m‐DAP), an essential constituent of the peptidoglycan precursor, and that it physically interacts with MreB. Highly inclined laminated optical sheet microscopy revealed that YkuR forms uniformly distributed foci that exhibit fast motion in the cytoplasm, and are not detected in cells lacking MreB. We propose a model in which soluble MreB organizes intracellular steps of peptidoglycan synthesis in the cytoplasm to feed the membrane‐associated cell wall synthesizing machineries.     

Sensitivity to the two‐peptide bacteriocin lactococcin G is dependent on UppP,an enzyme involved in cell‐wall synthesis

Most bacterially produced antimicrobial peptides (bacteriocins) are thought to kill target cells by a receptor‐mediated mechanism. However, for most bacteriocins the receptor is unknown. For instance, no target receptor has been identified for the two‐peptide bacteriocins (class IIb), whose activity requires the combined action of two individual peptides. To identify the receptor for the class IIb bacteriocin lactococcin G, which targets strains of Lactococcus lactis, we generated 12 lactococcin G‐resistant mutants and performed whole‐genome sequencing to identify mutations causing the resistant phenotype. Remarkably, all had a mutation in or near the gene uppP (bacA), encoding an undecaprenyl pyrophosphate phosphatase; a membrane protein involved in peptidoglycan synthesis. Nine mutants had stop codons or frameshifts in the uppP gene, two had point mutations in putative regulatory regions and one caused an amino acid substitution in UppP. To verify the receptor function of UppP, it was shown that growth of non‐sensitive Streptococcus pneumoniae could be inhibited by lactococcin G when L. lactis uppP was expressed in this bacterium. Furthermore, we show that the related class IIb bacteriocin enterocin 1071 also uses UppP as receptor. The approach used here should be broadly applicable to identify receptors for other bacteriocins as well.     

Identification of YfiH (PgeF) as a factor contributing to the maintenance of bacterial peptidoglycan composition

Peptidoglycan (PG) is an essential, envelope‐fortifying macromolecule of eubacterial cell walls. It is a large polymer with multiple glycan strands interconnected by short peptide chains forming a sac‐like structure around cytoplasmic membrane. In most bacteria, the composition of the peptide chain is well‐conserved and distinctive; in E. coli, the peptide chain length varies from two to five amino acids with a tetrapeptide consisting of L‐alanine – D‐glutamic acid – meso‐diaminopimelic acid – D‐alanine. However, it is not known how bacteria conserve the composition and sequence of peptide chains of PG. Here, we find that a conserved open reading frame of unknown function, YfiH (renamed PgeF) contributes to the maintenance of peptide composition in E. coli. Using genetic, biochemical and mass spectrometrical analyses we demonstrate that absence of yfiH results in incorporation of non‐canonical amino acids, L‐serine or glycine in place of L‐alanine in PG sacculi leading to β‐lactam – sensitivity, lethality in mutants defective in PG remodelling or recycling pathways, altered cell morphology and reduced PG synthesis. yfiH orthologs from other Gram‐positive genera were able to compensate the absence of yfiH in E. coli indicating a conserved pathway in bacterial kingdom. Our results suggest editing/quality control mechanisms exist to maintain composition and integrity of bacterial peptidoglycan.     

A new factor stimulating peptidoglycan hydrolysis to separate daughter cells in Caulobacter crescentus

Cell division in Gram‐negative bacteria involves the co‐ordinated invagination of the three cell envelope layers to form two new daughter cell poles. This complex process starts with the polymerization of the tubulin‐like protein FtsZ into a Z‐ring at mid‐cell, which drives cytokinesis and recruits numerous other proteins to the division site. These proteins are involved in Z‐ring constriction, inner‐ and outer‐membrane invagination, peptidoglycan remodelling and daughter cell separation. Three papers in this issue of Molecular Microbiology, from the teams of Lucy Shapiro, Martin Thanbichler and Christine Jacobs‐Wagner, describe a novel protein, called DipM for Division Involved Protein with LysM domains, that is required for cell division in Caulobacter crescentus. DipM localizes to the mid‐cell during cell division, where it is necessary for the hydrolysis of the septal peptidoglycan to remodel the cell wall. Loss of DipM results in severe defects in cell envelope constriction, which is deleterious under fast‐growth conditions. State‐of‐the‐art microscopy experiments reveal that the peptidoglycan is thicker and that the cell wall is incorrectly organized in DipM‐depleted cells compared with wild‐type cells, demonstrating that DipM is essential for reorganizing the cell wall at the division site, for envelope invagination and cell separation in Caulobacter.