UV inducible UV protection and mutation functions on the I group plasmid TP110

Summary The UV protection and mutation properties of the I group plasmid TP110 have been investigated. It is demonstrated that the genes responsible for these effects are able to complement the deficiency in umuC36 mutants of E. coli, as are the similar genes carried by the B group plasmid R16. Mu-lac inserts into TP110 have been isolated which abolish the UV protection and mutation functions. Restriction mapping of these inserts locates them within a single region of the genome. A comparison of the restriction sites of this region with the muc region of pKM101 reveals very little similarity. Expression of -galactosidase in those Mu-lac inserts in which the lacZ gene is fused to the promoter for the protection and mutation functions is inducible by DNA damaging agents, and induction in mutant strains suggests that these genes are under the direct control of the lexA repressor.     

DNA sequence analysis of the imp UV protection and mutation operon of the plasmid TP110: identification of a third gene.

The sequence of the imp operon of the plasmid TP110 (which belongs to the Incl1 incompatibility group) has been determined, and is shown to contain three open reading frames. This operon, involved in UV protection and mutation, is functionally analogous to the umuDC operon of E. coli and the mucAB operon of the plasmid pKM101, which belongs to the quite unrelated IncN incompatibility group. The umu and muc operons however contain only two open reading frames, coding for proteins of approximately 16kD and 46kD. The high degree of homology between the two 16kD proteins (UmuD and MucA) and between the two 46kD proteins (UmuC and MucB) clearly shows their relatedness. This is shown also to extend to the imp gene products, with ImpA sharing homology with UmuD and MucA, and ImpB sharing homology with UmuC and MucB. However, the two imp genes are preceded in the operon by a third gene, impC, which encodes a small protein of 9.5kD and which has no equivalent in the umu and muc operons.     

Regulation of expression of the colicin gene of I1 group plasmid TP110.

The control of expression of the colicin Ib gene of the I1 group plasmid TP110 has been investigated. The colicin promoter was fused to the structural gene for beta-galactosidase, using the Mu d(Aprlac) phage, and the plasmid carrying this fusion was introduced into a variety of bacterial strains defective in genes involved in the "SOS" response. Colicin Ib belongs to that group of genes directly controlled by the repressor produced by the lexA gene, and expression was inducible by DNA-damaging agents. Mutations in uvrA, -B, and -C reduced the efficiency of induction by mitomycin C, as did mutations in recB. Mutations in recA and recF effectively prevented induction by mitomycin C, whereas mutations in lexA had contrasting effects, depending upon their effect on the properties of lexA protein. The spr-51 mutation (which inactivates lexA protein) led to constitutive expression, whereas the lexA3 mutation (which makes lexA protein refractory to cleavage by recA protein) completely inhibited inducible expression. In addition to lexA control, a TP110-coded function was identified which appeared able to inhibit colicin expression when the gene responsible was present in high copy number.     

Molecular homology and incompatibility in the IncFI plasmid Group

The usual grounds for the inclusion of a plasmid in a particular incompatibility group are its mutual incompatibility with a type plasmid of that group, and, in some cases, the demonstration of shared regions of specific homology, presumed to be related to DNA replication. We have found that some plasmids classified as IncFI on genetical grounds share no homology with the previously described incompatibility regions of F on the basis of hybridization of specific radioactive probes to restriction enzyme digests of DNA from these plasmids. Others show homology with some or all of the regions of the F plasmid that can express incompatibility. The incompatibility behaviour of these plasmids has been examined to determine the relationship between the possession of regions of homology and the expression of incompatibility. Three plasmids, ColV3-K30, pHH507 and Entp307, show homology only with the secondary replicon of F and appear to use sequences homologous with the secondary F replicon in their replication. The results are consistent with the propositions that some contemporary IncFI plasmids arose by the integration of several replicons, and, in general, the replicon not being used for replicon expresses its incompatibility, as does the replicon being used for replication. We conclude that incompatibility of two plasmids with F does not necessarily demonstrate relatedness of the plasmids to each other, and that inclusion within the IncFI group can result from the possession of any of several combinations of inc sequences.     

ColE1 plasmid incompatibility: localization and analysis of mutations affecting incompatibility.

Deletion mutants of plasmid ColE1 that involve the replication origin and adjacent regions of the plasmid have been studied to determine the mechanism by which those mutations affect the expression of plasmid incompatibility. It was observed that (i) a region of ColE1 that is involved in the expression of plasmid incompatibility lies between base pairs -185 and -684; (ii) the integrity of at least part of the region of ColE1 DNA between base pairs -185 and -572 is essential for the expression of ColE1 incompatibility; (iii) the expression of incompatibility is independent of the ability of the ColE1 genome to replicate autonomously; (iv) plasmid incompatibility is affected by plasmid copy number; and (v) ColE1 plasmid-mediated DNA replication of the lambda phage-ColE1 chimera lambda imm434 Oam29 Pam3 ColE1 is inhibited by ColE1-incompatible but not by ColE1-compatible plasmids.     

Influence of spv plasmid genes group in Salmonella Enteritidis virulence for chickens. I. Occurrence of spv plasmid genes group in Salmonella Enteritidis large virulence plasmid

Many Salmonella Enteritidis virulence factors are encoded by genes localized on plasmids, especially large virulence plasmid, in highly conserved fragment, they create spv plasmid gene group. The aims of realized researches were spv genes occurrence evaluation and composition analysis among Salmonella Enteritidis strains caused infection in chickens. Researches were realized on 107 isolates, where in every cases large virulence plasmid 59 kbp size were detected. Specific nucleotides sequences of spv genes (spvRABCD) were detected in 47.7% of isolates. In the rest of examined bacteria spv genes occurred variably. Most often extreme genes of spv group, like spvR and spvD were absent, what could indicate that factors encoded by them are not most important for Salmonella Enteritidis live and their expressed virulence.     

Structural-functional organization of the incompatibility group P plasmid pBS221

Plasmid pBS221 was physically mapped for restriction endonucleases EcoRI, BamHI, BglII, HindIII. The regions essential for the plasmid existence and participating in replication (oriV trfA*) and mobilization (mob) were cloned. The tet determinant and oriV trfA* regions were localized on the physical map of the plasmid. A DNA sequence homologous to genes of Tn501 mer operon was detected in this plasmid. The studies on homology of plasmids RP4 (IncP alpha), R751 (IncP beta) and pBS221 plasmid suggest that the latter belongs to the IncP beta subgroup.     

Restriction endonuclease mapping of the HI2 incompatibility group plasmid R478.

A restriction map of the 272-kb IncHI2 plasmid R478 was constructed by using the enzymes ApaI, XbaI, SalI, and XhoI. The map was derived from cloned restriction fragments from R478 inserted into cosmid and plasmid vectors as well as from double-digestion analysis of R478 and R478 miniplasmids. All previously known resistance determinants were cloned from R478, and their positions were located on the restriction map. A region involved in incompatibility was cloned and mapped. The location of a previously unreported arsenite resistance gene was also determined. The genes encoding tellurite resistance, colicin B resistance, and phage inhibition were found to be associated with a 6.7-kb SalI fragment of R478.     

Mapping of transfer regions within incompatibility group HI plasmid R27.

Plasmids of incompatibility group HI are large (greater than 150 kilobases [kb]) and possess an unusual thermosensitive mode of conjugative transfer. R27, the prototype IncHi1 plasmid, encodes resistance to tetracycline via a determinant which is related to transposon Tn10. A restriction endonuclease map of R27 (size, 182 kb) was recently constructed with ApaI, PstI, and XbaI. Transfer genes within R27 were mapped by insertion of Tn5 and Tn7. At least two different regions of the plasmid were concerned with transfer functions. Insertions into either region completely abolished transfer. None of the insertions had any effect on entry exclusion (Eex) of other IncH plasmids. However, a deletion mutant which lacked the Eex function was obtained, allowing us to map the probable site of the gene encoding Eex to one of the two transfer regions. The tetracycline resistance determinant in R27 was located within an 8-kb region between the two main transfer regions. The transfer genes, therefore, are not located together in R27 but are situated in at least two major widely separated transfer regions.     

A rapid method for determining the incompatibility group of R plasmid

A rapid method for determining plasmid incompatibility group by agarose gel electrophoresis is described. This procedure requires only 4 or 5 days and is especially useful when it is not possible to distinguish two plasmids in the same cell by their antibiotic resistance patterns.     

Molecular cloning and functional analysis of DNA regions of plasmid RP4 determining the incompatibility properties

Sau3A-generated DNA fragments determining incompatibility functions of the plasmid RP4 were cloned on the vectors pTK16 and pBR322. Inc+ recombinant plasmids were divided into two types: 1) expressing incompatibility only towards the homologous RP4 replicon, 2) expressing incompatibility - both towards the homologous RP4 replicon and towards the heterologous replicons of plasmids R906 and R751. For one member of the first type plasmids it was shown that the cloned Inc+-specific insertion derived from the region of location of the EcoRI restriction site. The majority of the Inc+ recombinant plasmids showed asymmetric expression of incompatibility, predominantly eliminating the resident IncP plasmid.     

Restriction endonuclease mapping of R27 (TP117), an incompatibility group HI subgroup 1 plasmid from Salmonella typhimurium

A circular map of the IncHI plasmid R27 corresponding to a genome size of 182 kb was established using the restriction endonucleases ApaI, XbaI, and PstI. The map was derived from the results obtained by hybridizing individual ApaI and XbaI fragments to blotted digests of the plasmid, as well as from complete and partial digests. Analysis of a deletion mutant derived by in vitro digestion with PstI and of transfer-defective and tetracycline-sensitive deletion mutants of R27 derived by Tn5 insertion were instrumental in determining the positions of some fragments.     

Characterization of transfer regions within the HII incompatibility group plasmid pHH1508a.

A circular map of the 208-kilobase IncHII plasmid pHH1508a was constructed by using the restriction endonucleases XbaI, XhoI, and NotI. Tn5 insertion mutagenesis showed that transfer genes were distributed widely over the plasmid map. Analysis of the deletion mutant pDT1178 indicated that genes required for conjugative pilus production are located in a 96.0-kilobase region of the plasmid.     

Mapping of the drug resistance genes carried by the r-determinant of the R100.1 plasmid

Summary We have cloned the EcoRI fragments of pLC1, a circular DNA element found in an Escherichia coli dnaA _ts strain integratively suppressed by R100.1 (Chandler et al., 1977a), using the plasmid vector pCR1. All the resistance genes known to be present on the r-determinant of R100.1 were found to be present on pLC1. The isolation of pCR1 derivatives carrying various EcoRI fragments of either pLC1 or R100.1 has allowed a more precise mapping of the position of the resistance genes on the R100.1 molecule.     

Genetic analysis of the inter-relationship between plasmid replication and incompatibility

Summary The relationship between replication control and plasmid incompatibility has been investigated using a composite replicon, pPM1, which consists of the pSC101 plasmid ligated to another small multicopy plasmid, RSF1050. Since pPM1 can utilise the replication system of either of the two functionally distinct components, propagation of the composite plasmid can occur in the presence of a mutation of one of its moieties. Such mutants are detected by their inability to rescue the composite plasmid under conditions not permissive for replication of the other moiety. Mutations in incompatibility functions can be detected by the failure of the composite replicon to exclude co-existing plasmids carrying a replication system identical to the one on pPM1.The inability of the composite plasmid to replicate at 42° in a host synthesizing temperature-sensitive DNA polymerase I, which is required by the RSF1050 replication system, was used to isolate pPM1 mutants defective in replication of the pSC101 component. Mutants defective in the incompatibility functions of pSC101 were obtained by selecting derivatives that allow the stable coexistence of a second pSC101 replicon in the same cell. Analysis of these two classes of mutants indicates that plasmids selected for defective pSC101 replication ability nevertheless retain pSC101 incompatibility. In contrast, plasmid mutants that have lost incompatibility functions were found always to be defective in replication ability.     

Molecular-genetic organization of plasmid R89S of the incompatibility group Q

A new IncQ plasmid R89S has been analysed by molecular-genetic methods. A restriction map of this plasmid has been constructed and regions of homology with the plasmid RSF1010 have been identified. A genetic map of the plasmid R89S has been prepared based on the deletion and insertion plasmid derivatives. The phenotypic analysis of the derivatives has identified the location of genes coding for replication, incompatibility, mobilization for genetic transfer and resistance to streptomycin in the genome of R89S.     

Mutational analysis of an ssi region carried by plasmid pACYC184

To investigate the functional contribution of some structural components of the signal that directs single-stranded initiation of DNA replication (ssi signal) carried by a 119-nt segment of plasmid pACYC184 (Bahk et al., 1988), we constructed mutants carrying one-base substitutions and insertions using oligodeoxyribonucleotide (oligo) directed mutagenesis. Two one-base substitution mutants were obtained. The mutants, M13 delta lac 184/Sp and M13 delta lac 184/Ev, carried an SplI site and an EcoRV site, respectively, created by base substitution. Three kinds of synthetic oligos, that is, a 10-bp EcoRI linker, an 8-bp ScaI linker and an 8-bp SmaI linker, were inserted into the SplI site of M13 delta lac 184/Sp, and into the EcoRV site of M13 delta lac 184/Ev. The SSI activity of each mutant examined indicated that the one-base substitutions had different effects on the SSI functions of the altered ssi signals. This fact suggests that some structural components within the 119-bp region make distinct contributions to the SSI function. Moreover, when the three kinds of synthetic linkers were inserted into the mutants M13 delta lac 184/Sp and M13 delta lac 184/Ev, each of the insertion mutations affected the rate of conversion of ss DNA to RFI in vivo and the growth of the recombinant phages in a distinct manner. Judging from the above results, the base composition and the length of a certain specific site were crucial for maintenance of the SSI functional activity, and structural components of the ssi signal contributed distinctly to the SSI function.