Possible antagonism of (Z)‐2‐hexenyl (E)‐3‐hexenoate against the attractiveness of (E)‐2‐hexenyl (Z)‐3‐hexenoate to Ooencyrtus nezarae (Hymenoptera: Encyrtidae)

Ooencyrtus nezarae (Hymenoptera: Encyrtidae) is an egg parasitoid of bean bug Riptortus pedestris (Hemiptera: Alydidae) which is a major pest of beans. Females of O. nezarae are attracted to (E)‐2‐hexenyl (Z)‐3‐hexenoate (EZ), one of the components of aggregation pheromone of R. pedestris. Effects of three isomers (ZE, EE and ZZ) of EZ on the attractiveness of O. nezarae were tested using electroantennography (EAG) and field bioassays. EAG analyses revealed that the response of O. nezarae to ZE was significantly higher than those to air, hexane and two other isomers, even though the response was lower than that to EZ. ZE affected the attractiveness of EZ dose‐dependently in the field. Addition of ZE (100 mg) to EZ (10 mg) caused a significant reduction in the catches of O. nezarae females. Single or binary addition of two other isomers (EE and ZZ) to EZ could not decrease or increase significantly the number of O. nezarae catches of EZ. Even though addition of ZZ (10, 50 or 100 mg) to EZ (10 mg) caused dose‐dependent reduction in the number of O. nezarae female catches, the reductions were not significantly different from that of EZ. EZ and its three isomers were not attractive to O. nezarae males at all.     

Asymmetric Borane Reduction of Prochiral Ketones Catalyzed By Helical Poly[(S)‐3‐vinyl‐2,2'‐dihydroxy‐1,1'‐binaphthyl]

The application of helical poly[(S)‐3‐vinyl‐2,2'‐dihydroxy‐1, 1'‐binaphthyl] ( L* ) in the asymmetric borane reduction of prochiral ketones was studied. The results showed that L* had excellent catalytic activity as well as enantioselectivity, giving up to 96% yield and up to 99% enantiomeric excess (ee) of the corresponding secondary alcohol at 25 °C. Moreover, L* can be easily recovered and reused without loss of catalytic activity. Chirality 27:422–424, 2015. © 2015 Wiley Periodicals, Inc.     

Production of (R)‐1‐(1,3‐benzodioxol‐5‐yl)ethanol in high enantiomeric purity by Lactobacillus paracasei BD101

Piperonyl ring is found in a number of naturally occurring compounds and possesses enormous biological activities. There are many studies in the literature with compounds containing a piperonyl ring, but there are very few studies on the synthesis of chiral piperonyl carbinol. The objective of this study was to determine the microbial reduction ability of bacterial strains and to reveal the effects of different physicochemical parameters on this reduction ability. A total of 15 bacterial isolates were screened for their ability to reduce 1‐(benzo[d][1,3]dioxol‐5‐yl) ethanone 1 to its corresponding alcohol. Among these isolates Lactobacillus paracasei BD101 was found to be the most successful biocatalyst to reduce the ketone containing piperonyl ring to the corresponding alcohol. The reaction conditions were systematically optimized for the reducing agent L paracasei BD101, which showed high enantioselectivity and conversion for the bioreduction. The preparative scale study was performed, and a total of 3.72 g of (R)‐1‐(1,3‐benzodioxol‐5‐yl) ethanol in high enantiomeric form (>99% enantiomeric excess) was produced in a mild, cheap, and environment‐friendly process. This study demonstrates that L paracasei BD101 can be used as a biocatalyst to obtain chiral carbinol with excellent yield and selectivity.     

Solar‐Light‐Driven CO2 Reduction by CH4 on Silica‐Cluster‐Modified Ni Nanocrystals with a High Solar‐to‐Fuel Efficiency and Excellent Durability

Catalytic CO₂ reforming of CH₄ (CRM) to produce syngas (H₂ and CO) provides a promising approach to reducing global CO₂ emissions and the extensive utilization of natural gas resources. However, the rapid deactivation of the reported catalysts due to severe carbon deposition at high reaction temperatures and the large energy consumption of the process hinder its industrial application. Here, a method for almost completely preventing carbon deposition is reported by modifying the surface of Ni nanocrystals with silica clusters. The obtained catalyst exhibits excellent durability for CRM with almost no carbon deposition and deactivation after reaction for 700 h. Very importantly, it is found that CRM on the catalyst can be driven by focused solar light, thus providing a promising new approach to the conversion of renewable solar energy to fuel due to the highly endothermic characteristics of CRM. The reaction yields high production rates of H₂ and CO (17.1 and 19.9 mmol min^?1 g^?1, respectively) with a very high solar‐to‐fuel efficiency (η, 12.5%). Even under focused IR irradiation with a wavelength above 830 nm, the η of the catalyst remains as high as 3.1%. The highly efficient catalytic activity arises from the efficient solar‐light‐driven thermocatalytic CRM enhanced by a novel photoactivation effect.     

Preparation of Enantiomerically Pure (S)‐(−)‐1‐(1′‐naphthyl)‐ethanol by the Fungus Alternaria alternata

(S)‐(?)‐1‐(1′‐napthyl)‐ethanol (S‐NE) is an important intermediate for the preparation of mevinic acid analogs, which is used for the treatment of hyperlipidemia. The objectives of the study were to isolate a microorganism that could effectively reduce 1‐acetonaphthone (1‐ACN) to S‐NE, to determine the influence that the physicochemical parameters would have on the reduction by the isolated microorganism, and to attempt large‐scale studies with the microorganism. Over the years fungi have been considered a promising biocatalyst and it has been presumed that many fungal species have not been isolated and therefore the current study focused on possible isolation of these microorganisms. A total of 72 fungal isolates were screened for their ability to reduce 1‐ACN to its corresponding alcohol. The isolate, EBK‐62, identified as Alternaria alternata, was found to be the most successful at reducing the ketone to the corresponding alcohol in the submerged culture. The reaction conditions were systematically optimized for the reducing agent A. alternata EBK‐62, which showed high stereospecificity and good conversion for the reduction. The preparative scale study was carried out in a 2 L bioreactor and a total of 4.9 g of S‐NE in optically pure form (>99% enantiomeric excess) was produced in 48 h. Chirality 28:669–673, 2016. © 2016 Wiley Periodicals, Inc.     

β‐Hydroxyamide‐Based Ligands and Their Use in the Enantioselective Borane Reduction of Prochiral Ketones

Hydroxyamide‐based ligands have occupied a considerable place in asymmetric synthesis. Here we report the synthesis of seven β‐hydroxyamide‐based ligands from the reaction of 2‐hydroxynicotinic acid with chiral amino alcohols and test their effect on the enantioselective reduction of aromatic prochiral ketones with borane in tetrahydofuran (THF). They produce the corresponding secondary alcohols with up to 76% enantiomeric excess (ee) and good to excellent yields (86‐99%). Chirality 26:21–26, 2013. © 2013 Wiley Periodicals, Inc.     

Overpotentials and Faraday Efficiencies in CO2 Electrocatalysis–the Impact of 1‐Ethyl‐3‐Methylimidazolium Trifluoromethanesulfonate

The mixtures of room temperature ionic liquid 1‐ethyl‐3‐methylimidazolium trifluoromethanesulfonate ([EMIM]TFO) and water as electrolytes for reduction of CO₂ to CO are reported. Linear sweep voltammetry shows overpotentials for CO₂ reduction and the competing hydrogen evolution reaction (HER), both of which vary as a function of [EMIM]TFO concentration in the range from 4 × 10^?3m (0.006 mol%) to 4869 × 10^?3m (50 mol%). A steady lowering of overpotentials up to an optimum for 334 × 10?³m is identified. At 20 mol% and more of [EMIM]TFO, a significant CO₂ reduction plateau and inhibition of HER, which is limited by H₂O diffusion, is noted. Such a plateau in CO₂ reduction correlates to high CO Faraday efficiencies. In case of 50 mol% [EMIM]TFO, a broad plateau spanning over a potential range of 0.58 V evolves. At the same time, the overpotential for HER is increased by 1.20 V when compared to 334 × 10^?3m and, in turn, HER is largely inhibited. The Faraday efficiencies for CO and H₂ formation feature 95.6% ± 6.8% and 0.5% ± 0.3%, respectively, over a period of 3 h in a separator divided cell. Cathodic as well as anodic electrochemical stability of the electrolyte throughout this time period is corroborated in ¹H NMR spectroscopic measurements.     

Metal‐Organic Framework‐Derived Non‐Precious Metal Nanocatalysts for Oxygen Reduction Reaction

By virtue of diverse structures and tunable properties, metal‐organic frameworks (MOFs) have presented extensive applications including gas capture, energy storage, and catalysis. Recently, synthesis of MOFs and their derived nanomaterials provide an opportunity to obtain competent oxygen reduction reaction (ORR) electrocatalysts due to their large surface area, controllable composition and pore structure. This review starts with the introduction of MOFs and current challenges of ORR, followed by the discussion of MOF‐based non‐precious metal nanocatalysts (metal‐free and metal/metal oxide‐based carbonaceous materials) and their application in ORR electrocatalysis. Current issues in MOF‐derived ORR catalysts and some corresponding strategies in terms of composition and morphology to enhance their electrocatalytic performance are highlighted. In the last section, a perspective for future development of MOFs and their derivatives as catalysts for ORR is discussed.     

Axially chiral N‐(o‐aryl)‐4‐hydroxy‐2‐oxazolidinone derivatives from diastereoselective reduction of N‐(o‐aryl)‐2,4‐oxazolidinediones: Thermally interconvertible atropisomers via ring‐chain‐ring tautomerization

The reduction of the axially chiral N‐(o‐aryl)‐5,5‐dimethyl‐2,4‐oxazolidinediones by NaBH₄ yielded axially chiral N‐(o‐aryl)‐4‐hydroxy‐5,5‐dimethyl‐2‐oxazolidinone enantiomers having a chiral center at C‐4, with 100% diastereoselectivity as has been shown by their ¹H and ¹³C NMR spectra and by enantioselective HPLC analysis. The resolved enantiomeric isomers were found to interconvert thermally through an aldehyde intermediate formed upon ring cleavage via a latent ring‐chain‐ring tautomerization. It was found that the rate of enantiomerization depended on the size and the electronic effect of the ortho substituent present on the aryl ring bonded to the nitrogen of the heterocycle. Chirality 2010. © 2009 Wiley‐Liss, Inc.     

Extremely High Yield Conversion from Low‐Cost Sand to High‐Capacity Si Electrodes for Li‐Ion Batteries

Although magnesiothermic reduction has attracted immense attention as a facile route for the fabrication of mass‐scale Si nanostructures for high‐capacity lithium‐ion battery applications, its low conversion yield (<50%) and the discovery of a sustainable and low‐cost precursor remain challenging. Here, an unprecedentedly high final conversion yield (>98%) of magnesiothermic reduction based on control of reaction pressure is reported. The successful use of sand as a nearly infinite and extremely low‐cost source for the high‐yield fabrication of nanostructured Si electrodes for Li‐ion batteries is demonstrated. On the basis of a step‐by‐step analysis of the material's structural, morphological, and compositional changes, a two‐step conversion reaction mechanism is proposed that can clearly explain the phase behavior and the high conversion yield. The excellent charge–discharge performance (specific capacities over 1500 mAh g^‐1 for 100 cycles) of the hierarchical Si nanostructure suggests that this facile, fast, and high‐efficiency synthesis strategy from ultralow‐cost sand particles provides outstanding cost‐effectiveness and possible scalability for the commercialization of Si electrodes for energy‐storage applications.     

Metal Halide Perovskites for Solar‐to‐Chemical Fuel Conversion

This review article presents and discusses the recent progress made in the stabilization, protection, improvement, and design of halide perovskite‐based photocatalysts, photoelectrodes, and devices for solar‐to‐chemical fuel conversion. With the target of water splitting, hydrogen iodide splitting, and CO₂ reduction reactions, the strategies established for halide perovskites used in photocatalytic particle‐suspension systems, photoelectrode thin‐film systems, and photovoltaic‐(photo)electrocatalysis tandem systems are organized and introduced. Moreover, recent achievements in discovering new and stable halide perovskite materials, developing protective and functional shells and layers, designing proper reaction solution systems, and tandem device configurations are emphasized and discussed. Perspectives on the future design of halide perovskite materials and devices for solar‐to‐chemical fuel conversion are provided. This review may serve as a guide for researchers interested in utilizing halide perovskite materials for solar‐to‐chemical fuel conversion.     

A comparative analysis of the post‐cranial skeleton of fossorial and non‐fossorial gymnophthalmid lizards

Squamates are found in a wide range of habitats and show a corresponding diversity of morphologies that can often be correlated with locomotor mode. The evolution of a snake‐like body form, frequently associated with fossoriality, from a typical lacertiform morphology involves changes in the morphology of vertebrae, girdles, and limbs; the changes are mainly manifested by the reduction or loss of limbs and body elongation. In this study, we describe the axial and appendicular skeletons of six closely related gymnophthalmid species. Three of them show a lizard‐like morphology, with a four‐digit forelimb and a five‐digit hindlimb, and the other three show a snake‐like morphology associated with a burrowing habit, with reduced limbs and a longer body in comparison to the former three species. We show that vertebral morphology is similar among the six species, with the differences being accounted for by an increase in the number of vertebrae and by the structural reduction of girdles and limbs in the snake‐like species. Skeletal morphology provides valuable information on locomotion type, physiology, diet, and other biological features. The burrowing morphology usually involves accentuated reduction of girdle and limb elements, reflecting an undulating type of locomotion in which the limbs play little or no role in propelling the body; in contrast, well‐developed limbs and girdles indicate a greater reliance on the limbs for body propulsion. Limb reduction is frequent among vertebrates, but many different phenotypes are found in species exhibiting some kind of reduction, indicating that different mechanisms and evolutionary pressures may be involved in generating the diverse morphologies. J. Morphol. 274:845–858, 2013. © 2013 Wiley Periodicals, Inc.     

Electrochemical CO2 Reduction with Atomic Iron‐Dispersed on Nitrogen‐Doped Graphene

Electrochemical reduction of CO₂ provides an opportunity to reach a carbon‐neutral energy recycling regime, in which CO₂ emissions from fuel use are collected and converted back to fuels. The reduction of CO₂ to CO is the first step toward the synthesis of more complex carbon‐based fuels and chemicals. Therefore, understanding this step is crucial for the development of high‐performance electrocatalyst for CO₂ conversion to higher order products such as hydrocarbons. Here, atomic iron dispersed on nitrogen‐doped graphene (Fe/NG) is synthesized as an efficient electrocatalyst for CO₂ reduction to CO. Fe/NG has a low reduction overpotential with high Faradic efficiency up to 80%. The existence of nitrogen‐confined atomic Fe moieties on the nitrogen‐doped graphene layer is confirmed by aberration‐corrected high‐angle annular dark‐field scanning transmission electron microscopy and X‐ray absorption fine structure analysis. The Fe/NG catalysts provide an ideal platform for comparative studies of the effect of the catalytic center on the electrocatalytic performance. The CO₂ reduction reaction mechanism on atomic Fe surrounded by four N atoms (Fe–N₄) embedded in nitrogen‐doped graphene is further investigated through density functional theory calculations, revealing a possible promotional effect of nitrogen doping on graphene.     

Alveoli‐Inspired Facile Transport Structure of N‐Doped Porous Carbon for Electrochemical Energy Applications

Heteroatom‐doped porous carbon materials have attracted much attention because of their extensive application in energy conversion and storage devices. Because the performance of fuel cells and the rate capability of supercapacitors depend significantly on multiple factors, such as electrical conductivity and transport rate of ions and reactants, designing these carbon‐based materials to optimize performance factors is vital. In order to address these issues, alveoli that possess a hollow cavity where oxygen exchange can occur are synthesized, inspired by N‐doped carbon materials with a high surface area and low transport resistance. By incorporating a dopamine coating on zeolitic imidazolate framework (ZIF), pore size is modified and electrical conducting pathways are constructed, resulting in changes to the reaction kinetics. These highly interconnected electron connection channels and proper pore sizes facilitate the diffusion of reactants and the conduction of electrons, leading to high activity of the oxygen reduction reaction (ORR), which is comparable to Pt, and high rate performance in supercapacitors.     

Minimally invasive non‐thermal laser technology using laser‐induced optical breakdown for skin rejuvenation

We describe a novel, minimally invasive laser technology for skin rejuvenation by creating isolated microscopic lesions within tissue below the epidermis using laser induced optical breakdown. Using an in‐house built prototype device, tightly focused near‐infrared laser pulses are used to create optical breakdown in the dermis while leaving the epidermis intact, resulting in lesions due to cavitation and plasma explosion. This stimulates a healing response and consequently skin remodelling, resulting in skin rejuvenation effects. Analysis of ex‐vivo and in‐vivo treated human skin samples successfully demonstrated the safety and effectiveness of the microscopic lesion creation inside the dermis. Treatments led to mild side effects that can be controlled by small optimizations of the optical skin contact and treatment depth within the skin. The histological results from a limited panel test performed on five test volunteers show evidence of microscopic lesion creation and new collagen formation at the sites of the optical breakdown. This potentially introduces a safe, breakthrough treatment procedure for skin rejuvenation without damaging the epidermis with no or little social down‐time and with efficacy comparable to conventional fractional ablative techniques. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Crystal structure of human multiple copies in T‐cell lymphoma‐1 oncoprotein

Overexpression of multiple copies in T‐cell lymphoma‐1 (MCT‐1) oncogene accompanies malignant phenotypic changes in human lymphoma cells. Specific disruption of MCT‐1 results in reduced tumorigenesis, suggesting a potential for MCT‐1‐targeted therapeutic strategy. MCT‐1 is known as a cap‐binding protein and has a putative RNA‐binding motif, the PUA‐domain, at its C‐terminus. We determined the crystal structure of apo MCT‐1 at 1.7 Å resolution using the surface entropy reduction method. Notwithstanding limited sequence identity to its homologs, the C‐terminus of MCT‐1 adopted a typical PUA‐domain fold that includes secondary structural elements essential for RNA recognition. The surface of the N‐terminal domain contained positively charged patches that are predicted to contribute to RNA‐binding. Proteins 2013. © 2012 Wiley Periodicals, Inc.     

Atomic Fe‐Doped MOF‐Derived Carbon Polyhedrons with High Active‐Center Density and Ultra‐High Performance toward PEM Fuel Cells

A metalorganic gaseous doping approach for constructing nitrogen‐doped carbon polyhedron catalysts embedded with single Fe atoms is reported. The resulting catalysts are characterized using scanning transmission electron microscopy, X‐ray photoelectron spectroscopy, and X‐ray absorption spectroscopy; for the optimal sample, calculated densities of Fe–N_x sites and active N sites reach 1.75812 × 10¹³ and 1.93693 × 10¹⁴ sites cm^‐2, respectively. Its oxygen reduction reaction half‐wave potential (0.864 V) is 50 mV higher than that of 20 wt% Pt/C catalyst in an alkaline medium and comparable to the latter (0.78 V vs 0.84 V) in an acidic medium, along with outstanding durability. More importantly, when used as a hydrogen–oxygen polymer electrolyte membrane fuel cell (PEMFC) cathode catalyst with a catalyst loading as low as 1 mg cm^‐2 (compared with a conventional loading of 4 mg cm^‐2), it exhibits a current density of 1100 mA cm^‐2 at 0.6 V and 637 mA cm^‐2 at 0.7 V, with a power density of 775 mW cm^‐2, or 0.775 kW g^–1 of catalyst. In a hydrogen–air PEMFC, current density reaches 650 mA cm^‐2 at 0.6 V and 350 mA cm^‐2 at 0.7 V, and the maximum power density is 463 mW cm^‐2, which makes it a promising candidate for cathode catalyst toward high‐performance PEMFCs.     

Alkaline Polymer Membrane‐Based Ultrathin,Flexible, and High‐Performance Solid‐State Zn‐Air Battery

The increasing demand for portable and wearable electronics requires lightweight, thin, and highly flexible power sources, for example, flexible zinc‐air batteries (ZABs). The so‐far reported flexible ZAB devices mostly remain bulky, with a design consisting of two relatively thick substrates (e.g., carbon cloths and/or metal foams) and a gel electrolyte‐coated separator in between. Herein, an ultrathin (≈0.2 mm) solid‐state ZAB with high flexibility and performance is introduced by directly forming self‐standing active layers on each surface of an alkaline polymer membrane through an ink‐casting/hot‐pressing approach. A Fe/N‐doped 3D carbon with hierarchic pores and an interconnected network structure is used as cathode electrocatalyst, so that the backing gas‐diffusion layer (e.g., carbon cloth) can be abandoned. What is further, a microstructure‐modulating method to significantly increase the FeN₄ active sites for oxygen reduction reaction is developed, thus significantly boosting the performance of the ZAB. The assembled solid‐state ZAB manifests remarkable peak power density of 250 mW cm^?3 and high capacity of 150.4 mAh cm^?3 at 8.3 mA cm^?3, as well as excellent flexibility. The new design should provide valuable opportunity to the portable and wearable electronics.