Sequential assembly and polymerization of the polyprenol-linked pentasaccharide repeating unit of the xanthan polysaccharide in Xanthomonas campestris.

Lipid-linked intermediates are involved in the synthesis of the exopolysaccharide xanthan produced by the bacterium Xanthomonas campestris (L. Ielpi, R. O. Couso, and M. A. Dankert, FEBS Lett. 130:253-256, 1981). In this study, the stepwise assembly of the repeating pentasaccharide unit of xanthan is described. EDTA-treated X. campestris cells were used as both enzyme preparation and lipid-P acceptor, and UDP-Glc, GDP-Man, and UDP-glucuronic acid were used as sugar donors. A linear pentasaccharide unit is assembled on a polyprenol-P lipid carrier by the sequential addition of glucose-1-P, glucose, mannose, glucuronic acid, and mannose. The in vitro synthesis of pentasaccharide-P-P-polyprenol was also accompanied by the incorporation of radioactivity into a polymeric product, which was characterized as xanthan, on the basis of gel filtration and permethylation studies. Results from two-stage reactions showed that essentially pentasaccharide-P-P-polyprenol is polymerized. In addition, the direction of chain elongation has been studied by in vivo experiments. The polymerization of lipid-linked repeat units occurs by the successive transfer of the growing chain to a new pentasaccharide-P-P-polyprenol. The reaction involves C-1 of glucose at the reducing end of the polyprenol-linked growing chain and C-4 of glucose at the nonreducing position of the newly formed polyprenol-linked pentasaccharide, generating a branched polymer with a trisaccharide side chain.     

Genetic and physical analyses of a cluster of genes essential for xanthan gum biosynthesis in Xanthomonas campestris.

Xanthomonas campestris produces copious amounts of a complex exopolysaccharide, xanthan gum. Nonmucoid mutants, defective in synthesis of xanthan polysaccharide, were isolated after nitrosoguanidine mutagenesis. To isolate genes essential for xanthan polysaccharide synthesis (xps), a genomic library of X. campestris DNA, partially digested with SalI and ligated into the broad-host-range cloning vector pRK293, was constructed in Escherichia coli. The pooled clone bank was conjugated en masse from E. coli into three nonmucoid mutants by using pRK2013, which provides plasmid transfer functions. Kanamycin-resistant exconjugants were then screened for the ability to form mucoid colonies. Analysis of plasmids from several mucoid exconjugants indicated that overlapping segments of DNA had been cloned. These plasmids were tested for complementation of eight additional nonmucoid mutants. A 22-kilobase (kb) region of DNA was defined physically by restriction enzyme analysis and genetically by ability to restore mucoid phenotype to 10 of the 11 nonmucoid mutants tested. This region was further defined by subcloning and by transposon mutagenesis with mini-Mu(Tetr), with subsequent analysis of genetic complementation of nonmucoid mutants. A region of 13.5 kb of DNA was determined to contain at least five complementation groups. The effect of plasmids containing cloned xps genes on xanthan gum synthesis was evaluated. One plasmid, pCHC3, containing a 12.4-kb insert and at least four linked xanthan biosynthetic genes, increased the production of xanthan gum by 10% and increased the extent of pyruvylation of the xanthan side chains by about 45%. This indicates that a gene affecting pyruvylation of xanthan gum is linked to this cluster of xps genes.     

Location and cloning of the ketal pyruvate transferase gene of Xanthomonas campestris.

Genes required for xanthan polysaccharide synthesis (xps) are clustered in a DNA region of 13.5 kb in the chromosome of Xanthomonas campestris. Plasmid pCHC3 containing a 12.4-kb insert of xps genes has been suggested to include a gene involved in the pyruvylation of xanthan gum (N.E. Harding, J.M. Cleary, D.K. Caba?as, I. G. Rosen, and K. S. Kang, J. Bacteriol. 169:2854-2861, 1987). An essential step toward understanding the biosynthesis of xanthan gum and to enable genetic manipulation of xanthan structure is the determination of the biochemical function encoded by the xps genes. On the basis of biochemical characterization of an X. campestris mutant which produces pyruvate-free xanthan gum, complementation studies, and heterologous expression, we have identified the gene coding for the ketal pyruvate transferase (kpt) enzyme. This gene was located on a 1.4-kb BamHI fragment of pCHC3 and cloned in the broad-host-range cloning vector pRK404. An X. campestris kpt mutant was constructed by mini-Mu(Tetr) mutagenesis of the cloned gene and then by recombination of the mutation into the chromosome of the wild-type strain.     

A facile regio- and stereoselective synthesis of mannose octasaccharide of the N-glycan in human CD2 and mannose hexasaccharide antigenic factor 13b

A highly concise and effective synthesis of the mannose octasaccharide of the N-linked glycan in the adhesion domain of human CD2 was achieved via TMSOTf-promoted selective 6-glycosylation of a trisaccharide 4,6-diol acceptor with a pentasaccharide donor, followed by deprotection. The pentasaccharide was constructed by selective 3,6-diglycosylation of 1,2-O-ethylidene-beta-D-mannopyranose with 2-O-acetyl-3,4,6-tri-O-benzoyl-alpha-D-mannopyranosyl-(1-->2)-3,4,6-tri-O-benzoyl-alpha-D-mannopyranosyl trichloroacetimidate, while the trisaccharide was obtained by selective 3-O-glycosylation of allyl 4,6-O-benzylidene-alpha-D-mannopyranoside with the same disaccharide trichloroacetimidate, followed by debenzylidenation. The mannose hexasaccharide antigenic factor 13b was synthesized by condensation of a trisaccharide donor, 2-O-acetyl-3,4,6-tri-O-benzoyl-alpha-D-mannopyranosyl-(1-->2)-3,4,6-tri-O-benzoyl-alpha-D-mannopyranosyl-(1-->3)-4,6-di-O-acetyl-2-O-benzoyl-alpha-D-mannopyranosyl trichloroacetimidate, with a trisaccharide acceptor, methyl 3,4,6-tri-O-benzoyl-alpha-D-mannopyranosyl-(1-->2)-3,4,6-tri-O-benzoyl-alpha-D-mannopyranosyl-(1-->2)-3,4,6-tri-O-benzoyl-alpha-D-mannopyranoside, followed by deprotection.     

Microbial system for polysaccharide depolymerization: enzymatic route for xanthan depolymerization by Bacillus sp. strain GL1.

An enzymatic route for the depolymerization of a heteropolysaccharide (xanthan) in Bacillus sp. strain GL1, which was closely related to Brevibacillus thermoruber, was determined by analyzing the structures of xanthan depolymerization products. The bacterium produces extracellular xanthan lyase catalyzing the cleavage of the glycosidic bond between pyruvylated mannosyl and glucuronyl residues in xanthan side chains (W. Hashimoto et al., Appl. Environ. Microbiol. 64:3765-3768, 1998). The modified xanthan after the lyase reaction was then depolymerized by extracellular beta-D-glucanase to a tetrasaccharide, without the terminal mannosyl residue of the side chain in a pentasaccharide, a repeating unit of xanthan. The tetrasaccharide was taken into cells and converted to a trisaccharide (unsaturated glucuronyl-acetylated mannosyl-glucose) by beta-D-glucosidase. The trisaccharide was then converted to the unsaturated glucuronic acid and a disaccharide (mannosyl-glucose) by unsaturated glucuronyl hydrolase. Finally, the disaccharide was hydrolyzed to mannose and glucose by alpha-D-mannosidase. This is the first complete report on xanthan depolymerization by bacteria. Novel beta-D-glucanase, one of the five enzymes involved in the depolymerization route, was purified from the culture fluid. This enzyme was a homodimer with a subunit molecular mass of 173 kDa and was most active at pH 6.0 and 45 degrees C. The enzyme specifically acted on xanthan after treatment with xanthan lyase and released the tetrasaccharide.     

Polymer-supported and chemoenzymatic synthesis of the Neisseria meningitidis pentasaccharide: a methodological comparison

Neisseria meningitidis trisaccharide [GlcNAc[(1-->3)Galbeta(1-->4)Glc-R], tetrasaccharide [Galbeta(1-->4)GlcNAcbeta(1--> 3)Galbeta(1-->4)Glc-R], and a pentasaccharide [Neu5Acalpha(2-->3)Galbeta(1-->4)GlcNAcbeta(1-->3)G albeta(1-->4)Glc-SPh] were prepared via conventional chemical synthesis, polymer-supported synthesis, and chemoenzymatic methods, starting from D-lactose. The polymer polyethyleneglycol monomethylether (MPEG) and the linker dioxyxylene (DOX) were used with a lactose-bound acceptor to improve the purification process. Several enzymes (LgtA, GalE-LgtB fusion, and CMP-Neu5Ac synthetase/sialyltransferase fusion) were used for syntheses of these oligosaccharides. Excellent stereo- and regioselectivities as well as high yield (> 90% from Gal(1-->4)Glc-SPh) of the pentasaccharide were obtained. Both of the convenient processes are suitable for efficient preparation of target oligosaccharides.     

Molecular recognition of oligosaccharide epitopes by a monoclonal Fab specific for Shigella flexneri Y lipopolysaccharide: X-ray structures and thermodynamics

The antigenic recognition of Shigella flexneri O-polysaccharide, which consists of a repeating unit ABCD [-->2)-alpha-L-Rhap-(1-->2)-alpha-L-Rhap-(1-->3)-alpha-L-Rhap-(1-->3)-beta-D-GlcpNAc-(1-->], by the monoclonal antibody SYA/J6 (IgG3, kappa) has been investigated by crystallographic analysis of the Fab domain and its two complexes with two antigen segments (a pentasaccharide Rha A-Rha B-Rha C-GlcNAc D-Rha A' and a modified trisaccharide Rha B-Rha C-GlcNAc D in which Rha C* is missing a C2-OH group). These complex structures, the first for a Fab specific for a periodic linear heteropolysaccharide, reveal a binding site groove (between the V(H) and V(L) domains) that makes polar and nonpolar contacts with all the sugar residues of the pentasaccharide. Both main-chain and side-chain atoms of the Fab are used in ligand binding. The charged side chain of Glu H50 of CDR H2 forms crucial hydrogen bonds to GlcNAc of the oligosaccharides. The modified trisaccharide is more buried and fits more snugly than the pentasaccharide. It also makes as many contacts (approximately 75) with the Fab as the pentasaccharide, including the same number of hydrogen bonds (eight, with four being identical). It is further engaged in more hydrophobic interactions than the pentasaccharide. These three features favorable to trisaccharide binding are consistent with the observation of a tighter complex with the trisaccharide than the pentasaccharide. Thermodynamic data demonstrate that the native tri- to pentasaccharides have free energies of binding in the range of 6.8-7.4 kcal mol(-1), and all but one of the hydrogen bonds to individual hydroxyl groups provide no more than approximately 0.7 kcal mol(-1). They further indicate that hydrophobic interactions make significant contributions to binding and, as the native epitope becomes larger across the tri-, tetra-, pentasaccharide series, entropy contributions to the free energy become dominant.     

Mechanism of action of the endo-(1-->3)-alpha-glucanase MutAp from the mycoparasitic fungus Trichoderma harzianum

(1-->3)-alpha-glucanases catalyze the hydrolysis of fungal cell wall (1-->3)-alpha-glucan, and function during cell division of yeasts containing this cell wall component or act in mycoparasitic processes. Here, we characterize the mechanism of action of the (1-->3)-alpha-glucanase MutAp from the mycoparasitic fungus Trichoderma harzianum. We observed that MutAp releases predominantly beta-glucose upon hydrolysis of crystalline (1-->3)-alpha-glucan, indicating inversion of the anomeric configuration. After having identified (1-->3)-alpha-glucan tetrasaccharide as the minimal substrate for MutAp, we showed that reduced (1-->3)-alpha-glucan pentasaccharide is cleaved into a trisaccharide and a reduced disaccharide, demonstrating that MutAp displays endo-hydrolytic activity. We propose a model for the catalytic mechanism of MutAp, whereby the enzyme breaks an intrachain glycosidic linkage of (1-->3)-alpha-glucan, and then continues its hydrolysis towards the non-reducing end by releasing beta-glucose residues in a processive manner.     

Exopolygalacturonate lyase from Thermotoga maritima: cloning,characterization and organic synthesis application

A new exopolygalacturonate lyase (Pel) gene of the hyperthermophilic bacterium Thermotoga maritima was cloned and overexpressed in Escherichia coli cells. A 42 kDa monomeric Pel was shown to undergo N-terminal processing by cleavage at a putative site between alanine and serine residues. The enzyme catalyzes selectively a beta-4,5 elimination at the third galacturonic unit from the reducing end of polygalacturonic acid by producing (4-deoxy-alpha-L-threo-hex-4-enopyranosyluronic acid)-(1-->4)-(alpha-D-galactopyranosyluronic acid)-(1-->4)-alpha-D-galactopyranuronic acid (3) with a 60% yield. The optimum activity of the enzyme was detected at pH 9.5 and T> or=95 degrees C. The highly thermostable enzyme constitutes a useful catalyst for a simplified synthesis of 4,5-unsaturated trigalacturonic acid 3, a trisaccharide which is extremely difficult to obtain via chemical synthesis.     

Oligosaccharide preferences of beta1,4-galactosyltransferase-I: crystal structures of Met340His mutant of human beta1,4-galactosyltransferase-I with a pentasaccharide and trisaccharides of the N-glycan moiety

beta-1,4-Galactosyltransferase-I (beta4Gal-T1) transfers galactose from UDP-galactose to N-acetylglucosamine (GlcNAc) residues of the branched N-linked oligosaccharide chains of glycoproteins. In an N-linked biantennary oligosaccharide chain, one antenna is attached to the 3-hydroxyl-(1,3-arm), and the other to the 6-hydroxyl-(1,6-arm) group of mannose, which is beta-1,4-linked to an N-linked chitobiose, attached to the aspargine residue of a protein. For a better understanding of the branch specificity of beta4Gal-T1 towards the GlcNAc residues of N-glycans, we have carried out kinetic and crystallographic studies with the wild-type human beta4Gal-T1 (h-beta4Gal-T1) and the mutant Met340His-beta4Gal-T1 (h-M340H-beta4Gal-T1) in complex with a GlcNAc-containing pentasaccharide and several GlcNAc-containing trisaccharides present in N-glycans. The oligosaccharides used were: pentasaccharide GlcNAcbeta1,2-Manalpha1,6 (GlcNAcbeta1,2-Manalpha1,3)Man; the 1,6-arm trisaccharide, GlcNAcbeta1,2-Manalpha1,6-Manbeta-OR (1,2-1,6-arm); the 1,3-arm trisaccharides, GlcNAcbeta1,2-Manalpha1,3-Manbeta-OR (1,2-1,3-arm) and GlcNAcbeta1,4-Manalpha1,3-Manbeta-OR (1,4-1,3-arm); and the trisaccharide GlcNAcbeta1,4-GlcNAcbeta1,4-GlcNAc (chitotriose). With the wild-type h-beta4Gal-T1, the K(m) of 1,2-1,6-arm is approximately tenfold lower than for 1,2-1,3-arm and 1,4-1,3-arm, and 22-fold lower than for chitotriose. Crystal structures of h-M340H-beta4Gal-T1 in complex with the pentasaccharide and various trisaccharides at 1.9-2.0A resolution showed that beta4Gal-T1 is in a closed conformation with the oligosaccharide bound to the enzyme, and the 1,2-1,6-arm trisaccharide makes the maximum number of interactions with the enzyme, which is in concurrence with the lowest K(m) for the trisaccharide. Present studies suggest that beta4Gal-T1 interacts preferentially with the 1,2-1,6-arm trisaccharide rather than with the 1,2-1,3-arm or 1,4-1,3-arm of a bi- or tri-antennary oligosaccharide chain of N-glycan.     

Synthesis of an alpha-linked dimer of the trisaccharide repeating unit of the exopolysaccharide produced by Pediococcus damnosus 2.6

A hexasaccharide, beta-D-Glcp-(1-->3)-[beta-D-Glcp-(1-->2)]-alpha-D-Glcp-(1-->3)-beta-D-Glcp-(1-->3)-[beta-D-Glcp-(1-->2)]-D-Glcp, the alpha-linked dimer of the trisaccharide repeating unit of the exopolysaccharide produced by Pediococcus damnosus 2.6, was synthesized as its methyl glycoside. Condensation of fully benzoylated alpha-D-glucopyranosyl trichloroacetimidate (1) with isopropyl 4,6-O-benzylidene-1-thio-beta-D-glucopyranoside (2) selectively furnished (1-->3)-linked disaccharide 3, and subsequent 2-O-acetylation, desulfation, and trichloroacetimidate formation afforded the disaccharide donor 6. Meanwhile, selective 3-O-coupling of methyl 4,6-O-benzylidene-alpha-d-glucopyranoside (8) with 3-O-allyl-2,4,6-tri-O-benzoyl-alpha-D-glucopyranosyl trichloroacetimidate (7), followed by coupling with 1 gave the trisaccharide 10. Removal of the benzylidene group of 10, benzoylation, and deallylation produced the trisaccharide acceptor 12. Condensation of 12 with 6 yielded a pentasaccharide mixture 13 with beta and alpha isomers in a ratio of 2:1. Removal of the benzylidene group of 13, followed by benzoylation gave the pentasaccharide mixture 14. Selective 2'-deacetylation of the isolated beta-linked 14beta with MeCOCl/MeOH/CH2Cl2 did not give the expected pentasaccharide acceptor, and serious decomposition occurred, indicating a large steric hindrance at C-2'. Alternatively, 2,3-di-O-glycosylation of allyl 4,6-O-benzylidene-beta-D-glucopyranoside (21) with 1 gave 22, then deallylation and trichloroacetimidate formation afforded the trisaccharide donor 24. Condensation of 12 with 24 furnished only the alpha-linked hexasaccharide 25, and its deprotection gave the free hexaoside 27.     

Synthesis of heparin partial structures and their binding activities to platelets

A synthetic pentasaccharide corresponding to the antithrombin III-binding region in heparin was also found to bind to human platelets. To identify the platelet-binding site in the pentasaccharide which is expected to be a novel sequence in heparin responsible for its platelet-binding, five partial structures of this particular pentasaccharide were synthesized. In a competitive assay using [3H]-heparin, a trisaccharide, O-(2-deoxy-2-sulfamido-3,6-di-O-sulfo-alpha-D-glucopyranosyl)-1--> 4)-O-(2-O-sulfo-alpha-L-idopyranosyluronic acid)-(1-->4)-2-deoxy-2-sulfamido-6-O-sulfo-alpha-D-glucopyranose, was concluded to be a high-affinity site for heparin's binding to platelets.     

Mutational analysis of the <Emphasis Type="Italic">gum</Emphasis> gene cluster required for xanthan biosynthesis in <Emphasis Type="Italic">Xanthomonas</Emphasis><Emphasis Type="Italic">oryzae</Emphasis> pv <Emphasis Type="Italic">oryzae</Emphasis>

Genome sequence analysis of Xanthomonas oryzae pv. oryzae has revealed a cluster of 12 ORFs that are closely related to the gum gene cluster of Xanthomonas campestris pv. campestris. The gum gene cluster of X. oryzae encodes proteins involved in xanthan production; however, there is little experimental evidence supporting this. In this study, biochemical analyses of xanthan produced by a defined set of X. oryzae gum mutant strains allowed us to preliminarily assign functions to most of the gum gene products: biosynthesis of the pentasaccharide repeating unit for GumD, GumM, GumH, GumK, and GumI, xanthan polymerization and transport for GumB, GumC, GumE, and GumJ, and modification of the pentasaccharide repeating unit for GumF, GumG, and GumL. In addition, we found that the exopolysaccharides are essential but not specific for the virulence of X. oryzae. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users. Sang-Yoon Kim and Jeong-Gu Kim contributed equally to this work.     

Facile synthesis of a pentasaccharide mimic of a fragment of the capsular polysaccharide of Streptococcus pneumoniae type 15C

A pentasaccharide mimic of a fragment of the capsular polysaccharide of Streptococcus pneumoniae type 15C beta-D-Galp-(1-->4)-beta-D-Glcp-(1-->6)-[alpha-D-Galp-(1-->2)-beta-D-Galp-(1-->4)]-beta-D-GlcpNAc-(1-->OCH2CH2N3) (1) was synthesized in a regio- and stereoselective manner. The 2-azidoethyl-spacered pentasaccharide mimic 1 can be used to construct a neoglycoconjugate antigen.     

Clustering of mutations blocking synthesis of xanthan gum by Xanthomonas campestris.

Mutations that block the synthesis of xanthan gum by Xanthomonas campestris B1459S-4L-II were isolated as nonmucoid colonies after treatment with ethyl methanesulfonate. Complete libraries of DNA fragments from wild-type X. campestris were cloned into Escherichia coli by using a broad-host-range cosmid vector and then transferred into each mutant strain by conjugal mating. Cloned fragments that restored xanthan gum synthesis (Xgs+; mucoidy) were compared according to restriction pattern, DNA sequence homology, and complementation of a subset of Xgs- mutations. Groups of clones that contained overlapping homologous DNA were found to complement specific Xgs- mutations. The results suggest clustering of the genetic loci involved in xanthan synthesis. The clustering occurred within three unlinked regions. Two forms of complementation were observed. In most instances, independently isolated cosmid clones that complemented a single mutation were found to be partially homologous. Less frequent was the second form of complementation, in which two cosmid clones that lacked any homologous sequences restored the mucoid phenotype to a single mutant. Finally, xanthan production was measured for wild-type X. campestris carrying multiple plasmid copies of the cloned xanthan genes.     

Synthesis of a heptasaccharide fragment of the O-deacetylated GXM of C. neoformans serotype C

Beta-D-Xylp-(1-->2)-alpha-D-Manp-(1-->3)-[beta-D-Xylp-(1-->2)][beta-D-Xylp-(1-->4)]-alpha-D-Manp-(1-->3)-[beta-D-Xylp-(1-->4)]-alpha-D-Manp, the fragment of the exopolysaccharide from Cryptococcus neoformans serovar C, was synthesized as its methyl glycoside. Thus, chloroacetylation of allyl 3-O-acetyl-4,6-O-benzylidene-alpha-D-mannopyranoside (1) followed by debenzylidenation and selective 6-O-benzoylation afforded allyl 2-O-chloroacetyl-3-O-acetyl-6-O-benzoyl-alpha-D-mannopyranoside (4). Glycosylation of 4 with 2,3,4-tri-O-benzoyl-D-xylopyranosyl trichloroacetimidate (5) furnished the beta-(1-->4)-linked disaccharide 6. Dechloroacetylation gave the disaccharide acceptor 7 and subsequent coupling with 5 produced the trisaccharide 8. Deacetylation of 8 gave the trisaccharide acceptor 9 and subsequent coupling with a disaccharide 10 produced the pentasaccharide 11. Reiteration of deallylation and trichloroacetimidate formation from 11 yielded the pentasaccharide donor 12. Coupling of a disaccharide acceptor 13 with 12 afforded the heptasaccharide 14. Subsequent deprotection gave the heptaoside 16, while selective 2-O-deacetylation of 14 gave the heptasaccharide acceptor 15. Condensation of 15 with glucopyranosyluronate imidate 17 did not yield the expected octaoside, instead, an orthoester product 18 was obtained. Rearrangement of 18 did not give the target octaoside; but produced 15. Meanwhile, there was no reaction between 15 and the glycosyl bromide donor 19.     

Synthesis of galactofuranosyl-containing oligosaccharides corresponding to the glycosylinositolphospholipid of Trypanosoma cruzi

The oligosaccharide beta-D-Galf-(1-->3)-alpha-D-Manp-(1-->2)-[beta-D-Galf- (1-->3)]-alpha-D-Manp-(1-->2)-alpha-D-Manp corresponds to the terminal end of the glycosylinositolphospholipid oligosaccharide of the protozoan Trypanosoma cruzi, the causative agent of Chagas' disease. Syntheses of methyl or ethylthio glycosides of the terminal disaccharide, trisaccharide, tetrasaccharide, and pentasaccharide corresponding to this structure are described. These syntheses employ the selective activation of a phenyl 1-selenogalactofuranoside or a phenyl 1-selenomannopyranoside donor over ethyl 1-thioglycoside acceptors with NIS-TfOH.     

A concise synthesis of two isomeric pentasaccharides, the O repeat units from the lipopolysaccharides of P. syringae pv. porri NCPPB 3364T and NCPPB 3365

A concise synthesis of two isomeric pentasaccharides, alpha-L-Rhap-(1-->2)-alpha-L-Rhap-(1-->3)-alpha-L-Rhap-(1-->3)-[beta-D-GlcpNAc-(1-->2)]-alpha-L-Rhap (A) and alpha-L-Rhap-(1-->2)-alpha-L-Rhap-(1-->3)-[beta-D-GlcpNAc-(1-->2)]-alpha-L-Rhap-(1-->3)-alpha-L-Rhap (B), the O repeats from the lipopolysaccharides of Pseudonomonas syringae pv. porri NCPPB 3364T and 3365 was achieved via assembly of the building blocks, allyl 3,4-di-O-benzoyl-alpha-L-rhamnopyranoside (1), 2,3,4-tri-O-benzoyl-alpha-L-rhamnopyranosyl trichloroacetimidate (2), allyl 4-O-benzoyl-3-O-chloroacetyl-alpha-L-rhamnopyranoside (6), 3,4,6-tri-O-acetyl-2-deoxy-2-phthalimido-beta-D-glucopyranosyl trichloroacetimidate (7), and allyl 2,4-di-O-benzoyl-alpha-L-rhamnopyranoside (10). Coupling of 1 with 2 followed by deallylation and trichloroacetimidate formation gave the disaccharide donor 5, while condensation of 6 with 7, followed by dechloroacetylation, offered the disaccharide acceptor 9. Then, 5 was coupled with 10 to obtain the trisaccharide 11, and subsequent deallylation and trichloroacetimidate formation furnished the trisaccharide donor 13. Coupling of 9 with 13, followed by deprotection, afforded pentasaccharide 19, while condensation of 9 with 5, followed by deallylation and trichloroacetimidate formation, gave the tetrasaccharide donor 16, whose coupling with 10 and subsequent deprotection yielded another pentasaccharide 22.     

MM3 potential energy surfaces of trisaccharides. II. Carrageenan models containing 3,6-anhydro-D-galactose

The adiabatic potential energy surfaces (PES) of six trisaccharides-namely 3,6-An-alpha-D-Galp-(1-->3)-beta-D-Galp-(1-->4)-3,6-An-alpha-D-Galp, beta-D-Galp-(1-->4)-3,6-An-alpha-D-Galp-(1-->3)-beta-D-Galp, and their derivatives sulfated on positions 2 and 4 of the beta-galactose unit-were obtained using the MM3 force field. Each PES was described by a single contour map for which the energy is plotted against the two psi glycosidic angles, given the small variations of the phi glycosidic torsional angle in the low-energy regions of disaccharide maps. In five of the six examples, the surfaces are those expected from the maps of the disaccharidic repeating units of carrageenans, with less important factors altering the additive effect of both linkages. However, when a sulfate group is present on C2 of a beta-galactose reducing end, a new low-energy minimum in a different region is produced, originated in a hydrogen bond between the first and third monosaccharidic moieties of the trisaccharide. The flexibility of the beta-linkages is nearly identical to that in their disaccharide counterparts, while that of the alpha-linkages is slightly reduced, independent of their presence closer or further away from the reducing end. A fair agreement is observed between the x-ray fiber diffraction analysis for a kappa-carrageenan double helix and the surfaces obtained for the trisaccharide analogs of that polymer.     

Bioproduction of low-pigment xanthan gum by a cell-wall deficient mutant of Xanthomonas campestris

Abstract

This work aims to enhance the bioproduction of xanthan gum by screening a hyper-yield producer from the wild-type Xanthomonas campestris during a long-term continuous subculture. We reported a cell-wall deficient mutant, which performed a shift of cell morphology from rod-shaped to round-shaped. Both the yield of xanthan gum and the conversion rate of feedstock were assessed using sucrose as a carbon source with the supplement of yeast extract powder, l-glutamic acid, and other raw materials. After 96?h aerobic fermentation, the yield of xanthan gum of the mutant reached up to 32?g/L, which was 3.4 times of that of the wild-type strain. The conversion rate of feedstock in the mutant was up to 92.1%, which was 3 times of that of the wild-type (31.2%). Furthermore, pigments generated were determined and compared. As a result, the fermentation broth of the wild-type performed an OD_560nm of 0.296, which was 5.8 times of that (OD_560nm?=?0.051) of the mutant. Microscopy analysis showed that the percentage of free-living cells in broth affected the color of the final product. Moreover, the robustness of the fermentation performance of the cell-wall deficient mutant at a pilot scale showed potential for industrial application.