Biokinetic parameters and behavior of <Emphasis Type="Italic">Aeromonas hydrophila</Emphasis> during anaerobic growth

The biokinetics of glucose metabolism were evaluated in Aeromonas hydrophila during growth in an anaerobic biosystem. After approx 34 h growth, A. hydrophila metabolized 5,000 mg glucose l⁻¹ into the end-products ethanol, acetate, succinate and formate. The maximum growth rate, μ _m, half saturation coefficients, K _s, microbial yield coefficient, Y, cell mass decay rate coefficient, k _d, and substrate inhibition coefficient, K _si were 0.25 ± 0.03 h⁻¹, 118 ± 31 mg glucose l⁻¹, 0.12 μg DNA mg glucose⁻¹, 0.01 h⁻¹, and 3,108 ± 1,152 mg glucose l⁻¹, respectively. These data were used to predict the performance of a continuous growth system with an influent glucose concentration of 5,000 mg l⁻¹. Results of the analysis suggest that A. hydrophila will metabolize glucose at greater than 95% efficiency when hydraulic retention times (HRTs) exceed 7 h, whereas the culture is at risk of washing out at an HRT of 6.7 h.     

Fermentation of pretreated sugarcane bagasse hemicellulose hydrolysate to ethanol by <Emphasis Type="Italic">Pachysolen tannophilus</Emphasis>

Sugarcane bagasse hemicellulose hydrolysates, pretreated by either over-liming or electrodialysis and, supplemented with nutrient materials, were fermented to ethanol using Pachysolen tannophilus DW06. Compared with detoxification by over-liming, detoxification by electrodialysis decreased the loss of sugar and increased the acetic acid removal, leading to better fermentability. A batch culture with electrodialytically pretreated hydrolysate as substrate was developed giving 21 g ethanol l⁻¹ with a yield of 0.35 g g⁻¹ sugar and productivity of 0.59 g l⁻¹ h⁻¹.     

Ethanol production from sweet sorghum juice in batch and fed-batch fermentations by <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis>

Sweet sorghum juice supplemented with 0.5% ammonium sulphate was used as a substrate for ethanol production by Saccharomyces cerevisiae TISTR 5048. In batch fermentation, kinetic parameters for ethanol production depended on initial cell and sugar concentrations. The optimum initial cell and sugar concentrations in the batch fermentation were 1 × 10⁸ cells ml⁻¹ and 24 °Bx respectively. At these conditions, ethanol concentration produced (P), yield (Y _ps) and productivity (Q _p ) were 100 g l⁻¹, 0.42 g g⁻¹ and 1.67 g l⁻¹ h⁻¹ respectively. In fed-batch fermentation, the optimum substrate feeding strategy for ethanol production at the initial sugar concentration of 24 °Bx was one-time substrate feeding, where P, Y _ps and Q _p were 120 g l⁻¹, 0.48 g g⁻¹ and 1.11 g l⁻¹ h⁻¹ respectively. These findings suggest that fed-batch fermentation improves the efficiency of ethanol production in terms of ethanol concentration and product yield.     

Application of oscillation for efficiency improvement of continuous ethanol fermentation with Saccharomyces cerevisiae under very-high-gravity conditions

Compared with steady state, oscillation in continuous very-high-gravity ethanol fermentation with Saccharomyces cerevisiae improved process productivity, which was thus introduced for the fermentation system composed of a tank fermentor followed by four-stage packed tubular bioreactors. When the very-high-gravity medium containing 280 g l⁻¹ glucose was fed at the dilution rate of 0.04 h⁻¹, the average ethanol of 15.8% (v/v) and residual glucose of 1.5 g l⁻¹ were achieved under the oscillatory state, with an average ethanol productivity of 2.14 g h⁻¹ l⁻¹. By contrast, only 14.8% (v/v) ethanol was achieved under the steady state at the same dilution rate, and the residual glucose was as high as 17.1 g l⁻¹, with an ethanol productivity of 2.00 g h⁻¹ l⁻¹, indicating a 7% improvement under the oscillatory state. When the fermentation system was operated under the steady state at the dilution rate of 0.027 h⁻¹ to extend the average fermentation time to 88 h from 59 h, the ethanol concentration increased slightly to 15.4% (v/v) and residual glucose decreased to 7.3 g l⁻¹, correspondingly, but the ethanol productivity was decreased drastically to 1.43 g h⁻¹ l⁻¹, indicating a 48% improvement under the oscillatory state at the dilution rate of 0.04 h⁻¹.     

Repeated Batch Cultivation of Ralstonia eutropha for Poly (β-hydroxybutyrate) Production

Batch cultivation of Ralstonia eutropha NRRL B14690 attained 21 g biomass l⁻¹ and 9.4 g poly(β-hydroxybutyrate) l⁻¹ (0.45 g PHB g⁻¹ dry wt⁻¹) in 60 h. Repeated batch operation (empty-and-fill protocol) to remove 20% (v/v) of the culture broth and to supplement an equal volume of fresh media resulted in 49 g biomass l⁻¹ and 25 g PHB l⁻¹ (0.51 g PHB g⁻¹ dry wt⁻¹) with an overall productivity of 0.42 g PHB l⁻¹ h⁻¹ in 67 h. In the two cycles of repeated batch fermentation there was a 3-fold increase in productivity as compared to batch.     

Carbon-limited fed-batch production of medium-chain-length polyhydroxyalkanoates from nonanoic acid by <Emphasis Type="Italic">Pseudomonas putida</Emphasis> KT2440

Pseudomonas putida KT2440 grew on glucose at a specific rate of 0.48 h⁻¹ but accumulated almost no poly-3-hydroxyalkanoates (PHA). Subsequent nitrogen limitation on nonanoic acid resulted in the accumulation of only 27% medium-chain-length PHA (MCL-PHA). In contrast, exponential nonanoic acid-limited growth (μ = 0.15 h⁻¹) produced 70 g l⁻¹ biomass containing 75% PHA. At a higher exponential feed rate (μ = 0.25 h⁻¹), the overall productivity was increased but less biomass (56 g l⁻¹) was produced due to higher oxygen demand, and the biomass contained less PHA (67%). It was concluded that carbon-limited exponential feeding of nonanoic acid or related substrates to cultures of P. putida KT2440 is a simple and highly effective method of producing MCL-PHA. Nitrogen limitation is unnecessary.     

Very high ethanol productivity in an innovative continuous two-stage bioreactor with cell recycle

The performance of an innovative two-stage continuous bioreactor with cell recycle—potentially capable of giving very high ethanol productivity—was investigated. The first stage was dedicated to cell growth, whereas the second stage was dedicated to ethanol production. A high cell density was obtained by an ultrafiltration module coupled to the outlet of the second reactor. A recycle loop from the second stage to the first one was tested to improve cell viability and activity. Cultivations of Saccharomyces cerevisiae in mineral medium on glucose were performed at 30°C and pH 4. At steady state, total biomass concentrations of 59 and 157 gDCW l⁻¹ and ethanol concentrations of 31 and 65 g l⁻¹ were obtained in the first and second stage, respectively. The residual glucose concentration was 73 g l⁻¹ in the first stage and close to zero in the second stage. The present study shows that a very high ethanol productivity (up to 41 g l⁻¹ h⁻¹) can indeed be obtained with complete conversion of the glucose and with a high ethanol titre (8.3°GL) in the two-stage system.     

Bioethanol production in batch mode by a native strain of <Emphasis Type="Italic">Zymomonas mobilis</Emphasis>

Two wild strains of Zymomonas mobilis were isolated (named as ML1 and ML2) from sugar cane molasses obtained from different farms of Santander, Colombia. Initially, selection of the best ethanol-producer strains was carried out using ethanol production parameters obtained with a commercial strain Z. mobilis DSM 3580. Three isolated strains were cultivated in a culture medium containing yeast extract, peptone, glucose and salts, at pH 6 and 32°C with stirring rate of 65 rpm during 62 h. The best results of ethanol production were obtained with the native strain ML1, reaching a maximum ethanol concentration of 79.78 g l⁻¹. ML1 and ML2 strains were identified as Z. mobilis, according to the morphology, biochemical tests and molecular characterization by PCR of specific DNA sequences from Z. mobilis. Subsequently, the effect of different nitrogen sources on production of ethanol was evaluated. The best results were obtained using urea at a 0.73 g/l. In this case, maximum concentration of ethanol was 83.81 g l⁻¹, with kinetic parameters of yield of ethanol on biomass (Y_P/X) = 69.01(g g⁻¹), maximum volumetric productivity of ethanol (Qp_max) = 2.28 (g l⁻¹ h⁻¹), specific productivity of ethanol (q_P) = 3.54 (h⁻¹) and specific growth rate (μ) = 0.12 h⁻¹. Finally, we studied the effect of different culture conditions (pH, temperature, stirring, C/N ratio) with a Placket-Burman′s experimental design. This optimization indicated that the most significant variables were temperature and stirring. In the best culture conditions a significant increase in all variables of response was achieved, reaching a maximum ethanol concentration of 93.55 g l⁻¹.     

Alcoholic fermentation of xylose and mixed sugars using recombinant <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> engineered for xylose utilization

Previously, a Saccharomyces cerevisiae strain was engineered for xylose assimilation by the constitutive overexpression of the Orpinomyces xylose isomerase, the S. cerevisiae xylulokinase, and the Pichia stipitis SUT1 sugar transporter genes. The recombinant strain exhibited growth on xylose, under aerobic conditions, with a specific growth rate of 0.025 h⁻¹, while ethanol production from xylose was achieved anaerobically. In the present study, the developed recombinant yeast was adapted for enhanced growth on xylose by serial transfer in xylose-containing minimal medium under aerobic conditions. After repeated batch cultivations, a strain was isolated which grew with a specific growth rate of 0.133 h⁻¹. The adapted strain could ferment 20 g l⁻¹ of xylose to ethanol with a yield of 0.37 g g⁻¹ and production rate of 0.026 g l⁻¹ h⁻¹. Raising the fermentation temperature from 30°C to 35°C resulted in a substantial increase in the ethanol yield (0.43 g g⁻¹) and production rate (0.07 g l⁻¹ h⁻¹) as well as a significant reduction in the xylitol yield. By the addition of a sugar complexing agent, such as sodium tetraborate, significant improvement in ethanol production and reduction in xylitol accumulation was achieved. Furthermore, ethanol production from xylose and a mixture of glucose and xylose was also demonstrated in complex medium containing yeast extract, peptone, and borate with a considerably high yield of 0.48 g g⁻¹.     

Production of ascorbic acid glucoside by alginate-entrapped mycelia of <Emphasis Type="Italic">Aspergillus niger</Emphasis>

The mycelia of Aspergillus niger, cultivated in a medium containing 45 g l⁻¹ maltose, 66 g l⁻¹ yeast extract, and 5 g l⁻¹ K₂HPO₄ at 30°C and 200 rpm, were used as a biocatalyst in the glucosylation of ascorbic acid. Free mycelia from 3-day-old culture, when used in a 6-h reaction with maltose as the acyl donor, gave 16.07 g l⁻¹ ascorbic acid glucoside corresponding to a volumetric productivity of 2.68 g l⁻¹ h⁻¹ and a conversion of 67%. Mycelia from 3-day-old cultures were entrapped in calcium alginate beads and used as a catalyst in the glucosylation of ascorbic acid. An ascorbic acid-to-maltose molar ratio of 1:9 was found to be optimum, and the conversion reached 75% after 12 h. The concentration of ascorbic acid glucoside produced at this molar ratio was 17.95 g l⁻¹, and the productivity was 1.5 g l⁻¹ h⁻¹. The biocatalyst was repeatedly used in a fixed bed bioreactor for the synthesis of ascorbic acid glucoside and approximately 17 g l⁻¹ of ascorbic acid glucoside corresponding to a volumetric productivity of 1.42 g l⁻¹ h⁻¹ was produced in each use. The conversion was retained at 70% in each use. The entrapped mycelia also exhibited exceptionally high reusability and storage stability. The product was purified to 85% by anion exchange and gel permeation chromatography with a final yield of 75%.     

Optimization of dilution rate for the production of value added product and simultaneous reduction of organic load from pineapple cannery waste

Candida utiilis NRRL Y-900 was grown on pineapple cannery waste as the sole carbon and energy source in a chemostat at dilution rates ranging between 0.05 and 0.65 h⁻¹ to determine the growth kinetics. The cell yield coefficient varied with dilution rate and a maximum value of 0.662 ± 0.002 g_x/g_carb was obtained at a dilution rate of 0.4 h⁻¹. At steady state, the concentrations of carbohydrate, reducing sugar, and chemical oxygen demand (COD) appeared to follow Monod kinetics. At maximum specific growth rate (μ_max) 0.65 h⁻¹, the saturation constants for carbohydrate, reducing sugar and COD were 0.51 ± 0.02 g_carb/1, 0.046 ± 0.003 g_rs/1, and 1.036 ± 0.001 g_COD/1, respectively. Maximum biomass productivity (Q _{x max}) 2.8 ± 0.03 g_x/1 h was obtained at a dilution rate of 0.5 h⁻¹. At this dilution rate, only 71.0 ± 0.41% COD was removed whereas at a dilution rate of 0.1 h⁻¹, 98.2 ± 0.35% reduction in COD was achieved. At a dilution rate of 0.4 h⁻¹, the optimal yeast productivity and reduction in COD were 2.7 ± 0.13 g_p/1 h, and 84.2 ± 0.42%, respectively. This revised version was published online in July 2006 with corrections to the Cover Date.     

Production of 1,3-Propanediol by Clostridium butyricum VPI 3266 in continuous cultures with high yield and productivity

The effects of dilution rate and substrate feed concentration on continuous glycerol fermentation by Clostridium butyricum VPI 3266, a natural 1,3-propanediol producer, were evaluated in this work. A high and constant 1,3-propanediol yield (around 0.65 mol/mol), close to the theoretical value, was obtained irrespective of substrate feed concentration or dilution rate. Improvement of 1,3-propanediol volumetric productivity was achieved by increasing the dilution rate, at a fixed feed substrate concentration of 30, 60 or 70 g l⁻¹. Higher 1,3-propanediol final concentrations and volumetric productivities were also obtained when glycerol feed concentration was increased from 30 to 60 g l⁻¹, at D=0.05–0.3 h⁻¹, and from 60–70 g l⁻¹, at D=0.05 and 0.1 h⁻¹·30 g l⁻¹ of 1,3-propanediol and the highest reported value of productivity, 10.3 g l⁻¹ h⁻¹, was achieved at D=0.30 h⁻¹ and 60 g l⁻¹ of feed glycerol. A switch to an acetate/butyrate ratio higher than one was observed for 60 g l⁻¹ of feed glycerol and a dilution rate higher than 0.10 h⁻¹; moreover, at D=0.30 h⁻¹ 3-hydroxypropionaldehyde accumulation was observed for the first time in the fermentation broth of C. butyricum.     

Kinetic studies of constitutive human granulocyte-macrophage colony stimulating factor (hGM-CSF) expression in continuous culture of <Emphasis Type="Italic">Pichia pastoris</Emphasis>

Extracellular human granulocyte-macrophage colony stimulating factor (hGM-CSF) expression was studied under the control of the GAP promoter in recombinant Pichia pastoris in a series of continuous culture runs (dilution rates from 0.025 to 0.2 h⁻¹). The inlet feed concentration was also varied and the steady state biomass concentration increased proportionally demonstrating efficient substrate utilization and constancy of the biomass yield coefficient (Y_x/s) for a given dilution rate. The specific product formation rate (q_P) showed a strong correlation with dilution rates demonstrating growth associated product formation of hGM-CSF. The volumetric product concentration achieved at the highest feed concentration (4×) and a dilution rate of 0.2 h⁻¹ was 82 mg l⁻¹ which was 5-fold higher compared to the continuous culture run with 1× feed concentration at the lowest dilution rate thus translating to a 40 fold increase in the volumetric productivity. The specific product yield (Y_P/X) increased slightly from 2 to 2.5 mg g⁻¹, with increasing dilution rates, while it remained fairly invariant, for all feed concentrations demonstrating negligible product degradation or feed back inhibition. The robust nature of this expression system would make it easily amenable to scale up for industrial production.     

Comparison of SHF and SSF processes for the bioconversion of steam-exploded wheat straw

Two processes for ethanol production from wheat straw have been evaluated — separate hydrolysis and fermentation (SHF) and simultaneous saccharification and fermentation (SSF). The study compares the ethanol yield for biomass subjected to varying steam explosion pretreatment conditions: temperature and time of pretreatment was 200°C or 217°C and at 3 or 10 min. A rinsing procedure with water and NaOH solutions was employed for removing lignin residues and the products of hemicellulose degradation from the biomass, resulting in a final structure that facilitated enzymatic hydrolysis. Biomass loading in the bioreactor ranged from 25 to 100 g l⁻¹ (dry weight). The enzyme-to-biomass mass ratio was 0.06. Ethanol yields close to 81% of theoretical were achieved in the two-step process (SHF) at hydrolysis and fermentation temperatures of 45°C and 37°C, respectively. The broth required addition of nutrients. Sterilisation of the biomass hydrolysate in SHF and of reaction medium in SSF can be avoided as can the use of different buffers in the two stages. The optimum temperature for the single-step process (SSF) was found to be 37°C and ethanol yields close to 68% of theoretical were achieved. The SSF process required a much shorter overall process time (≈30 h) than the SHF process (96 h) and resulted in a large increase in ethanol productivity (0.837 g l⁻¹ h⁻¹ for SSF compared to 0.313 g l⁻¹ h⁻¹ for SHF). Journal of Industrial Microbiology & Biotechnology (2000) 25, 184–192. Received 02 December 1999/ Accepted in revised form 20 July 2000     

Increase of ethanol productivity by cell-recycle fermentation of flocculating yeast

Using the recombinant flocculating Angel yeast F6, long-term repeated batch fermentation for ethanol production was performed and a high volumetric productivity resulted from half cells not washed and the optimum opportunity of residual glucose 20 g l⁻¹ of last medium. The obtained highest productivity was 2.07 g l⁻¹ h⁻¹, which was improved by 75.4% compared with that of 1.18 g l⁻¹ h⁻¹ in the first batch fermentation. The ethanol concentration reached 8.4% corresponding to the yield of 0.46 g g⁻¹. These results will contribute greatly to the industrial production of fuel ethanol using the commercial method with the flocculating yeast.     

Acetaldehyde mediates growth stimulation of ethanol-stressed <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis>: evidence of a redox-driven mechanism

The ability of acetaldehyde (90 mg l⁻¹) to stimulate ethanol-stressed S. cerevisiae fermentations is examined and reasons for the effect explored. Alternative metabolic electron acceptors generated similar stimulatory effects to acetaldehyde, decreasing the ethanol-induced growth lag phase from 9 h to 3 h, suggesting a redox-driven effect. The exposure to ethanol caused an instant 60% decline in intracellular NAD⁺ which was largely prevented by the addition of acetaldehyde. Furthermore, the exposure to ethanol affected glycolysis by decreasing the rate of glucose utilisation from 0.33 g glucose g⁻¹ biomass h⁻¹ to 0.11 g glucose g⁻¹ biomass h⁻¹, while the addition of acetaldehyde to an ethanol stressed culture increased this rate to 0.14 g glucose g⁻¹ biomass h⁻¹.     

Effects of feed sugar concentration on continuous ethanol fermentation of cheese whey powder solution (CWP)

Cheese whey powder (CWP) solution with different CWP or sugar concentrations was fermented to ethanol in a continuous fermenter using pure culture of Kluyveromyces marxianus (DSMZ 7239). Sugar concentration of the feed CWP solution varied between 55 and 200 g l⁻¹ while the hydraulic residence time (HRT) was kept constant at 54 h. Ethanol formation, sugar utilization and biomass formation were investigated as functions of the feed sugar concentration. Percent sugar utilization and biomass concentrations decreased and the effluent sugar concentration increased with increasing feed sugar concentrations especially for the feed sugar contents above 100 g l⁻¹. Ethanol concentration and productivity (DP) increased with increasing feed sugar up to 100 g l⁻¹ and then decreased with further increases in the feed sugar content. The highest ethanol concentration (3.7%, v v⁻¹) and productivity (0.54 gE l⁻¹ h⁻¹) were obtained with the feed sugar content of 100 g l⁻¹ or 125 g l⁻¹. The ethanol yield coefficient (Y_P/S) was also maximum (0.49 gE gS⁻¹) when the feed sugar was between 100 and 125 g l⁻¹. The growth yield coefficient (Y_X/S) decreased steadily from 0.123 to 0.063 gX gS⁻¹ when the feed sugar increased from 55 to 200 g l⁻¹ due to adverse effects of high sugar contents on yeast growth. The optimal feed sugar concentration maximizing the ethanol productivity and sugar utilization was between 100 and 125 g l⁻¹ under the specified experimental conditions.     

Production of lipase by high cell density fed-batch culture of Candida cylindracea

Candida cylindracea NRRL Y-17506 was grown to produce extracellular lipase from oleic acid as a carbon source. Through flask cultures, it was found that the optimum initial oleic acid concentration for cell growth was 20 g l⁻¹. However, high initial concentrations of oleic acid up to 50 g l⁻¹ were not inhibitory. The highest extracellular lipase activity obtained in flask culture was 3.0 U ml⁻¹ after 48 h with 5 g l⁻¹ of initial oleic acid concentration. Fed-batch cultures (intermittent and stepwise feeding) were carried out to improve cell concentration and lipase activity. For the intermittent feeding fed-batch culture, the final cell concentration was 52 g l⁻¹ and the extracellular lipase activity was 6.3 U ml⁻¹ at 138.5 h. Stepwise feeding fed-batch cultures were carried out to simulate an exponential feeding and to investigate the effects of specific growth rate (0.02, 0.04 and 0.08 h⁻¹) on cell growth and lipase production. The highest final cell concentration obtained was 90 g l⁻¹ when the set point of specific growth rate (μ_set) was 0.02 h⁻¹. High specific growth rate (0.04 and 0.08 h⁻¹) decreased extracellular lipase production in the later part of fed-batch cultures due to build-up of the oleic acid oversupplied. The highest extracellular lipase activity was 23.7 U ml⁻¹ when μ_set was 0.02 h⁻¹, while the highest lipase productivity was 0.31 U ml⁻¹ h⁻¹ at μ_set of 0.08 h⁻¹.     

Betaine Tripled the Volumetric Productivity of d(-)-lactate by Escherichia coli Strain SZ132 in Mineral Salts Medium

Osmotic stress restricts glycolytic flux, growth (rate and yield), d-lactate productivity, and d-lactate tolerance in Escherichia coli B strain SZ132 during batch fermentation in mineral salts medium with 10% (w/v) sugar. Addition of 1 mm betaine, a non-metabolized protective osmolyte, doubled cell yield, increased specific productivity of d-lactate and glycolytic flux by 50%, and tripled volumetric productivity (from 8.6 to 25.7 mmol l⁻¹ h⁻¹; 0.8 to 2.3 g l⁻¹ h⁻¹). Glycolytic flux and specific productivity in mineral salts medium with betaine exceeded that in Luria broth, substantially eliminating the need for complex nutrients during d-lactate production. In mineral salts medium supplemented with betaine, SZ132 produced approximately 1 mol d-lactate (90 g) per 100 g sugar (glucose or sucrose). Revisions requested 17 January 2006; Revisions received 7 February 2006     

Supplementation requirements of brewery’s spent grain hydrolysate for biomass and xylitol production by Debaryomyces hansenii CCMI 941

The effect of nutrient supplementation of brewery’s spent grain (BSG) hydrolysates was evaluated with respect to biomass and xylitol production by Debaryomyces hansenii. For optimal biomass production, supplementation of full-strength BSG hydrolysates required only phosphate (0.5 g l⁻¹ KH₂PO₄), leading to a biomass yield and productivity of 0.60 g g⁻¹ monosaccharides and 0.55 g l⁻¹ h⁻¹, respectively. Under the conditions studied, no metabolic products other than CO₂ and biomass were identified. For xylitol production, fourfold and sixfold concentrated hydrolysate-based media were used to assess the supplementation effects. The type of nutrient supplementation modulated the ratio of total polyols/total extracellular metabolites as well as the xylitol/arabitol ratio. While the former varied from 0.8 to 1, the xylitol/arabitol ratio reached a maximum value of 2.6 for yeast extract (YE)-supplemented hydrolysates. The increase in xylitol productivity and yield was related to the increase of the percentage of consumed xylose induced by supplementation. The best xylitol yield and productivity were found for YE supplementation corresponding to 0.55 g g⁻¹ and 0.36 g l⁻¹ h⁻¹, respectively. In sixfold concentrated hydrolysates, providing that the hydrolysate was supplemented, the levels of xylitol produced were similar or higher than those for arabitol. Xylitol yield exhibited a further increase in the sixfold hydrolysate supplemented with trace elements, vitamins and minerals to 0.65 g g⁻¹, albeit the xylitol productivity was somewhat lower. The effect of using activated charcoal detoxification in non-supplemented versus supplemented sixfold hydrolysates was also studied. Detoxification did not improve polyols formation, suggesting that the hemicellulose-derived inhibitor levels present in concentrated BSG hydrolysates are well tolerated by D. hansenii.