Phage Display of an Intracellular Carboxylesterase of Bacillus subtilis: Comparison of Sec and Tat Pathway Export Capabilities

Using the phage display technology, a protein can be displayed at the surface of bacteriophages as a fusion to one of the phage coat proteins. Here we describe development of this method for fusion of an intracellular carboxylesterase of Bacillus subtilis to the phage minor coat protein g3p. The carboxylesterase gene was cloned in the g3p-based phagemid pCANTAB 5E upstream of the sequence encoding phage g3p and downstream of a signal peptide-encoding sequence. The phage-bound carboxylesterase was correctly folded and fully enzymatically active, as determined from hydrolysis of the naproxen methyl ester with K_m values of 0.15 mM and 0.22 mM for the soluble and phage-displayed carboxylesterases, respectively. The signal peptide directs the encoded fusion protein to the cell membrane of Escherichia coli, where phage particles are assembled. In this study, we assessed the effects of several signal peptides, both Sec dependent and Tat dependent, on the translocation of the carboxylesterase in order to optimize the phage display of this enzyme normally restricted to the cytoplasm. Functional display of Bacillus carboxylesterase NA could be achieved when Sec-dependent signal peptides were used. Although a Tat-dependent signal peptide could direct carboxylesterase translocation across the inner membrane of E. coli, proper assembly into phage particles did not seem to occur.     

MAPPING OF HIV-1 GAG EPITOPES RECOGNIZED BY POLYCLONAL ANTIBODIES USING GENE-FRAGMENT PHAGE DISPLAY SYSTEM

Phage display has emerged as a powerful technique for mapping epitopes recognised by monoclonal and polyclonal antibodies. We have recently developed a simple gene-fragment phage display system and have shown its utility in mapping epitope recognised by a monoclonal antibody. In the present study, we have employed this system in mapping epitopes recognised by polyclonal antibodies raised against HIV-1 capsid protein, p24 which is derived from proteolytic cleavage of Gag polyprotein. HIV-1 gag DNA was fragmented by DNase I and the fragments (50–250 bp) were cloned into gene-fragment phage display vector to construct a library of phages displaying peptides. This phage library was used for affinity selection of phages displaying epitopes recognised by rabbit anti-p24 polyclonal antibodies. Selected phages contained sequences from two discrete regions of p24, demonstrating the presence of two antigenic regions.

The DNA sequences encoding these regions were also cloned and expressed as GST fusion proteins. The immunoreactivity of these epitopes as GST fusion proteins, or as phage-displayed peptides, was comparable in ELISA system using same anti-p24 polyclonal antibodies. The results indicate that the gene-fragment based phage display system can be used efficiently to identify epitopes recognised by polyclonal antibodies, and phage displayed epitopes can be directly employed in ELISA to detect antibodies.     

Engineering M13 for phage display

Phage display is achieved by fusing polypeptide libraries to phage coat proteins. The resulting phage particles display the polypeptides on their surfaces and they also contain the encoding DNA. Library members with particular functions can be isolated with simple selections and polypeptide sequences can be decoded from the encapsulated DNA. The technology's success depends on the efficiency with which polypeptides can be displayed on the phage surface, and significant progress has been made in engineering M13 bacteriophage coat proteins as improved phage display platforms. Functional display has been achieved with all five M13 coat proteins, with both N- and C-terminal fusions. Also, coat protein mutants have been designed and selected to improve the efficiency of heterologous protein display, and in the extreme case, completely artificial coat proteins have been evolved specifically as display platforms. These studies demonstrate that the M13 phage coat is extremely malleable, and this property can be used to engineer the phage particle specifically for phage display. These improvements expand the utility of phage display as a powerful tool in modern biotechnology.     

Phage display of an intracellular carboxylesterase of Bacillus subtilis: comparison of Sec and Tat pathway export capabilities

Using the phage display technology, a protein can be displayed at the surface of bacteriophages as a fusion to one of the phage coat proteins. Here we describe development of this method for fusion of an intracellular carboxylesterase of Bacillus subtilis to the phage minor coat protein g3p. The carboxylesterase gene was cloned in the g3p-based phagemid pCANTAB 5E upstream of the sequence encoding phage g3p and downstream of a signal peptide-encoding sequence. The phage-bound carboxylesterase was correctly folded and fully enzymatically active, as determined from hydrolysis of the naproxen methyl ester with Km values of 0.15 mM and 0.22 mM for the soluble and phage-displayed carboxylesterases, respectively. The signal peptide directs the encoded fusion protein to the cell membrane of Escherichia coli, where phage particles are assembled. In this study, we assessed the effects of several signal peptides, both Sec dependent and Tat dependent, on the translocation of the carboxylesterase in order to optimize the phage display of this enzyme normally restricted to the cytoplasm. Functional display of Bacillus carboxylesterase NA could be achieved when Sec-dependent signal peptides were used. Although a Tat-dependent signal peptide could direct carboxylesterase translocation across the inner membrane of E. coli, proper assembly into phage particles did not seem to occur.     

Signal sequences directing cotranslational translocation expand the range of proteins amenable to phage display

Even proteins that fold well in bacteria are frequently displayed poorly on filamentous phages. Low protein presentation on phage might be caused by premature cytoplasmic folding, leading to inefficient translocation into the periplasm. As translocation is an intermediate step in phage assembly, we tested the display levels of a range of proteins using different translocation pathways by employing different signal sequences. Directing proteins to the cotranslational signal recognition particle (SRP) translocation pathway resulted in much higher display levels than directing them to the conventional post-translational Sec translocation pathway. For example, the display levels of designed ankyrin-repeat proteins (DARPins) were improved up to 700-fold by simply exchanging Sec- for SRP-dependent signal sequences. In model experiments this exchange of signal sequences improved phage display from tenfold enrichment to >1,000-fold enrichment per phage display selection round. We named this method 'SRP phage display' and envision broad applicability, especially when displaying cDNA libraries or very stable and fast-folding proteins from libraries of alternative scaffolds.     

Phage display as a novel screening method to identify extracellular proteins

Extracellular proteins are involved in many diverse and essential cell functions and in pathogenic bacteria, and they may also serve as virulence factors. Therefore, there is a need for methods that identify the genes encoding this group of proteins in a bacterial genome. Here, we present such a method based on the phage display technology. A novel gene III-based phagemid vector, pG3DSS, was constructed that lacks the signal sequence which normally orientates the encoded fusion protein to the Escherichia coli cell membrane, where it is assembled into the phage particle. When randomly fragmented DNA is inserted into this vector, only phagemids containing an insert encoding a signal sequence will give rise to phage particles displaying a fusion protein. These phages also display an E-tag epitope in fusion with protein III, which enables isolation of phages displaying a fusion protein, using antibodies against the epitope. From a library constructed from Staphylococcus aureus chromosomal DNA, genes encoding secreted as well as transmembrane proteins were isolated, including adhesins, enzymes and transport proteins.     

Mapping of linear epitopes recognized by monoclonal antibodies with gene-fragment phage display libraries

Epitope mapping with mono- or polyclonal antibodies has so far been done either by dissecting the antigens into overlapping polypeptides in the form of recombinantly expressed fusion proteins, or by synthesizing overlapping short peptides, or by a combination of both methods. Here, we report an alternative method which involves the generation of random gene fragments of approximately 50–200 by in length and cloning these into the 5 terminus of the protein III gene of fd phages. Selection for phages that bind a given monoclonal antibody and sequencing the DNA inserts of immunopositive phages yields derived amino acid sequences containing the desired epitope. A monoclonal antibody (mAb 215) directed against the largest subunit of Drosophila RNA polymerase II (RPB215) was used to map the corresponding epitope in a fUSE5 phage display library made of random DNA fragments from plasmid DNA containing the entire gene. After a single round of panning with this phage library, bacterial colonies were obtained which produced fd phages displaying the mAb 215 epitope. Sequencing of single-stranded phage DNA from a number of positive colonies (recognized by the antibody on colony immunoblots) resulted in overlapping sequences all containing the 15mer epitope determined by mapping with synthetic peptides. Similarly, we have localized the epitopes recognized by a mouse monoclonal antibody directed against the human p53 protein, and by a mouse monoclonal antibody directed against the human cytokeratin 19 protein. Identification of positive colonies after the panning procedure depends on the detection system used (colony immunoblot or ELISA) and there appear to be some restrictions to the use of linker-encoded amino acids for optimal presentation of epitopes. A comparison with epitope mapping by synthetic peptides shows that the phage display method allows one to map linear epitopes down to a size only slightly larger than the true epitope. In general, our phage display method is faster, easier, and cheaper than the construction of overlapping fusion proteins or the use of synthetic peptides, especially in cases where the antigen is a large polypeptide such as the 215 kDa subunit of eukaryotic RNA polymerase II.     

The molecular basis for genetic polymorphism of human deoxyribonuclease II (DNase II): a single nucleotide substitution in the promoter region of human DNase II changes the promoter activity

We report that, contrary to common belief, polypeptides fused to the carboxy-terminus of the M13 gene-3 minor coat protein are functionally displayed on the phage surface. In a phagemid display system, carboxy-terminal fusion through optimized linker sequences resulted in display levels comparable to those achieved with conventional amino-terminal fusions. These findings are of considerable importance to phage display technology because they enable investigations not suited to amino-terminal display, including the study of protein–protein interactions requiring free carboxy-termini, functional cDNA cloning efforts, and the display of intracellular proteins.     

Characterization of Vibrio cholerae bacteriophage K139 and use of a novel mini-transposon to identify a phage-encoded virulence factor

Temperate bacteriophage K139 was isolated from a Vibrio cholerae O139 isolate and characterized in this study. The phage genome consists of a 35 kbp, double-stranded, linear DNA molecule that circularizes and integrates into the chromosome in a site-specific manner. DNA sequences that cross-hybridize with K139 phage DNA are present in all strains of V. cholerae serogroup O1 of the classical biotype examined and in some strains of the El Tor biotype. Phage K139 produces plaques on El Tor O1 strains that do not carry the K139-related sequences but does not plaque on O139 strains that lack detectable phage DNA. This results suggests that O139 strains arose in part by horizontal gene transfer of the O139 antigen genes into an El Tor O1 strain that harboured a K139 prophage. Consistent with this interpretation, the morphology of K139 phage particles is identical to that displayed by the widely distributed family of O1 phages referred to as ‘kappa’. In order to test whether K139 phage is involved in lysogenic conversion of V. cholerae, we constructed a novel mini-transposon, Tn10d-bla, which was designed to produce β-lactamase fusions to phage-encoded, exported proteins. All Tn 10d-bla insertions obtained were closely linked to one location on the K139 phage genome. DNA sequence determination of the fusion joints revealed an open reading frame (ORF1), encoding a gene product of 137 amino acids with a typical N-terminal hydrophobic signal sequence. ORF1 was designated the glo gene (G protein-like O RF) because its amino acid sequence shows similarity to eukaryotic Gs(α) protein (34.5% identity over an 81-amino-acid overlap) and its C-terminus displays the consensus motif (CAAX) which is found in many small eukaryotic GTP-binding proteins. LD₅₀ assays with isogenic Glo⁺ and Glo^? K139 lysogens suggest that glo encodes a secreted virulence determinant of V. cholerae     

Identification of extracytoplasmic proteins in Bradyrhizobium japonicum using phage display

A novel gene bank of Bradyrhizobium japonicum USDA110spc4 was constructed using pG3DSS, a phagemid vector designed for detecting genes encoding secreted proteins. In this phagemid, the phage protein III lacks its indigenous signal peptide required for protein secretion, thus recombinant fusion proteins are displayed on the phage surface only if a functional signal peptide is provided by an inserted DNA fragment. In addition, the N-terminal half of protein III has been replaced by a short linker region (the E-tag) that is recognized by a monoclonal antibody, which enables isolation of phages displaying a fusion protein. The expression library described here, therefore, provides a powerful means to affinity select for B. japonicum genes encoding extracytoplasmic proteins. In total, 182 DNA sequences were analyzed, among which 132 different putative extracytoplasmic proteins could be identified. The function of most proteins could be predicted and support an extracytoplasmic localization. In addition, genes encoding novel extracytoplasmic proteins were found. In particular, a novel family of small proteins has been identified that is characterized by a conserved pattern of four cysteine residues.     

Mapping of hiv-1 Gag epitopes recognized by polyclonal antibodies using gene-fragment phage display system.

Phage display has emerged as a powerful technique for mapping epitopes recognised by monoclonal and polyclonal antibodies. We have recently developed a simple gene-fragment phage display system and have shown its utility in mapping epitope recognised by a monoclonal antibody. In the present study, we have employed this system in mapping epitopes recognised by polyclonal antibodies raised against HIV-1 capsid protein, p24 which is derived from proteolytic cleavage of Gag polyprotein. HIV-1 gag DNA was fragmented by DNase I and the fragments (50-250 bp) were cloned into gene-fragment phage display vector to construct a library of phages displaying peptides. This phage library was used for affinity selection of phages displaying epitopes recognised by rabbit anti-p24 polyclonal antibodies. Selected phages contained sequences from two discrete regions of p24, demonstrating the presence of two antigenic regions. The DNA sequences encoding these regions were also cloned and expressed as GST fusion proteins. The immunoreactivity of these epitopes as GST fusion proteins, or as phage-displayed peptides, was comparable in ELISA system using same anti-p24 polyclonal antibodies. The results indicate that the gene-fragment based phage display system can be used efficiently to identify epitopes recognised by polyclonal antibodies, and phage displayed epitopes can be directly employed in ELISA to detect antibodies.     

Design, construction and function of a multicopy display vector using fusions to the major coat protein of bacteriophage M13.

Incorporation of numerous copies of a heterologous protein (bovine pancreatic trypsin inhibitor; BPTI) fused to the mature major coat protein (gene VIII product; VIII) of bacteriophage M13 has been demonstrated. Optimization of the promoter, signal peptide and host bacterial strain allowed for the construction of a working vector consisting of the M13 genome, into which was cloned a synthetic gene composed of a lac (or tac) promoter, and sequences encoding the bacterial alkaline phosphatase signal peptide, mature BPTI and the mature coat protein. Processing of the BPTI-VIII fusion protein and its incorporation into the bacteriophage were found to be maximal in a host bacterial strain containing a prlA/secY mutation. Functional protein is displayed on the surface of M13 phage, as judged by specific interactions with antiserum, anhydrotrypsin, and trypsin. Such display vectors can be used for epitope mapping, production of artificial vaccines and the screening of diverse libraries of proteins or peptides having affinity for a chosen ligand. The VIII display phage system has practical advantages over the III display phage system in that many more copies of the fusion protein can be displayed per phage particle and the presence of the VII fusion protein has little or no effect on the infectivity of the resulting bacteriophage.     

Construction of a Novel <Emphasis Type="Italic">Pichia pastoris</Emphasis> Cell-Surface Display System Based on the Cell Wall Protein Pir1

A novel system based on Pir1 from Saccharomyces cerevisiae was developed for cell-surface display of heterologous proteins in Pichia pastoris with the alpha-factor secretion signal sequence. As a model protein, enhanced green fluorescence protein (EGFP) was fused to the N-terminal of the mature peptide of Pir1 (Pir1-a). The expression of fusion protein EGFP-Pir1-a was irregular throughout the P. pastoris cell surface per detection by confocal laser scanning microscopy. A truncated sequence containing only the internal repetitive sequences of Pir1-a (Pir1-b) was used as a new anchor protein in further study. The fusion protein EGFP-Pir1-b was expressed uniformly on the cell surface. The fluorescence intensity of the whole yeast was measured by spectrofluorometer. Western blot confirmed that the fusion proteins were released from cell walls after mild alkaline treatment. The results indicate that a Pir1-based system can express proteins on the surface of P. pastoris and that the fusion proteins do not affect the manner in which Pir1 attaches to the cell wall. The repetitive sequences of Pir1 are required for cell wall retention, and the C-terminal sequence contributes to the irregular distribution of fusion proteins in P. pastoris.     

High-density functional display of proteins on bacteriophage lambda

We designed a bacteriophage lambda system to display peptides and proteins fused at the C terminus of the head protein gpD of phage lambda. DNA encoding the foreign peptide/protein was first inserted at the 3' end of a DNA segment encoding gpD under the control of the lac promoter in a plasmid vector (donor plasmid), which also carried lox P(wt) and lox P(511) recombination sequences. Cre-expressing cells were transformed with this plasmid and subsequently infected with a recipient lambda phage that carried a stuffer DNA segment flanked by lox P(wt) and lox P(511) sites. Recombination occurred in vivo at the lox sites and Amp(r) cointegrates were formed. The cointegrates produced recombinant phage that displayed foreign protein fused at the C terminus of gpD. The system was optimised by cloning DNA encoding different length fragments of HIV-1 p24 (amino acid residues 1-72, 1-156 and 1-231) and the display was compared with that obtained with M13 phage. The display on lambda phage was at least 100-fold higher than on M13 phage for all the fragments with no degradation of displayed products. The high-density display on lambda phage was superior to that on M13 phage and resulted in selective enrichment of epitope-bearing clones from gene-fragment libraries. Single-chain antibodies were displayed in functional form on phage lambda, strongly suggesting that correct disulphide bond formation takes place during display.This lambda phage display system, which avoids direct cloning into lambda DNA and in vitro packaging, achieved cloning efficiencies comparable to those obtained with any plasmid system. The high-density display of foreign proteins on bacteriophage lambda should be extremely useful in studying low-affinity protein-protein interactions more efficiently compared to the M13 phage-based system.     

Expanding the versatility of phage display I: efficient display of peptide-tags on protein VII of the filamentous phage

Background

Phage display is a platform for selection of specific binding molecules and this is a clear-cut motivation for increasing its performance. Polypeptides are normally displayed as fusions to the major coat protein VIII (pVIII), or the minor coat protein III (pIII). Display on other coat proteins such as pVII allows for display of heterologous peptide sequences on the virions in addition to those displayed on pIII and pVIII. In addition, pVII display is an alternative to pIII or pVIII display.

Methodology/Principal Findings

Here we demonstrate how standard pIII or pVIII display phagemids are complemented with a helper phage which supports production of virions that are tagged with octa FLAG, HIS₆ or AviTag on pVII. The periplasmic signal sequence required for pIII and pVIII display, and which has been added to pVII in earlier studies, is omitted altogether.

Conclusions/Significance

Tagging on pVII is an important and very useful add-on feature to standard pIII and pVII display. Any phagemid bearing a protein of interest on either pIII or pVIII can be tagged with any of the tags depending simply on choice of helper phage. We show in this paper how such tags may be utilized for immobilization and separation as well as purification and detection of monoclonal and polyclonal phage populations.     

Detection of a Phage Genome Carrying a Zonula Occludens like Toxin Gene (zot) in clinical isolates of Stenotrophomonas maltophilia

During a study of the genetic diversity of Stenotrophomonas strains, we found an autonomous replicating DNA molecule in chromosomal DNA preparations of the clinical Stenotrophomonas maltophilia strain c5. The entire sequence of 6,907 bp of the isolated DNA molecule was determined, which was called φSMA9. Seven ORFs, which code for proteins with considerable similarity to proteins in databases, were identified in the DNA sequence. The largest ORF shows high sequence similarities to the pI protein of the filamentous phage φLf, which was later shown to be identical to toxin Zot of Vibrio cholerae. Beside the Zot-like protein, six other proteins with similarities to known phage proteins such as a phage replication protein RstA and phage absorption or coat protein are encoded on φSMA9, which indicate that this circular DNA molecule represents the replicative form of a linear phage genome. A PCR-based screening showed that only five from the totally investigated 47 Stenotrophomonas strains of clinical and environmental origin harbor these genes. Altogether, we describe the first genome of a phage for the nosocomial pathogen Stenotrophomonas, which contains a Zot toxin like gene and might be regarded as the first Stenotrophomonas virulence factor.     

Parameters of in vitroEvolution of Proteins and Peptides

In vitroevolution is used to study protein sequences, structures, and interactions and to obtain proteins with new properties. To analyze the specific features of this process in phage display experiments, we studied the amino acid composition of selected sequences, constructed a matrix of amino acid substitutions, and identified pairs of coadaptive substitutions. The amino acid frequency proved to be tightly associated with the number of corresponding codons; numerous correlated substitutions were found.     

A survey of furin substrate specificity using substrate phage display.

The substrate specificity of furin, a mammalian enzyme involved in the cleavage of many constitutively expressed protein precursors, was studied using substrate phage display. In this method, a multitude of substrate sequences are displayed as fusion proteins on filamentous phage particles and ones that are cleaved can be purified by affinity chromatography. The cleaved phage are propagated and submitted to additional rounds of protease selection to further enrich for good substrates. DNA sequencing of the cleaved phage is used to identify the substrate sequence. After 6 rounds of sorting a substrate phage library comprising 5 randomized amino acids (xxxxx), virtually all clones had an RxxR motif and many had Lys, Arg, or Pro before the second Arg. Nine of the selected sequences were assayed using a substrate-alkaline phosphatase fusion protein system. All were cleaved after the RxxR, and some substrates with Pro or Thr in P2 were also found to be cleaved as efficiently as RxKR or RxRR. To further elaborate surrounding determinants, we constructed 2 secondary libraries (xxRx(K/R)Rx and xxRxPRx). Although no consensus developed for the latter library, many of the sequences in the the former library had the 7-residue motif (L/P)RRF(K/R)RP, suggesting that the furin recognition sequence may extend over more than 4 residues. These studies further clarify the substrate specificity of furin and suggest the substrate phage method may be useful for identifying consensus substrate motifs in other protein processing enzymes.     

Adapter-Directed Display: A Modular Design for Shuttling Display on Phage Surfaces

A novel adapter-directed phage display system was developed with modular features. In this system, the target protein is expressed as a fusion protein consisting of adapter GR1 from the phagemid vector, while the recombinant phage coat protein is expressed as a fusion protein consisting of adapter GR2 in the helper phage vector. Surface display of the target protein is accomplished through specific heterodimerization of GR1 and GR2 adapters, followed by incorporation of the heterodimers into phage particles. A series of engineered helper phages were constructed to facilitate both display valency and formats, based on various phage coat proteins. As the target protein is independent of a specific phage coat protein, this modular system allows the target protein to be displayed on any given phage coat protein and allows various display formats from the same vector without the need for reengineering. Here, we demonstrate the shuttling display of a single-chain Fv antibody on phage surfaces between multivalent and monovalent formats, as well as the shuttling display of an antigen-binding fragment molecule on phage coat proteins pIII, pVII, and pVIII using the same phagemid vectors combined with different helper phage vectors. This adapter-directed display concept has been applied to eukaryotic yeast surface display and to a novel cross-species display that can shuttle between prokaryotic phage and eukaryotic yeast systems.     

Genetic screen for signal peptides in Hydra reveals novel secreted proteins and evidence for non-classical protein secretion

We have screened a Hydra cDNA library for sequences encoding N-terminal signal peptides using the yeast invertase secretion vector pSUC [Jacobs et al., 1997. A genetic selection for isolating cDNAs encoding secreted proteins. Gene 198, 289–296]. We isolated and sequenced 907 positive clones; 88% encoded signal peptides; 12% lacked signal peptides. By searching the Hydra EST database we identified full-length sequences for the selected clones. These encoded 37 known proteins with signal peptides and 40 novel Hydra-specific proteins with signal peptides. Localization of two signal peptide-containing sequences, VEGF and ferritin, to the secretory pathway was confirmed with GFP fusion proteins. In addition, we isolated 105 clones which lacked signal peptides but which supported invertase secretion from yeast. Isolation of plasmids from these clones and retransformation in invertase-negative yeast cells confirmed the phenotype. A GFP fusion protein of one such clone encoding the foot morphogen pedibin was localized to the cytoplasm in transfected Hydra cells and did not enter the ER/Golgi secretory pathway. Secretion of pedibin and other proteins lacking signal peptides appears to occur by a non-classical protein secretion route.