The protonation-deprotonation kinetics of the protonated Schiff base in bicelle bacteriorhodopsin crystals

In the recently published x-ray crystal structure of the "bicelle" bacteriorhodopsin (bbR) crystal, the protein has quite a different structure from the native and the in cubo bacteriorhodopsin (cbR) crystal. Instead of packing in parallel trimers as do the native membrane and the cbR crystals, in the bbR crystal the protein packs as antiparallel monomers. To date, no functional studies have been performed, to our knowledge, to investigate if the photocycle is observed in this novel protein packing structure. In this study, both Raman and time-resolved transient absorption spectroscopy are used to both confirm the presence of the photocycle and investigate the deprotonation-reprotonation kinetics of the Schiff base proton in the bbR crystal. The observed rates of deprotonation and reprotonation processes of its Schiff base have been compared to those observed for native bR under the same conditions. Unlike the previously observed similarity of the rates of these processes for cbR crystals and those for native bacteriorhodopsin (bR), in bbR crystals the rate of deprotonation has increased by 300%, and the rate of reprotonation has decreased by nearly 700%. These results are discussed in light of the changes observed when native bR is delipidated or monomerized by detergents. Both the change of the hydrophobicity of the environment around the protonated Schiff base and Asp85 and Asp96 (which could change the pKa values of proton donor-acceptor pairs) and the water structure in the bbR crystal are offered as possible explanations for the different observations.     

Kinetic resonance Raman spectroscopy of carotenoids: A sensitive kinetic monitor of bacteriorhodopsin mediated membrane potential changes

A rapid (14 – 22 μs) light-induced, bacteriorhodopsin mediated membrane potential has been detected using the technique of kinetic resonance Raman spectroscopy and the model system of β-carotene incorporated into reconstituted vesicles containing bacteriorhodopsin. Our data demonstrate that the kinetic resonance Raman spectrum of β-carotene is an extremely sensitive monitor of kinetic alterations in membrane potential with micron spatial resolution in a highly scattering medium. In addition, our Raman results indicate that the potential sensitivity of β-carotene is an excited state property of the molecule, thus making it an electrochromic monitor of membrane potential. We feel the techniques illustrated in this paper have the advantage of being a native probe of kinetic membrane potential changes and will be applicable to a wide variety of biological systems without the perturbing side-effects which often accompany the use of non-biological, potential-sensitive dyes.     

Structural determinants of purple membrane assembly

The purple membrane is a two-dimensional crystalline lattice formed by bacteriorhodopsin and lipid molecules in the cytoplasmic membrane of Halobacterium salinarum. High-resolution structural studies, in conjunction with detailed knowledge of the lipid composition, make the purple membrane one of the best models for elucidating the forces that are responsible for the assembly and stability of integral membrane protein complexes. In this review, recent mutational efforts to identify the structural features of bacteriorhodopsin that determine its assembly in the purple membrane are discussed in the context of structural, calorimetric and reconstitution studies. Quantitative evidence is presented that interactions between transmembrane helices of neighboring bacteriorhodopsin molecules contribute to purple membrane assembly. However, other specific interactions, particularly between bacteriorhodopsin and lipid molecules, may provide the major driving force for assembly. Elucidating the molecular basis of protein-protein and protein-lipid interactions in the purple membrane may provide insights into the formation of integral membrane protein complexes in other systems.     

Structure and thermal stability of monomeric bacteriorhodopsin in mixed phospholipid/detergent micelles

Thermal unfolding experiments on bacteriorhodopsin in mixed phospholipid/detergent micelles were performed. Bacteriorhodopsin was extracted from the purple membrane in a denatured state and then renatured in the micellar system. The purpose of this study was to compare the changes, if any, in the structure and stability of a membrane protein that has folded in a nonnative environment with results obtained on the native system, i.e., the purple membrane. The purple membrane crystalline lattice is an added factor that may influence the structural stability of bacteriorhodopsin. Micelles containing bacteriorhodopsin are uniformly sized disks 105 +/- 13 A in diameter (by electron microscopy) and have an estimated molecular mass of 210 kDa (by gel filtration HPLC). The near-UV CD spectra (which is indicative of tertiary structure) for micellar bacteriorhodopsin and the purple membrane are very similar. In the visible CD region of retinal absorption, the double band seen in the spectrum of the purple membrane is replaced with a broad positive band for micellar bacteriorhodopsin, indicating that in micelles, bacteriorhodopsin is monomeric. The plot of denaturational temperature vs. pH for micellar bacteriorhodopsin is displaced downward on the temperature axis, illustrating the lower thermal stability of micellar bacteriorhodopsin when compared to the purple membrane at the same pH. Even though micellar bacteriorhodopsin is less stable, similar changes in response to pH and temperature are seen in the visible absorption spectra of micellar bacteriorhodopsin and the purple membrane. This demonstrates that changes in the protonation state or temperature have a similar affect on the local environment of the chromophore and the protein conformation.(ABSTRACT TRUNCATED AT 250 WORDS)     

Functional cell-free synthesis of a seven helix membrane protein: in situ insertion of bacteriorhodopsin into liposomes

The expression of membrane proteins for functional and structural studies or medicinal applications is still not very well established. Membrane-spanning proteins that mediate the information flow of the extracellular side with the interior of the cell are prime targets for drug development methods that would allow screening techniques or high throughput formats are of particular interest. Here we describe a systematic approach to the liposome-assisted cell-free synthesis of functional membrane proteins. We demonstrate the synthesis of bacteriorhodopsin (bR(cf)) in presence of small unilamellar liposomes. The yield of bR(cf) per volume cell culture is comparable to that of bacteriorhodopsin in its native host. The functional analysis of bR(cf) was performed directly using the cell-free reaction mixture. Photocycle measurements reveal kinetic data similar to that determined for bR in Halobacterium salinarum cell-envelope vesicles. The liposomes can be attached directly to black lipid membranes (BLM), which allows measuring light activated photocurrents in situ. The results reveal a functional proton pump with properties identical to those established for the native protein.     

Purple membrane vesicles: morphology and proton translocation.

Purple membrane vesicles prepared by different techniques differ widely in their morphology and ability to establish a proton gradient in the light. The procedures used to prepare active vesicles do not completely dissociate the purple membrane and thus preserve a preferential orientation of the protein, while most of the lipid is exchanged for added lipid. Responses to illumination are largely determined by the size of the vesicles and the degree to which bacteriorhodopsin is preferentially oriented. Any attempt to compare the interaction of different lipids with bacteriorhodopsin by measuring the pH response must take these factors into account. With an improved technique we have obtained vesicles of rather uniform size and bacteriorhodopsin orientation, which accumulate protons with an initial rate of 160 ng H+ sec-1 mg-1 protein at light intensities of 10(6) erg cm-2 sec-1. The kinetics of the process are complex and at present insufficiently understood.     

Insertion of bacteriorhodopsin into polymerized diacetylenic phosphatidylcholine bilayers

We have developed a method to incorporate the membrane protein bacteriorhodopsin into polymerized bilayers composed of a diacetylenic phosphatidylcholine, 1,2-bis(tricosa-10,12-diynoyl)-sn-glycero-3-phosphocholine (DC8,9PC) and a non-polymerizable phospholipid, dinonanoylphosphatidylcholine (DNPC). The extent of DC8,9PC polymerization in the bilayer was significantly improved when 2:1 mole ratio DNPC-DC8,9PC was used. Octyl glucopyranoside-solubilized bacteriorhodopsin was inserted into the polymerized DNPC-DC8,9PC bilayers by overnight incubation at 4 degrees C followed by dialysis to remove the detergent. The protein was inserted into the membranes after photo-polymerization to avoid inactivation of the protein due to the UV irradiation. The insertion of bacteriorhodopsin into the polymerized DNPC-DC8,9PC membranes was confirmed by density gradient centrifugation, UV/visible spectroscopy, and freeze fracture electron microscopy. The polymerized DNPC-DC8,9PC membranes containing bacteriorhodopsin were about 10% protein by weight. These results suggest that mixed lipid systems such as the DNPC-DC8,9PC can be used to improve both the extent of polymerization and the efficiency of membrane protein incorporation in the polymerized bilayer.     

Genetic transfer of the pigment bacteriorhodopsin into the eukaryote Schizosaccharomyces pombe

The gene encoding for bacterio-opsin (bop gene) from Halobacterium halobium has been introduced in a yeast expression vector. After transformation in Schizosaccharomyces pombe, bacterio-opsin (BO) is expressed and was detected by antisera. The precursor protein of BO (pre-BO) is processed by cleavage of amino acids at the N-terminal end as in H. halobium. Addition of the chromophore, retinal, to the culture medium results in a slight purple colour of the yeast cells indicating the in vivo regeneration of BO to bacteriorhodopsin (BR) and its incorporation into membranes. Therefore, in contrast to the expression in E. coli, isolation of the membrane protein and reconstitution in lipid vesicles is not necessary for functional analysis. The kinetics of the ground state signal of the photocycle BR in protoplasts is demonstrated by flash spectroscopy and is comparable to that of the natural system. The present investigation shows for the first time the transfer of an energy converting protein from archaebacteria to eukaryotes by genetic techniques. This is a basis for further studies on membrane biogenesis, genetics, and bioenergetics by analysis of in vivo active mutants.     

Time-resolved microspectroscopy on a single crystal of bacteriorhodopsin reveals lattice-induced differences in the photocycle kinetics

The determination of the intermediate state structures of the bacteriorhodopsin photocycle has lead to an unprecedented level of understanding of the catalytic process exerted by a membrane protein. However, the crystallographic structures of the intermediate states are only relevant if the working cycle is not impaired by the crystal lattice. Therefore, we applied visible and Fourier transform infrared spectroscopy (FTIR) microspectroscopy with microsecond time resolution to compare the photoreaction of a single bacteriorhodopsin crystal to that of bacteriorhodopsin residing in the native purple membrane. The analysis of the FTIR difference spectra of the resolved intermediate states reveals great similarity in structural changes taking place in the crystal and in PM. However, the kinetics of the photocycle are significantly altered in the three-dimensional crystal as compared to PM. Strikingly, the L state decay is accelerated in the crystal, whereas the M decay is delayed. The physical origin of this deviation and the implications for trapping of intermediate states are discussed. As a methodological advance, time-resolved step-scan FTIR spectroscopy on a single protein crystal is demonstrated for the first time which may be used in the future to gauge the functionality of other crystallized proteins with the molecular resolution of vibrational spectroscopy.     

Spatial organization of bacteriorhodopsin in model membranes. Light-induced mobility changes

Bacteriorhodopsin is a proton-transporting membrane protein in Halophilic archaea, and it is considered a prototype of membrane transporters and a model for G-protein-coupled receptors. Oligomerization of the protein has been reported, but it is unknown whether this feature is correlated with, for instance, light activation. Here, we have addressed this issue by reconstituting bacteriorhodopsin into giant unilamellar vesicles. The dynamics of the fully active protein was investigated using fluorescence correlation spectroscopy and freeze fracture electron microscopy. At low protein-to-lipid ratios (<1:10 w/w), a decrease in mobility was observed upon protein photoactivation. This process occurred on a second time scale and was fully reversible, i.e. when the dark-adapted state was reestablished the lateral diffusion rate of the protein was returned to that prior to activation. A similar decrease in lateral mobility as observed upon photoactivation was obtained when bacteriorhodopsin was reconstituted at high protein-to-lipid ratios (>1:10 w/w). We interpret the shifts in mobility during light adaptation as being caused by transient photoinduced oligomerization of bacteriorhodopsin. These observations are fully supported by freeze-fracture electron microscopy, and the size of the clusters during photoactivation was estimated to consist of two or three trimers.     

Production of functional bacteriorhodopsin by an Escherichia coli cell‐free protein synthesis system supplemented with steroid detergent and lipid

Cell‐free expression has become a highly promising tool for the efficient production of membrane proteins. In this study, we used a dialysis‐based Escherichia coli cell‐free system for the production of a membrane protein actively integrated into liposomes. The membrane protein was the light‐driven proton pump bacteriorhodopsin, consisting of seven transmembrane α‐helices. The cell‐free expression system in the dialysis mode was supplemented with a combination of a detergent and a natural lipid, phosphatidylcholine from egg yolk, in only the reaction mixture. By examining a variety of detergents, we found that the combination of a steroid detergent (digitonin, cholate, or CHAPS) and egg phosphatidylcholine yielded a large amount (0.3–0.7 mg/mL reaction mixture) of the fully functional bacteriorhodopsin. We also analyzed the process of functional expression in our system. The synthesized polypeptide was well protected from aggregation by the detergent‐lipid mixed micelles and/or lipid disks, and was integrated into liposomes upon detergent removal by dialysis. This approach might be useful for the high yield production of functional membrane proteins.     

Group-directed modification of bacteriorhodopsin by arylisothiocyanates. Labeling, identification of the binding site and topology

Group-directed hydrophobic modification of membrane-integrated protein segments by arylisothiocyanates is applied to bacteriorhodopsin. Labeling of purple membrane with phenylisothiocyanate and 4-N,N'-dimethylamino-azobenzene-4'-isothiocyanate results in covalent modification of a unique lysine epsilon-amino group of bacteriorhodopsin. Lysine residue 41, located in the amino-terminal chymotryptic fragment, has been identified as the arylisothiocyanate binding site by established sequencing techniques. The phenylisothiocyanate binding site is not accessible for the aqueously soluble analog p-sulfophenylisothiocyanate. Furthermore, the acid-induced bathochromic shift of the bound chromophore reagent is not observed following acidification of 4-N,N'-dimethylamino-azobenzene-4'-isothiocyanate-labeled purple membrane. The modification thus occurs in the hydrophobic membrane domain, providing further evidence for intramembraneous disposition of the modified protein segment. Light-induced proton translocation is preserved in reconstituted vesicles containing either phenylisothiocyanate-modified or 4-N,N'-dimethylamino-azobenzene-4'-isothiocyanate-modified bacteriorhodopsin.     

Protein-chromophore interactions in bacteriorhodopsin: the effects of a change in surface potential.

The chromophore retinal is bound to bacteriorhodopsin via a protonated Schiff base linkage. The retinal binding site is reported to be buried in the transmembrane portion of the protein, distant from the membrane surfaces. When bound to bacteriorhodopsin, the absorption maximum of retinal is red-shifted from 366 nm to 568 nm producing a purple color. This color persists across a wide pH range. However, when the pH is raised above 12.0, the membranes become pink in color, while at pH values of 3.0 or below, a blue color is produced. The blue color can also be obtained by removing the divalent cations bound to the surface of the protein. In this study, bacteriorhodopsin was examined by circular dichroism and absorption spectroscopy to determine if protein conformational changes were associated with the color shifts. It was found that although the retinal chromophore can be completely removed by bleaching with hydroxylamine with no significant influence on the secondary structure of the protein, a change in the surface charge of bacteriorhodopsin results in measurable conformational change in the protein, which apparently affects the nature of the retinal binding site.     

Segregation of modified bacteriorhodopsin aggregations in reconstituted vesicle membrane induced by the change of thermodynamical parameters

It was clearly shown that the change in thermodynamical parameters could cause the segregation of membrane protein aggregations in the phospholipid membrane. At first, reconstituted vesicles were prepared with a membrane protein, bacteriorhodopsin and a constituent phospholipid of biomembranes, L-alpha-dimyristoyl phosphatidylcholine. When the temperature of the suspension was decreased or the osmotic pressure was increased by adding poly(ethylene glycol) to this vesicle suspension at 23 degrees, the circular dichroism spectra showed a typical band indicating bacteriorhodopsin trimer formation implying their aggregation. This suggests that the aggregation of trimers proceeded by adding poly(ethylene glycol) into vesicle suspension, just as it proceeded by decreasing the temperature. Next, vesicles were prepared with fluorescein isothiocyanate-labeled bacteriorhodopsin, photoemissive bacteriorhodopsin and L-alpha-dimyristoyl phosphatidylcholine. The excitation energy transfer between the two modified proteins was measured by fluorescence spectroscopy. In this case, however, when poly(ethylene glycol) was added into the suspension, the yield of the excitation energy transfer decreased. This result indicates that modified proteins aggregate separately in a segregated form in the vesicle membrane.     

Structural characterization of the L-to-M transition of the bacteriorhodopsin photocycle.

Structural intermediates occurring in the photocycle of wild-type bacteriorhodopsin are trapped by illuminating hydrated, glucose-embedded purple membrane at 170 K, 220 K, 230 K, and 240 K. We characterize light-induced changes in protein conformation by electron diffraction difference Fourier maps, and relate these to previous work on photocycle intermediates by infrared (FTIR) spectroscopy. Samples illuminated at 170 K are confirmed by FTIR spectroscopy to be in the L state; a difference Fourier projection map shows no structural change within the 0.35-nm resolution limit of our data. Difference maps obtained with samples illuminated at 220 K, 230 K, and 240 K, respectively, reveal a progressively larger structural response in helix F when the protein is still in the M state, as judged by the FTIR spectra. Consistent with previous structural studies, an adjustment in the position or in the degree of ordering of helix G accompanies this motion. The model of the photocycle emerging from this and previous studies is that bacteriorhodopsin experiences minimal change in protein structure until a proton is transferred from the Schiff base to Asp85. The M intermediate then undergoes a conformational evolution that opens a hydrated "half-channel," allowing the subsequent reprotonation of the Schiff base by Asp96.     

A novel pattern recognition algorithm to classify membrane protein unfolding pathways with high-throughput single-molecule force spectroscopy

MOTIVATION: Misfolding of membrane proteins plays an important role in many human diseases such as retinitis pigmentosa, hereditary deafness and diabetes insipidus. Little is known about membrane proteins as there are only very few high-resolution structures. Single-molecule force spectroscopy is a novel technique, which measures the force necessary to pull a protein out of a membrane. Such force curves contain valuable information on the protein structure, conformation, and inter- and intra-molecular forces. High-throughput force spectroscopy experiments generate hundreds of force curves including spurious ones and good curves, which correspond to different unfolding pathways. Manual analysis of these data is a bottleneck and source of inconsistent and subjective annotation. RESULTS: We propose a novel algorithm for the identification of spurious curves and curves representing different unfolding pathways. Our algorithm proceeds in three stages: first, we reduce noise in the curves by applying dimension reduction; second, we align the curves with dynamic programming and compute pairwise distances and third, we cluster the curves based on these distances. We apply our method to a hand-curated dataset of 135 force curves of bacteriorhodopsin mutant P50A. Our algorithm achieves a success rate of 81% distinguishing spurious from good curves and a success rate of 76% classifying unfolding pathways. As a result, we discuss five different unfolding pathways of bacteriorhodopsin including three main unfolding events and several minor ones. Finally, we link folding barriers to the degree of conservation of residues. Overall, the algorithm tackles the force spectroscopy bottleneck and leads to more consistent and reproducible results paving the way for high-throughput analysis of structural features of membrane proteins.     

The photochemical cycle of bacteriorhodopsin.

The reaction cycle of bacteriorhodopsin in the purple membrane isolated from Halobacterium halobium has been studied by optical absorption spectroscopy using low-temperature and flash kinetic techniques. After absorption of light, bacteriohodopsin passes through at least five distinct intermediates. The temperature and pH dependence of the absorbance changes suggests that branch points and/or reversible steps exist in this cycle. Flash spectroscopy in the presence of a pH-indicating dye shows that the transient release of a proton accompanies the photoreaction cycle. The proton release occurs from the exterior and the uptake is on the cytoplasmic side of the membrane, as required by the function of bacteriorhodopsin as a light-driven proton pump. Proton translocating steps connecting release and uptake are indicated by deuterium isotope effects on the kinetics of the cycle. The rapid decay of a light-induced linear dichroism shows that a chromophore orientation change occurs during the reaction cycle.     

pH dependence of bacteriorhodopsin thermal unfolding

The thermal denaturation of bacteriorhodopsin in the purple membrane of Halobacterium halobium has been studied by differential scanning calorimetry (DSC) and temperature-dependent spectroscopy in the pH range from 5 to 11. Monitoring of protein fluorescence and absorbance in the near-UV and visible regions indicates that changes primarily occur in tertiary structure with denaturation. Far-UV circular dichroism shows only small changes in the secondary structure, unlike most globular water-soluble proteins of comparable molecular weight. The DSC transition can best be described as a two-state denaturation of the trimer. Thermodynamic analysis of the calorimetric transition reveals some similarity between the unfolding of bacteriorhodopsin and water-soluble proteins. Specifically, a pH dependence of the midpoint temperature of denaturation is seen as well as a temperature-dependent enthalpy of denaturation. Proteolysis experiments on denatured purple membrane suggest that bacteriorhodopsin may be partially extruded from the membrane as it denatures. Exposure of buried hydrophobic residues to the aqueous environment upon denaturation is consistent with the observed temperature-dependent enthalpy.     

Folding patterns of porin and bacteriorhodopsin.

Porin spans the outer membrane of Escherichia coli with most of the protein embedded within the membrane. It lacks pronounced hydrophobic domains and consists predominantly of beta-pleated sheet. These observations require the accommodation of polar and ionizable residues in an environment that has a low dielectric constant. Owing to a currently limited understanding of the constraints governing membrane protein structure, a minimal approach to structure prediction is proposed that identifies segments causing polypeptides to reverse their direction (turn identification). The application of this procedure avoids hydrophobicity parameters and yields a model of porin which is in good agreement with all experimental data available. The presence of polar and ionizable residues within membrane boundaries implies a dense (saturating) network of hydrogen bond donor and acceptor groups. Application to a paradigm of hydrophobic membrane proteins, bacteriorhodopsin, reveals a pattern consistent with its alpha-helical folding. The postulated structure includes significantly more polar residues in the membrane domain than have been assumed previously, suggesting that there are also hydrogen bonding networks in bacteriorhodopsin. Extensive networks permeating protein interior and surfaces would explain the extraordinary stability and the tight interactions between functional units in the formation of crystalline arrays of both proteins.     

菌紫质、磷脂与水的相互作用:红外光谱与吸附重量研究

应用紫膜等温吸附及红外差光谱技术研究细菌紫膜中水与蛋白、磷脂的相互作用.观察到酰胺Ⅰ、Ⅱ、Ⅲ带在R<0.05及0.08相似文献