Forces and factors that contribute to the structural stability of membrane proteins

While a considerable amount of literature deals with the structural energetics of water-soluble proteins, relatively little is known about the forces that determine the stability of membrane proteins. Similarly, only a few membrane protein structures are known at atomic resolution, although new structures have recently been described. In this article, we review the current knowledge about the structural features of membrane proteins. We then proceed to summarize the existing literature regarding the thermal stability of bacteriorhodopsin, cytochrome-c oxidase, the band 3 protein, Photosystem II and porins. We conclude that a fundamental difference between soluble and membrane proteins is the high thermal stability of intrabilayer secondary structure elements in membrane proteins. This property manifests itself as incomplete unfolding, and is reflected in the observed low enthalpies of denaturation of most membrane proteins. By contrast, the extramembranous parts of membrane proteins may behave much like soluble proteins. A brief general account of thermodynamics factors that contribute to the stability of water soluble and membrane proteins is presented.     

Overexpression of membrane proteins in mammalian cells for structural studies

Abstract

The number of structures of integral membrane proteins from higher eukaryotes is steadily increasing due to a number of innovative protein engineering and crystallization strategies devised over the last few years. However, it is sobering to reflect that these structures represent only a tiny proportion of the total number of membrane proteins encoded by a mammalian genome. In addition, the structures determined to date are of the most tractable membrane proteins, i.e., those that are expressed functionally and to high levels in yeast or in insect cells using the baculovirus expression system. However, some membrane proteins that are expressed inefficiently in these systems can be produced at sufficiently high levels in mammalian cells to allow structure determination. Mammalian expression systems are an under-used resource in structural biology and represent an effective way to produce fully functional membrane proteins for structural studies. This review will discuss examples of vertebrate membrane protein overexpression in mammalian cells using a variety of viral, constitutive or inducible expression systems.     

Benchmarking membrane protein detergent stability for improving throughput of high-resolution X-ray structures

Obtaining well-ordered crystals is a major hurdle to X-ray structure determination of membrane proteins. To facilitate crystal optimization, we investigated the detergent stability of 24 eukaryotic and prokaryotic membrane proteins, predominantly transporters, using a fluorescent-based unfolding assay. We have benchmarked the stability required for crystallization in small micelle detergents, as they are statistically more likely to lead to high-resolution structures. Using this information, we have been able to obtain well-diffracting crystals for a number of sodium and proton-dependent transporters. By including in the analysis seven membrane proteins for which structures are already known, AmtB, GlpG, Mhp1, GlpT, EmrD, NhaA, and LacY, it was further possible to demonstrate an overall trend between protein stability and structural resolution. We suggest that by monitoring membrane protein stability with reference to the benchmarks described here, greater efforts can be placed on constructs and conditions more likely to yield high-resolution structures.     

LCP-Tm: An Assay to Measure and Understand Stability of Membrane Proteins in a Membrane Environment

Structural and functional studies of membrane proteins are limited by their poor stability outside the native membrane environment. The development of novel methods to efficiently stabilize membrane proteins immediately after purification is important for biophysical studies, and is likely to be critical for studying the more challenging human targets. Lipidic cubic phase (LCP) provides a suitable stabilizing matrix for studying membrane proteins by spectroscopic and other biophysical techniques, including obtaining highly ordered membrane protein crystals for structural studies. We have developed a robust and accurate assay, LCP-T_m, for measuring the thermal stability of membrane proteins embedded in an LCP matrix. In its two implementations, protein denaturation is followed either by a change in the intrinsic protein fluorescence on ligand release, or by an increase in the fluorescence of a thiol-binding reporter dye that measures exposure of cysteines buried in the native structure. Application of the LCP-T_m assay to an engineered human β₂-adrenergic receptor and bacteriorhodopsin revealed a number of factors that increased protein stability in LCP. This assay has the potential to guide protein engineering efforts and identify stabilizing conditions that may improve the chances of obtaining high-resolution structures of intrinsically unstable membrane proteins.     

Molecular dynamics simulations and membrane protein structure quality

Despite a growing repertoire of membrane protein structures (currently ∼120 unique structures), considerations of low resolution and crystallization in the absence of a lipid bilayer require the development of techniques to assess the global quality of membrane protein folds. This is also the case for assessment of, e.g. homology models of human membrane proteins based on structures of (distant) bacterial homologues. Molecular dynamics (MD) simulations may be used to help evaluate the quality of a membrane protein structure or model. We have used a structure of the bacterial ABC transporter MsbA which has the correct transmembrane helices but an incorrect handedness and topology of their packing to test simulation methods of quality assessment. An MD simulation of the MsbA model in a lipid bilayer is compared to a simulation of another bacterial ABC transporter, BtuCD. The latter structure has demonstrated good conformational stability in the same bilayer environment and over the same timescale (20 ns) as for the MsbA model simulation. A number of comparative analyses of the two simulations were performed to assess changes in the structural integrity of each protein. The results show a significant difference between the two simulations, chiefly due to the dramatic structural deformations of MsbA. We therefore propose that MD could become a useful quality control tool for membrane protein structural biology. In particular, it provides a way in which to explore the global conformational stability of a model membrane protein fold.     

The Role of the Membrane in Transporter Folding and Activity

The synthesis, folding, and function of membrane transport proteins are critical factors for defining cellular physiology. Since the stability of these proteins evolved amidst the lipid bilayer, it is no surprise that we are finding that many of these membrane proteins demonstrate coupling of their structure or activity in some way to the membrane. More and more transporter structures are being determined with some information about the surrounding membrane, and computational modeling is providing further molecular details about these solvation structures. Thus, the field is moving towards identifying which molecular mechanisms - lipid interactions, membrane perturbations, differential solvation, and bulk membrane effects - are involved in linking membrane energetics to transporter stability and function. In this review, we present an overview of these mechanisms and the growing evidence that the lipid bilayer is a major determinant of the fold, form, and function of membrane transport proteins in membranes.     

Comparing four different approaches for the determination of inter‐residue interactions provides insight for the structure prediction of helical membrane proteins

Studying inter‐residue interactions provides insight into the folding and stability of both soluble and membrane proteins and is essential for developing computational tools for protein structure prediction. As the first step, various approaches for elucidating such interactions within protein structures have been proposed and proven useful. Since different approaches may grasp different aspects of protein structural folds, it is of interest to systematically compare them. In this work, we applied four approaches for determining inter‐residue interactions to the analysis of three distinct structure datasets of helical membrane proteins and compared their correlation to the three individual quality measures of structures in these datasets. These datasets included one of 35 structures of rhodopsin receptors and bacterial rhodopsins determined at various resolutions, one derived from the HOMEP benchmark dataset previously reported, and one comprising of 139 homology models. It was found that the correlation between the average number of inter‐residue interactions obtained by applying the four approaches and the available structure quality measures varied quite significantly among them. The best correlation was achieved by the approach focusing exclusively on favorable inter‐residue interactions. These results provide interesting insight for the development of objective quality measure for the structure prediction of helical membrane proteins. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 547–556, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Collection of soluble variants of membrane proteins for transcriptomics and proteomics

The existence of a soluble splice variant for a gene encoding a transmembrane protein suggests that this gene plays a role in intercellular signalling, particularly in immunological processes. Also, the absence of a splice variant of a reported soluble variant suggests exclusive control of the solubilisation by proteolytic cleavage. Soluble splice variants of membrane proteins may also be interesting targets for crystallisation as their structure may be expected to preserve, at least partially, their function as integral membrane proteins, whose structures are most difficult to determine. This paper presents a dataset derived from the literature in an attempt to collect all reported soluble variants of membrane proteins, be they splice variants or shedded. A list of soluble variants is derived in silico from Ensembl. These are checked on their presence in multiple organisms and their number of membranespanning regions is inspected. The findings then are confirmed by a comparison with identified proteins of a recent global proteomics study of human blood plasma. Finally, a tool to determine novel soluble variants by proteomics is provided.     

Triton X-100 extraction of P815 tumor cells: evidence for a plasma membrane skeleton structure

It has been shown that a Triton X-100-insoluble protein matrix can be isolated from the plasma membranes of P815 tumor cells and murine lymphoid cells (Mescher, M. F., M. J. L. Jose and S. P. Balk, 1981, Nature (Lond.), 289:139-144). The properties of the matrix suggested that this set of proteins might form a membrane skeletal structure, stable in the absence of the lipid bilayer. Since purification of plasma membrane results in yields of only 20 to 40%, it was not clear whether the matrix was associated with the entire plasma membrane. To determine if a detergent-insoluble structure was present over the entire cell periphery and stable in the absence of the membrane bilayer or cytoskeletal components, we have examined extraction of whole cells with Triton X-100. Using the same conditions as those used for isolation of the matrix from membranes, we found that extraction of intact cells resulted in structures consisting of a continuous layer of protein at the periphery, a largely empty cytoplasmic space, and a nuclear remnant. Little or no lipid bilayer structure was evident in association with the peripheral layer, and no filamentous cytoskeletal structures could be seen in the cytoplasmic space by thin-section electron microscopy. Analysis of these Triton shells showed them to retain approximately 15% of the total cell protein, most of which was accounted for by low molecular weight nuclear proteins. 5'- Nucleotidase, a cell surface enzyme that remains associated with the plasma membrane matrix, was quantitatively recovered with the shells. Included among the polypeptides present in the shells was a set with mobilities identical to those of the set that makes up the plasma membrane matrix. The polypeptide composition of the shells further confirmed that cytoskeletal proteins were present to a very low extent, if at all, after the extraction. The results demonstrate that a detergent-insoluble protein matrix associated with the periphery of these cells forms a continuous, intact macrostructure whose stability is independent of the membrane bilayer or filamentous cytoskeletal elements, and thus has the properties of a membrane skeletal structure. Although not yet directly demonstrated, the results also strongly suggest that this peripheral layer is composed of the previously described set of plasma membrane matrix proteins. This article discusses possible roles for this proposed membrane skeletal structure in stabilizing the membrane bilayer and affecting the dynamics of other membrane proteins.     

Predicting transmembrane beta-barrels and interstrand residue interactions from sequence

Transmembrane beta-barrel (TMB) proteins are embedded in the outer membrane of Gram-negative bacteria, mitochondria, and chloroplasts. The cellular location and functional diversity of beta-barrel outer membrane proteins (omps) makes them an important protein class. At the present time, very few nonhomologous TMB structures have been determined by X-ray diffraction because of the experimental difficulty encountered in crystallizing transmembrane proteins. A novel method using pairwise interstrand residue statistical potentials derived from globular (nonouter membrane) proteins is introduced to predict the supersecondary structure of transmembrane beta-barrel proteins. The algorithm transFold employs a generalized hidden Markov model (i.e., multitape S-attribute grammar) to describe potential beta-barrel supersecondary structures and then computes by dynamic programming the minimum free energy beta-barrel structure. Hence, the approach can be viewed as a "wrapping" component that may capture folding processes with an initiation stage followed by progressive interaction of the sequence with the already-formed motifs. This approach differs significantly from others, which use traditional machine learning to solve this problem, because it does not require a training phase on known TMB structures and is the first to explicitly capture and predict long-range interactions. TransFold outperforms previous programs for predicting TMBs on smaller (相似文献   

Maltose-neopentyl glycol (MNG) amphiphiles for solubilization, stabilization and crystallization of membrane proteins

The understanding of integral membrane protein (IMP) structure and function is hampered by the difficulty of handling these proteins. Aqueous solubilization, necessary for many types of biophysical analysis, generally requires a detergent to shield the large lipophilic surfaces of native IMPs. Many proteins remain difficult to study owing to a lack of suitable detergents. We introduce a class of amphiphiles, each built around a central quaternary carbon atom derived from neopentyl glycol, with hydrophilic groups derived from maltose. Representatives of this maltose-neopentyl glycol (MNG) amphiphile family show favorable behavior relative to conventional detergents, as manifested in multiple membrane protein systems, leading to enhanced structural stability and successful crystallization. MNG amphiphiles are promising tools for membrane protein science because of the ease with which they may be prepared and the facility with which their structures may be varied.     

A new method to model membrane protein structure based on silent amino acid substitutions.

The importance of accurately modeling membrane proteins cannot be overstated, in lieu of the difficulties in solving their structures experimentally. Often, however, modeling procedures (e.g., global searching molecular dynamics) generate several possible candidates rather then pointing to a single model. Herein we present a new approach to select among candidate models based on the general hypothesis that silent amino acid substitutions, present in variants identified from evolutionary conservation data or mutagenesis analysis, do not affect the stability of a native structure but may destabilize the non-native structures also found. The proof of this hypothesis has been tested on the alpha-helical transmembrane domains of two homodimers, human glycophorin A and human CD3-zeta, a component of the T-cell receptor. For both proteins, only one structure was identified using all the variants. For glycophorin A, this structure is virtually identical to the structure determined experimentally by NMR. We present a model for the transmembrane domain of CD3-zeta that is consistent with predictions based on mutagenesis, homology modeling, and the presence of a disulfide bond. Our experiments suggest that this method allows the prediction of transmembrane domain structure based only on widely available evolutionary conservation data.     

Membrane protein structural bioinformatics

Despite the increasing number of recently solved membrane protein structures, coverage of membrane protein fold space remains relatively sparse. This necessitates the use of computational strategies to investigate membrane protein structure, allowing us to further our understanding of how membrane proteins carry out their diverse range of functions, while aiding the development of novel predictive tools with which to probe uncharacterised folds. Analysis of known structures, the application of machine learning techniques, molecular dynamics simulations and protein structure prediction have enabled significant advances to be made in the field of membrane protein research. In this communication, the key bioinformatic methods that allow the characterisation of membrane proteins are reviewed, the tools available for the structural analysis of membrane proteins are presented and the contribution these tools have made to expanding our understanding of membrane protein structure, function and stability is discussed.     

Translocons, thermodynamics, and the folding of membrane proteins

Recent three-dimensional structures of helical membrane proteins present new challenges for the prediction of structure from amino acid sequence. Membrane proteins reside stably in a thermodynamic free energy minimum after release into the membrane's bilayer fabric from the translocon complex. This means that structure prediction is primarily a problem of physical chemistry. But the folding processes within the translocon must also be considered. A distilled overview of the physical principles of membrane protein stability is presented, and extended to encompass translocon-assisted folding.     

Selecting Optimum Eukaryotic Integral Membrane Proteins for Structure Determination by Rapid Expression and Solubilization Screening

A medium-throughput approach is used to rapidly identify membrane proteins from a eukaryotic organism that are most amenable to expression in amounts and quality adequate to support structure determination. The goal was to expand knowledge of new membrane protein structures based on proteome-wide coverage. In the first phase, membrane proteins from the budding yeast Saccharomyces cerevisiae were selected for homologous expression in S. cerevisiae, a system that can be adapted to expression of membrane proteins from other eukaryotes. We performed medium-scale expression and solubilization tests on 351 rationally selected membrane proteins from S. cerevisiae. These targets are inclusive of all annotated and unannotated membrane protein families within the organism's membrane proteome. Two hundred seventy-two targets were expressed, and of these, 234 solubilized in the detergent n-dodecyl-β-d-maltopyranoside. Furthermore, we report the identity of a subset of targets that were purified to homogeneity to facilitate structure determinations. The extensibility of this approach is demonstrated with the expression of 10 human integral membrane proteins from the solute carrier superfamily. This discovery-oriented pipeline provides an efficient way to select proteins from particular membrane protein classes, families, or organisms that may be more suited to structure analysis than others.     

Crystal structures of fusion proteins with large-affinity tags

The fusion of a protein of interest to a large-affinity tag, such as the maltose-binding protein (MBP), thioredoxin (TRX), or glutathione-S-transferase (GST), can be advantageous in terms of increased expression, enhanced solubility, protection from proteolysis, improved folding, and protein purification via affinity chromatography. Unfortunately, crystal growth is hindered by the conformational heterogeneity induced by the fusion tag, requiring that the tag is removed by a potentially problematic cleavage step. The first three crystal structures of fusion proteins with large-affinity tags have been reported recently. All three structures used a novel strategy to rigidly fuse the protein of interest to MBP via a short three- to five-amino acid spacer. This strategy has the potential to aid structure determination of proteins that present particular experimental challenges and are not conducive to more conventional crystallization strategies (e.g., membrane proteins). Structural genomics initiatives may also benefit from this approach as a way to crystallize problematic proteins of significant interest.     

Membrane Protein Structural Validation by Oriented Sample Solid-State NMR: Diacylglycerol Kinase

The validation of protein structures through functional assays has been the norm for many years. Functional assays perform this validation for water-soluble proteins very well, but they need to be performed in the same environment as that used for the structural analysis. This is difficult for membrane proteins that are often structurally characterized in detergent environments, although functional assays for these proteins are most frequently performed in lipid bilayers. Because the structure of membrane proteins is known to be sensitive to the membrane mimetic environment, such functional assays are appropriate for validating the protein construct, but not the membrane protein structure. Here, we compare oriented sample solid-state NMR spectral data of diacylglycerol kinase previously published with predictions of such data from recent structures of this protein. A solution NMR structure of diacylglycerol kinase has been obtained in detergent micelles and three crystal structures have been obtained in a monoolein cubic phase. All of the structures are trimeric with each monomer having three transmembrane and one amphipathic helices. However, the solution NMR structure shows typical perturbations induced by a micelle environment that is reflected in the predicted solid-state NMR resonances from the structural coordinates. The crystal structures show few such perturbations, especially for the wild-type structure and especially for the monomers that do not have significant crystal contacts. For these monomers the predicted and observed data are nearly identical. The thermostabilized constructs do show more perturbations, especially the A41C mutation that introduces a hydrophilic residue into what would be the middle of the lipid bilayer inducing additional hydrogen bonding between trimers. These results demonstrate a general technique for validating membrane protein structures with minimal data obtained from membrane proteins in liquid crystalline lipid bilayers by oriented sample solid-state NMR.     

Investigation of the utility of selective methyl protonation for determination of membrane protein structures

Polytopic alpha-helical membrane proteins present one of the final frontiers for protein structural biology, with significant challenges causing severe under-representation in the protein structure databank. However, with the advent of hardware and methodology geared to the study of large molecular weight complexes, solution NMR is being increasingly considered as a tool for structural studies of these types of membrane proteins. One method that has the potential to facilitate these studies utilizes uniformly deuterated samples with protons reintroduced at one or two methyl groups of leucine, valine and isoleucine. In this work we demonstrate that in spite of the increased proportion of these amino acids in membrane proteins, the quality of structures that can be obtained from this strategy is similar to that obtained for all alpha-helical water soluble proteins. This is partly attributed to the observation that NOEs between residues within the transmembrane helix did not have an impact on structure quality. Instead the most important factors controlling structure accuracy were the strength of dihedral angle restraints imposed and the number of unique inter-helical pairs of residues constrained by NOEs. Overall these results suggest that the most accurate structures will arise from accurate identification of helical segments and utilization of inter-helical distance restraints from various sources to maximize the distribution of long-range restraints.     

Alternative membrane protein conformations in alcohols

Alcohols modulate the oligomerization of membrane proteins in lipid bilayers. This can occur indirectly by redistributing lateral membrane pressure in a manner which correlates with alcohol hydrophobicity. Here we investigate the direct impact of different alcohol-water mixtures on membrane protein stability and solubility, using the two detergent-solubilized alpha-helical membrane proteins DsbB and NhaA. Both proteins precipitate extensively at intermediate concentrations of alcohols, forming states with extensive (40-60%) beta-sheet structure and affinity for the fibril-specific dye thioflavin T, although atomic force microscopy images reveal layer-like and spherical deposits, possibly early stages in a fibrillation process trapped by strong hydrophobic contacts. At higher alcohol concentrations, both DsbB and NhaA are resolubilized and form non-native structures with increased (DsbB) or decreased (NhaA) helicity compared to the native state. The alternative conformational states cannot be returned to the functional native state upon dilution of alcohol. The efficiency of precipitation and the degree to which DsbB is destabilized at low alcohol concentrations show the same correlation with alcohol hydrophobicity. Thus, in addition to their effect on the membrane, alcohols perturb membrane proteins directly by solvating the hydrophobic regions of the protein. At intermediate concentrations, this perturbation exposes hydrophobic segments but does not provide sufficient solvation to avoid intermolecular association. Resolubilization requires a reduction in the relative dielectric constant below 65 in conjunction with specific properties of the individual alcohols. We conclude that alcohols provide access to a diversity of conformations for membrane proteins but are not a priori suitable for solution studies requiring reversible denaturation of monomeric proteins.     

A lipidic-sponge phase screen for membrane protein crystallization

A major current deficit in structural biology is the lack of high-resolution structures of eukaryotic membrane proteins, many of which are key drug targets for the treatment of disease. Numerous eukaryotic membrane proteins require specific lipids for their stability and activity, and efforts to crystallize and solve the structures of membrane proteins that do not address the issue of lipids frequently end in failure rather than success. To help address this problem, we have developed a sparse matrix crystallization screen consisting of 48 lipidic-sponge phase conditions. Sponge phases form liquid lipid bilayer environments which are suitable for conventional hanging- and sitting-drop crystallization experiments. Using the sponge phase screen, we obtained crystals of several different membrane proteins from bacterial and eukaryotic sources. We also demonstrate how the screen may be manipulated by incorporating specific lipids such as cholesterol; this modification led to crystals being recovered from a bacterial photosynthetic core complex.